Used Window Tool for sale (47,336)

Condition: good (used), 8-position tool turret, manually indexable, for retrofitting 8 x turning tool holders 8 x drilling tool holders Lajdpfx Aswg Rv Nokwjh Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; Lsdpfx Ajy T R Tuskwsah electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial a...

Condition: ready for operation (used), functionality: fully functional, JUTEC Type 3000 with profile bending attachment PB 20 -CE marking -Bending capacity / flat steel 100x8mm -Bending capacity / round material 20mm -Digital angle bending adjustment / display -Material stop -Drive: electromechanical Ledpfoz S Afpox Akweah -Control: digital -6 rpm (bending roller) -Tool holder / hexagon 40mm -Foot switch -Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.5 meters / Weight approx. 85 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: CNC tool milling machine, Deckel Type FP 5 – 80 Lajdo Aa Ikrjpfx Akwsh Year of manufacture 1995 CNC control: Dialog 12 Universal table: 750 x 520 mm Travel distances X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Spindle quill stroke: 80 mm Electronic handwheel Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard.

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Lode Aa Il Aepfx Akwsah Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Ledpezawizsfx Akwjah Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: excellent (used), Year of construction: 2014, 2014 Schneeberger Sirius HPM 6-Axis Tool Grinding Machine With Fanuc Series 31I-Model A5 CNC Control Gear Tooth Production Steptec GFQ 170E Swivel Spindle Workhead. Travel: 'X' Axis = 420mm, 'Y' Axis = 310mm, 'Z' Axis = 340mm. 'A' Axis (Rotation) = 2,400°/S. ISO40, Centre Height 150mm. Swivel Axis 'B' = 90°, Swivel Axis 'C' = 180°. (1) Hitema Stand Alone Air Cooled Liquid Chiller Type ENR.018/CX.SST.WP.HW.RV.DD.GALV (340kg, 2020). (1) Hyfra Pedia Sigma 13-S Stand Alone Water Cooling Chiller (200kg, 2014). VAS 7041, 400 Litre Stand Alone Filtration System (800mm x 1,300mm x 600mm, 400kg). Sirius S/No. 21828. Lodpez E R T Hefx Akweah Quantity of Assorted Arbors, Collets, Grinding Attachments & Associated Tooling to Suit. Probe, Machine Light & Signal Tower. New Battery Fitted 2025. Kraft Bauer Fire Extinguishing System. Elbaron Ronia 100 DV Electrostatic Air Cleaner/Mist Collector. Cosmotec EVE10082207000 7035 Air Conditioner (2013). Power Supply 415 Volt, 3 Phase. Full Catalogues & Manuals Available. Weight of Machine Approx 8,100kg. Dimensions of Machine Approx 1,700mm x 2,270mm x 2,215mm. Note: Client will arrange for the machine to be disconnected and drain the oil (if required) and move to the Exit for collection. During viewing, Client is willing to demonstrate the machine capabilities.

Condition: good (used), Year of construction: 2005, Tool-Temp TT-162 H, year of manufacture approx. 2005, oil Lodpsyzga Tsfx Akwsah

Condition: used, Year of construction: 1988, operating hours: 66,120 h, functionality: fully functional, machine/vehicle number: 152.51.80.8xx, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 32 rpm, type of input current: three-phase, total height: 2,500 mm, total length: 2,100 mm, total width: 2,400 mm, overall weight: 3,100 kg, input voltage: 380 V, Equipment: documentation/manual, CNC milling machine Mikron WF 61 C – Heidenhain + accessories We are selling a Mikron WF 61 C with Heidenhain control from our machine inventory. The machine is offered including accessories, vices, and milling chucks. Machine and equipment: • Manufacturer: Mikron • Model: WF 61 C • Control: Heidenhain • Clamping table with T-slots • Separate control panel • Protective guard in the work area Included in the scope of delivery: • Mikron WF 61 C • Vices • Milling chucks The machine shows signs of wear and tear due to age and use, as well as paint chipping. The current original photos show the visual condition. An inspection is possible by appointment. The exact scope of accessories can be discussed and agreed upon. Laodpfx Ae Aazphjkwsh Terms of sale: Sale exclusively to entrepreneurs within the meaning of § 14 BGB (German Civil Code). The used machine is sold with exclusion of any warranty for defects in materials and workmanship. No guarantee regarding the condition is provided. The exclusion does not apply to the extent that a defect was fraudulently concealed or a guarantee regarding the condition was given. Commercial sale with invoice. Collection and transport by arrangement.

Condition: like new (used), TOOL FOR ROAD BARRIERS Laodpshylzrsfx Akwjh LENGHT 6000mm

Condition: excellent (used), Amada Togu Surface Grinder Tool diameter (min.) Ø 2 Tool diameter (max.) Ø 160 Vertical traverse (mm) 200 Grinding speed: Stations A / B / C (mm/min) 0.06 Stations D / E (mm/min) 0.03 Ledpfxoz R A T Dj Akwjah Dimensions: Length (mm) 750 Width (mm) 800 Height (mm) 1920 Weight (kg) 470

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 500 kg, 📄 Product Description The Tongtai SH-5000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 730/730/830mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Acceleration (X/Y/Z): 9.8 m/s Spindle Speed: 15,000 rpm. Tool Capacity: 60 pieces (upgraded from standard 40). Chip-to-Chip Time: 3.6 s (at 1,800 rpm). Pallet Dimensions: 500 x 500 mm. Max. Workpiece Height: 1,000 mm. Max. Rotation Diameter: 500 mm. Max. Table Load: 500 kg. Automatic Pallet Changer (APC): Included, with a 7 s changeover time. Machine size (Width x Depth x Height): 5,840 x 2,290 x 2,892 mm Machine weight: 12,400 kg. CNC Control: Siemens Sinumerik 840 D with 15" Display and Shopmill interface Internal Cooling: CTS (Coolant Through Spindle) at 70 Bar. Peripheral Equipment: Includes a Disc-type Oil Skimmer and an Oil Mist Collector. Energy Efficiency: Equipped with energy-efficient drives. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Lsdpjxnizdefx Akwoah Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, functionality: fully functional, Several MP 888 controllers from Tool-Temp are available for sale or for exchange. Lsdpfx Aov E Uirjkwoah

Year of construction: 2003, condition: used, Oil temperature control unit Year: 2003 – like new Medium: Oil Laodpfx Akozcat Uoweh Model: TT-288 / MP794 Up to 250°C Cooling capacity approx. 60 kW at 250°C

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Ledpfx Akoy Nfqmowjah Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1982, KLINGELNBERG SNC 30 GRINDER Brand: Klingelnberg Model: SNC 30 Type: Industrial grinder Lasdpfx Aey S Akpjkwjh Year: 1982 Serial number: 3837 FEATURES: – Complete machine – Hydraulic unit and filtration system included – Heavy-duty industrial installation – Precision machine – Equipment visible in the photos

Condition: used, total height: 1,700 mm, total length: 1,400 mm, total width: 900 mm, Year of manufacture: 1970 Colour: Grey Empty weight: 500 kg - Year: 1970 - Serial number: CH - Control: Conventional - Motor power: 1.4kW - Transport dimensions: 1400mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg Lodpfxezry I Ao Akwoah - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, The offered set is a complete tool kit for the repair, disassembly, and commissioning of machine tools. It includes various electrical devices (angle grinders, reciprocating saws, rotary hammers, etc.) as well as measuring and testing devices. The tools are packaged in Einhell transport cases with integrated carrying devices. For mobile use, all tools, including measuring devices and electrical devices, are stored in tool cases (see images). All tools are in working condition and have been regularly replaced when worn. This tool kit has been used to disassemble, repair, and commission a wide variety of machine tools, drilling machines, and welding systems. Lajdez Riv Sepfx Akwoh

Condition: good (used), Year of construction: 2007, Rollomatic GrindSmart 620XS Technical Data Model designation: CNC 620 XS Control system: FANUC, operator panel FANUC PANEL i Loading system: Gripper with workpiece pallets Oil mist separator: Elbaron, included in the scope of supply Accessories: Workpiece pallets and grinding wheel holders as shown in the photos Connection, weight and dimensions Electrical connection: 3 × 400 V / 50 Hz Equipment and scope of supply Elbaron oil mist separator (part of the machine) Loading system with gripper and workpiece pallets Additional workpiece pallets as shown in the photos Grinding wheel holders with grinding wheels as shown in the photos Related accessories as shown in the photos Lajde Aba Tnepfx Akwjh Technical specifications are subject to change without notice. Errors and prior sale are reserved. The characteristics and scope of supply agreed upon in the purchase contract shall apply.

Condition: good (used), Pressing tool, sheet metal former, forming tool, straightening tool, special punches/mandrel elements, centering or positioning tool Lsdpe Aa Tlhefx Akwsah -Manufacturer: Mubea, Punching tool: Pipe notching tool, 18 pieces -Matrices: 8 pieces, sizes 1" to 1 1/4" -Stamps: 10 pieces, sizes 1" to 2" -Quantity/Dimensions: see photos/parts list -Submission/Price: complete -Transport dimensions: 360/170/H45 mm 170/150/H30 mm -Weight: 10.7 kg / 3 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 99500007558, total width: 800 mm, total length: 1,100 mm, total height: 800 mm, input voltage: 230 V, overall weight: 150 kg, table length: 1,100 mm, table width: 800 mm, table height: 800 mm, input frequency: 50 Hz, compressed air connection: 8 bar, The machine is in very good condition and comes from an educational institution. Laedpfxoz E A A Tj Akwjh

Condition: excellent (used), Year of construction: 2016, overall weight: 420 kg, tool diameter: 420 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 450 mm, ZOLLER venturion 450 – CNC setting and measuring device, year of manufacture 2016, very little use The machine was purchased by the previous owner as an additional device and was practically not used; it was sold because it is no longer needed. Accordingly, the usage is very low – the machine is in new condition and fully functional. It is located in Velten and can be inspected while powered on by arrangement. Lasdpfx Ae Advkzskwsh THE ADVANTAGES - Very little use, new condition, last ZOLLER maintenance 12/2022 - CNC drives in X, Z and C: Cutting edge is automatically approached, focused and measured – independent of the operator, even with multi-cutting tools - Non-contact optics with transmitted and incident light: Contour, breakouts, wear and corner radius are detected - pilot 3.0: automatic cutting edge detection, zero point monitoring, tool and adapter management, test protocol, data transfer to the machines - Immediately ready for use with control unit, label printer and adapters SK 40 / VDI 40 / VDI 50 TECHNICAL DATA - Measuring range Z 450 mm · X radius 210 mm (tool Ø up to 420 mm) · Internal jaw depth Ø 100 mm - max. tool weight 50 kg - 100–240 V~, 50/60 Hz, 1 kVA · Compressed air 6–8 bar - W × D × H 2500 × 810 × 1710 mm · Weight 350 kg + control unit approx. 80 kg EQUIPMENT ACCORDING TO FACTORY EQUIPMENT LIST ZOLLER (05/13/2016) 1. Z05MK446.11 USB camera with optics and integrated LED incident light 2. Z05E6187 Transmitted light "pilot" "DLR" / V-series 3. Z05E6127.11 USB camera with optics and integrated LED incident light 4. V429530-01 HGV-ACE mounting assembly vent. 450+600 5. V429515 Accessory kit for drive and ROD "venturion 450/600" 6. N001831 Drive unit linear CNC/"usbmotion" 7. N001831 Drive unit linear CNC/"usbmotion" 8. N001918 Drive unit rotary CNC/"usbmotion" 9. Z05E6024 Foil keyboard "smart-size" for electronics-Z80 10. Z05E7026-01 USB motion controller 11. Z05E6038-00 Valve module Z100-V 12. Z05E6037-20 24V voltage distribution with fuses 13. Z05E6035-10 Lighting module Z100-L 14. Z9700910-36 ZOLLER measuring device control 11th generation panel PC 24" 2980U 15. Z9734883-01 Printer for TH labels, print width 25–108 mm 16. Z9734883-02 Power supply 24V DC 2.5A 60W, 100–240V AC 50/60Hz ADDITIONALLY INCLUDED - Adapters SK 40, VDI 40 and VDI 50 - Control unit on stand with monitor, keyboard and mouse - Software ZOLLER pilot 3.0 - Cables and small parts as shown in the photos Tools and tool holders are not included in the scope of delivery. SERVICE By arrangement: Installation and commissioning · Training · Demonstration under power in Velten · Transport. TRANSACTION Location 16727 Velten near Berlin · FCA Velten incl. loading · 100% prepayment · Delivery 1–2 working days after payment receipt. Data sheet as PDF attached. Technical data according to nameplate, operating manual and factory equipment list (information, not a guarantee of quality according to §§ 434, 443 BGB). Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, DECKEL FP 4 MK Year of manufacture: 1992, with TNC 113 active digital control with positional programming Spindle speeds: 50 - 2500 rpm Travel ranges: X 500, Y 400, Z 400 Feed rate: stepless + rapid traverse Hydraulic tool clamping system SK 40 Hydraulic machine vice Allmatic 125 Universal table Central lubrication, electric, lighting, machine feet, coolant system. Condition: original, not repainted Smooth and quiet operation at all spindle speeds Guideways and axis movements are in perfect condition. Lodpfx Aszxwz Tekweah Weight approx. 1500 kg Can be inspected while powered on. Free loading D - 88433 Schemmerhofen

Condition: used, Profiling milling machine with 2 profiling spindles, hardware milling unit, and sanding unit Technical data and equipment 1. Power supply and compressed air * Electrical connection: 3-phase, 380 V, 50 Hz * Compressed air requirement: approx. 13 NL/min * Operating pressure: 8 bar * Compressed air quality: according to Pneurop 6611 2. Profiling spindle 1 * Spindle arrangement: right * Drive power: 11 kW * Speed: 7,000 RPM * Direction of rotation: clockwise and counterclockwise * Spindle diameter: 40 mm * Effective length: 252 mm * Max. tool diameter: 230 mm Vertical positioning: * U-shaped movement of the profiling spindle * Pneumatic cylinder with 120 mm stroke * 2 tool positions * Position detection via limit switches Horizontal positioning: * Pneumatic forward and backward movement * Position detection via limit switches * Automatic plunge function with adjustable plunge speed for tear-free milling * Protective and extraction hood with extraction nozzle Ø 140 mm 3. Profiling spindle 2 * Spindle arrangement: right * Drive power: 11 kW * Speed: 7,000 RPM * Direction of rotation: counterclockwise * Spindle diameter: 50 mm * Effective length: 272 mm * Max. tool diameter: 230 mm Vertical positioning: * U-shaped movement of the profiling spindle Ljdpfx Aksz S Nrpswjah * Pneumatic cylinder with 90 mm stroke * 3 tool positions * Position detection via limit switches Horizontal positioning: * Pneumatic forward and backward movement * Position detection via limit switches * Protective and extraction hood with extraction nozzle Ø 140 mm 4. Hardware milling unit EG * Spindle arrangement: right * Drive: Three-phase motor, 3 kW * Speed: 6,000 RPM * Spindle diameter: 30 mm * Effective length: 47 mm Positioning: * Vertical positioning: not available * Horizontal positioning: pneumatic forward and backward movement * Position detection via limit switch (rear position) * Protective and extraction hood with extraction nozzle Ø 80 mm 5. Stop system * 1. Stop in front of profiling spindle 1: * Manual chip removal * Quick adjustment via parallelogram guide * 2. Stop between profiling spindle 1 and 2: * Pneumatically adjustable chip removal * 3. Stop behind profiling spindle 2: * Fixed stop 6. Sanding unit * Sanding unit with automatic infeed and outfeed 7. Feed device * Roller spacing (center to center): 130 mm * Roller diameter: 110 mm * Roller width: 50 mm * Feed device can be swiveled away * Pneumatic control of the working stroke 8. Support rail for edge milling * Rail length: approx. 3,000 mm * Adjustment range forward: approx. 100–600 mm

Condition: good (used), Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, drill holder -Tool holder: CNC tool holder, 12 pieces -Type: VDI 50 -Specifications: see photos / parts list -Submission/Price: complete Lasdpfx Ao Aayaxskwsh -Transport dimensions: 430/310/H215 mm -Weight: 48.5 kg