Used Woodworking Bandsaws for sale (12,157)

Condition: new, Year of construction: 2026, The CORMAK HBS421 wood band saw is designed in a vertical configuration, allowing convenient material guidance across the table and enabling both straight and curved cuts. In production environments, rigidity is crucial—therefore, the body and main structural components ensure stable wheel alignment and, consequently, smooth and accurate blade tracking. Drive Wheels and Blade Guidance In professional band saws, cutting quality largely depends on the geometry of the blade guidance system. Properly selected drive wheels ensure correct blade operation along its entire length, reduce slippage, and limit localized overloads. In practice, this results in: Reduced vibration at higher feed rates Improved edge quality—especially in harder wood species Extended blade life thanks to stable operation and correct tension Worktable and Angle Adjustment The worktable provides material support and cutting repeatability. In the CORMAK HBS421 wood band saw, both stability and adjustment capability are essential, allowing for angled cuts. This solution is particularly valued in carpentry workshops where quick transitions between different operations (sizing, structural component preparation, trimming) are required. Drive System and Continuous Operation The band saw drive system is designed for load-intensive operation, while the three-phase power supply enhances smooth running and torque stability. As a result, this vertical wood band saw maintains cutting performance even when processing thicker materials—an important factor in serial production. Adjustable blade speeds allow optimization for specific tasks, reducing edge burning and improving cutting control. Dust Extraction and Workstation Ergonomics Cutting wood generates significant amounts of dust and chips. The integrated dust extraction port enables connection to an extraction system, which significantly improves: Work safety (reduced airborne dust) Visibility of the cutting line Service life of working components by limiting dust accumulation Precision and Productivity In industrial practice, it is not only the ability to cut material that matters, but also maintaining repeatability. The rigid construction, stable blade guidance, and controlled blade tension ensure straight cuts and reduce the need for corrections in subsequent processes (planing, sanding, fitting). As a result, the CORMAK vertical wood band saw supports shorter production cycles and minimizes material waste. Standard Equipment High-voltage release switch Dust extraction port 2 × 100 mm Precision rip fence Cutting blade 3345 × 20 mm, 8 TPI Optional Equipment 100 mm extraction hose Galvanized clamp Mobile base (up to 260 kg capacity) Technical Specifications Wheel diameter [mm]: 480 Maximum cutting height [mm]: 240 Maximum cutting width [mm]: 405 Blade width [mm]: 9.5 – 38.1 Blade length [mm]: 3345 Blade speed [m/s]: 7 / 14 Table tilt range [°]: 0 to +45 Table dimensions [mm]: 535 × 435 Overall dimensions [mm]: 830 × 550 × 2070 Weight [kg]: 160 Motor power: S1 – 2.2 kW / S6 – 3.1 kW Power supply: 3-phase, 400 V Lrsdpfx Aleyk Apns Ijn Manual (DTR): Yes CE Declaration: Yes

Condition: new, Year of construction: 2026, The CORMAK HBS321 vertical wood band saw operates in a vertical configuration, providing the operator with full control over guiding the material across the worktable. A key component is its rigid frame, which maintains the geometry of the wheel and guide system. This ensures smooth blade tracking and consistent cutting accuracy. In practice, this means a lower risk of blade drift—particularly important when cutting harder wood species or working at greater cutting heights. 350 mm Wheels and Blade Tracking Control Cast Iron Worktable and Angle Adjustments The band saw features a 545 × 400 mm worktable, providing adequate support for workpieces—essential for precise straight and angled cuts. The table tilt range of 0–45° allows for bevel cuts without the need for additional attachments. The cast iron construction effectively dampens vibrations, helping maintain stable operating parameters. Drive System and Operating Parameters This woodworking band saw is equipped with a motor rated at 1.1 kW (total power), ensuring stable performance for typical carpentry tasks such as ripping, trimming, preparing components for gluing and assembly, and contour cutting. The use of blades with widths ranging from 6–15 mm allows the operator to select the appropriate blade depending on the task—from precise curved cuts to stable straight-line cutting. Laser – Enhanced Control and Reduced Material Waste The integrated laser guide supports quick material alignment and accurate cut tracking. In practice, this reduces the need for test cuts, minimizes material waste, and makes working with detailed elements (e.g., profiled components or shaped cutouts) easier and more efficient. Lrsdpeyk Aliofx Al Ion Precision and Work Efficiency In professional applications, repeatability is just as important as cutting capability. The rigid construction, stable table, and quick blade adjustment system reduce machine setup time and limit the need for corrections during subsequent processing stages (planing, sanding, fitting). As a result, the CORMAK HBS321 band saw supports smooth workflow and improves overall process efficiency. Applications The HBS321 wood band saw is designed for a wide range of woodworking and wood-based material applications, including: Cutting boards, squared timber, beams, and glued elements Trimming furniture and carpentry components Angle cutting (using the tilting table) Cutting shapes and profiled elements Workshop use in carpentry shops, craft businesses, and training facilities Technical Specifications Wheel diameter [mm]: 350 Maximum cutting height [mm]: 175 Maximum cutting width [mm]: 300 Worktable dimensions (L × W) [mm]: 500 × 400 Table tilt [°]: 0 to +45 Blade width [mm]: 6 to 15 Blade length [mm]: 2240 Blade speed [m/s]: 6 / 12 Overall dimensions (L × W × H) [mm]: 750 × 650 × 1730 Gross weight [kg]: 88 Motor power [kW]: S1 – 0.75 kW / S6 – 1.1 kW Power supply [V]: 230 Manual (DTR): Yes CE Declaration: Yes Standard Equipment On/off switch with low-voltage release Quick blade tension/release lever Precision rip fence Cutting blade 2560 × 10 TPI 6.3

Condition: new, Year of construction: 2025, The multifunctional woodworking machine is the ideal combination of planer, circular saw, router and thicknesser, providing a wide range of possibilities. The use of 3 motors embedded in a strong, robust and compact design ensures comfortable and trouble-free operation. The circular saw with tilting spindle makes it possible to cut high density boards, MDF, ABS panels, PVC solid wood and other wood-based materials. THICKNESS PLANER. Three knives rotating at 4,000 rpm produce very smooth surfaces, while an adjustable bar allows for planing at an angle. The work tables can be removed when using the thicknesser. MILLING MACHINE. The extendable 30 mm spindle rotates at 6500 rpm in the upper part of the guard with a workpiece holding mechanism. Standard equipment: 30 mm spindle disc 254x30 blade swivelling from 90° to 45° movable table extension Ledowymxaopfx Al Isrn side and top workpiece clamping Precise adjustment of the milling stop radius milling attachment angle stop Technical data: Circular saw TABLE DIMENSIONS 940 x 410 mm MAX. saw blade dimensions 254 x 30 mm S1/S6 continuous rated power 1,5/2,1 kW Planer / thicknesser planing width 250 mm THICKNESSER MAX. 250 x 160 mm MOTOR POWER S1/S6 2,2/3,1 kW Milling machine Spindle diameter 30 mm MAX. MILLER DIAMeter 150 mm RPM 6500 rpm CURRENT OPERATING POWER S1/S6 1,5/2,1 kW General data SUPPLY 230 V DIMENSIONS 1100x1250x850 mm WEIGHT 320 kg

Condition: used, 1. CASOLIN Mega 230/4 Jointer 2. Ceccato P 270 11 X Compressor 3. SICAR Meta 1 / Meta 2 Calibrator 4. WEINIG Quattromat 23/23P Jointer – manual + catalog 5. ORMA NPC 6/95 Press 6. SCM CL 95-110 Calibrator 7. SCM CL110K RT – CL110K RR – 2 units 8. COSTA CK 950350 Calibrator 9. GIARDINA G02/05 Coating Machine 10. ITALPRESSE SCF/4-B Press 11. MAGIC Forma 180 Jointer – 2 units 12. CENTAURO SP400/600/700 Band Saw 13. MAGIC Recta 180-220 Jointer 14. WEINIG Unimat 14K Jointer 15. SOCOMEC LN210/LN260/LN300 Belt Sander 16. SICAR V4 Jointer 17. ITALPRESSE UT/6-P Press 18. ITALPRESSE SCF/6-J Press 19. SAC RS53s/RS63s Thicknesser + catalogs 20. SCM P64 B Jointer 21. SCM Sintex Jointer – 3 units 22. TSG2T Tenoner 23. SAMCO Unilev 150 Belt Sander 24. SORMEC 2000 series T90 Press 25. OMGA T50-350 Miter Saw – 2 units 26. TIGER 3-piston Clamping Device 27. PEGIC F315/R300 Miter Saw 28. SCM Sandya5 Calibrator – instruction + catalog 29. SCM UNO CCS Calibrator – instruction + catalog – 2 units 30. SBF Stefani 50/54/56/58 Calibrator 31. OMS ok 330/ ok super 350 Double Miter Saw 32. POR Standard Briquetting Machine 33. CB 2N RR1T 1100 Calibrator 34. SICAR MS30 Multi-blade Saw Lrjdekvnhwepfx Al Ijn 35. MOTTEI SR120/140 Compressor 36. ABAC Genesis 15 Compressor 37. UNIVER 400IP Miter Saw (Pertici s.p.a.) 38. OMGA TR2A Double Miter Saw 39. COMAFER Dinamic mod. 110N Briquetting Machine 40. FUTURA Modul 4 Jointer 41. Futura Modul 180 – 220 Jointer 42. GRIGGIO G18/G22 Quadro Jointer 43. TIGER TR/6-F Press 44. ORMA Omnia 30/13 Press 45. SCM Sandya10 RR 1100 Calibrator – manual + electrical diagram 46. BALMA Compressor 47. COMEC LN-LS Belt Sander (for chairs) 48. GENESIS-OASIS 5.5-11 kW Compressor – (English scan) 49. CB 2N R+RT 1100 Calibrator 50. Sandya 3 Calibrator 51. POR Junior Briquetting Machine (scan) 52. VIET Challenge 211 Calibrator – instruction (scan) 53. VIET Target 211 Calibrator (scan) 54. MAPELLI GM 36 Plus Dust Extractor (scan) 55. CASOLIN Astra Squaring Machine 56. MAGIC Forma 220 Jointer – spare parts catalog, electrical diagram 57. FELDER A741 Thicknesser – operating manual 58. ITALPRESSE Program 30 Clamping Device (scan) 59. ITALPRESSE Falcon/S; Nuovo Program Clamping Device (scan) 60. PAOLONI PF2740 – PF2950/PF400 - PF500 Thicknesser 61. CASADEI Syncro Planer 62. CURSAL TRVE550 Optimizer (scan) 63. SORBINI T/20-MR Brush Sander 64. MiniMax FS41 Thicknesser/Planer 65. SCM Sintex NTE Planer (scan) 66. OMB21; OMB1 ES1; OMB1 ES2; OMB1 ES2B Edge Bander 67. FUTURA Krono 180/220/240 Jointer 68. MEC V.4; V.8 Variable Frequency Drive 69. SAC S53/S63 Thicknesser - + catalog and electrical diagram 70. FUTURA Junior 180-220 Planer – manual and electrical diagram 71. SORBINI VS/34-AC Brush Sander 72. VIETMAC PL/84 Calibrator – Kombi 73. Atlas Copco GX 2-7 EP; G 7-15 Compressor (with electronic control) 74. OMS/STAYER T10, T14 Miter Saw 75. VIET Target 211 Calibrator 76. ARIATECH model ATE Dust Extractor (3 bags) 77. SCM TOP 21/29/35 Drilling Machine (scan) 78. SARMAX Semi-automatic System 79. SICAR MV300 Multi-blade Saw 80. STB TS350A Iron Cutting Saw (manual, spare parts catalog and electrical diagrams)

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller Lodpfxsw H Rq Hj Al Iern - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS: - Min. workpiece length: 400 mm - Max. length: 6000 mm - Max. workpiece width: 200 mm - Max. workpiece thickness: 200 mm - Roller motor power: 0.75 kW - Chain motor power: 1.1 kW - Feed rate adjustable via geared motor - Roller speed: 19 - 118 m/min - Belt speed: 10 - 60 m/min - 8 guiding belts - 17 steel feed rollers Lredpfexfgpgex Al Isn - Roller diameter: 80 mm - Roller height from base: 900 mm - Pneumatic pressing - Dimensions (L/W/H): 565 / 175 / 120 cm - Weight: ~ 1500 kg

Condition: excellent (used), Bandsaw with feed MEBER SR - after the technical review - in good condition - Italian production TECHNICAL PARAMETERS: 4 kW main engine wheel diameter 800 mm cutting height 420 mm Ljdpfx Alofwl Uas Isrn maximum width of the cut material 780 mm cutting width at the ruler of 575 mm cutting width with rolls 195 mm maximum width of the material cut with a feed 355 mm cutting band width max 40 mm feed speed adjustable on the inverter feed speed range 0-12.5 m / min height of the feed roller 140 mm pneumatic feed pressure upper and lower belt guides 0.75 kW feed motor stub diameter 100 mm dimensions (length / width / height) 260 x 165 x 115 cm weight 700 kg

Condition: ready for operation (used), Log band-saw with two band saw units at same machine. The unit is delivered complete with electrical and hydraulic parts. Plus PLC for setting of measurement. Max log diameters 700 mm Lodpfjypakasx Al Ijrn Sawing length 6.1 meter

Condition: new, Year of construction: 2025, for saw blades Width: 38 to 170 mm Lrsdjxz E Uaepfx Al Isn Length: 4,000 - 8,000 mm Also suitable for detecting bent teeth.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Bandsaw MACC SPECIAL 411 CSO, year 2019 Condition: very good - Sawing machine with cutting band falling controlled by hydraulic - Vice closure operated manually - Manual head return - Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw - Blade tensioning obtained per manual rotation of the handwheel and guaranteed by microswitch - Vice with device for quick approach - Accident-preventing devices on flywheel casing, on control handle, on blade, and external guard - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right - Adjustable end stop for cuts of the same size Lrjdpfxjpmaubj Al Ien - 24 V low voltage control - 0,06 kW power-driver pump for band cooling - Pedestal with chip collection tray and removable tank for coolant - Inlet conveyour

Condition: refurbished (used), BANDSAW HEADRING Mod. 1300/SG-CFC - Cast iron structure with stabilizing treatment. -right hand design (cutt from right to left!) - Flywheel diameter 1300 mm. - Flywheel width 165 mm for maximum blade width of 180 mm. -Filled flywheels with special ribs to enhance mechanical characteristics, subjected to stabilizing treatment; shaped with double curve for the best stability on the table; perpendicular to the rotation of axis. - 55kW (75 HP) main engine, automatic star-delta starter, pulley, belts and brakes -chains for timber unload HYDRAULIC CARRIAGE CFC - 4 clamps for log centering - Maximum distance from blade to clamp 1000 mm. -Max opening of hooks 900 mm - COMPUTERIZED-Mudata control system - Continuously variable speed feed from 0 - 140 ml/min and exploits the power of the main motor to obtain a quality cut, hydrostatic design -4 turning logs chain systems - Control unit and seat, multi-function joystick and electric servo control !!!!! OPTIONAL !!!!! INSTALLATION..... 40,000 EUR EXCLUDING VAT, FOR A 1-YEAR WARRANTY Mechanization and unloading rollers Log ramp, length 4 m - 20,000 EUR + VAT Log loading arms on the log saw trolley, hydraulically operated with a single cylinder - 20,000 EUR + VAT Roller conveyor - EUR 20,000 + VAT - Length 7.60 m - Width 1.1 m Ledpfsxzth Isx Al Iern - Rollers Ø 215 mm - Gear motor Second unloading roller conveyor - EUR 20,000 + VAT - Length 7.2 m - Width 1080 mm - Rollers 840 mm - Left/right chains - Own motorization These options significantly increase production flow, reduce downtime, and automate the log exit area. Advantages for industrial production - Complete line, fully reconditioned in 2025 - Excellent cutting stability thanks to cast iron construction - Extremely precise positioning with BRUSHLESS servo motors - High productivity and minimal maintenance - Ideal solution for factories wishing to modernize their cutting flow without investing in new equipment

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 8680 € 167.52 € Schwenkrahmen 3120x27x0,9 mm Ljdpfx Ajwirpvjl Ijrn 35/70 m/min 280 mm 240 mm 370x140 mm rund 225 mm, quadrat 215 rund 140 mm, quadrat 140 830 mm 1550 mm 1400 mm 1900 mm 353 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, WORKING DIMENSIONS 450x260 mm SURFACE PLANER kW 11 THICKNESS PLANER kW 15 SPINDLE MOULDER RIGHT kW 9.2 SPINDLE MOULDER LEFT kW 11 Lrjdsw E Ev Iepfx Al Ijn FEED kW 5.5 TERSA CUTTERBLOCKS SOUNDPROOF CABIN CE

Year of construction: 2015, condition: good (used), Jocar Log Carriages, strong band line set consisting of: entrance transfer, half moons,Log Carriages whith Three fixed Headblocks model 30P900/SM/NR, mounted on a mechanical structure, desk with Mudata positioning system, all inside a closed cabin, exit roller train , Jocar band saw device model 1250/165/NR, with a diameter of 1250mm flywheels, bicut, the input transfer is 4 chains 12000mm long, the carriage is 3 towers ideal for wood cuts 1000mm minimum, since the distance It is from the first to the second 750mm and from the second to the third 1350mm, max length 3 meters, all Jocar machinery from the year 2015 Ljdpslzgncefx Al Iorn

Condition: used, Year of construction: 2022, machine/vehicle number: 15084, functionality: fully functional, cutting width (max.): 420 mm, empty load weight: 3,100 kg, cutting length (max.): 200 mm, saw blade length: 5,500 mm, motor model: IE3, Equipment: documentation/manual, SECOND-HAND TS 400 THIN CUTTING HORIZONTAL BANDSAW CE RULES TECHNICAL DATA: SPECIAL DEVICE "OFFSET": DEVICE "DOUBLE SPEED": - Max. cutting capacity 420x200 mm - Distance from blade to conveyor 2-150mm - Min. cutting thickness from the top 0.75 mm - Saw wheel diam. 800 mm. - Saw wheel thickness 50 mm - Sawblade length 5500 mm. - Sawblade width 50 mm. - Sawblade speed 17-34 m/s - Conveyor belt size 400x4200mm - Oil mist cooling system - High accuracy hydraulic blade tension system (2500 kg) - Variable feed speed 0-25 m/min - Feed motor 2HP with inverter - Main motor 30 HP with inverter - Blade lift motor 2 HP - Dust hood outlet diam. 125 mm x 2 - Machine net weight Kg. 3100 - Air loaded pressure roller - Slow cutting start function - Spraying jets for blade lubrication Lodsyam U Topfx Al Iorn - Motor IE3 INCLUDED - S/N 15084 - Year 2022

Condition: used, functionality: fully functional, Band Saw Blade Sharpener PERFECTA Specification: • condition - used, after maintenance • manufacturer - PERFECTA • 0.75 kW motors (3-phase) • grinding angle adjustment range 0-10 degrees • original paintwork • body dimensions - 50 x 50 x 130 cm (width x length x height) Additional information: • the machine is in good technical condition, ready for immediate use • the displayed photos show the actual condition of the sale item • possibility to turn on and test the device on site • the auction price does not include VAT or transport costs Financing and transport: Lrodpfeyy Sdbsx Al Isn • we organize transport via MDD fleet, courier companies, or external carriers • we offer financial support in the form of leasing or lease loan

Condition: used, functionality: fully functional, Band Saw Blade Sharpener OSAMA Specification: • Condition – used, after inspection • Manufacturer – OSAMA • Motors with 0.75 kW power (3 phase) • Grinding angle adjustment from 0 to 15 degrees • Original paintwork • Body dimensions – 50 x 50 x 130 cm (width x length x height) Additional information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to power on and test the machine on site • The price listed in the auction does not include VAT or transport costs Financing & Transport: • We organize transport via MDD fleet, courier companies, or external carriers Lodpfjyy Nqxsx Al Iern • Financing options available in the form of leasing or lease credit

Condition: used, functionality: fully functional, Type: BAS Max welding width up to 50 [mm]. Lodpfxjw Snu So Al Iern Flash Butt welding machine. Manual clamping. Blade width up to 50 [mm]. Used machine in working condition. Machine painted. Weld band saw blades for wood up to 50 [mm]. Weld band saw blades for metal up to 34 [mm]. Delivery from stock. Connection: 220 [V]. Weight: cca. 180 [KG]. Packing included.

Condition: new, Year of construction: 2026, The CORMAK MM2315 230V woodworking sander is a high-performance oscillating edge sander designed for precise machining of flat and curved surfaces. Its construction is based on a stable sanding unit with an oscillation function and an adjustable work table, enabling effective and even sanding even under heavy workloads. It is an ideal solution for professional carpentry shops and production facilities expecting reliability, versatility, and high-quality finishing. Key Advantages Belt oscillation – ensures even abrasive wear and extended sanding belt lifespan Curved element sanding – additional side table enables precise machining of complex shapes Quick belt change – lever mechanism allows fast abrasive replacement without tools Adjustable sanding unit – enables both horizontal and vertical operation depending on the workpiece type High belt speed – 980 m/min ensures fast and efficient material removal Compact dimensions with broad capabilities – combines a small footprint with wide application potential Standard Equipment Height-adjustable work table Side table for curved element sanding Movable sanding unit for vertical and horizontal operation Belt oscillation system Quick belt tensioning and replacement mechanism Dust extraction port Ø100 mm Operation manual (Polish language) CE Declaration of Conformity Optional Equipment Professional dust extraction system with dust filter Set of sanding belts with various grit sizes Mobile base with locking mechanism Table with quick angle adjustment system Invest in durability, efficiency, and precision. Choose the CORMAK MM2315 230V wood sander and enhance your workshop’s machining capabilities today. Technical Data Belt size: 2515 × 152 mm Lrjdpsvugq Hjfx Al Isn Work table size: 840 × 300 mm End and edge sanding angle range: 0–45° Additional table size: 300 × 250 mm Table height adjustment: 80 mm Side fence size: 700 × 60 mm Maximum sanding length: 790 mm Dust extraction port diameter: 100 mm Belt speed: 980 m/min Motor power: 2.2 kW Power supply: 230 V Weight: 138 kg Warranty: 12 months Manual (DTR): Yes CE Declaration: Yes

Condition: new, Year of construction: 2026, DT 1500 Grinding Table for Woodworking: Table dimensions (without supporting grid): 1350 x 693 mm – This table area provides sufficient space for working, allowing for the processing of various elements. Supporting grid dimensions: 1440 x 800 mm – The supporting grid provides additional support for the processed materials, increasing stability and work precision. Maximum load capacity: The table is designed to withstand loads of up to 200 kg, enabling the processing of larger elements. Required dust extraction efficiency: The device requires a dust extraction system capable of processing at least 1500 cubic meters of air per hour to ensure proper ventilation and removal of contaminants. Table height adjustment: With height adjustment ranging from 735 to 995 mm, the user can tailor the device to their specific needs and preferences, enhancing work comfort. Application of the Grinding Table: This grinding table is an excellent tool for professional grinding operations in various sectors of the woodworking and furniture industries. The compact design of the workstation makes the product suitable for any workshop environment, enabling material processing, for example, before painting. Thanks to its high-quality construction and adjustable features, it allows for precise and effective work while maintaining appropriate safety standards. Technical Parameters: Length: 1570 mm Width/Depth: 1020 mm Height (adjustable): 735 - 995 mm Net weight: 73 kg Table dimensions (without supporting grid): 1350 x 693 mm Supporting grid dimensions: 1440 x 800 mm Maximum load capacity: 200 kg Lrjdpevugx Rjfx Al Isn Required dust extraction efficiency: 1500 m³/h Dust extraction port diameter: 160 mm Note: The price quoted is the net price. It does not include transportation costs.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, RANDEK REVOLVING CROSS CUT SAW Lrsdpfx Asvryhgjl Ien

Condition: used, Bandsaw Manufacturer: Waco Jonsered AB Model: Bandresaw BK60 Year: 2015 Weight 8000 kg Feed speed: 10-60 m/min Max. cutting height: 300 mm Lrsdpfjwv S Acex Al Isn Max. distance sawband to fence side: 235 mm Max. width of the feed unit: 400 mm Min. distance sawband to sawband: 10 mm Feed rollers, diameter: 165 mm Feed rollers, height: 300 mm Saw wheel, diameter: 1080 mm Saw wheel, width: 100 mm Saw band, cutting speed: 42 m/sec Saw motors: 22 kW Feed unit (frequency converter): 5,5kW

Condition: used, Year of construction: 2016, machine/vehicle number: MACH1097, functionality: fully functional, Sharpening machine for bandsaw blades Foreziennie F120 CNC, code: MACH1097; year: 2016 Lrsdpfx Aljyabw Aj Isn

Year of construction: 2019, condition: used, Sharpening machine for TCT bandsaw blades Forestone 2 Lrodpfxoyabv Sj Al Ion

Condition: repair required (used), PRIMULTINI 1400 headring and carriage Lsdpox Nf Skjfx Al Iern