Single-sheet envelope feeder

Schneider SF 60 Kuvert Anleger

Condition: ready for operation (used), Size: max 750 x 1.050 mm Hjdpod N D Nvjfx Ag Uong min 40 x 75 mm section height: max 165 mm Stroke height :1.300 mm lifting capacity: 200 kg Power requirements: 3,1 kW (220/380V, 50Hz) Width: 1.425 mm Depth: 2.970 mm Weight: 850 kg (approx.)

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles Hnjdpfx Aeh Eibaeg Uog the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: used, Year of construction: 1997, functionality: unexamined, Polar Mohr RA-4 Year of manufacture: 1997 After the jogging process is completed, the air is pressed out of the cutting ream. You can perform single or double pressing, with the pressing pressure for the first cycle being adjustable; on an inclined table, intermediate pressing is also possible. Table size: 900x1150 mm Minimum ream height: 30 mm Manual ream height: 80 mm Hnedpfx Aswth Rwsg Ujg Compressed air requirement at 6–8 bar: approx. 2 L/min

Condition: like new (used), Year of construction: 2007, operating hours: 106 h, functionality: fully functional, color channels: 5-colour with coater, paper width (min.): 585 mm, paper width (max.): 740 mm, varnish tower (chamber blade) Hnsdpfsx S Npfox Ag Ueg Prinect Axis Control Prinect Control Console with remote control for ink zone adjustment, ink duct roller speed, circumferential, lateral and diagonal register control, with Job Memory Card and touch screen ALCOLOR Vario dampening unit with circulation and cooling CombiStar battery tempering unit (water-cooled) AUTOPLATE XL simultaneous automatic plate change system (changes 5 plates in just 1 minute!!) PRESET automatic sheet format adjustment automatic ink roller washing device automatic blanket and impression cylinder washer Weko AP 232 powder sprayer IR dryer DryStar 2000 high and extended pile delivery standard accessories Best machine on the market – Top condition

Year of construction: 1999, condition: used, machine/vehicle number: 6572818, Jogger Hnsdog Stkljpfx Ag Usg Serial Number: 6572818 800 x 1340 mm

Year of construction: 2026, condition: new, Picture 1: Offered Set of two load moving skates with 6tonnes capacity each. You can move 12tonnes in total. The skate system is equipped with high quaity polyurethane wheels. Hnsdpfx Aogi Dl Neg Ueg other pictures: Load moving skates in different sizes from 60-220mm height and capacities between 5 and 220 tonnes. Available as 3-Point, 4-Point, Containerskates, 360° Rotational skates with Polyurethane wheels (for all floors) or Nylon wheels (for flat and smooth floors). Please send us an inquiry with information about the weight and project you have to move. We will then send you a detailed offer. Short delievery times, typicalles in stock. Pictures show a selection.

Condition: used, Year of construction: 2008, Automatische Bündelauslage / Fully Automatic Banding Delivery Palamides Delta 703 Baujahr / Year 2008 - Serial-No. 2244 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hnedpfx Agotqgncs Uog

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. Hjdpfewh Tq Sox Ag Usng For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: excellent (used), Offer consisting of: Polar 115 XT Plus, year of manufacture 2011, side air tables, touch colour display, Plus version, including spare knife and accessories. Hodpfx Agjx Srqlo Ueng

Condition: new, Year of construction: 2025, Horizontal cartoning machine for inserting products into folding boxboard. Suitable for a variety of products (solid products) such as tubes, bottles, ampoules, vials, blister packs, cosmetic jars, vacuum packed food. A brochure or leaflet can be inserted additionally to the product for e.g. instructions for use, instructions or similar. The fully automatic packaging process includes feeding of the products, erecting of the folding boxes, insertion of the products, insertion of the brochure or leaflet, closing of the box and out feeding of the box. Within the range quick change to different carton sizes simply by adjusting the parameters (no format or tray changes necessary). PLC control, touch screen operating monitor (menu available in different languages e.g. English, German etc.). - Specifications: Dimensions of the folding box: L(50-200)xW(20-85)xH(15-75)mm; requirement carton/paper thickness of the box (min-max): 250-450g/m max. cycle of the machine in neutral: 100 cycles/min; power supply: 380V, 3P; compressed air and compressed air consumption: 5-8bar, 0,16m³; dimensions of the machine LxWxH: 3500x1500x1600mm; weight: 1200kg. Hnedpfov Nkwgex Ag Uog Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.