Used Windings Stator Rotor for sale (2,346)

Condition: used, Year of construction: 2017, Overview The winder was manufactured in 2017 by the Spanish manufacturer movitec. It is in operation until the end of September 2023 and can be visited at any time.  Technical data  Max. 120 pallets/ h (with 10 wraps) Dimensions (LxWxH): 5240mm x 3825mm x 4184mm Weight: 2.000kg  Foil width: 500mm  Main frame made of steel  Rotating ring with unwinding device for prestretch film Motorized prestretch system Cutting and welding system Scope of delivery  Protective fence  Winder | Movitec | Saturn S6 | 2017 Compressor | Josval | EDS-900 | 2016 Fodpfx Ajl Uyfkjikepp

Condition: new, Year of construction: 2026, Drilling machines for bottom hinges and window handles for precise and efficient drilling of windows. Short introduction: • No setup times between drilling of bottom hinges and window handles • The advantages of drilling from underneath • Accessory kit for bottom hinges • Drilling pattern according manufacturer (e.g. G-U, Roto , Maco, Siegenia Aubi, Winkhaus ... and other manufacturers) • Accessory kit for window handles • Massive precision drilling unit from GANNOMAT Fpjdpfxodx R Hzo Aikop

Condition: like new (used), Year of construction: 2012, I sell the wooden window assembly table OMGA BA825 (+A+U). Year 2012 All complete. Very good condition. Available immediately. Fsdpot Ndz Ujfx Aikepp

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, TECHNICAL DETAILS Process Flow Continuous feeding of copper wire via an automatic double unwinder with flying splice capability Inductive wire preheating for moisture removal and improved adhesion Full insulation using a Rosendahl Automotive main extruder and a highly precise crosshead die Cooling and extraction Multi-stage, temperature-controlled telescopic water cooling trough for stress-free solidification of the plastic Synchronized precision caterpillar puller for consistent line speed Quality assurance and winding Laser diameter and ovality measurement Eccentricity measurement for monitoring consistent wall thickness High-voltage spark tester for real-time fault detection Uninterrupted winding onto process drums MACHINE DETAILS Machine type: High-speed full insulation line Design: Fully automatic system for thin-walled vehicle lines Year of manufacture: 2020 EQUIPMENT Automatic double unwinder with flying splice capability Inductive wire preheating Rosendahl Automotive main extruder Highly precise crosshead die Temperature-controlled telescopic water cooling trough Fsdpfjz N A Npjx Aikspp Precision caterpillar puller Laser diameter and ovality measurement Eccentricity measurement High-voltage spark tester Automatic double spool winder

Condition: excellent (used), Manufacturer: Indramat spindle motor with Emag spindle Type: 1MB 310 D-6DB-A094A1/SO20 Rotor: 1MR 310 D-A094/SO20 Stator: 1MS 310 D-6B-A1/SO20 Pn 19 kW P kb 27 kW n N 700 rpm n max 6000 rpm Condition: Used, fully functional 2 units available in stock. Fodpov U Ag Dofx Aikspp

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Weinig Unicontrol 6 For sale on behalf of a customer, to be collected from site Machine can be viewed whilst still in operation Includes tools IV 77, IV 68; see PDF attachments ----- Technical Data Summary (please enquire about any additional accessories that may be included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally infinitely adjustable > Number of tools: 1 > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment beam for identifying the cut section > NC length stop, mounted on slotted table, included Positioning of the crosscut saw integrated into the control system. > Length 3,500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: 3/4 (pneumatic stroke) > Tool clamping length: 320 mm > Vertical spindle stroke: > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotating spindle) ----- > Position: vertical, right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- ----- > Position: vertical, right > Number of tools: 3/4 (pneumatic stroke) > Tool clamping length: 320 mm > Vertical spindle stroke: > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool swing: 232 mm > Motor power: 11 kW Pos. 5: Horizontal top profiling milling unit ----- > Clamping length: 40 mm > Number of tools: 2 > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing diameter: 130 mm > Axial travel: 2 positions > Radial travel: 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical, right > Number of tools: 3 > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing radius: 210 mm > Motor power: 3.0 kW Further features ----- > Online-capable > Beveling device for tear-free beveling > Double-part package > Return conveyor for single-operator use: vane conveyor > On-screen control > Bevel window device > Electronic angle display for bevel window > Electric feed height adjustment Fodpfs Agphgox Aikspp > Industrial PC, PC control/NEXUS ----- Price of the above machine available on request! ----- Should the technical specifications of this machine not meet your requirements, please do not hesitate to contact us. Our team, with many years of experience, will be happy to assist you with any necessary adjustments or in finding a machine that meets your requirements! ----- (Technical data as provided by the manufacturer – subject to change without notice!)

Year of construction: 2003, condition: used, Manufacturer: GEA Process Engineering S.A.S. Model: Batch Formula Coaxial Manufacturer’s description: Food preparation tank Year of manufacture: 2023 Identification numbers: 2023/01 – 2023/02 – 2023/03 Fsde Ahkz Ujpfx Aikepp Machine type: Preparation vessel with high-shear mixer at the bottom of the vessel and coaxial mixing + scrapers Application: Food product preparation Function: Batch mixing, dispersion and emulsification Set - Quantity available: 3 identical units - Storage condition: disassembled, stored on the Osertech premises Tank specifications - Volume: 5,000 L - Useful volume: 3,000 L - Pressure: -1 / 3 barG - Temperature: 0–100°C - Jacketed : -1/5 barG; 145°C - Maximum dry matter content: 80 per cent - Maximum viscosity: 50,000 cP - Maximum powder feed rate: 100 kg/min - Material of parts in contact with the product: AISI 316L stainless steel - Tank bottom: high-speed agitator - Domed lid with manhole secured by knobs - CIP/NEP cleaning balls - Inspection window - Pressure gauge at the top Vacuum pump - Manufacturer: Busch - Model: LX 0330 C AM0 - Ultimate pressure: 33 mbar Product pump- Fristam FDS 2-5: twin-screw- Flow rate: 3,650 – 35,000 L/h- Viscosity: 7,500 – 16,500 mPas High-shear mixer - Rotor / stator - Power: 90 kW Coaxial agitation - Agitation unit manufacturer: PMS – Process Mixing Solutions - Scraper impeller with scrapers - Propeller shaft: 2 rows of propellers offset by 60° Gear motor 1 - Power: 11 kW at 1,465 rpm - Output speed: 21 rpm Gear motor 2 - Power: 9.2 kW at 1,470 rpm - Output speed: 53 rpm Requires a new electrical box (power/control). This request may be subject to a separate quotation.

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Fpjdpfx Aisz Hxfaokjp Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Year of construction: 2002, condition: used, functionality: fully functional, air pressure: 6 bar, machine/vehicle number: 2550020022, Window assembly table FAZ 2800. Not used for a while, but functional. Can be seen at work in Croatia. Fpedpfxj Aicabs Aiksp

Condition: excellent (used), pressure: 3 bar, temperature: 134 °C, type of input current: three-phase, input voltage: 400 V, usable tank capacity: 2,500 l, Used Becomix production plant consisting of main mixer RW2500 and pre-mix vessel AB1200 for mixing, dispersing, homogenizing and emulsifying on an industrial scale. Originally used for sterile skin care products. Very good condition, complete overhaul in our own workshop planned (new seals, piping, pneumatics and control, homogenizer and drives overhauled), new stainless steel platform included. MAIN MIXER RW2500 • Working volume approx. 600–2,500 L, total volume approx. 3,458 L, 316L mirror polished • 0–3 bar, vacuum to -1 bar, up to 134 °C, jacket, TÜV approved • Anchor agitator with PTFE scrapers approx. 30 kW, rotor-stator homogenizer approx. 45 kW (5–25 m/s) • Recirculation line DN100, hydraulic lid PRE-MIX VESSEL AB1200 • Working volume approx. 400–1,200 L, turbo agitator, two-zone heating, transfer line FURTHER EQUIPMENT Fjdpfxs Ad H Iqs Aikjpp • CIP for both vessels incl. CIP rack, CIP/SIP capable, aseptic valves • Water ring vacuum pump approx. 200 m³/h, powder suction and liquid dosing • New Siemens PLC with touch panel, recipe control, GMP documentation SERVICE • Turn-key installation and commissioning available • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Year of construction: 1987, condition: ready for operation (used), Max. coil weight: 10t, controls: SIEMENS S5, without documentation. Fpedpfx Aogwg Udoikep

Year of construction: 2007, condition: ready for operation (used), A wooden window sash assembly line consisting of three main components is available. 1) Sash stop table with punching unit and Powasert automatic screwdriver. 2) Max Striffler glazing bead saw. 3) Ruchser RU-GOB-ES corner hinge and handle drilling machine, year of manufacture: 2007. Documentation available. An on-site inspection is possible. Package sale only. Fpjdpfx Aiszi Eimskep

Condition: used, machine/vehicle number: 10875, 3-blade rotor 2 rows of stator blades Fjdpfx Aishqt Hpjkjpp Rotor diameter: 280 mm Rotor width: 600 mm Inlet cross-section: approx. 280 x 600 mm Weight: approx. 800 kg

Condition: used, machine/vehicle number: 5257, Inlet: 800 x 200 mm Rotor diameter: 200 mm Width: 880 mm Rotor blades: 3 Stator blades: 2 Fjdeyr I E Repfx Aikspp Drive: 5.5 kW

Condition: used, machine/vehicle number: 11629, Rotor diameter: 450 mm Rotor width: 800 mm 5 x 5 blade rotor (offset) 2 rows of stator blades Fpodpfx Asyr Tlveikep Inlet cross-section approx. 600 x 800 mm Drive motor 55 kW With soundproof box, mobile

Condition: used, machine/vehicle number: 9993, 9-blade rotor 3 rows of stator blades Rotor diameter 400 mm Working width 500 mm Inlet cross-section for window profile bars approx. 200 x 460 mm Drive motor 30.0 kW Fsdpoyr Tk Eofx Aikepp

Condition: used, machine/vehicle number: 14039, Rotor diameter: 260 mm Rotor width: 410 mm Rotor knives: 3 Stator knives: 2 Infeed opening approx.: 410×600 mm Drive motor: approx. 11 kW Fedpfjyr Tzkex Aikjpp

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Fpodpfx Aeyr Tmmsikop Rotor width: 300 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Drive motor 11 kW With noise protection box, noise protection hopper, and exhaust fan

Condition: used, machine/vehicle number: 3349, 2-blade double rotor 3 rows of stator blades Fsdpfx Aisyr Thwekspp Rotor diameter: 150 mm Working width: 200 mm Inlet cross-section: approx. 350 x 210 mm

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Rotor width: 600 mm Fpedpfx Aoyr Tkxoikop 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 250 x 600 mm Drive motor 37 kW

Condition: used, machine/vehicle number: 8802, Infeed cross-section approx. 650×1000 mm 3-knife rotor (knives arranged offset) 2 stator knife rows Rotor diameter 500 mm Fpodpfx Aeyr Tiusikop Rotor width 1000 mm

Condition: used, machine/vehicle number: 11627, Rotor diameter: 220 mm Rotor width: 160 mm Rotor knives: 3 Stator knives: 2 Fedpfxjyr Tt Hj Aikspp Infeed opening approx. 400×400 mm Drive motor: 6.5 kW

Condition: used, machine/vehicle number: 11924, Rotor diameter: 500 mm Fjdpfx Aeyr Tm Hjikepp Rotor width: 800 mm 5-blade rotor 2 rows of stator blades Inlet cross-section approx. 800 x 450 mm Drive motor: 55 kW

Condition: used, machine/vehicle number: 12598, Rotor diameter: 600 mm Rotor width: 1450 mm 7-knife rotor 3 rows of stator knives Fpjdpfxeyr Tpzs Aikjp Infeed opening approx. 780 x 1490 mm Drive motor: 132 kW

Condition: used, machine/vehicle number: 12625, Rotor diameter: 800 mm Rotor width: 1500 mm 6-knife rotor 4 rows of stator knives Fjdpfxoyr Tqfs Aikjpp Infeed cross-section approx. 820 x 1500 mm Drive motor: 160 kW