Used Wheelchair Motor for sale (24,520)

Condition: new, power: 140 kW (190.35 HP), fuel type: electric, number of seats: 19, gearing type: automatic, color: white, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Iveco C 70 order vehicle (base vehicle available), quick delivery guaranteed. Base vehicle: original Iveco with front air conditioning, automatic climate control, and air suspension. Electric motor: 140 kW Battery capacity: 111 kW net Fast charger: 80 kW Maximum speed: 100 km/h Conversion/modification as follows: - Iveco C70 rear low-floor with extension - Overall length approx. 7800 mm - Electric door at the front with recessed entry - Double-width electric door at the rear - 15 city seats - In the low-floor rear section, 4 folding seats and 1 wheelchair/stroller space - Manual folding ramp and standing areas (folding seats count as standing areas) - Total capacity: 30 passengers - Air conditioning in the passenger compartment: Eberspächer 7 kW - Front air conditioning/heating - Electric convector heaters in the passenger compartment - Double-glazed windows in the original opening - Radio with 2 speakers at the driver's seat + 4 in the passenger compartment - Grab rails with hand loops - Interior lighting: white/orange or white/blue Ksdpfxezk A R Rs Adqsdr - Lane keeping assist / collision assist - Optional: diesel auxiliary heater with air, destination display, interior monitor, Wi-Fi, infection protection screen, etc. - The vehicle is eligible for funding in most federal states and complies with paragraph 30d, section 4 of the StVZO (German Road Traffic Licensing Regulations). Price for this vehicle as described: 174,990 euros. The offered vehicle is eligible for the environmental bonus as financial support for buyers of electric vehicles, according to the list of eligible electric vehicles, available on the BAFA (German Federal Office for Economic Affairs and Export Control) website. The offered vehicle is eligible for the environmental bonus as financial support for buyers of electric vehicles, according to the list of eligible electric vehicles, available on the BAFA (German Federal Office for Economic Affairs and Export Control) website.

Condition: used, mileage: 266,000 km, power: 315 kW (428.28 HP), first registration: 06/2021, fuel type: diesel, number of seats: 51, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, Setra S 516 HD Good condition * MB engine, 315 kW, Euro 6 * MB PowerShift transmission * ABA emergency braking assistant * ART distance control cruise control * Lane keeping assistant * Attention Assist * ESP, ABS, ASR * Retarder * Automatic climate control * Pre-selectable auxiliary heater * 48 + 2 + 1 seats * Reclining/sideways adjustable sleeping seats in partial leather with tables, nets, footrests, armrests, seatbelts and headrests * USB ports for each seat * Adjustable companion seat * Floor with wood-look finish * Refrigerator * Toilet with washbasin, frost protection heater * Service sets with nozzle ventilation, reading lights * Radio, CD MP3, USB, microphone * DVD video system with 2 flat-screen monitors * Bluetooth telephony * Navigation system * Navigation display on screens * Xenon headlights * Fog lights Kdsdpfjyl Eluox Adqsr * Electrically adjustable and heated exterior mirrors * Rearview camera with washer nozzle * Camera on door 2 * Light sensor * Rain sensor * On-board computer * Tire pressure sensors * Driver's seat with air suspension, 3 air cushions, swiveling, armrests, seat heating & ventilation * Sleeper cabin * Kneeling system * Parking brake, hill start assist * Double glazing * Curtains * Electrically operated front windshield roller blinds, roller blind for driver's window * 2 electric glass sunroofs * Large luggage compartment * Ski carrier attachments * Wheel hubcaps All information without guarantee, errors and prior sale reserved. Inspection possible at any time by prior appointment! Customers reading this advertisement on Truckscout, please request further pictures by email as this portal is unfortunately limited to 15 pictures! Further information: also via WhatsApp Info in Polish: WhatsApp Your French-speaking contact: Georges Spengelin

Condition: used, Electric motor, reversing motor, induction motor, reversible motor -Manufacturer: Sesame Motor Corp., Electric Motor Reversible Motor -Type: unfortunately without type designation Kedpfx Adep Udipeqjdr -Speed: approx. 1480 rpm -Shaft: Ø 11 x 20 mm -Quantity: 3x motor available -Price per piece -Dimension: 150/90/H90 mm -Weight: 3.0 kg/pc.

Condition: used, mileage: 175,000 km, power: 300 kW (407.89 HP), first registration: 05/2022, fuel type: diesel, number of seats: 45, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, parking heater,

Condition: used, mileage: 287,000 km, first registration: 10/2018, fuel type: diesel, number of seats: 36, gearing type: automatic, emission class: euro6, color: blue, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, * Our internal number: 1171 * S 511 HD * NEWLY PAINTED * PICK-UP PRICE - Price for collection * Well-maintained vehicle * CLUB BUS with tables * Low mileage (inspection report available) * 290 kW / EURO 6 * Automatic transmission * Retarder * Air conditioning * Auxiliary heater * Large roof hatches * 36 seats * Armrests between the seats * USB sockets Ksdpfx Adeyhuczoqsdr * Footrests * Folding tables * Navigation system * Central aisle camera * SUITABLE FOR REGULAR ROUTES with standing room * Trunk lid – lifting mechanism * Ski carrier/roof box preparation at the rear * Front camera – installed * Fire alarm system / extinguishing system installed * Minor dents on the vehicle. * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may be in use / mileage and condition may vary * All information is subject to change without notice * We reserve the right to sell the vehicle in the meantime * We refer to our general terms and conditions.

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026 and will continue to operate until August 5, 2026. The machine has the following configuration: Edge milling unit 1802 Motor power: 2 x 2.0 kW 1st milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for edge milling unit 2nd milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for edge milling unit Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Reservoir for 14 cartridges (1.4 kg) GluJet collection container Printing unit 1913 MOT Kdjdpfxezrf Nro Adqjr Cutting unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile milling unit 1833 MOT4 1st milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2nd milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Tungsten carbide reversible inserts for scraping blade holder R = 2 mm (2 pieces required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide rail length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - tactile probe vertical, top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,500 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Machine construction: Welded steel frame; bending system: Wedge drive; crowning: Included, adjustable via machine control • Manipulation and positioning • 2-axis part manipulator with suction cups (X travel 2,653 mm; stroke 100 mm; 12 suction modules) • 5-axis rear stop; rotary manipulator; front stop; loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop speed: 3,000 mm/s • Part manipulator speed: 3,000 mm/s • Rotary manipulator speed: up to 3 rev/s • ToolMaster Bend speed: 2,400 mm/s • Positioning accuracy • Y-axis: 0.10 mm; X-axis: 0.05 mm; R-axis: 0.05 mm • CNC control • 21.5-inch touchscreen; OS: Windows 7 Ultimate 64-bit • Keyboard and mouse; USB; RJ45 network; Ethernet 10/100 Mbit/s • Internet teleservice / remote diagnostics • Bend angle measurement Kdsdpfxjzvdc Sj Adqer • Optical bend-angle assistance; integrated camera; graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety equipment • CE certification; rotating safety doors; safety light barriers; working-area access protection • Foot switch with enable function; emergency stop • Electrical data: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation/feeding/transfer; automatic finished-part unloading • Belt conveyor for finished parts; max blank size 3,048 x 1,500 mm • Storage interface included • Loading trolley: Not included; Rail set: Not included • Tooling and tool systems • ToolMaster Bend: Automatic hold-down tool positioning and setup; automatic positioning of standard, Pick&Place, and curved holders • Included tooling: 16 standard hold-down tools (160 mm each); 6 Pick&Place hold-down tools; Pick&Place segments 10/15/20/40 mm; corner hold-down tool (199 mm); OBW90 and UBW90 bending tools • ENW equipment: ENW function for tilting hold-down tools; ENW110-40 tool (length 3,123 mm; depth 40 mm); min bending width with ENW tools 40 mm • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules; 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Software and data capture • TecZone Fold floating license: automatic programming from 2D/3D data, automatic bending program generation, 3D simulation, collision checking, manual modification • Wireless 2D code reader with Bluetooth: barcode and DataMatrix reading; automatic production program loading

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 06584, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, controller model: Hurco Ultimax, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Axes: 3 Travel in X-axis: 1,020 mm Travel in Y-axis: 510 mm Travel in Z-axis: 610 mm Spindle speed (max.): 8,000 rpm Motor power: 15 kW Table length: 1,220 mm Table width: 510 mm MACHINE DETAILS Control system: Hurco Ultimax Drive system: CNC Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,350 x 2,400 mm Weight: 5,000 kg Shipping packages: 1 EQUIPMENT Documentation Kjdpfxjzuw A Ns Adqjdr CE marking

Condition: ready for operation (used), Dunkermotoren GR 52.0 T6 11 motor, 88403, V / 2.2A / 3000-8000 rpm, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ksdpfszqxviex Adqsdr

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 3093-002, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, BJM FTB-100K – Automatic PVC Profile Cutting Center For sale: BJM FTB-100K automatic profile cutting center, designed exclusively for cutting PVC profiles. The machine does not have a milling function. The machine was previously used for cutting Kömmerling 70, 76 MD and 88 MD PVC profiles. The machine is currently packed and stored. It was taken out of production because a new machining center with milling capabilities was purchased. Technical specifications Manufacturer: BJM Model: FTB-100K Year of manufacture: 2003 Machine No.: 3093-002 Power supply: 400 V, 3-phase Saw blade diameter: 500 mm Maximum profile width: 120 mm Maximum profile height: approx. 140 mm Cutting angles: 45°, 90° and 135° Number of saws: 3 Kdjdpfx Adeztv Nfsqsr Maximum profile length: 6,500 mm Minimum finished part length: 280 mm Input: XML cutting list files Labelling: Automatic label printing is available The machine is suitable for automated cutting of PVC window and door profiles and can process cutting lists supplied as XML files. The machine is sold as a used machine and is currently stored in packed condition.

Condition: used, A used VR Twin Paddle Mixer - tested and working but will need new switchgear for motors with relevant safety interlock connected Video available by request on Whats App Ready to ship worldwide Kdodpfozc Nz Uex Adqor Open to realistic offers

Condition: used, mileage: 972,630 km, power: 290 kW (394.29 HP), first registration: 04/2014, fuel type: diesel, number of seats: 57, gearing type: automatic, next inspection (TÜV): 02/2027, emission class: euro6, color: white, brakes: retarder, Year of construction: 2014, Equipment: ABS, air conditioning, bathroom, parking heater,

Condition: like new (used), Year of construction: 2022, power: 2.2 kW (2.99 HP), SEW Eurodrive KH77 DRN90L4/BE2/DI/DFC/IV Manufacturer: SEW Eurodrive Type: KH77 DRN90L4/BE2/DI/DFC/IV Serial Number: 01.8125801513.0001.22 Technical Data Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed [rpm]: 2900 Output Speed [rpm]: 33 - 1.6 Total Gear Ratio [i]: 88.97 Max. Torque [Nm]: 1,550 Output Torque [Nm]: 645 Service Factor SEW-FB: 2.40 Design: IM M1A ISO Designation: CLP 220 Lubricant Type: Mineral Oil Lubricant Quantity [l]: 2.10 Motor Power [kW]: 2.2 / 0.11 Motor Rated Power [kW]: 1,500 Motor Frequency [Hz]: 100 Mains Rated Frequency [Hz]: 50-60 +/- 5% Supply Voltage [V]: 3x AC 380 -5% to AC 500 +10% Mains Rated Current [A]: 5.00 Output Rated Current [A]: 5.5 Kodpfx Adszrdg Nsqjdr Duty Cycle S1-S10: S1 Adjustment Range (VT): 1:20 Motor Voltage [V] / Switching Mode: 230 Delta Motor Mains Frequency [Hz]: 50 cos phi: 0.74 Insulation Class [°C] / Protection Class [IP]: 155(F) / 54 International Efficiency Class: IE3 Motor Mains Efficiency [%]: 85.6 Efficiency at 50/75% Pn [%]: 84.6 / 86.1 Ambient Temperature Min. [°C]: -20 Ambient Temperature Max. [°C]: 40 Brake Voltage [V] / Brake Torque [Nm]: 400 AC / 10 Brake Rectifier: none Nameplate: German Weight: 78.00 kg SEW Eurodrive Gear Motors – Various Types Immediately Available Several high-quality gear motors from the manufacturer SEW-EURODRIVE are available for sale in various sizes and designs. These drives are ideally suited for use in machinery and plant engineering, in material handling technology, and for numerous industrial applications. Available Types: 1. SEW KH107/T DRN132S4/BE11HR/ASE1/TF Motor Speed: 1,461 / 12 rpm Total Gear Ratio: i = 121.46 Max. Permissible Torque (Ma max): 8,000 Nm Output Torque: 4,370 Nm 2. SEW KH77 DRN90L4/BE2/DI/DFC/IV Including Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 33 – 1.6 rpm Total Gear Ratio: i = 88.97 Max. Permissible Torque (Ma max): 1,550 Nm Output Torque: 645 Nm 3. SEW KH67/T DRN90L4/BE2/ASB1/Z Speed: 1,461 / 26 rpm Total Gear Ratio: i = 57.28 Max. Permissible Torque (Ma max): 820 Nm Output Torque: 560 Nm 4. SEW K57 DRN80MK4/BE1/ASB1/Z Speed: 1,435 / 13 rpm Total Gear Ratio: i = 108.29 Max. Permissible Torque (Ma max): 600 Nm Output Torque: 395 Nm 5. SEW KH37 DRN71M4/BE05/DI/DFC/IV Including Decentralized Inverter: DFC20A-0020-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 30 – 1.5 rpm Total Gear Ratio: i = 97.81 Max. Permissible Torque (Ma max): 200 Nm Output Torque: 177 Nm General Information Manufacturer: SEW-EURODRIVE Robust Industrial Quality Various Power and Torque Ranges Available Partially with Integrated Decentralized Frequency Inverter (DFC) Ideal as a Replacement Drive or for New Projects

Condition: used, Year of construction: 2003, functionality: unexamined, ABB IRB 1400 M2000 Robotic Welding Cell – Suitable for Parts or Refurbishment – Ireland Location: Ireland Condition: Used Power: 400V, 3 Phase Complete ABB robotic welding cell featuring an ABB IRB 1400 M2000 6-axis industrial robot with controller, teach pendant, dual-station welding fixture and full safety enclosure. Originally configured as a production robotic welding system (Plant Ref: XRWO11). This system is suitable for refurbishment, retrofit, or breaking for parts and spares. Can be sold complete or dismantled and sold separately. Included in Sale: • ABB IRB 1400 M2000 6-Axis Robot • ABB S4C+ Controller Cabinet (400V 3-Phase) • ABB Teach Pendant • Dual-Station Welding Fixture / Positioner • Robot Pedestal Base • Full Steel Safety Enclosure / Welding Booth Robot Specifications: Model: ABB IRB 1400 M2000 Axes: 6 Reach: Approx. 1.44m Payload: 5–6 kg Repeatability: ±0.05 mm Manufactured in Sweden System is complete as seen in photos. Industrial used condition. Operational status not confirmed. Ideal for buyers looking for spare parts including robot arm, controller, drives, teach pendant, servo motors, or welding fixtures. Components can be removed and sold individually if required. Ksdpjymd E Nefx Adqodr Forklift loading available. Inspection welcome by appointment. Asking Price: €5000+ VAT (or nearest offer) Enquiries welcome for complete system or individual components.

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 72122, functionality: fully functional, working width: 900 mm, number of spindles: 17, spindle speed (max.): 24,000 rpm, working height: 70 mm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 900 mm Working area, Z-axis: 70 mm Milling unit Number of milling spindles: 1 Tool holder interface: ISO 30 Spindle speed range: 12,000 – 24,000 rpm Spindle speed control: stepless Drilling unit Number of horizontal drilling spindles: 6 Number of vertical drilling spindles: 10 Sawing unit Manual operation MACHINE DETAILS Power of main motor: 4 kW Connected power: 12 kW Voltage: 400 V Current consumption: 22 A Fuse rating: 32 A Dimensions & Weight Transport dimensions (L × W × H): 2,000 × 2,600 × 2,700 mm Transport weight: 1,500 kg Number of transport packages: 1 Kodozulv Dspfx Adqsdr EQUIPMENT CE marking

Condition: used, Year of construction: 2008, power capacity / kW volt / V ampere / A Ksdpfjylz R Tex Adqjdr SIEMENS SERVO MOTOR 1FK7064-7AF71-1TA0 TOP CONDITION Condition: used (functional)

Condition: not inspected (used), power capacity / kW volt / V Kedpjy S Ebwjfx Adqjdr

Condition: used, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor unused original packaging Kjdem Ui Idepfx Adqodr -Type PK268-02B -Shaft: Ø 6 x 18 mm -Dimensions cardboard: 140/80/H70 mm -Weight: 1.1 kg/pc.

Condition: new, mileage: 500 km, power: 353 kW (479.95 HP), fuel type: diesel, number of seats: 63, gearing type: automatic, color: white, brakes: retarder, Year of construction: 2025, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), onboard kitchen, parking heater, soot filter, MAN Lion's Coach Pre-series vehicles 63 seats 2026 white silver MAN Lion's Coach R 08 Year of manufacture: 2025 100 km/h Vehicle length: 13.8 m MAN TipMatic 12 OD gearbox Retarder Leather steering wheel ABS, TCS, EBS Heated windscreen Electrically adjustable and heated side mirrors 3t trailer coupling LED interior lights Toilet Kitchen with coffee machine Reversing camera Passenger compartment heating Cooling capacity max. 38 kW Konvekta air-conditioning system Heating under driver's seat Kdodpjynu Htsfx Adqjr Valeo heater Roof air-conditioning unit LCD monitor DVD player 525 liter diesel tank 170 liter AdBlue MAN Air Management System LED front lights etc. We are happy to send you the equipment list on request Call us Net export possible Financing available Subject to prior sale, errors, and changes

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, number of seats: 30, gearing type: automatic, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, New vehicle without registration, immediately available with automatic transmission, double glazing, and auxiliary heating! 5x facelift model. The ideal school bus or small coach for groups with limited budgets. Built for Germany with double glazing, auxiliary heating, and a 24-month warranty, optionally extendable. 29 reclining seats with folding tables. ----General Vehicle Data: * Length 7,168 mm * Width 2,262 mm * Height 3,352 mm * Wheelbase 3,350 mm * Front/rear overhang 1,613 mm / 2,205 mm * Turning circle diameter 12,200 mm * Passenger capacity 29 + 1 * Permissible total weight 8,160 kg * Diesel tank volume 160 l * AdBlue tank 12 l Drive: * Type E6 MFTBC 4P10-HAT4 (Mitsubishi) * 4-cylinder in-line engine * Type automatic transmission * Emission standard Euro 6e * Displacement 2,998 cm³ * Power 110 kW / 150 hp at 3,500 rpm * Max. torque 370 Nm at 1320 rpm * Fire extinguishing system in the engine compartment Braking system and safety systems: * Disc brakes * EBS (electronic braking system) * ESP (electronic stability program) * ABS (anti-lock braking system) * ASR (traction control system) * AEBS (emergency braking assist) * LDWS (lane departure warning system) Climate / Heating / Ventilation: * Roof-mounted air conditioning system Safkar * Convector heating on the side walls Kjdpfx Aozvxpgodqodr * 1 roof hatch, manual operation * Auxiliary heater Eberspächer Doors: * Door 1, single-leaf, front * Door 2, single-leaf, rear * Control, electric Accessories: * Fire extinguisher 1 x 6 kg * First aid kit * Emergency hammer Our company has been on the market for 35 years. You can inspect and test drive the vehicles with us. You will be received at our company premises, and not in some random parking lot. Our business address is not just a mailbox in an apartment building. These mailboxes tend to disappear after a few months.

Condition: used, mileage: 264,000 km, power: 315 kW (428.28 HP), first registration: 06/2021, fuel type: diesel, number of seats: 51, gearing type: automatic, emission class: euro6, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, Setra S 516 HD Good condition * MB engine, 315 kW, Euro 6 * MB PowerShift transmission * ABA emergency braking assistant * ART adaptive cruise control Kjdpfx Ajzfu D Esdqodr * Lane keeping assistant * Attention Assist * ESP, ABS, ASR * Retarder * Automatic climate control * Pre-selectable auxiliary heater * 48 + 2 + 1 seats * Reclining/sideways adjustable sleeper seats in partial leather with tables, nets, footrests, armrests, seatbelts and headrests * USB ports for each seat * Adjustable co-driver's seat * Wooden-look flooring * Refrigerator * Toilet with sink, frost protection heating * Service sets with nozzle ventilation, reading lights * Radio, CD, MP3, USB, microphone * DVD video system with 2 flat-screen monitors * Bluetooth telephony * Navigation system * Navigation display on screens * Xenon headlights * Fog lights * Electrically adjustable and heated exterior mirrors * Reversing camera with washer nozzle * Camera on door 2 * Light sensor * Rain sensor * On-board computer * Tire pressure sensors * Driver's seat with air suspension, 3 air cushions, swiveling, armrests, seat heating & ventilation * Sleeper cabin * Kneeling system * Parking brake, hill start assist * Double glazing * Curtains * Electric front window roller blinds, roller blind for driver's window * 2 electric glass sunroofs * Large luggage compartment * Ski carrier mounting points * Wheel covers All information without guarantee, errors and prior sale are reserved. Viewings possible at any time by prior appointment! Customers who are viewing this ad on Truckscout, please request additional images by email, as this portal is limited to 15 images! Further information: also via WhatsApp Information in Polish: WhatsApp Your French contact: Georges Spengelin

Condition: used, mileage: 806,114 km, power: 260 kW (353.50 HP), first registration: 03/1998, fuel type: diesel, number of seats: 52, gearing type: mechanical, emission class: euro2, color: white, brakes: retarder, Year of construction: 1998, Equipment: ABS, bathroom, parking heater,

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: UC 2109/29604202, power: 55 kW (74.78 HP), rotational speed (max.): 1,500 rpm, input voltage: 415 V, input frequency: 50 Hz, input current: 93 A, type of input current: three-phase, type of cooling: air, protection type (IP code): IP55, Siemens drive motors 55 kW Speed controllable via frequency inverter As-new motors, never used Kdsdpfx Ajx Hizdedqsr

Condition: used, mileage: 211,632 km, power: 103 kW (140.04 HP), first registration: 11/2010, fuel type: diesel, number of seats: 16, gearing type: mechanical, emission class: euro5, color: silver, Year of construction: 2010, Equipment: ABS,

Condition: new, functionality: fully functional, power: 4.8 kW (6.53 HP), fuel type: gasoline, overall weight: 550 kg, maximum load weight: 500 kg, lifting height: 1,020 mm, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, tilting carriage, Mini Track Dumper HT500Y-4 Compact professional dumper with lifting function – now with a special discount! The Mini Track Dumper HT500Y-4 is the ideal solution for construction, gardening and landscaping, agriculture, and work in confined spaces. Thanks to its rubber tracks, hydraulic tipper and powerful lifting function, the dumper is extremely off-road capable, stable and easy to operate. The machine impresses with its compact design, high load capacity and a reliable Briggs & Stratton gasoline engine. Take advantage of our current sales promotion now: Discount on all track dumper models – for a limited time only, while stocks last! The HT500Y-4 is ready for immediate use and offers a strong combination of performance, maneuverability and ease of operation. ⚙️ Technical data Engine & Drive Engine: Briggs & Stratton Engine type: 1-cylinder, OHV, 4-stroke, air-cooled Displacement: 203 cc Power: 6.5 hp at 3600 rpm Fuel: Gasoline Fuel tank capacity: 3.6 liters Performance & Capacity Maximum payload: 500 kg Weight: 550 kg Loading volume of the hopper: 200 dm³ Tilting angle: 100° Tilting system: hydraulic Dimensions Machine dimensions without pedal & hopper: 1570 × 880 × 1450 mm Machine dimensions with foot pedal & hopper: 2050 × 880 × 1450 mm Hopper dimensions: 1050 × 730 × 730 mm Track width: 700 mm Lifting & Height Maximum lifting height: 1020 mm Maximum tipping height: 970 mm Tipping distance: 220 mm Ground clearance: 110 mm Undercarriage Track width: 180 mm Contact area of tracks: 1000 mm Track gauge: 520 mm Turning radius: 1150 mm Speed: 2.88 km/h Climbing ability: 20° Rubber tracks for optimal ground grip ✅ Features & Benefits ✔ Removable protective container ✔ Easy control via operating lever ✔ Folding platform for flexible working ✔ Very compact – ideal for tight construction sites ✔ High stability thanks to track chassis ✔ Low-maintenance gasoline engine ✔ Hydraulic tipping function ✔ Powerful lifting function for comfortable unloading Areas of application Construction & renovation Gardening and landscaping Agriculture Stable & farm work Material transport on difficult terrain Work in confined spaces Condition & Delivery Immediately available New goods / unused, from current production Kdedpfx Asyqxw Iedqer Factory-tested, ready for immediate use Europe-wide delivery by freight forwarder possible 💶 SECURE PRICE ADVANTAGE Special price with discount: 3,100 € net plus VAT. Save now – a better price is possible! Benefit from our attractive offers. An inquiry is worthwhile! Location: Rheda-Wiedenbrück Inspection possible by appointment ➡️ Request now and secure 10% discount on track dumpers!