Vibratory finishing machine,Parts feeder

Rösler

Condition: good (used), Year of construction: 2012, Manufacturer: RÖSLER Type: R 220 EC Year of manufacture: 2012 Bowl volume 220 liter Out side diameter 1200 mm Width processing channel 300 mm Overal channel length 2800 mm Power 2 kW Rosler Switch Unit Specifications Metric US Standard There are no specifications (yet) for this machine. Dimensions (estimate) Length 1400 mm Width 1400 mm Height 1400 mm Weight 2000 kg Please note: The information on this page has been obtained to the best of our knowledge and belief from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and contractual terms. We recommend that you check all important details. Gedpfx Anjvt Tlzorjbl Share on

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine is equipped with a side mount tool changer with a capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details. Godpfxoywv Tns Anrsbl • Country of origin: USA • Certification: CE • Electrical: 440 V, 3 phase, 50/60 Hz • Full load current: 33 A • Maximum load current: 33 A • Short circuit capacity: 10,000 A • Software version: 100.19.000.1123 • Power on time: 1,056 h • Tool changes: 32,413 • Included machine equipment: coolant system, wash gun, LED work light, fully enclosed working area • Condition: very good condition, low operating hours, well maintained Additional equipment • Machine vise • Touch probe Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2011, Manufacturer: RÖSLER Type: MINI 120 Gbedovt Tl Ujpfx Anrjl Year of manufacture: 2011 Bowl volume 120 liter Out side diameter 910 mm Width processing channel 210 mm Overal channel length 1950 mm Power 0.75 kW Specifications Metric US Standard There are no specifications (yet) for this machine. Dimensions (estimate) There are no dimensions (yet) for this machine. Please note: The information on this page has been obtained to the best of our knowledge and belief from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and contractual terms. We recommend that you check all important details.

Condition: used, Year of construction: 2008, operating hours: 27,234 h, functionality: unexamined, overall weight: 1,200 kg, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 2,650 rpm, power: 11 kW (14.96 HP), input frequency: 50 Hz, input current: 45 A, year of last overhaul: 2019, We are offering this used Rösler Z 1200 ASS-2-turbo wastewater centrifuge for vibratory finishing, year of manufacture 2008. Operating hours: 27,234 h Application: vibratory finishing machines Includes: - 1x tipping slurry trolley (for forklift handling) - 1x double-compartment tank (650L dirty water / 650L clean water) equipped with diaphragm pumps and agitator - 1x aluminum drip tray for the tank - Various fittings and sensors - Electrical cables and pneumatic lines require reconnection or replacement - 1x PDF documentation in German - Software backup to be performed by the buyer - Warranty expired (last manufacturer maintenance in 2019) Gbjdpfx Ansy Rnfpsrol Machine type: Z 1200 ASS-2-turbo Year of manufacture: 2008 Serial number: 44478/08 Centrifuge weight: 1,200 kg Motor power: 11.0 kW Rated power: 20.00 kW Rated current: 45.0 A Maximum rotational speed: 2,650 rpm Maximum load: 65 kg Maximum flow rate: 1,000 l/h Supply voltage: 400 V Main power supply: 400 3 Ph/N/PE V Frequency: 50 Hz Fuse protection: 50 A Control voltage: 24 V DC Maximum ambient temperature: 40 °C Product temperature range: 50 °C Inner drum diameter: 500 mm If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 12 [mm] - Max. machining length : 135 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 12 [mm] - Z stroke : 120 [mm] - Spindle speeds : 7000 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 5 END ATTACHMENT - Number of positions : 3 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500 X 770 [mm] - Machine weight : 1400 [kg] EQUIPMENT - CNC : Fanuc - 3 colors status lamp Gjdpsuhaw Iofx Anrjbl - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Electric transformer

Condition: like new (used), Year of construction: 2000, functionality: fully functional, ROSLER machine, force centrifuge with classification screen, can be seen in good working condition, speed 174 rpm, capacity 60 litres Gsdpfx Aexg Dgfenrebl

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, Machine used for shot blasting of steel components; additionally, the machine is equipped with a wet dust collector, which enables blasting of aluminium parts (additional installation available at extra cost). -Year of manufacture: 2024 -Machine operating time: 2,000 hours -Mesh conveyor made of manganese, width 1,000 mm -Adjustable conveyor belt speed -4 turbines, 11 kW each, type Rutten Gamma 330 HD -Variable turbine speed regulation -Hot Spot chamber made of manganese and tool steel -Automatic parts detection -Automatic abrasive flow control -Automatic abrasive refill -Automatic parts blow-off -Dedusting system: Rosler BF 40/40 -The machine allows the use of GH-grade extremely hard, sharp-edged blasting media -Turbine blades made of carbide guarantee 30,000 working hours -Turbine housings made of carbide offer even greater protection against machine body wear Gbedpfxewvgbge Anrjl

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,327 h, travel distance X-axis: 762 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-2SS was manufactured in 2014. It features advanced capabilities including tool measuring and a probe for enhanced precision. With a feed cutting time of 5327 hours, this vertical machining centre is designed for efficient operations. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS machine we have for sale. Contact us for further details. Gjdpfx Aneyux Saorjbl • IKZ • Probe • Tool measuring • Axis configuration: 3 axes (X/Y/Z) • Frequency: 50 / 60 Hz • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Arc flash rating: • 208-240 VAC models: HRC-1 • 360-480 VAC models: HRC-2 • Feed cutting time: 5327 h

Condition: ready for operation (used), Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible. Gedpfx Aney E S Evjrobl

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, In addition to the machines mentioned and shown, we have many other machines and accessories (blasting systems, conveyors, and small machines) available from stock. The machines can be purchased or rented. Contact us for (free) advice on vibratory finishing, drum & blasting technology. Godpfx Aowfdbcenrjbl

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,446 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle motor power: 22,000 W, table load: 300 kg, number of slots in tool magazine: 41, number of axes: 5, This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details. • Spindle type: Inline direct drive • Tool holder: SK40 • Tool changer: SMTC • Rotary technology: 2 axes with support bearing • B-axis range: −35° to +110° • C-axis range: 360° • Clamping surface: Ø 630 × 500 mm • Coolant system: standard coolant, P-Cool, through-spindle coolant (TSC) • Renishaw probing: WIPS system with workpiece probe and tool measurement • Control functions: 8M functions, rotate and scale • Memory: 16 MB • HSM: High Speed Milling Godpsyid Hvefx Anrjbl • Rigid tapping: yes • Cycle time hours: 5,446 h • Power-on hours: 21,246 h Technical Specification Taper Size SK 40

Condition: like new (used), Circular dryer S 20, capacity 200 litres, can be inspected in good working condition. Gbedpjy Eqx Sjfx Anrsl

Condition: good (used), Grinding media, ceramic grinding media, polishing media for vibratory finishing machines, vibratory finishing machines, vibratory finishing machines, vibratory finishing machines, continuous vibrators -Manufacturer: Rösler, Ceramic grinding wheels type RS 40/40 2 bags Gbsdpoink Tijfx Anrol -Contents: 25 kg/bag -Price/Sale: complete -Transport dimensions: 400/380/H400 mm -Total weight: 50 kg

Condition: good (used), Year of construction: 1999, Machine is in good condition. Gbedpfxowx Rafs Anrsl X 750 mm Y 400 mm Z 500 mm 10.000 rpm

Condition: used, Year of construction: 1996, charge load 260 liter 1.300 mm tank diameter / tank height 1.150 / 500 mm 300 mm motor capacity 1,5 / 3,0 kW motor speeds: 985 / 1.480 U/min voltage 400 V weight of the machine ca. 740 kg dimensions of the machine ca. 1,50 x 1,30 x 1,25 m Gbodpfx Ajwa Uhpsnrjl Finishing machine - Serial-No.: 15770 / 96-08 - Machine ON: 37.851 h - Timer