Used Wire Binding Machine for sale (68,133)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, AGIECHARMILLES CUT 300 SP WIRE EDM MACHINE, YEAR OF MANUFACTURE 2014 FIXED TABLE TRAVEL: X 550, Y 350, Z 400, U 550, V 350 MM MAXIMUM TAPER 30°/400 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 400 MM WIRE SPOOLS UP TO 16 KG RESIDUAL WIRE CUTTER Gujdpjy Twg Uefx Aaxeh WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: repair required (used), Manufacturer: FANUC Type: A04B-0221-B201 The condition of the machine is unknown; it is not functioning. It is being sold in its current condition. !! We do not know what the problem is! Guedpfsik Hb Tsx Aaxoh

Condition: used, Year of construction: 1997, functionality: not functional, type of input current: three-phase, overall weight: 422 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 14 A, Equipment: cooling unit, documentation/manual, We offer this used AGIE AGIECUT 125 wire EDM machine, manufactured in 1997. Type: AGIEPULS MMD Serial number: 491.010 Electrical diagram: 624262.2 Weight: 422 kg Voltage: 3 x 400 V Frequency: 50 / 60 Hz Gusdpoz Affnjfx Aaxeh Rated current: 14.75 A The machine is currently disconnected. All electronic components, circuit boards, and the numerical control unit are intact. We suggest using it for spare parts recovery. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2008, functionality: fully functional, working width: 560 mm, type of input current: AC, infeed height: 340 mm, empty load weight: 3,200 kg, infeed width: 560 mm, Equipment: documentation/manual, Smyth 150 4D Large Thread Sewing Machine, 2008 The machine is still connected to the power supply and has very few operating hours, as it was only used for half shifts! Format ranges & performance: Maximum sheet format: 560 x 340 mm Minimum sheet format: 135 x 80 mm Gjdezpfiyepfx Aaxsuh Maximum mechanical speed: 150 cycles/minute Number of stitches: 13 stitches Stitch length: 24 mm Feeder & opening system: Feeder type: Automatic sheet feeder (4D-Stream Feeder) Opening devices: 4 upper suction devices + 4 lower suction devices (4+4 openings) Overlap opener: Integrated LAP opening system (suction opening for signatures with overlap) Equipment & control: Operation: Computer-controlled setup via a swiveling color touchscreen display Total machine weight: approx. 3,200 kg Video available upon request!

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Approximate format: 480 x 330 mm 3-ton pressure Guodpfjz Rk Rkex Aaxoh

Condition: good (used), Horizon HCB-2 semi-automatic machine for producing hardcover books The machine is in very good condition, little used. The task of the machine is to produce a finished cover, assemble the book block into the cover and joint forming in the finished book. The machine is very easy to set up, operate and service. The machine is equipped with the following elements: touch control monitor table for mounting the cover with a laser pointer module for wrapping veneer edges ironing rollers Godpfxsz N Shno Aaxouh barcode scanner Technical data: – cover size: max. 680.6×340.8mm; min. 322.4 x 169.7 mm – spine thickness: min. 3mm; max. 25mm – cover weight range: 105 – 160 g/m2 – speed: max. 150 cycles/hour – dimensions: 1,800 x 1,050 x 1,536mm – weight: 456kg Power supply: 230 V / 50 Hz instruction manual included and a large set of materials. Ask About The Product

Condition: good (used), Zechini Angolar M automatic corner cutter Production Italy. Perfect condition. This is a professional, production device for rounding corners and for cutting corners for hardcover. A solid cast iron construction, strong pressure ensure precise operation. Replaceable knives (7mm radius knife included) Adjustable margins. Stack height 50mm Weight 110kg Efficiency 40 cycles/min Power supply 400V Gujdez N Silepfx Aaxsh This is the currently produced model.

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Gusdpfx Aasz N Skcsxoh Power supply 380 V + compressed air.

Condition: reconditioned (used), Year of construction: 2006, operating hours: 19,500 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, overall weight: 2,450 kg, Charmilles FI240SL, year 2006. The machine can be inspected at our premises in Semsales during April. The machine will be fully cleaned and serviced. Viewing available on request. Gujdpfoylkr Tjx Aaxsh

Condition: good (used), Hang PiccoStar 102-50 eyeletting machine The device is in perfect condition, ready to work. Technical data: 1 eyeletting head (eyelet hole diameter 5.5mm, outer flange 8mm) Power supply 230V Frontal and side margins Push-button operation. Gusdpfsz N Shuox Aaxoh The device punches holes and crimps the eyelet in one pass. Automatic eyelet feeding.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Godpfsz Rk N Hex Aaxjuh Made in Germany.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES CUT 2000 AWC WIRE EDM MACHINE (DOUBLE HEAD) MANUFACTURED IN 2012 TRAVEL: X 350, Y 250, Z 256, U, V +- 70 MM MAXIMUM TAPER: 30º/100 MM LINEAR GUIDES AUTOMATIC THREADING AND RE-THREADING DOUBLE HEAD OPTION TO WORK WITH 0.05 AND 0.07 MM WIRES ACCEPTABLE WIRE RANGE: 0.05 - 0.33 MM AGIEVISION 5 GENERATOR SUPERFINISH MODULE FOR FINISHES UP TO 0.05Ra Guodpjy Twkasfx Aaxsh RE-THREADING HEIGHT: 220 MM COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit - Clamping devices Gjdpfozucliox Aaxouh - Wire / filters / resin

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: 54452, Wire erosion machine Charmilles P25 Gusdpsz Nhwrofx Aaxeh Year of manufacture: 1983

Condition: like new (used), functionality: fully functional, A very nice book press is for sale. Gujdpfx Aaozwga Nsxeh Brand: Mahez, size 485 x 560 mm. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it onto a truck or container. Please request a price including transport (within the Netherlands). Best regards, Henk Hoos

Condition: used, Year of construction: 2000, functionality: fully functional, Smyth Sewing Machine 160 Maximum Mechanical Speed: 10,800 cycles/hour Min. Signature Size: 80 x 135 mm (off-line) Max. Signature Size: 320 x 420 mm (off-line) Number of Sewing Stitches: 8 Sewing Stitch Length: 24 mm Power Consumption: 4 kW Standard Voltage: 400V–50Hz, 3Ph Max. Air Consumption: 200 Nl/min at 6 bar Godpfxexzzruj Aaxjuh Total Weight: 2500 Kg Machine Dimensions (L x W x H): 1.7 x 2.67 x 1.7 mt

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. Gujdpfxoz Rk Nyo Aaxsh After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 0/41938, BDM20 case maker (book cover machine), 1992 Guodjxqd I Dspfx Aaxsh

Condition: good (used), Kolbus VDB Cover bender This machine is in very good condition and ready to use. Manufactured by Kolbus, Germany. The pressure rollers feature smooth adjustment of the gap and cover straightening power. The entire unit is mounted on a convenient base with wheels. Working width: 750 mm Gusdpfxoz Rk Rds Aaxoh Power supply: 380V Weight: 150 kg

Condition: used, Year of construction: 1970, für MK3 Gsdpfjztfy Tex Aaxsuh weight of the machine ca. 4 t

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 3,000 mm, total width: 2,300 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servo motors Glass scales in X and Y axes Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15“ TFT touch screen monitor Handheld remote control Automatic wire threading with thermal wire cutting, Gsdpfx Aaozhvhwsxeuh Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 230 x 300 x 200 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: € 2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Equipment: fridge, AGIECHARMILLES CUT 30 WIRE EDM MACHINE, YEAR OF MANUFACTURE 2011 Guodjy Tw Tbepfx Aaxeh TRAVEL: X 600, Y 400, Z 350, U/V ±50 MM MAXIMUM TAPER: 25°/80 MM AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT: 350 MM WIRE SPOOLS UP TO 25 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS COOLING UNIT TEST CUT POSSIBILITY

Condition: ready for operation (used), Year of construction: 2000, Müller Martini Amyrs/Prima Year 2000, 8 stations, 1 cover feeder, stitching, three-knife trimming, stacker Production capacity: 14,000 units/hour Min. format: 90 x 105 mm Max. format: 320 x 480 mm Guedpfxjy Siprj Aaxoh

Condition: good (used), functionality: fully functional, For sale is a used universal wire stapling machine, Speckbötel type FEN. This machine is particularly suitable for the production and assembly of wine crates, fruit crates, vegetable crates, and other wooden crates or wooden packaging. The staples are formed directly from the continuous wire feed from the reel within the machine. This makes the machine suitable for continuous operation in crate and packaging production. Technical data / features: Manufacturer: Speckbötel Type: FEN Manufacturing location: Hamburg Machine type: Universal wire stapling machine Design: Wire nailing machine / flat stapling machine Staple formation from continuous wire Processing of wire from a reel Large work table Height-adjustable work area Handwheel for adjustment Heavy-duty and robust industrial design Suitable for the production or assembly of: Wine crates Fruit crates Vegetable crates Packaging crates other wooden crates and wooden packaging Gedpfozymynox Aaxouh The machine is in used condition. Features and condition as shown in the photos. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be available shortly! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Gusdpfx Aaozlc Tbsxeh