Used Waste Grinder for sale (4,755)

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Rcodpfjxvc Rzox Ac Tjf Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: used, functionality: fully functional, Grinder for mincing meat Manufacturer: Sind Voltage: 380V / 50Hz Rcedpfxexrhbds Ac Tef Power: 11kW Size: 1250x800x1110mm Weight: 319kg

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, TECHNICAL SPECIFICATIONS, MODEL RTR 600 CN Table diameter mm: 600 Electromagnetic chuck diameter mm: 600 Cross travel mm: 350 Max. grinding height with new grinding wheel mm: 400 Table speed, continuously adjustable rpm: 1-200 Gripping wheel dimensions mm: 400 x 50 x 127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power kW: 15 Max. load on table kg: 1,000 Net weight approx. kg: 5,200 Vertical movement is achieved on linear slides and is driven by a precision ball screw and a YASKAWA AC motor. Vertical axis resolution: 0.001 mm. Measuring system = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Transverse movement is performed on linear slides and is controlled by a precision ball screw and a YASKAWA AC motor. Transverse movement is performed by the grinding wheel head mounted on the cross slide. Transverse axis resolution = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Rotary table with hydrostatic circular slides. Infinitely variable rotation speed, with YASKAWA AC drive motor. Balanced hardened steel spindle with 15 kW motor. Fixed speed. Option: YASKAWA frequency converter for continuously variable spindle speed (1,100–1,900 rpm) Lubrication unit with automatic lubrication cycle, external to the machine, without initial filling. Standard accessories: - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, flash grinding - Digital measurement of the vertical and transverse axes. Resolution = 0.001 mm - Electronic handwheel for manual axis movement - Continuously variable table speed via YASKAWA AC motor. Rotary table with hydrostatic slides - Grinding wheel headstock with 15 kW motor. Fixed spindle speed: 1,450 rpm. - Central lubrication for all moving parts Rcodjx N I Alspfx Ac Tef - Hydraulic unit located outside the machine - Complete watering system with piping, electric pump, guards, electrical equipment, and a 250-liter settling tank (without filter) - Complete enclosure of the work area with sliding door (open ceiling) - 1 complete flange with grinding wheel - Work light - 1 set of service wrenches - CE Declaration of Conformity + CE plate - Operating voltage 400 V +/- 5%, 50 Hz - Electro-permanent magnetic plate with electronic device for adjusting the attraction force. WAGNER brand, type EP 360 - Ø 600mm - YASKAWA frequency converter for continuous adjustment of the grinding wheel speed (1,100-1,900 rpm) and for braking at the end of the cycle - LOSMA paper filter, type DTE 100 (capacity 300 liters) - LOSMA wet fume extractor, type AS1 (capacity 1,300 m³/h) - "MARPOSS" dynamic grinding wheel balancing device for dynamic and automatic balancing of the rotating grinding wheel - Linear diamond holder mounted on the grinding wheel headstock. Automatic dressing cycle with automatic grinding wheel wear compensation. Diamond increment by AC motor. Resolution 0.001 mm - 1 Diamond - Complete auxiliary pump for washing parts and the magnetic platen

Condition: refurbished (used), Year of construction: 2009, TECHNICAL SPECIFICATIONS, MODEL T 60.35 CN Rawable length mm: 600 Rawable width with grinding wheel width mm: 390 Rawable height with new grinding wheel (on magnetic chuck) mm: 400 Magnetic chuck surface mm: 600x300 Longitudinal travel mm: 750 Transverse travel of the carriage under the table mm: 350 Adjustable table speed m/min: 1-30 Gripping wheel dimensions mm: 400x40x127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power: 7.5 kW Hydraulic pump motor power: 2.2 kW Net machine weight: 3,000 kg - Vertical movement of the grinding wheel headstock The vertical movement is performed on linear needle slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Vertical axis resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Dimension readout on the display. Display resolution: 0.001 mm. Electronic handwheel for manual movement. - Transverse movement The transverse movement is performed on hydrostatic slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Dimension readout on the display. Display resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Electronic handwheel for manual movement. - Longitudinal table movement Two hydraulic cylinders and a hydraulic unit located outside the machine control the table movement. Rotation speed is continuously adjustable from 1 to 30 m/min. - Lubrication Located outside the machine, this system controls the table movement and the lubrication of all moving parts. Rjdpfsx N I Arox Ac Tecf ACCESSORIES - LODI CNC type T 2020W with 12.1" graphic display (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, and polishing - Visualization to the thousandth of a millimeter of vertical and transverse axis movements - Electronic handwheel for manual axis movement - Coolant system with paper filter and high-pressure pump - Mist extractor (capacity 2,400 m³/h) - Electro-permanent magnetic plate, dimensions 600 x 300 mm - Hydraulic dressing device above the head with CNC-programmable automatic dressing operation and automatic grinding wheel wear compensation. - YASKAWA frequency converter for continuous adjustment of grinding wheel speed and for accelerating braking at rest. - Grinding wheel flange with balancing shaft - Complete work area enclosure - Work light

Condition: used, Round workpiece grinder Manufacturer: BRUSA & GARBOLI Country of manufacture: Italy Model: LT 130 - BRUSA DI GARBOLI Year: 2023 Technical parameters: min. diameter (with special feed rollers): 10 mm max. diameter 127 mm Rcsdpfxjxdivaj Ac Tof min. - max. length 680 - 6000 mm sanding belt size 2000 x 120 mm disk motor power 2.2 kw sanding belt motor power 5.5 kw feed motor power 0.25 kw feed speed 1 - 20 m/min weight 760 kg dimensions 160 x 13 5x 170 cm electrical connection 400V / 50Hz feed system self-centering feed speed regulation frequency sanding belts 1 set Adjustment tools 1 set Instruction manual 1 set CE certificate of conformity Optional equipment: PLC control unit “Keyence” photocell, control of opening/closing of the grinding belts Outgoing workpiece feed rollers with drive

Condition: used, Price: On request - Documentation available: No Rcodpfxow Sk Dvo Ac Tof - CE certificate present: No - Drive system: Conventional - Distance between centres [mm]: 1000 - Centre height [mm]: 135 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Working width: 300mm Working height: 2.5-150mm 4 sanding units 2x lower unit, 2x 5.5kW, rubber sanding pads Redjy Sxxvopfx Ac Tecf 2x upper unit, 2x 5.5kW, rubber sanding pads Sweeping brush (top and bottom) Adjustable feed rate via inverter, 4-16 m/min Electric height adjustment for sanding CE certification Year of manufacture: 2009

Condition: used, Professional meat grinder Duker Rex is designed for fast and efficient grinding of fresh and slightly frozen products with high capacity and reliable performance. This model is equipped with an automatic feeding worm system that enables continuous and even product transfer to the grinding unit, ensuring stable operation and high productivity. The large 120 liter hopper allows processing of bigger product quantities without frequent refilling, while the production capacity of up to 2000 kg/h makes this machine an excellent solution for intensive professional use. It is suitable for processing meat, poultry, fish, vegetables and other food products. The model uses the Unger cutting system with a 130 mm plate diameter, ensuring precise and high-quality grinding with a uniform final product texture. Stainless steel construction provides long service life, high hygiene standards and easy maintenance. Robust industrial design, powerful 11 kW motor and stable construction guarantee safe and reliable operation in demanding working conditions. Technical specifications: Machine type: Meat grinder Manufacturer: Duker Rex Capacity: up to 2000 kg/h Hopper capacity: 120 L Power: 11 kW Voltage: 400 V / 3+N Frequency: 50 Hz Cutting system: Unger Plate diameter: 130 mm Loading height: 1300 mm Redpfx Acey Izlko Tscf Output height: 680 mm Dimensions: 800 x 1200 x 1370 mm Net weight: 674 kg Material: Stainless steel Operation: Stable, powerful and reliable Maintenance: Easy and simple

Condition: new, Walter Technic Compressor Rcsdpfxey Nlwte Ac Tsf Model: SKTG 5.5 PP Kombo Dryer, Automatic condensate drain, Tank: 500 litres, Pressure: 10 bar, Capacity: 700 litres per minute, Weight: 505 kg.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1800005039, travel distance X-axis: 360 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 240 mm, controller model: NUM 1050, swivel angle B-axis (max.): 120 °, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with grinding and eroding functions. The machine was refurbished in 2016. The latest service report for the machine is enclosed. Optionally, a variety of spare parts can also be purchased in addition to the machine. TECHNICAL DETAILS Travel range X-axis: 360 mm Travel range Y-axis: 240 mm Travel range Z-axis: 240 mm Swivel axis B: ±120° Resolution transverse axis X: 0.0001 mm Resolution feed axis Z: 0.0001 mm Redpfxozb Dtps Ac Tecf Resolution vertical axis Y: 0.0001 mm Resolution swivel axis B: 0.0001° Rapid traverse transverse axis X: 10 m/min Rapid traverse feed axis Z: 10 m/min Rapid traverse vertical axis Y: 10 m/min Rapid traverse swivel axis B: 6,500°/min MACHINE DETAILS Control: NUM 1050 Connection power without robot: 13 kVA Compressed air supply: 6 bar Compressed air connection diameter: 11 mm Operating hours (according to counter): 4,550 h EQUIPMENT Electrostatic filter system Documentation Note: The machine has contamination (oil stain) on the glass level gauge. Therefore, a complete on-site test is currently not possible.

Condition: excellent (used), functionality: fully functional, - Manual table adjustment - Manual belt angle adjustment - Belt width: 15 cm - Table width: 45 cm - Table length: 92 cm - Feed speed: 3.7/22 m/min - Motor power: 2.2 kW - 400 V - Year: 2002 Redpfx Acey N N Ntj Tjcf

Year of construction: 2022, operating hours: 2,500 h, condition: like new (used), functionality: fully functional, Waste Recovery and Sorting Line – Year 2022 Complete line for the recovery and sorting of municipal and industrial waste, manufactured and installed in 2022, with very few operating hours and in very good overall condition. Rodpfjy Snntjx Ac Tocf The installation is equipped with leading European brands, including: • PICVISA – ECOPACK EP-2000 and EP-1500 optical separators • NIHOT – WSF 800 and SDS 800 air density separation systems • SPALECK – Vibratory screen • GUNTER – SPLITTER UNIT 425 screening and separation • SPR – 1-rotor Pre-crusher shredder • FELEMAMG – Magnetic and inductive separators • ATLAS COPCO – GA37 VSD FF compressor • Large number of conveyor belts and feeding/storage silos Approximate operating hours range from 1,000 to 2,500 per unit, with the majority of components maintaining excellent operational condition. The facility can be purchased: • As a complete line, • As separate sections, • As individual units. This is a modern facility, equipped with high-performance optical sorting and air density separation technology, specifically suited for: • MSW (Municipal Solid Waste), • Packaging, • RDF/SRF, • Plastics, • Film, • Paper, and light waste recovery.

Condition: used, KELLENBERGER KEL‑VARIA R175 x 1500 is a CNC cylindrical grinder engineered for precision, high accuracy and reliable operation. Capacity: centre height 175 mm, distance between centres 1500 mm, Z 1650 mm, max 150 kg; wheels Ø500×80 mm (Ø400×63 mm option). Specs: wheel speeds 1000–2150 rpm, peripheral 45 m/s, max travel 320 mm, feed 7500 mm/min, motors 7.5/2 kW, rapid 15 m/min, 3×400 V, weight ≈6000 kg, dims 4700×2300×2000 mm. Equipment: paper/coolant filtration, MOVOMATIC, Renishaw LP2H probe, wheel flange extractor, remote hand control, MPM balancing. Achieves tight tolerances; suited to automotive, watchmaking, machine tools, aerospace and medical. Rcedpfx Aeyxn A Rjc Tef

Condition: ready for operation (used), Indumasch Siegen 362 Grinding Pedestal Belt Grinding Machine Grinder -Belt width: 150 mm -Speed: 1400 / 2800 rpm 220V / 380V -Extraction unit You are welcome to arrange an inspection appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Rjdpfxeyyn A He Ac Tocf Subject to prior sale. Visit our shop to see our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations in technical data or errors in the item description may occur and are reserved.

Condition: excellent (used), Precision grinder for cutting ejectors to size and grinding fronts Grinder features: A precise device enabling semi-automatic cutting of ejectors to size and grinding fronts in one clamping The grinder can be adjusted during operation The belt tension can be adjusted and controlled automatically (the greater the resistance, the tighter the belt) Grinder for cutting ejectors and grinding fronts Grinder for cutting ejectors and grinding fronts Manufacturer code 100 Grinder parameters: Redpfjvyuw Sjx Ac Tocf Motor power - 0.735kW Max. speed - 3 600 rpm Diameter range - ⌀1-25 mm Maximum length - 300 mm (optionally 500 or 600 mm) Length tolerance for ⌀25x300 mm: +/- 0.01 mm Dimensions LxWxH: 430x360x500 mm Weight - 109 kg Link to the video on YouTube:

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition Rodpfx Acera N A Ns Tscf make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: reconditioned (used), Year of construction: 2025, grinding length: 400 mm, grinding width: 200 mm, JUNG JF415 / JF420 rebuilt Rcjdpoc S Agvofx Ac Tef mechanicaly, geometricaly und electricaly rebuilt according JUNG acceptance protocoll for new machines - retrofit with new 12“-SIEMENS-Touch-OP control - new electrical cabinet with magnetic control for chuck - plain text error codes - electro mechanical vertikal feed - dresser compensation - automatic lubrication unit - all numeric values (verical feed) und on/off functions e.g. hydraulic and und coolant unit over touch panel - all analog functions e.g. rpm, magnetic force and feed of Z-axis fpr direct access of the worker over switches on the control panel - 12 month warranty delivery time approx. 12 weeks max. grinding range: 400 x 200 m

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Rsdpfx Acedy Hrdo Tjcf Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: new, pipe diameter: 10-114: (2x) 50 x 940grinding belt speed: 3-22 Rjdpfx Acsd Ab U Dj Tscf

Condition: new, Motor ----- 900W Voltage ----- 400V - 3 Phase Speed ----- 2950 rpm Grinding wheel dimensions ----- 250 x 32 x 32 mm Redpfjga Tw Asx Ac Tscf Coarse grinding wheel ----- Grit 36 Fine grinding wheel ----- Grit 80 Safety class ----- IP40 Weight ----- 32 kg OPTION * Base cabinet Price: €99.00 excluding VAT

Condition: new, ROGI surface grinder, type FSG-4080A Table dimensions ----- 406 x 813 mm Longitudinal travel of the work table ----- 900 mm Rcjdpfjga T Iajx Ac Tof Transverse travel of the work table ----- 450 mm Overhang ----- 580 mm Max. permissible workpiece weight ----- 500 kg Grinding wheel ----- 350×40×127 mm Motor ----- 4 kW Weight ----- 3400 kg Machine dimensions ----- 3600×2630 mm

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional N° 1 Infeed roller tracks (ca.) 18,000 mm + (OPTIONAL: Infeeder with chains) Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Rodpfx Asf Nkv Sec Tocf Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 ( Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min 2° Rear-pusher, with No. 7 (+1) clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 (Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels (N° 2 roller conveyors) Typ 68/20 and Typ 58/24 + N° 3 tables with motorised belts: 2 x Typ 255/56/2 and 1 x Typ 27/56) Total power Kw 110 ca.

Condition: new, Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Rcodpfx Acoum Tx Rs Tef Capacity: up to 6.000 kg/h Electric power: 55 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 131 Length: 205 Height: 245

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional cylindrical grinding machine EMAG W 11 Evolution. The conventional external-internal face cylindrical grinding machine fits perfect for single parts, prototypes and small batches. The basis of the EMAG W 11 Evolution machines is the established KARSTENS cylindrical grinder concept. No hydraulics, axis drives with servo motors and screw spindle drive, technology entry of the grinding parameters via touchscreen, automatic dressing with compensation, automatic axis release. TECHNICAL DATA Workpiece lenght: max. 1,500 mm Center height: 200 mm | Ooption 320 mm Workpiece weight: 250 kg Rcodpstmrlhjfx Ac Tef External grinding wheel diameter: max. 500 x 80 mm Workpiece headstock: MK4 | Option MK5 / MK6 Tailstock: MK 4 Price, delivery time and equipment of the machine according to agreement.

Condition: new, Grinder Sind 160 mm Model: AG 160 S Holeplate diameter: 160 mm Hopper content: 400 liters Throughput depending on material type, speed, cutting set: 7000 kg/h 2-speed working worm and 3-speed feeding worm – independent Dimensions: 150x165x198cm Rjdpfx Acsul T Aas Tscf Electric power: 33 kW Voltage: 380 V, 50 Hz Machine weight: 1600 kg