Screw compressor RENNER RS 18.5 - 15 bar

Renner RS-18,5

Condition: like new (used), Year of construction: 2018, operating hours: 45 h, machine/vehicle number: MA0003_SN807103, Demonstration Machine available immediately: RENNER RS-18,5 oil-injected screw compressor. Made in Germany The compressor is in very good condition with 45 operating hour. Pressure: 10 bar Rated power: 18,5 kW Ltedodulwnopfx Aa Esa Delivery quantity: 2620 liters / min Sound level: 71 dB (A) Compressed air output: 1 1/4 " Dimensions Length x Width x Height: 1287 x 799 x 1296 mm Weight: 532 kg Operating hour: 45 Bh Warranty: 6 months from date of purchase

Condition: used, sweeping width 800 tenb. container volume 114 l total power requirement 3,0 kW 2759 m²/h max. 5232 m²/h Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger Ljdpfx Aaog Ti Ihj Ejta including new battery pack (consisting of 6x gel battery) !!

Year of construction: 2018, operating hours: 39 h, condition: excellent (used), machine/vehicle number: MA0006_SN817026, Demonstration machine (prototype / zero series) available immediately (Plug and Play): RENNER RS-PRO18,5 - (10 bar) oil-injected screw compressor Control: -RENNERtronic Operating hours: 39 Bh Pressure: 10 bar Rated power: 18.5 kW IE 3 - engine Ljdpfxsd D Tiye Aa Ejta Delivery quantity: 2.45 m³ / min Sound level: 71 dB (A) Compressed air outlet: G 1 1/4 " Dimensions length x width x height: 1078 x 687 x 1131 mm Weight: 371 kg Operating hours: 39 Bh

Year of construction: 2021, condition: as good as new (ex-display), ALTERA C 12.9.7 portal measuring machine with NMC300 control, PH10M Plus rotary, Laser Scanner Ready and swivel head Measuring range: 1200x 900x 700mm (XYZ) Accuracy of length: at 18° to 22° MPE E 1.9+L/375 with TP20/SP25/TP200 Length accuracy: at 16° to 26° MPE E 2.2+L/260 with TP20/SP25/TP200 - Ceramic machine construction with granite table and base covering - Integrated Controller with monitor arm - incl. NMC300 control and SOLO hand box Lsdpfxjnk Tuzs Aa Esta - Temperature compensation - Probe calibration D19mm calibration ball - CMM accuracy according to ISO 10360 - Shipped in wooden boxes according to ISPM15 - 10 years original accuracy guarantee - - 12 months of warranty - PH10M PLUS head with SP25 Kit2 probe system for scanning and FCR changer with 6 parking bays + stylus set - PC Dell with Win10 24" monitor - Camio Online software for tactile application Button configuration: - 1x PH10M PLUS pan/tilt head (A-5863-1000) - 1x SP25M probe body (A-2237-1000) for stylus lengths: 50 mm to 105 mm - 1x SP25-2 scanning module (A-2237-1112) - 1x stylus holder SH25-2 (A-2237-1302) - 1x M3 button Ø2mm ruby ​​L21mm stainless steel EWL 9.6mm (A-5000-3552) - 1x M3 button Ø3mm ruby ​​L21mm stainless steel EWL 14.7mm (A-5000-3553) - 1x Button M3 Ø3mm Ruby L30mm Carbide EWL 24mm (A-5003-0057) - 1x Button M3 Ø4mm Ruby L40mm Carbide EWL 36mm (A-5003-0060) - 1x Button M3 Ø4mm Ruby L50mm Carbide EWL 46mm (A-5003-0061) - 1x M3/M2 adapter stainless steel (M-5000-4163) - 1x button key M2/M3 (M-5000-3540) - 1x changing system FCR25-L6 6-way stand-alone changer with 6 storage locations (A-2237-1406 ) - 1x swivel head controller PH10-3 PLUS (A-5863-0100) including 4 days of training and commissioning of the system according to ISO 10360-2/5 Delivery term: EXW Photos show example images with various configurations Surcharge on the SP25 system for laser scanning e.g. with Nikon Laser LC15 including software and point cloud analysis: (on request) Anti-vibration possible for an extra charge. Other button configurations are possible. Other machine sizes are available. Just ask us. The machine can also be equipped with other software, e.g.: -Innovmetric Polyworks -CMM Manager

Condition: like new (used), Rotary vane bacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 300 m3 / h at 50Hz. Final vacuum: 0,1 mbar abs. Any clarification, do not hesitate to contact us. Ltsdpfxsftzzgs Aa Esa

Condition: good (used), functionality: unexamined, overall weight: 80 kg, total width: 990 mm, total height: 870 mm, total length: 1,180 mm, stack height: 800 mm, tank capacity: 900 l, empty load weight: 80 kg, We hereby offer you, without obligation, around 200 used steel stacking boxes and storage containers made of galvanized steel sheet. Manufacturer: unknown Dimensions of the stacking box (overall): 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal box height: 700 mm Box volume: approx. 0.9 m³ Weight: approx. 80 kg/unit Ltsdsvtckmopfx Aa Eoa Note: The steel stacking boxes were used by the previous owner on construction sites as containers for sorted construction waste. Emptying into larger transfer containers was carried out using a forklift with a rotating fork. For this reason, the stackable containers are manufactured with extra thick-walled construction. Sale takes place without obligation, excluding warranty and guarantee, to commercial customers only. We would be pleased if the steel stacking containers are of interest to you. Your service team, Mertens & Frowein GmbH

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor Lodpfx Aasm Nb Ris Eota >control panel >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 510 mm, spindle motor power: 25 W, overall weight: 5,600 kg, CNC lathe, equipped with FANUC 18i TB control, turret 12 motorized positions, bar pitch 77 mm, 250 mm chuck Gantry and palletized parts magazine Lsdpfxsrh Eulj Aa Ejta

Condition: used, Year of construction: 2000, max. workpiece diameter 40 mm min. workpiece diameter 10 mm workpiece length 200 - 640 mm Control SPS Siemens S5 95 U total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 8,5 x 2,8 x 2,35 m Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools. Machine consisting of: - Basic machine model TR 60/4-650, passage 640 mm - Bar magazine for bar lengths 2 - 3.5 m - Normal version for solid material up to ? 40 mm - Central position of the bar feed rollers - Bar feed unit - Feed gripper in standard version - Cross switch with 4 clamping stations model TR 300.00 - 4 base jaws, width 80/140 mm, contact ? 75 mm - Swiveling cross switch in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic. Clamping - Saw blade guide - Processing unit no. 1 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive Ltodpfxjvp Sd Is Aa Eoa - Machining unit no. 3 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 - USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Unloading chute - Millimeter bars for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Pressure accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and container - Coolant pump CALPERA - Electrical equipment in separate electrical control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Flashing light to signal machine downtime - Central lubrication - Chip conveyor. In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for € 25.000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates the whole operating hours at around 24,000. Machine under power in sellers factory. Machine dealer with own stock of 1600 m².

Condition: used, Powder Coating Plant - Automatic Ltedpfxjv Npa Hj Aa Esa The plant moves with conveyor system. The material to be powder coated is hung on the line, the system automatically follows the steps below and powder coats the material after cleaning it. The best project suitable for the existing facility is made. Special design is made according to the customer's product and needs.