Knife Grinding Machine

MVM

Condition: used, Technical specifications: Dujdpjzhukqsfx Akksw Max. length of sharpened blades: 600 mm Diameter of grinding wheel: 125 mm Automatic feed Power supply: 380 V Total power: 0.75 kW Overall dimensions: Length: 1000 mm Width: 460 mm Height: 500 mm

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are selling this lathe. It is connected and can be tested under power. The machine comes with accessories. Turning diameter: 2,000 mm. Turning length: 10,000 mm. Maximum workpiece weight: 60,000 kg. Machining diameter: 2,000 mm. A video of the machine can be sent via WhatsApp. Dodpfoxwmbmex Akkjuw

Condition: excellent (used), Knife grinder MVM model FX350 with tilting magnet mm 4.000x200, 15 HP grinding wheel motor, grinding wheel diameter 250 mm Duodpfx Aozfab Njkkjw

Condition: like new (used), functionality: fully functional, 1 new, high-performance knife grinding machine MVM KX 250 – 2100 mm (exhibition machine) * 1 year warranty • Siemens Touch Screen PLC 7" • Grinding wheel motor 11 kW, 15 hp, 400V-3-phase-50 Hz • Grinding wheel diameter 250 mm • Magnetic rotary table 0 to 90 degrees • Width of magnet: 150 mm • Length of magnet: 2100 mm Duedpfx Asx Nhnhekkew • Vernier dividing head for magnetic rotation +/- 90° • Quick-change clamping device for the grinding wheel (bayonet quick coupling) • Automatic feed controlled by Siemens PLC (0.001-0.1 mm) • Variable slide speed 1 – 30 m/min. • Automatic lubrication of the PTFE slide shoes • Coolant injection in the center of the grinding wheel, plus 2 nozzles on each side • External coolant tank with pump • Magnetic separator with discs for cleaning the coolant, with manual paper tape filter • Motorized quick-change flange enables fast tool changes • Variable grinding wheel speed • Bellows with magnetic attachment to the slide, covering the entire slide travel • Reversal of grinding wheel direction of rotation • LED lighting • Dimensions 4.12 x 1.50 x 1.75 m • 1 year warranty

Condition: good (used), Year of construction: 1975, Forming rolls R30/40/50/60/70/80/90/100 Dedpfxexcnabj Akkouw Under power good running order Documentation drawings availebel Max. workpiece: 3000Ø Maximum sheet thickness:12mm Max. dishing radius: R-300mm Min. product Ø: 300 Min. plate thickness: 2mm Min. dishing radius: 20mm Working speed: 0 - 5000mm/min. Power: 30kW Length: 5000mm Width: 1600mm Height: 2800mm Weight: 6000kg

Condition: excellent (used), Knife grinder MVM model AF1000 with tilting magnet mm 1000 long Djdpfx Akjzcl Nzeksuw

Condition: excellent (used), Knife grinder MVM model AF1500 with tilting magnet mm 1500 long Duedpfx Akoy Tpf Nskjw

Condition: excellent (used), Carbide saw grinder Vollmer model Akemat B4 year 2001 Duedpfxeui S Eue Akkjw

Condition: used, functionality: fully functional, KNIFE SHARPENING MACHINE Dujdpfxjy Uk Sys Akkjw

Condition: used, Year of construction: 2010, functionality: fully functional, total length: 4,130 mm, working width: 150 mm, table length: 4,130 mm, table width: 150 mm, We offer this used MVM KX41 automatic sharpening machine with automatic loader, year of construction 2010. Machine is in working condition, but not useful to our production anymore. Table dimensions: 4130x150mm, tiltable (automatic). Automatic loader/unloader. Machine is complete as visible on the pictures Manufacturer: MVM Model: KX41 Year of construction: 2010 Djdpfx Akey Nl Edekeuw Condition: used Category ID: 151 Type ID: 1363 Machine type: Automatic sharpening machine with loader If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Duodpfx Ajfu Ivzokksw Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: used, heavy-duty copy lathe, used, in good condition, with extensive accessories, including disc grinding attachment. Manufacturer MVM, model T1500. Centre distance approx. 1450 mm, centre height approx. 220 mm. Manual copying device. 8 speeds 700 – 3100 rpm, stepless. Motor 2.5 kW. Space required approx. 2700 x 800 x 1500 mm. Weight approx. 500 kg. Location: 97447 Gerolzhofen, loaded free, unpacked. Delivery in as-inspected condition, without guarantee or warranty. Dujdpjy Ay A Rjfx Akksw

Condition: excellent (used), Knife grinder MVM model K250 with tilting magnet mm 2100 long, grinding wheel motor 13,5 kW Dodpeyg Ny Eefx Akkouw

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Duodpfx Akst Hwucokow Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!