Precision four-jaw lining

Röhm Durchmesser 260 mm

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm Lodpfx Amsn E N Ndjpeaa strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: excellent (used), Four-jaw chuck make Röhm diameter 315 mm Lsdpfx Amspk A A Hopeaa single adjustable jaws bolt circle 120 mm

Condition: good (used), BSTA 30 / 600 spm Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hole in the table 315 x 110 mm Ram surface dia. 250 mm Weight ca. 3.000 kg Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Laodpfx Aeda Ha Nsmpja Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: good (used), Year of construction: 2012, functionality: unexamined, turning diameter over cross slide: 340 mm, spindle bore: 93 mm, turning length: 2,000 mm, turning diameter: 570 mm, turning diameter over bed slide: 570 mm, quill stroke: 180 mm, total length: 3,800 mm, total width: 2,100 mm, total height: 1,900 mm, overall weight: 4,500 kg, SEIGER SLZ-570 E x 2000 – CNC cycle lathe Robust German precision lathe with 2,000 mm centre distance and Siemens 840D control. Equipped with ZF two-speed gearbox, powerful AC main drive (20/25 kW) and large spindle bore of 93 mm including accessories. Sandvik Coromant Lsdpfxoyhnvbs Ampsaa Included in the scope of delivery are various tool holders and accessories, including: Sandvik Coromant tool holder / adapter Various holders for Multifix system Steadies / rests Additional accessories as per images

Year of construction: 2026, condition: new, Sandblasting cabin for clean blasting work without soiling the working environment. Suitable for various blasting materials, e.g. quartz, glass ball, plastic ball, etc. Ideal for cleaning, derusting or paint removal from metal parts of all kinds, e.g. engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are firmly attached to the housing Viewing window with glued-on protective film enables optimum visibility and work protection during workpiece processing Dust-free working due to all-round seals on lid and door frame Sturdy storage grid allows workpieces to be placed inside the cabin With drain opening for changing the blasting material Suction pipe for the blasting material fixed at the bottom of the collecting container With compressed air connection on the outside 2 large side doors for loading and unloading from both sides, also for longer workpieces Integrated exhaust system with replaceable air filter Control of the air flow via foot pedal Ljdpecqm Rrofx Ampjaa 2 blasting guns: one fixed and one freely movable blasting gun 3 separate switches for on/off, suction and cabin lighting 2 fluorescent tubes (230 Volt), in separate housing with protective screen and replaceable protective foil, including 5 spare foils regulation of the working pressure via pressure regulator with manometer Scope of delivery: High-quality blasting gun with ceramic nozzle 4 pieces ceramic nozzles (4 / 5 / 6 / 7 mm) Incl. 5 pieces of replacement foils for S

Year of construction: 2015, condition: excellent (used), Three-jaw chuckMake Röhm Diameter 200 mmmwith individually adjustable jawsShort taper size 6Taper diameter 106.390Hole diameter 133.4Weight 24.5 kgBJ estimated Lodpfxed Th I Te Ampsaa

Condition: good (used), Drill bit, twist drill bit, drill bit, for drilling rig, drilling center -Quantity: 53x NC twist drills with tightening thread -Diameter: 8x Ø32mm 9x Ø34mm 8x Ø36mm 6x Ø38mm 1x Ø39mm 8x Ø40mm 7x Ø41mm 6x Ø42mm -Intake: MK4 Laedpfx Amjc Innkopja -Type: HSS -according to pictures - Sale: only complete -Weight: 84kg

Condition: excellent (used), Year of construction: 2018, CNC Lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Internal machine no.: 19 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Spindle speed: 45 – 5,000 rpm Lodpfxsylhmus Ampsaa Tool turret: 12 stations (driven) Tool holder: BMT 65 Spindle bore: Ø 72 mm Equipment: Chip conveyor Parts catcher Touch setter Programmable sub-spindle One Touch IGF 3-jaw power chuck Kitagawa Various driven and static tools

Condition: used, Vertical band saw JAESPA type MSU 4 make no. 724749 year of construction approx. 1980 roll diameter 420 mm throat 400 mm table size 610 x 610 mm cutting height 260 mm saw band length min. 3200 - max. 3400 mm saw band speed 10-1500 m/min. infinitely variable mains connection 400 Volt, 50 Hz Laodpfx Ajd Nbk Tsmpsa - infinitely variable saw band speed via 2 gear steps and infinitely variable via belt drive - saw table tiltable - Saw blade butt welding machine IDEAL BS0-16 - saw blade shear - Grinding stone for grinding the weld seam space requirement L x W x H 1000 x 850 x 1850 mm weight 400 kg good condition

Condition: excellent (used), Year of construction: 2019, CNC Lathe Okuma LB 3000 EX II-MYW 800 Control: OSP-300LA Year of manufacture: 2019 Internal machine no.: 20 Distance between centers or spindle noses: 1085 mm Swing diameter over cross slide / bed: 340 / 580 mm Laedpfxeyk Tbhe Ampsa X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm C-axis travel: 360 mm W-axis travel: 895 mm Main spindle speed: 45 - 5,000 rpm Sub spindle speed: 45 - 6,000 rpm Mounting: BMT 60 Tool turret: V12 (driven) Equipment: Chip conveyor One touch IGF Touch setter Main spindle Hainbuch Ø 65 mm Sub spindle SMW Autoblok KNCS-N 170-43 Coolant system HMF-980 with paper band filter Bar feeder / robotics interface prepared