Truck mounted crane

Palfinger PK 23002 C, Funk

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 150 mm, turning diameter: 1,040 mm, turning diameter over top slide: 690 mm, center height: 500 mm, center width: 2,000 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, bar passage: 55 mm, Center height: 500 mm Distance between centers: 2.000 mm Maximum turning diameter: Over cross slide: 690 mm Over bed: 1.040 mm Over gap: 1.070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of the faceplate: 320 mm CARRIAGE Length of bed guideways: 1.020 mm Cross slide travel: 640 mm Compound slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size (NN): 200 / 310 / 82 mm Rear bearing size (NNU): 190 / 260 / 69 mm Internal Morse taper reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 ÷ 800 rpm THREADING Total number of threads: 398 Metric threads: 0.5 ÷ 224 mm Module threads: mod. 0.25 ÷ 11 Whitworth threads: 56 ÷ 1/8 TPI Diametral pitch threads: 112 ÷ 1/4 DP FEEDS Number of feeds: 108 Longitudinal, cross and compound feeds: 0.05 ÷ 22.4 mm/rev RAPID TRAVERSES Gsdpfeyhhuwox Amuoit Longitudinal, cross and compound: 2.500 mm/min Longitudinal return: 5.000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 ÷ 500 mm Carriage steady rest capacity: 40 ÷ 350 mm PERMISSIBLE LOAD Cantilever load: approx. 1.500 kg Between centers, without steady rest: approx. 5.000 kg Between centers, with steady rest: approx. 6.000 kg Machine weight: approx. 7.800 kg

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Godpfx Amswi Tidjuoit Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: excellent (used), GSP M 743 mortising machine Stroke (mm): X450 Y500 Slide travel (mm): 300 Max. table tool distance (mm): 450 Gooseneck (mm) : 590 Slot width 25 30 mn Table diameter (mm): 700 Feed speed (mm/mm): 0.1-2.5mm/Cp Main motor power (HP): 6 Machine equipped with : Automatic feeds/Slide tilting Giodpfx Amjulfuzsust Dimensions WxDxH (mm) : 2300x1700x2600 Machine weight (T) : 3.5 Overall dimensions 2500x 2200 height 2400

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA Gedpfjxp Rzbjx Amujit With chuck, Multifix toolholder and digital readout.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. Gedpfsxghngsx Amusit The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate) double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent pipe 2" with vent cap. Tank is equipped with the above fittings at the factory and is cleaned on the inside. Capacity: 80.000 liters diameter: 2.900 mm length: approx. 12.780 mm Gijdpshvidgjfx Amuot Weight: approx. 15.750 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 100,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 76694 Forst Tel: 07251 / 915119 Fax: 07251 / 915175

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Gsdpskwcdbsfx Amusit Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, operating hours: 14,754 h, Equipment: all wheel drive, Atlas Terex 1905 Gedpfstplq Iex Amuoit Year of construction: 2006 Engine power: 114 KW hammer piping, air conditioning, quick coupler

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 200,210,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Gjdpow R Enmsfx Amujit Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.

Year of construction: 1971, condition: excellent (used), CNC Dresser KW with Siemens 840D new in 2002 HeidenHain measuring scales Siemens Servo engines Crankshaft and External grinding Large steady rest package Large stone and flanch package Centre height: 316mm Grinding Ø: 632mm Grinding length: 3000mm Grinding stone dimensions:800 x 305 x 105mm Grinding stone speeds: 1000Rpm Table inclasement: 9,1° Coolant system: Yes Filtration: Yes CNC Dresser KW with Siemens 840D new in 2002 HeidenHain measuring scales Siemens Servo engines Gisdpfxom Twz Aj Amuot Crankshaft and External grinding Large steady rest package Large stone and flanch package Length: 10100mm Width: 2600mm Height: 2300mm Weight: 15000kg