Control unit

SEW-Eurodrive KHF47 DT71D4/BMG/TF Motor SN 01.1200190101.0003.07

Condition: like new (used), Year of construction: 2017, functionality: fully functional, We are offering this as-new REDA CM/200 vacuum evaporator, year of manufacture 2017. Gbjdpfxjydfg Ne Anrol Manufacturer: REDA S.p.A. Model: CM/200 Serial number: 4142.031 200-054A Year of manufacture: 2017 Machine type: Vacuum evaporator Condition: As new If you have any questions or need further information, please feel free to contact us.

Condition: excellent (used), Used GRP flat-bottom wine tanks with two chambers and approx. 2% slope to the outlet capacity approx. 81.000 ltr. diameter approx. 3.000 mm total height approx. 11.000 mm weight approx. 1,8 t Tank with upper vaulted bottom tank divided into 2 chambers, upper chamber 54.000 ltr., lower chamber 27.000 ltr. Equipment per chamber: 1 manhole 310 x 440 1 discharge connection flanged DN 65 Godpfxjg T Tgxo Anrjbl 1 vent connection flanged DN 50 1 flanged connection DN 50 for agitator 1 connection piece 3/8" for test cock otherwise according to sketch

Condition: used, operating hours: 1,800 h, Used Bottling Line for champagne, sparkling and still wine 4000 bph Product Compatibility and Filling Technology This bottling line processes still wine, sparkling wine, and champagne with high efficiency. Specifically, it handles only glass bottles and uses an isobaric filling system, which ensures precise control when filling pressurized liquids, such as sparkling products. As a result, wineries that produce multiple wine types with different physical and chemical properties can rely on this line for consistent, adaptable operation. In other words, the system addresses diverse product demands without compromising output quality. Performance Output by Bottle Format Depending on the bottle format, the line delivers different outputs. It processes both 0.20l and 0,375l bottles at 4,500 bottles per hour. Meanwhile, it handles 0,75l bottles at 4,000 bottles per hour and 1.5l bottles at 2,000 bottles per hour. Therefore, this production speed suits medium-scale wineries that require flexibility while maintaining industrial performance. Commissioning, Runtime, and Immediate Availability Godpfx Anowgw Dgsrsbl Technicians installed the line in 2022. Since that time, it has operated for 1,800 hours and produced approximately 2,400,000 bottles. The system continues to run in production, which means it remains in good operational condition. Furthermore, its immediate availability offers an advantage to wineries needing rapid deployment. Because of this, buyers can integrate the equipment without significant downtime. Primary Bottling Block: Depalletizing, Rinsing, Filling, and Capping The process starts with a Duetti Packaging depalletizer, model M, which automatically feeds empty bottles into the system. Subsequently, the GAI monoblock, model 4033RES-HP-A01, performs rinsing, filling, and capping in a single integrated unit. The dual-stage rinser (water + gas) uses 16 grippers to sanitize bottles. A high-pressure electropneumatic filler with 24 valves carries out isobaric filling. Notably, the 3-head rotary corker applies straight corks, champagne-style mushroom corks, plastic closures, and aluminum screw caps. Moreover, the monoblock includes multi-format screws, motorized guide adjustments, dummy bottles for internal rinser sterilization, and a solenoid valve kit to switch between gas and cleaning liquid inputs. Altogether, this configuration provides high precision, minimal changeover time, and excellent bottle handling. CIP and Quality Control: Cleaning and Inspection Systems To maintain hygiene, the WIN&TECH CIP unit, model Win&Guard C 23.05, manages automatic cleaning via a steam-water heat exchanger and a three-stage filtration system across two independent circuits. Additionally, this system allows operators to sanitize the internal components between production runs without disassembly. At the same time, the CMP inspection unit, model CV-MUF108, performs continuous quality control.

Condition: used, Year of construction: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Scope of delivery  Spectrum TX conveyor control unit Measuring bridges for inlet control and rejection with height adjustment 2 x Delta K rejection units Air conditioning unit Various spare parts (pulleys, belts) Documentation and training documents (German) Transponder for test bottles Gbedpfx Asu Scr Sonrsl

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Gjdpfjvptt Rox Anrsbl

Condition: used, Fermentation cellar with tanks, equipped with 2 dished heads. - 2 tanks with 83 hl gross content each, with 2 x cooling zones - 4 tanks with 52 hl gross content each - 2 tanks with 79 hl gross capacity each. Additional title: Years of manufacture 1991 - 1993 Gbodpfx Anjxbn Rkerjl Features: 2 Tanks, each 79 hl; 4Tanks, each 52 hl; 2 Tanks, each 83 hl

Condition: used, Leistung: 500-800 Fl./Std. Luftverkehr: 8 m3 Gbedpox Itvzofx Anrel Luftdruck: 6 bar

Condition: excellent (used), Disc valve, flap valve, ball valve -Drive: manual -Connection: DN65 -Material: Stainless steel -Dimensions: 250/150/H200 mm Gbodpfeb A N Dlex Anrjl -Weight: 6 kg