Used Wf for sale (413)

Condition: new, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, ZWF/W 18 Center Tube, Central Axle Lift Trailer, Tire Size 22.5, Single Dimensions Chassis designed for interchangeable bodies from 7150 to max. mm (symmetrical bodies) Chassis designed for rear-flush mm (with impact buffer) Test lowering heights: ZWF: Vehicle must lower at least +70mm and raise -20mm, WF: +60mm/-20mm, WFS: +60mm/-20mm Axle loads: 18,000 kg (2 x 9,000 kg) Spring center approx. 1300 mm Support load approx. 1000 kg Lowering heights approx. 1120 to max. 1320 mm via air suspension of the trailer and the tractor unit Coupling height (low coupling) approx. 400 mm unladen Ride height unladen approx. 1100 mm 2nd ride height, if axle lift is used, is approx. 40 mm higher (tire lift via axle lift increases the ride height), only if necessary Ground clearance approx. 1070 mm on level ground Chassis No. generally stamped on the side of the longitudinal member, right side, approx. 100 mm from the front E-wheel holder Prepared for E-wheel holder in winch design for 1 E-wheel Front stop, foldable and adjustable for 7150 mm symmetrical interchangeable bodies Support winches 1 set of drop-leg supports at the rear, height-adjustable 1 set of support winches at the front Coupling device Coupling spring travel approx. 1400 mm Intermediate distance 760 mm (with mm interchangeable body) Connection lines for lights/brakes, route lines inside/on the drawbar on the right Storage for connection lines on the side of the drawbar Drawbar rigid (center tube) with bolted drawbar eye Drawbar eye ø 50 mm SMB axle with Haldex/Wabco/Knorr brake and Weweler air suspension selected 2x axle with large disc brake (430, or 4309/4312/4345) 2x axle 9t 22.5 disc brake, single tires for air suspension Bellows plates, rotate at 340-400 lift (not on the bogie, not with SMB) Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Axle distance approx. 1360 mm (with total lift of approx. 300 mm, 340 mm or 400 mm) 2x air suspension, total lift approx. 400 mm 1 coupling head each, red and yellow Test nipple for brake cylinder pressure on the brake cylinder at the front right Air reservoir 2 x approx. 80 l in steel, painted black (1x brakes, 1x lifting and lowering) Lifting and lowering device at the rear left in the direction of travel Tire pressure control, basic version, connected to the CAN bus system of the EBS Brake/ABS EBS brake system, manufacturer Knorr/Wabco/Haldex at our choice, with Roll Stability Program 2x wheel attachment by center centering 4x tires 385/55 R 22.5 instead of 385/65 22.5, brand manufacturer at choice, system on -wheel 11.75 x 22.5 Brand tires 385/55 R 22.5 at choice Spiralflex Spiralflex cables and hoses for light and brake connection to the tractor unit, with mounting plate (standard) 15-pole plug or socket at the front Lighting system 24 Volt with large multi-function lamp Lighting system/wiring system, manufacturer at our choice (closed lighting system) License plate lighting Rear lights (LED) under the rear container support, beam of light to the rear Rear lights (LED) at the very front, under the stop, beam of light to the rear Side marker lights (LED), flashing (all SIDE lights flash), attention! Possible problems with tractor units! 9 (min.)-pole cable as connection front-rear (min.) Position lights (LED) mounted on a separate holder (not attached to the lamp) Position of position lights: Mounted on the underrun protection (if there is a kink to the rear, the UFS will not be pinched) Pjdpfx Aszir Ipsd Sjgr Position light (LED) at the

Condition: new, Year of construction: 2025, The device has 2 cooling systems: - Laser head cooling system - Laser source cooling system Chiller designed for lasers up to 1500 W Designed for cooling tubes in laser plotters thanks to the use of a cooling unit. The chiller maintains the correct working temperature of the laser source, ensuring constant cutting or engraving quality throughout its use. Technical parameters Tank capacity 15L Max. water cycle 70L/min Water head lift 45m Pjdpfx Aov Aipned Sjgr Cooling capacity 5.1kW Refrigerant R-410A Pin diameter 1/2" rp Power 220V (+-10%), 50Hz Weight 72kg Dimensions 700x470x890mm

Condition: used, mileage: 20 km, power: 110 kW (149.56 HP), first registration: 06/2025, fuel type: diesel, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 4, total length: 4,904 mm, total width: 1,904 mm, total height: 1,990 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, * Short wheelbase * Electronic Stability Program (ESP) * Trailer hitch * Speed-sensitive power steering (Servotronic) * Increased initial fuel tank capacity * 16-inch wheels * Leather multifunction steering wheel * Reinforced rear suspension * Additional noise reduction measures in the cab and passenger compartment * Child seat anchorages for ISO FIX child seat system * Narrow, height-adjustable headrests * Manual height adjustment, left front seat * Unpainted door paneling * Three-point automatic seat belts in the front with electric belt pretensioners Pgodpfox Ipffox Ad Ser * Standard roof * Rear tailgate with window * Swivel seat in the cab on the right * Seat in the cab on the left * Double bench seat, left side, with armrest on the aisle side * Standard acoustic package * Seat heating for front seats, individually adjustable * Exhaust system, EU6 AP * External release for rear tailgate/lid * Sliding window in passenger compartment, left side * Heated windshield with thermal protection glass * Childproof lock, electrically operated * Heated rear window with rear window wiper * Central locking with remote control and interior operation * Fixed side window in the cargo/passenger compartment, right side * Automatically dimming interior rearview mirror * Armrests for both front seats * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Glove compartment flap with light * Roof headliner in the cab as a comfort headliner, in the cargo/passenger compartment with hard fiberboard * Side paneling made of hard fiberboard in the cargo area * Approved as a passenger car * Folding grab handles on the roof frame * Sliding door, right side, in the cargo/passenger compartment * Exterior mirror housings and various exterior parts in body color * Front Assist incl. City Emergency Braking for ACC high * Radiator protection grille * Additional dust protection seal on the outside * Entry handle on the A-pillar on the driver and passenger side * Electrically adjustable exterior mirrors, separately heated * Electronic engine immobilizer * Tire pressure monitoring system * Start/Stop system with recuperation * Manually adjustable lumbar support in the front seat backrests * Standard navigation system with media and internet package * Auxiliary heater with remote control and additional heater * Parking assist system, front and rear * Optional infotainment system (MIB3) * LED main headlights with lens * Daytime running lights with automatic driving lights and manual coming home/leaving home function * Windshield wiper intermittent control with light/rain sensor * Automatic dynamic headlight range control (adjusts during driving) * Key for locking system with remote control * 4 speakers (passive) * Automatic distance control (without follow to stop) and speed limiter * LED rear combination lights * Washer fluid level indicator * Standard interior lighting concept in passenger/cargo compartment * Alternator 160-250 A * Step lighting, sliding door(s) * Seat belt warning system, electronic contact in the seat belt buckle * Multifunction display/on-board computer "Color" * Wired & Wireless App-Connect * Phone preparation for mobile phone * 4-cylinder turbocharged diesel engine, 2.0 * Online service, with OCU, with head unit coding, without WFS connection * Driver alertness system * 6-speed manual transmission * Interface for external use * Station wagon * With rear view camera system (version 1) * Air conditioning in the front with el

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 6.000 min/-1 weight 19,5 kg Driven Tool WTO 410105085-50 - Drilling and milling unit - Straight with offset - with Coromant Capto C5 Pedpfx Ajyycwled Segr - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 disc turret DMG CTX gamma VDI50 disc turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline PITTLER PV 630, right-hand turret SAUTER disc turret VDI 50, DIN 5480, right-hand VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN5480 - i (n1:n2): 1:2 - Direction of rotation: unequal - Coolant supply: IK 80 bar - Functional length LF: 160 mm - Cantilever length LPR: 160 mm - Functional width WF: 75 mm

Condition: used, mileage: 10 km, power: 151 kW (205.30 HP), first registration: 08/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 2,250 mm, loading space width: 1,832 mm, loading space height: 1,626 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 5-seater double cab with partition * Exhaust system concept, WLTP3 N1-III, N2//EU6EA * All-wheel drive 4x4 * 8-speed automatic transmission for 4x4 * 4-cylinder turbo diesel engine, 2.0 l / 130 kW (4V) BIT * Start-stop system with brake energy recuperation * One towing eye at the front * Preparation for trailer hitch (incl. trailer stabilization) * Fuel tank 75 l * Differential lock * Approved as 3.5t * Front axle, reinforced (2,100 kg load capacity) * Permissible total weight 3,500 kg * 4 light alloy wheels 6 1/2 J x 17, with 1,200 kg load capacity, in black * Tires 235/60 R 17 C 117/115 R, optimized for rolling resistance * Summer tires * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and KFG 1 with ABS programming * Climatronic air conditioning in the cab * Daytime running lights with automatic assist lights, coming and leaving home function * LED headlights with LED daytime running lights * LED interior lighting concept in passenger/cargo compartment * Fog lights incl. cornering lights * Lateral marker lights * With headlight cleaning system, with washer fluid level indicator, with heated windshield washer nozzles at the front * Step lighting * Exterior mirrors, electrically adjustable, heated and foldable * Exterior mirrors left and right, convex, with integrated LED turn signal and wide-angle view * Normal roof * Entry handles on the rear pillars * Radiator grille, black with chrome trim * Rear wing doors with enlarged opening angle * Windshield wiper intermittent switch with light and rain sensor * Sliding door, right, in the cargo/passenger compartment * Laminated windshield with heat-insulating glazing, heated * Front bumper in gray with painted trim in vehicle color * Airbag for driver and front passenger with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling to the side * Electronic parking brake * Premium interior noise reduction measures * Glove compartment with lockable flap, illuminated * Leather multifunction steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders * Three-point automatic seatbelts with seatbelt height adjustment and electric belt tensioners at the front * 12-V sockets in the cab * Seatbelt warning, E-contact in the seatbelt lock * 2 remote control folding keys * Keyless Go with safe lock * Auxiliary water heater, programmable, with remote control * Chrome package * Suspension seat 'ergoActive' left * Suspension seat 'ergoActive' right * Seat covers in fabric 'Toronto Grid' * Seat heating, separately adjustable on the driver's side * Digital instrument cluster * Tire pressure monitoring indicator * External, USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * Navigation system (Baseline) * MAN Media Van Navigation Business * Digital radio reception (DAB+) Pgsdpfxezp A E Se Ad Ser * MAN Media Van Navigation Business package * Wired & Wireless App-Connect * Online service, with OCU, with head unit * Coding, without WFS connection * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assist * Electronic stability program (ESP) and ABS with electric differential lock * Park steering assist * ACC Stop & Go * Traffic sign recognition * Rear view camera system with dynamic guide lines * High beam assistant 'Light Assist' * Driver fatigue detection * Lane change assist * Side wind assist * B

Condition: ready for operation (used), Year of construction: 2010, Various sewing machines are available: 1) 1-needle flatbed sewing machine Adler, year of manufacture: 2010. 2) Fitted sheet overlock machine Pfaff with elastic and 2-needle flatbed, year of manufacture: 2010. 3) 1-needle flatbed sewing machine Global WF 1515 AUT, year of manufacture: 2010. 4) 2-needle flatbed sewing machine Pfaff 1446 for gathering, year of manufacture: 2010. 5) 1-needle flatbed sewing machine Pfaff 1425, year of manufacture: 2010. 6) 2-needle flatbed sewing machine Sewmaq SW898h-7 with conversion option for double stitch or normal stitch, year of manufacture: 2010. 7) Welting machine Adler 204-4102 S, year of manufacture: 2010. 8) 2-needle flatbed sewing machine Pfaff 1422 for zippers, year of manufacture: 2010. 9) 2-needle post-bed sewing machine Global LP 9226 LH-5NB with double stitch, year of manufacture: 2010. 10) 1-needle flatbed sewing machine Pfaff 1425, year of manufacture: 2010. 11) 5-needle overlock machine Textima 8510 for fitted sheets, year of manufacture: 2010. 12) 1-needle flatbed sewing machine Pfaff 1425, year of manufacture: 2010. 13) 1-needle flatbed sewing machine Pfaff 1425, year of manufacture: 2010. 14) 1-needle flatbed sewing machine Pfaff 1425, year of manufacture: 2010. 15) 1-needle flatbed sewing machine Global WF 1515 AUT, year of manufacture: 2010. 16) 1-needle post-bed sewing machine Global WF 1515 AUT, year of manufacture: 2010. 17) 2-needle post-bed sewing machine Fomax KDD 8420 H-3 with double stitch, year of manufacture: 2010. 18) 1-needle zigzag sewing machine Minerva 335-111, year of manufacture: 2010. Podetzdfqepfx Ad Sogr

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/1990, loading space length: 6,700 mm, loading space width: 2,500 mm, total length: 9,510 mm, total width: 2,500 mm, suspension: steel, tire size: 275/70 R22.5, wheelbase: 4,860 mm, color: other, Year of construction: 1990, Axle configuration Tyre size: 275/70 R22.5 Brakes: drum brakes Suspension: leaf suspension Rear axle 1: Double wheels; Max. axle load: 10000 kg; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 2: Double wheels; Max. axle load: 9000 kg; Tyre profile left inner: 60%; Tyre profile left outer: 60%; Tyre profile right outer: 60%; Tyre profile right outer: 60% Rear axle 3: Double wheels; Max. axle load: 9000 kg; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Weights Empty weight: 5.780 kg Carrying capacity: 22.220 kg GVW: 28.000 kg Pgodpfeyab Unex Ad Ssr Functional Height of cargo floor: 125 cm Tipper: Back Condition Technical condition: very good Visual appearance: very good Identification Registration number: WF-81-GL = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 25 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,400 mm, total height: 2,000 mm, total length: 1,500 mm, working range: 280 mm, height adjustment type: electric, scan area length: 280 mm, scan area width: 280 mm, travel distance X-axis: 600 mm, travel distance Z-axis: 400 mm, table length: 1,000 mm, table width: 1,000 mm, space requirement width: 1,400 mm, space requirement height: 2,000 mm, laser wavelength: 1,070 nm, space requirement length: 1,500 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 280 mm, Equipment: cabin, Automated Fiber Laser System with SK-LASER Workstation and Rotary Table for Series Production. Laser Class 1 · CE · Made in Germany System: - Complete system: fiber laser + workstation + rotary table - 2 processing positions with partition wall (400 mm) - Operator protection via light curtain - 2-cycle operation, 180° rotation Equipment: - Workstation XXL: W 1,400 × H 2,000 × D 1,500 mm - Option: High-speed scan head Superscan Rotary Table & Axes: - Rotary table Ø 1,000 mm, 25 mm hole grid - Automatic production cycle - 2 × Z-axis 400 mm, 1 × X-axis 600 mm - Ball screw drive, load capacity up to 25 kg Laser – IPG: - 50 W, 1.0 mJ - 50–250 kHz, 100 ns - 1060–1070 nm, M² < 1.2 - Air-cooled, < 400 W Optics: - F-Theta f = 420 mm - Field approx. 280 × 280 mm - Pilot laser + distance laser Control System: - Windows 11 Pro, SSD, 23" monitor - Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR/DM, serial numbers, material parameters Pgsdpfx Aoyil Dvsd Sjr Workstation: - Seated/standing workstation - Extraction nozzle DN50 - Emergency stop, dual-channel interlock, safety relay Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE-compliant · Made in Germany

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 940 mm, total length: 1,760 mm, door opening width: 670 mm, door opening height: 500 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, space requirement width: 920 mm, space requirement height: 940 mm, laser wavelength: 1,070 nm, space requirement length: 1,760 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Fiber Laser System for Professional Marking and Engraving of Metals and Plastics. Equipped with SK-LASER Workstation, Laser Class 1, and automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Access protection via safety control Laser – IPG (Made in Germany): - Power: 20 W - Pulse energy: 1.0 mJ - Pulse duration: 100 ns - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 Pgodpfxjyimpaj Ad Ser - Air-cooled, < 400 W Optics & Scanner: - F-Theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum housing - Work surface 710 × 400 mm, 25 mm hole grid - Dimensions 1760 × 920 × 940 mm Motorized Z-Axis (400 mm) - Extraction port DN50 - Safety (PL4) - Emergency stop - 2-channel interlock Safety relay - Rear service door (when open: Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine - CE · Made in Germany

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Pgjdpfx Asl Dvx Eed Ssr Coolant

Year of construction: 1991, condition: good (used), Hermle UWF 802 M machining center with Hermle HS control system. The machine is in good working order and ready for demonstration. Pedjdubmkepfx Ad Ssgr

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 5 h, power: 5 kW (6.80 HP), input voltage: 400 V, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, table width: 530 mm, table length: 1,200 mm, overall weight: 510 kg, tool diameter: 240 mm, Equipment: CE marking, Professional woodworking machine with tilting milling spindle and cantilever arm. Exhibition machine like new - used only for demonstration purposes Milling unit made from cast iron, tiltable up to -45° backwards Four milling speeds from 3500 to 10000 rpm Podpsyn Ny Ujfx Ad Ssgr Forward and reverse rotation Height and tilt display accurate to 0.1 mm Quick speed change via eccentric clamping Powerful 5.0 kW industrial motor Curved milling hood included Made in Italy Milling spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Speed indication via LED display on the front panel Spindle shaft diameter 30 mm Max. tool diameter 240 mm Max. retractable tool diameter 230 mm Max. tenoning tool diameter 320 mm Accessories included: Mitre fence with two flip stops Eccentric clamp Curved milling safety guard Additionally, adjustable system fence jaws The machine can be inspected and tested at any time at the Chemnitz location.

Condition: used, mileage: 113,879 km, power: 103 kW (140.04 HP), first registration: 08/2022, fuel type: diesel, overall weight: 3,000 kg, axle configuration: 2 axles, fuel: diesel, energy efficiency: D, CO₂ emissions: 204 g/km, fuel consumption (urban): 7.8 l/100km, fuel consumption (extra-urban): 7.8 l/100km, fuel consumption (combined): 7.8 l/100km, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 9, total width: 2,050 mm, total height: 2,254 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, traction control, MSSA start/stop system, AIR airbag driver's side, FA01 brake assist, AUSP exterior mirrors electrically adjustable and heated, FA25 rear-view camera, KLIM air conditioning, MP3A USB connection, 25010 USB charging port, 25903 TPMS (tire pressure monitoring system), 26801 air bag, 26802 air bag passenger, 26911 air bag passenger, ABS anti-lock braking system (ABS), ASR traction control system (ASR), FA16 driver assistance system: hill start assist, ESP electronic stability program (ESP), 42938 driver assistance system: adaptive load control (LAC), 23485 windows in the cargo/passenger compartment: - passenger/cargo compartment glazed, FH2 electric windows front, SG6 6-speed transmission, 36002 rear double doors with glazing, 22800 heated rear window, 34715 upholstered headrests, 79692 heated crankcase ventilation, 69500 steering column (steering wheel) adjustable, 250 model upgrade, RDK tire pressure monitoring system, DPF diesel particulate filter, 77274 low emissions according to Euro 6d emission standard, 36208 sliding door cargo/passenger compartment right with glazing, 32091 seats in the driver's cab: driver's seat with armrest and lumbar support, WFS immobilizer (electronic), ZV central locking with remote control, 27104 storage compartment in the headliner of the driver's cab, 27120 storage compartments: luggage net on the rear doors, AIR1 airbag passenger side, 26081 dashboard Techno, 25628 infotainment system with 7" touchscreen, DAB, Bluetooth interface and Apple CarPlay / Android Auto, 1621 comfort package, TEMP speed control system (cruise control) incl. speed limiter, 39898 inductive charging. We will gladly calculate an individual financing or leasing offer for you and accept your used vehicle in trade. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age / mileage, touch-up paintwork was carried out on the vehicle as part of the preparation. No liability for printing and spelling errors. Errors and prior sale reserved... more on our website. Pedpozpxmrjfx Ad Segr

Condition: used, mileage: 33,298 km, power: 130 kW (176.75 HP), first registration: 09/2025, fuel type: diesel, color: white, gearing type: mechanical, number of seats: 6, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * 5-year manufacturer's warranty for Germany, starting from the initial registration * Trailer hitch included * 6-seater double cab with partition * Approved as a 3.5-ton vehicle * Permissible total weight * Electronic Stability Program (ESP) * One towing eye in the front * Disc brakes in the front * Multifunction steering wheel * Partition with fixed window * LNFZ version * Three-point automatic seat belts in the front with electric belt pretensioner * High roof in vehicle color * Double bench seat in the driver's cabin on the right * Seat in the driver's cabin on the left * Extended interior noise damping * Seat heating for front seats, separately adjustable * Windshield, heat-protection glass * Central locking "Keyless-Go" without safe lock * Dashboard with special attachments * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Exhaust system, WLTP3 N1-III, N2//EU6EA * Rubber floor covering in the driver's cabin * Wooden floor in the cargo area * Approved as a truck * Sliding door on the right in the cargo/passenger compartment * Exterior mirror on the right, convex plus wide-angle * Exterior mirror on the left, convex plus wide-angle * Hinges for rear doors with enlarged opening angle * Lashing eyes for securing cargo * Lane keeping assist * C-rails, side and partition * Interior grab handle (entry at partition) * Exterior mirrors, electrically adjustable, separately heated * Engine immobilizer, electronic * Entry handles on the rear pillar, left and right * Tire pressure control, frequency 433 MHz High * Park steering assistant * Optional infotainment system (MIB3 MP) version 1 * Halogen twin headlights * Front Assist with warning and braking on vehicles, pedestrians and cyclists * Windshield wiper intermittent operation with light/rain sensor * Key for locking system with remote control * 4 loudspeakers (passive) * Cruise control system (ACC) electronic * Daytime running lights with assist driving lights * LED interior lighting concept in the passenger/cargo compartment * Preparation for Smart TCO * Seatbelt control, E-contact in seatbelt lock * Wired & Wireless App-Connect * Operating voltage 12 V * Comfort telephony, without external antenna connection * 4-cylinder turbo diesel engine 2.0 L/130 kW (4V) TDI * Online service, with OCU, with head unit coding, without WFS connection * Driver alertness and fatigue detection * With socket in the front * 6-speed manual transmission * Preparation for alcohol interlock * Preparation for interface for external use, with electrical terminal block * Battery 520A (92Ah) * With rear view camera system (version 2) * Air conditioning with electronic control * With side wind assist * With predictive speed limiter (pLIM) * Seat covers in fabric * With UNECE CS&SU * Pan-European eCall * Basic assistance package including "Intelligent Speed Assist" and cruise control system * Professional assistance package including park steering assistant & parking assist in the front and rear area including side protection Podpfx Adszv A Hve Ssgr * With multifunction camera * Heat protection glazing * With traffic sign recognition * Digital radio reception * Cw-value cladding * Prepared for VW Connect and VW Connect Plus * 4-cylinder diesel engine 2.0L aggregate 03N.G * External, USB Type-C data and charging port(s) with increased charging power * Hill start assist * Parking brake * Front axle "Standard" * Navigation system Discover Media with 26 cm (10.4") touch color display with

Year of construction: 1990, condition: used, LIQUIDATION SALE – IMMEDIATE AVAILABILITY Due to the closure of the production facility, we offer for sale a complete used technological line for the production of ceramic products, consisting mainly of HANDLE and KELLER equipment. Complete production line price: EUR 400.000 net, EXW, negotiable. To facilitate a quick sale, we also offer: • the complete production line, • individual production sections, • individual machines and equipment. Prices for individual machines are available upon request. Reasonable offers will be considered. Preference will be given to buyers able to complete the transaction and collect the equipment quickly. The line consists of the following machines and equipment: 1. Raw material pre-processing section Pjdpfx Ajy Nzprod Segr • HANDLE R469 edge runner, year of manufacture 1955 • AGW 1065/1085 roller crusher, year of manufacture 1963 • WF 1080A roller crusher, year of manufacture 2005 • Belt conveyors – 4 units • Control cabinet 2. Forming section • HANDLE MDVG 920B mixer, year of manufacture 1990 • HANDLE PZG 56A/50 extrusion press, year of manufacture 1990 • KELLER type 4155 cutter, year of manufacture 1990 • Belt conveyors – 4 units • Control cabinet The equipment is characterized by robust construction, durability and straightforward maintenance. The production line was in continuous operation until the end of 2025 and is available for inspection at the plant in Panoszów, Poland. The machines are available immediately. Quick completion of the transaction and prompt collection are preferred. Please specify in your inquiry whether you are interested in the complete line, a production section or a particular machine. Additional technical information, photographs and individual prices are available upon request.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 950 mm, spindle diameter: 128 mm, controller model: HEIDENHAIN iTNC530, The machine was overhauled and modernized in 2005. Repairs were carried out in 2025. The following work was performed: - Cleaning of the machine - Overhaul and adjustment of machine geometry - Overhaul of machine functionality - Overhaul of electrical equipment - Overhaul of hydraulics and lubrication - Backlash compensation and drive optimization - Replacement of guideway wipers - Repair of the telescopic cover - Overhaul of the CHOV-K 10 bar tool cooling system - Overhaul of the AVN40 tool changer TECHNICAL DETAILS Main spindle diameter: 128.57 mm Tool holder: ISO 50 Spindle speed range: 5,000 rpm Travel X-axis: 1,600 mm Travel Y-axis: 920 mm Travel Z-axis: 950 mm Clamping surface of table: 850 x 850 mm (850 x 1,600 mm including additional supports) Table load capacity: 3,000 kg Pgodpfxoy Edl Ue Ad Sjr MACHINE DETAILS Control: HEIDENHAIN iTNC530 EQUIPMENT - Handwheel - SIEMENS motors and drives - CNC table - full B-axis control - CHOV-K 10 bar - through-spindle cooling – emulsion - ATC40 - automatic tool changer - Operator console protected against chips and coolant - Workpiece cover

Condition: new, Year of construction: 2026, functionality: fully functional, fuel type: electric, drive type: Elektro, Industrial vacuum cleaner Condition: New appliance Technical condition: New Pgedpfjwiknwjx Ad Ssr Description: Water fire department vacuum cleaner with built-in pump for continuous operation, discharge via C-hose.

Condition: excellent (used), functionality: fully functional, Universal milling machine Hermle UWF 802M with HS 401 path control GREAT CONDITION!! Technical data: >> Year of manufacture approx. 1995 Machine no. 10212 >> Rigid angle table >> Speed: 17 to 3550 rpm >> Feed continuously variable in 3 axes from 0 to 1600 mm/min >> Drive power: 6 KW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Dimensions length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: >> HS 401 line control Pedpjv Ed U Dofx Ad Ssgr >> Hydraulic tension vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples About the machine : A Hermle UWF 802M tool milling machine with HS401 path control is on offer. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No major CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle was mechanically and electrically tested by us. Take the opportunity to view and try out the Hermle on site under power.

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, Additional information Frame Steel welded construction made of fine-grain steel, hot-dip galvanized, flat platform without edge rim, slope of the loading area towards the rear axle by approx. 8° downwards. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with NIRO sheet metal at the bend as a rope guide - flush with the floor. For trucks with wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm Tow hitch Tow hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrical system with 7-pole socket Accessories/Modifications 2 holders for wheel chocks, aluminum side underrun protection, foldable - These are taken over from the truck! Steel underrun protection, quarter-shell fenders with mud flaps - These are taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock 1 holder for 3 pieces of gasoline canisters 1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, including locking mechanism, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing sleeves on the back Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front wall switched via parking lights with switch on the front wall outside on the driver's side, 1 LED work light, at the rear, with integrated reversing camera including color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage divider 24/12V, 1 7-pole 12V socket = adapter Floor Mega Grip made of interlocking galvanized grating, steel grating 50/4 including with a mesh size of 50 mm. Top side with anti-slip interlocking, continuously laid over the entire main frame platform Tie-down eyes 12 pairs of tie-down eyes in the outer frame, freely pivotable - each 10 tons. Pgsdpfjk Unitjx Ad Sor 1 at the very front and the last one at the very rear. 1 tie-down eye at the very rear in the middle for attaching the winch cable 12 tie-down eyes recessed in the center of the floor, each 5 tons. Front wall Front wall made of steel sheet, height 1,500 mm. Fixed with corner pillars at the front wall height. Each 2 x 12 mounting brackets for lashing chains mounted on the left and right on the front wall Winch Electric winch, 24 volts, pulling force approx. 6,350 kg, mounted in the center on the front wall (recessed with loading bridge), operated with a wireless remote control, rope length min. 35 m x 9.5 mm, with rope window, with rope pressure plate, including overload protection, rope free-running clutch, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating manual Ramps Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also when loading with ramps), electro-hydraulically foldable and laterally adjustable - including electro-hydraulic pump unit. Ramp angle approx. 8° with lowered rear axle Ramp surface made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support le

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Hermle UWF 802M with HS 401 Contour Control – Excellent Condition!! Technical Data: - Year of manufacture: approx. 1994, Machine No. 10525 - Fixed angle table - Spindle speed: 17 to 3550 rpm - Infinitely variable feed in 3 axes from 0 to 1600 mm/min - Drive output: 6 kW - Travel X/Y/Z: 500/430/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight: approx. 1,800 kg - Dimensions (LxWxH): 1.8 m x 1.8 m x 1.9 m Podsw Sv Iaspfx Ad Sogr Accessories and Equipment: - HS 401 contour control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples About the Machine: For sale is a Hermle UWF 802M tool milling machine with HS401 contour control. This universal milling machine is in excellent condition. The contour control is very easy to operate, allowing for length and radius compensation within the program. No advanced CNC knowledge is required. Of course, the Hermle can also be operated manually without the control system. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very simple by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically inspected by us. Take the opportunity to view and test the Hermle under power at our premises.

Condition: excellent (used), Water evaporator heat exchanger Pjdpfxsxxccpo Ad Segr

Condition: ready for operation (used), functionality: fully functional, The Lieder AWF Filling Machine is a cutting-edge solution for professionals looking to automate the filling of liquid or semi-solid food products. This machine is specially designed to offer high dosing accuracy while maintaining a high throughput. Thanks to its robust stainless steel structure, it guarantees optimal compliance with hygiene standards and ease of daily maintenance. Furthermore, the Lieder AWF easily adapts to various product types, whether thick sauces, purées, compotes, or products containing small pieces. This allows you to diversify your offering while maintaining consistent filling quality. Furthermore, its quick adjustment systems facilitate format changeovers and significantly reduce production downtime. Furthermore, the intuitive interface allows operators to quickly learn how to operate the machine, improving productivity while reducing the risk of error. The integrated conveyor system and specific dosing nozzles ensure a smooth flow without splashing or product loss. Finally, the dosing machine's compact design allows for easy integration into your existing lines, increasing your competitiveness without requiring major investments. Don't wait any longer to optimize your packaging line! Contact us to learn more about the tangible benefits of the Lieder AWF dosing machine. Technical specifications: Dosing capacity: up to 80 strokes/minute Dosing volume: 10 to 500 ml Structure: entirely made of stainless steel Power supply: 400 V, 50 Hz Quick format changeover Pgsdewf E A Uspfx Ad Sjr Wy2qjnEE

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, The angle conveyor from M-Fördertechnik is available for sale; features cycle control. Speed: 4 m/min. Infeed height: 1700 mm. Inclined belt: 1200 mm. Usable width: 300 mm. Total width: 450 mm. Mobile. Cleat height: 50 mm, every 520 mm. Pjdpfoyntxzex Ad Sogr

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser hours: 6,900 h, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, power: 10 kW (13.60 HP), year of last overhaul: 2024, working range: 4,020 mm, Equipment: cooling unit, documentation/manual, safety light barrier, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • Powerful Donaldson DFPRO 6 filter system with 7.5 kW Technical specifications: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Transverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Acceleration Z-axis: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Pjdpfx Aevw Tdljd Sjgr Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% EX-TRABEAM® Pro laser cutting head Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical specifications: Drilling from/to: Ø 4 mm - Ø 30 mm Threading from/to: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic drilling tool measurement Pneumatic hold-down device Brush For removing drilling chips Donaldson® DFPRO 6 Cyclopeel filter system Fan power: 7.5 kW Flow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With witt Gas Mixer Machine has always been operated under a maintenance and support contract

Year of construction: 2026, condition: new, Machine fills packages automatically. Just insert the bag or pouch into the Bag in Box filler and pull the handle. After the package is filled, return the filling handle into start position and cap the bag. Capacity – 250 pcs. of 3 L bags/h Perfect for filling various liquids: from juice, wine, milk to broth, oil, soap, etc. Fills Bag in Box bags in sizes 1–30 L, Stand up Pouch packages in sizes 0,75–5 L. Suitable for both hot and cold filling. Machine fills both Bag in Box and Stand up Pouch packages with a tap. The filler can have an optional detachable buffer tank for hot filling. It is mounted conveniently on the side of the machine for better inspection and easier washing process. The buffer tank also reduces liquid foaming during hot filling process. The buffer tank has an integrated liquid level control inside for regulation of overspill and level in the tank. Buffer tank also comes with a connection to our pasteurizer. Pgedpfoflriusx Ad Ser Error of volume repeatability is just ± 0,5 %. The filler pre-vacuums the bags and pouches before filling. Comes with touchscreen panel and multi-language menu. Easy-to-adjust filling table allows easily fill different volumes of Bag in Box & Stand up Pouch packages. Working surface of the table consists of conveyor rollers which are easy to clean and help for the smooth slide of the bags and pouches. The filler is easy to clean after work with external and CIP cleaning. Our Bag in Box fillers work in perfect synergy with our Pasteurizers HEAT. They have a special connection between them which prevents liquid from overflowing and ensures easy work. We also offer fully automatic Bag in Box filler AUTOFLOW.