Crane truck

Scania G 490 8x4 Euro 6 HMF 6020-K6 + JIB FJ 1200-K6

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Nsdpfx Aehzbipoamodd Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, mileage: 430,000 km, power: 353 kW (479.95 HP), overall weight: 32,000 kg, fuel type: diesel, brakes: retarder, gearing type: mechanical, emission class: euro5, loading space width: 2,500 mm, loading space length: 3,950 mm, loading space height: 1,250 mm, first registration: 05/2009, Equipment: crane, soot filter, Crane: ----- Retarder- Air conditioning- Full air suspension- Fifth-wheel coupling/plush- 4-fold outriggers- Fassi 660, 2008&nbsp,Suspension: Air suspension Ndedew Ubyyepfx Aamjd

Condition: new, Year of construction: 2025, XX100405 CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 370 Machine in stock Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR205249 One pairs of additional vices with independent positioning and vises modification: • Transformation of four standard vices to vices with independent positioning • Transformation of standard vices into extra clamping vices - PR205258 Pendular (2 working areas, 2 pieces) and oversides profiles machining: • Second X-FLOW • Right pneumatic fixed stop • Software to manage pendular machining • Safety devices for pendular machining • Tunnel for oversized profile machining • SW to manage oversized machining operations - PR205253 Device to measure profile length - PR205227 Device for integrity and measure of the tool Ndodpfjwhrlnox Aamsd - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715059 3D custom milling Module for FST CAM 4 - ZP715010 Module for rigid tapping and chase tapping - PR205268 Rear chip collection tanks for FMC 370 - PR205271 Centralised automatic lubrication system - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 (8 holders HSKF63, 8 collets and 8 HM milling cutters) - PR204497 Holder HSKF63 with cutter Ø 200 x 6mm - PR203785 Holder HSKF63 with blade Ø 200 mm

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) Nsdpou Su Husfx Aamsdd ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: excellent (used), Planer 9 heads Working width - 20 cm Working height - 22 cm 5 pulleys in the table Heads 1 bottom 7.5 kW 2 right 11 kW 3 left 11 kW 4 right 11 kW 5 up to 11 kW 6 down 11 kW 7 up to 11 kW 8 down 11 kW 9 universal 11 kW Ndodpfxjtrdwts Aamod PERFECT CONDITION!

Condition: used, mileage: 129,252 km, lifting height: 38,000 mm, Year of construction: 2015, Drivetrain Drive: Wheel Ndedow A Hcdopfx Aamod Weights Empty weight: 27.875 kg Functional Lifting capacity: 23.800 kg Identification Serial number: 122024 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 11.1x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), mileage: 236,848 km, power: 368 kW (500.34 HP), fuel type: diesel, color: blue, axle configuration: 8x4, fuel: diesel, brakes: engine braking, gearing type: automatic, emission class: euro6, Year of construction: 2017, operating hours: 794 h, Equipment: ABS, air conditioning, cruise control, navigation system, soot filter, spoiler, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Power brake booster - Roof spoiler - Electric windows - Electrically adjustable exterior mirrors - High beam - Low-noise operation - Speed limiter - Air suspension - Air horn - Fog lamps - Particulate filter - Reversing camera - Sun visor - Stability control - Toolbox - Xenon lighting - Power take-off (PTO) - Central locking - Tow jaw = Further Information = General Information Year of manufacture: Sept. 2017 Model year: 2017 Transmission Transmission: I SHIFT, automatic Axle configuration Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; steered Ndjdpfxouxp Sxe Aamed Functional Mast: Telescopic (8 sections) Mast length: 24.5 m Lifting capacity: 7,000 kg Crane: PALFINGER PK27001-EH G, Year: 2017, mounted behind the cab Body brand: PALFINGER PK 27001-EH G CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request VOLVO FM 500 8X4 TRIDEM + PALFINGER PK 27001EH-G CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X4 TRIDEM, LAST AXLE LIFTABLE AND STEERABLE AIR SUSPENSION WHEELBASE 390 CM AUTOMATIC TRANSMISSION WITH ENGINE BRAKE FM CAB WITH AIR CONDITIONING, NAVIGATION, XENON, CAMERA, LEATHER TRAILER COUPLING TOOLBOX OPEN REMOVABLE LOAD PLATFORM WITH DETACHABLE ALUMINUM SIDE WALLS LOAD PLATFORM LENGTH 730 CM, WIDTH 252 CM LASHING EYES RONGPOTTS PALFINGER PK 27001-EH G CRANE 8 X HYDRAULICALLY EXTENDABLE RADIO REMOTE CONTROL OIL COOLER FOR CRANE HYDRAULICS WORKING HEIGHT 24.5 METERS MAX LIFTING CAPACITY 7000 KG MAX LIFTING CAPACITY AT 2100 CM: 650 KG 2X OUTRIGGER THE CRANE HAS ONLY 794 OPERATING HOURS !!!!! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: excellent (used), mileage: 28,919 km, power: 338 kW (459.55 HP), fuel type: diesel, color: red, axle configuration: 10x4, fuel: diesel, wheelbase: 5,100 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, operating hours: 1,219 h, Equipment: ABS, air conditioning, cruise control, low noise, navigation system, parking heater, soot filter, spoiler, = Additional Options and Accessories = Njdpfeuu Dhljx Aamodd - Aluminum fuel tank - Brake booster - Roof spoiler - Electric windows - Electrically adjustable exterior mirrors - High beam - Speed limiter - Air suspension - Air horn - Fog lights - Particle filter - Radio/cassette player - Reversing camera - Sleeper cab - Sideskirts - Sun visor - Stability control - Auxiliary heating (parking heater) - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication - Central locking = Further Information = General Information Year of manufacture: Nov. 2015 Cab type: FM Drivetrain Fuel tank: 500 liters Transmission Gearbox: I-Shift, automatic Axle Configuration Front axle 1: steerable Front axle 2: steerable Rear axle 1: twin tires Rear axle 2: twin tires Rear axle 3: steerable Functionality Boom: telescopic Boom length: 42 m Lifting capacity: 70,000 kg Crane: ERKIN WORLD POWER ER 2070 4.1 CRANE, year 2015, mounted behind the cab Body manufacturer: ERKIN WORLD POWER ER 2070 T-4.1 CRANE CE certification: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Condition: good (used), Year of construction: 2002, operating hours: 5,900 h, functionality: fully functional, machine/vehicle number: 74343, working width: 1,350 mm, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, Bütfering Optimat SBC 313 wide belt sander, already dismantled and stored on site Wide belt sander Year of manufacture: 2002 Model: Optimat SBC 313/QCE/Classic - with 3 units (description available in the photo) - top sanding Working width: 1350 mm Abrasive belt width: 1370 mm Abrasive belt length: 2620 mm Cross belt width: 150 mm Cross belt length: 4700 mm Ndjdeqvl D Hopfx Aamod Further details can be found in the photos

Year of construction: 2009, condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available Nedpfxedq U S Io Aamsdd -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece