Used Wagner for sale (95)

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 80, see photos Gjdpfxsvznikj Aayskf -Weight: 11 kg

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set. Godpfx Aev Ed Ukeayekf

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total width: 2,600 mm, total length: 4,000 mm, 5 Pre-heating - WAGNER Powder Spray Booth Wagner - cleaning Wanzer S-PTG-004 Pre-heating - before spray booth - and after cleaning and Gel furnace built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Ask the drawing S-PTG-004 built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Gel oven: Only infrared radiators from Excelitas Nobelight (formerly Heraeus Nobelight) 400 V, 15000 W, heated length = 2,900 mm with a quantity of 12 units are installed here. Additional heating by metal tube heaters is not used here. Gksdpfx Aovy Ebhjayef Alignment oven Only metal tube radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 1 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 2 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here.

Condition: used, inner dimension height: 1,950 mm, inner dimension width: 1,850 mm, No. 3230 Complete paint shop Wagner Rafi / Wildcat / Finish 104 B Ex Used Complete spray room equipment Spray wall Rafi mobile 1850 x 1950 mm width x height 2 drying trolleys 1 spray gun Wagner Wildcat / IceBreaker motor / pump type 18 - 40 1 Wagner Finish 104 B Ex sprayer Sale by customer order, ex location near 69124 Heidelberg, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Gkedpfx Aajwn Tvuoyof Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: good (used), functionality: fully functional, Magnetic drum for sorting magnetic parts Gkedpfxjwigqus Aaysf

Condition: used, Year of construction: 2012, tube diameter 51 mm wall strength 3 mm semi-automatic operated UZMA bending radius max. 225 mm bending angle max. 190 ° bending speed 35 ° / sec. mandrel length 3.100 mm engine output 5,5 kW voltage 380 V total power requirement 11,0 kW weight of the machine ca. 1,36 t dimensions of the machine ca. 4,20 x 1,60 x 1,20 m - Serial No.: 0144 - semi-automatic mandrel bending machine - bending angle is program controlled - length + twisting angle manually adjustable - digital display for twisting angle, length and bending angle Gkodpfx Aaopungloyof - the following bending sets are included: 1.) R75 mm / Ø 20 mm 2.) R60 mm / Ø 25 mm 3.) R75 mm / Ø 30 mm 4.) R75 mm / Ø 40 mm 5.) R170 mm / Ø 50 mm 6.) R35 / flat Material 40 x 10 mm

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 1040 x 7 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo Gkodpfx Aaevzmdgjyjf -Weight: 53 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: MB116186, travel distance X-axis: 1,100 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Travel X: 1,100 mm Travel Y: 650 mm Travel Z: 600 mm Main spindle Maximum speed: 8,000 rpm Tool changer Magazine positions: 24 Tool holder: BT 40 Gsdpfx Aajwtq Skoyekf Worktable Table size: 1,300 mm x 600 mm Table load: 500 kg MACHINE DETAILS Control: Siemens 810D Machine number: MB 116186

Condition: used, Year of construction: 2024, Please find attached information about our powder coating and wet painting line, which we established last year in the Izmir Free Trade Zone. The facility is designed for bicycle painting. The dimensions are 680 × 680 × 2100 mm (L × W × H). Plant components: 1. 5-stage pretreatment washer, 2-stage plate heat exchanger, and heated stainless steel sheet 316 1.1. Water drying tunnel with reversing function, 135 m 1.2. Control panel 1.3. Medium-duty overhead conveyor 2.1. Label curing oven and conveyor belt, 75 m 2.2. Labeling area with air-conditioned roof and conveyor belt 3.1. Powder coating system, 135 m 3.2. Powder curing oven with 2 reversing functions 3.3. Powder spray booths not included; two Wagner powder spray booths 3.4. Medium-duty overhead conveyor Gedpexa Expofx Aayokf 4.1. Wet painting system 4.2. Powder coating oven 4.3. Wet spray oven 4.4. Exhaust ventilation 4.5. Four wet paint spray booths 4.6. Two air-conditioned mixing rooms 4.7. 290 m conveyor belt 5.1. Label application system, 90 m 5.2. Air-conditioned area in the roof The facility cost €2,800,000.00 as new. This is a fully automatic powder and wet paint line. Individual components can also be purchased. If you are interested, please do not hesitate to contact us.

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa 1ks. high pressure pump Wagner 600 Airless 2ks. high pressure tank Kovofiniš TZ60M und TZ100M 1ks. Tank Kovofiniš. On stock. Sellable immediately. Total price 1000 Euro. Godpfx Aasd Nnb Reyjkf

Year of construction: 1986, condition: excellent (used), machine/vehicle number: 43153, heavy duty circular saw Gksded N Uw Rjpfx Aaysf ..more information following soon..

Year of construction: 1988, condition: ready for operation (used), Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible. Gkedpfxow Tc R De Aayjf

Condition: used, transformer Gkedpfx Aaed Ndi Ujyof -Type: EE 800 -Primary: 380 V -Secondary: 63 V 6.35 A. -Dimensions: 160/130/H180 mm -Weight: 12.3 kg

Condition: excellent (used), Year of construction: 2017, Loading lift table for covered outdoor areas - second-hand : Price ex location: 6.950.-€ (net)! Manufacturer: Wagner Type: Lifting table in special design, ELS 1-10-TI-SO Year of construction: 2017 Overall height (h): 200mm Effective stroke (N): 1000mm Gkodpfx Ajr Il Ukeayof Maintenance stroke: 1000mm Final height (H): 1200mm Overall length: 1,800mm Total width: 1,000mm Lift category: 4 Dead weight: approx. 450kg Load: Load capacity: 1,000kg Load distribution: Surface load or max. 1/6 lifted as wheel load Can be driven over when retracted: No Platform: Platform length: 1,800mm Platform width: 1,000mm Railing pluggable Condition: very good Available: immediately Location: Stuttgart-Feuerbach 1077 Berlin A detailed item description is available on request. Application: Loading lift table for the covered outdoor area, narrow side C is at the ramp. A Euro pallet is transported with a pallet truck.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table width: 2,600 mm, table length: 4,000 mm, CLEAR Coat TOUGH Coat ProfiTech controll EPG Spint High Coat PEA-C4 with CoronaStar colour powder coating flat glass and laminating line for flat glass or other materials Glass size max.: Length 3600mm x width 2600mm. 90m long with installed 1100 kW power 2 tilting table, light handling crane, vertical washing machine, powder booth for coating flat material, demi water plant and so on Pos. 1 Loading Station with Glass Lift Pos. 2 Vertical Inlet Transport WM Pos. 3 Vertical Washing Machine with Drying Pos. 4 Vertical Inspection Transport with glass Activation Section Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Pos. 6 Pre-Heating Section Pos. 7 Powder Section with Belt Cleaning Pos. 8 Cleaning Transport Pos. 9 Gel Oven Pos. 10 Alignment Oven Pos. 11 Laminator Pos. 12 Cure Oven Pos. 13 Cooling Section Pos. 14 Tilting Table with Vertical and Horizontal Transport Gjdpfx Astwn Ipeayjkf Pos. 15 Vertical Inspection station Pos. 16 Unloading Station with Glass Lift Pos. 17 Electrical Distribution Pos. 18 Demi-water plant for the supply of the glass washing machine

Condition: new, Year of construction: 2023, There are 3 Sets of Coating System subjected to this listing; Details; 1- 2023 Wagner liquid coating system consist of; -2 pcs Isolate paint supply set Each consisting of: 1- 1 pc Isolated table approx. dimensions 3200x1000x1900 h. mm. • Standard grounding system • 2 Electric locks, one for paint supply access door and one for the spray booth access door complete with electric wiring • Lamp red / green for electrostatic on / off status 2- 3 pcs Wagner Pneumatic elevator for 25l drum covers complete with: stainless steel cover with inspection hole and suction pipe pneumatic agitator rotation block when in high position 3- 4 pcs Wagner double diaphragm pump, mod. DD10 (4 for paint and 1 for water) pressure ratio 1:1, complete with: pressure regulator and gauge for the motor feeding air fluid filter group suction hose for 25 l drum cover (for paint) suction hose for 25 lt drums (for cleaning water) 4- 1 pc flusching pressure tank for CUP BELL -2 pcs Reciprocator mod. VU 1-2700mm stroke • High stability: solid mechanical construction with light weight, but robust • design thanks to the aluminum sections and an high precision linear • guide with cage for wheels. • Sturdy: can handle up to 49kg • High safety: completely suitable for use in explosive areas EX II 3G • Simple and intuitive maintenance of the toothed belt which guarantees a • long service life • Powerful: stroke speeds from 7 up to 80m/min and • acceleration up to 6m/s • stroke speed variantion along the stroke • Electric Motor protection cover • Sliding base 600mm with electric engine to move automatically back and forth the reciprocator • Isolated mounting brackets • High stability: solid mechanical construction with light weight, but robust • design thanks to the aluminum sections and an high precision linear • guide with cage for wheels. • Sturdy: can handle up to 49kg • High safety: completely suitable for use in explosive areas EX II 3G • Simple and intuitive maintenance of the toothed belt which guarantees a Gjdpfx Aaoxcnk Tjyokf • long service life • Powerful: stroke speeds from 7 up to 80m/min and 2- 2023 Wagner Projekt Powder Supercube System -Booth Supercube with 2 slot eachside In sandwich PVC- Length 2.500 -Powder Suction and Seperation Cyclone and Filter 17.000 mc/h (16.000 + 1.000) -Powder Centre SUPERCUBE EVO with IP Pump with Container Ultra siewe included + extra container without siewe -Application Technology PROFITech With N*12 PEA-C4 XL automatic guns N*16 automatic guns PEA-C4 XL (8 on reciprocator1 + 8 on reciprocator2) Movement N*2 moving reciprocators with motorised moving bases. -N*2 electronic reciprocators with fences -N*2 electronic fast mobile bases for scanning pieces -N*1 Vertical and Horizontal Scanner reading system of pieces N*1 encoder for connecting conveyor to Touch panel N*1 Software 4.0 Data production with data management Powder Consumption Colour Change Time Stop Production counter -Two external platforms (2 x manuel PEMX1 guns) For more details please get in contact ...

Condition: used, maximum load weight: 6,020 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 01/2019, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 400 mm, Year of construction: 2019, Equipment: ABS, * Overloader/Drive-over * Leaf/Leaf * Drum brakes Subject to error and prior sale Viewing by appointment only WhatsApp enquiries will not be answered Gsdpsuz Shuefx Aayokf

Year of construction: 1987, condition: ready for operation (used), A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available. Gjdpsttv Uaofx Aayskf

Condition: used, transformer -Type: EE 355 -Primary: 380 V -Secondary: 220 V 1.45 A/21 - 24 V 1.5 A -Dimensions: 120/100/H130 mm -Weight: 5.3 kg Godpfx Aed Ndi Roayskf

Condition: ready for operation (used), An IFE magnetic separator with a Wagner magnet is available. Magnet type: FE0446-30/55, magnet weight: approx. 78kg. On-site inspection is possible. Gjdpfx Aaov Dwi Eeyokf

Condition: used, fuel type: electric, Chassis, electric motor, DC motor, traction motor, drive motor Godpjdq Id Uofx Aayekf -Chassis for: pedestrian stacker make Still type EGU2000 -with: slewing ring and drive (steering) -Wheel: 240 x 80 mm -Dimensions: 290/290/H620 mm -Weight: 64 kg

Condition: ready for operation (used), Year of construction: 1988, An older Wagner bagging system for non-lumpy bulk materials including an automatic scale is available. An on-site inspection is possible. Gksdpewn H Uksfx Aaysf

Condition: used, pneumatic piston pumps, airless high pressure pump, air motor, AIR MOTOR, paint pump -Roles with: Airles technology (without rollers) -Piston pump manufacturer: Wagner -Type: professional scooter -Material volume: max. 1.8 l/min -Max. Pressure: 12 bar -Material temperature: max. 35 °C -Number: 2x pumps available -Price: per piece Gsdpod Dh Dcefx Aayokf -Dimensions: 270/145/H225 mm -Weight: 7.1 kg

Year of construction: 2009, condition: ready for operation (used), Verfahrweg X/Y/Z: 3200mm/1100mm/900mm, max. Werkstückgewicht: 5000kg, Tischdimensionen X/Y/Z: 3250mm/1220mm/1030mm. Spindelleistung: 45kW, Drehzahl: 6000U/min, Werkzeugaufnahme: SK50, Werkzeugdurchmesser: 125mm, Werkzeuglänge: 300mm, max. Werkzeuggewicht: 15kg, NC-Rundtischdimensionen X/Y: 800mm/800mm. Maschinendimensionen X/Y: ca. 7800mm/4700mm, Gewicht: ca. 25000kg, Steuerung: Siemens Sinumerik 810D Shopmill, Betriebsstunden: ca. 32000h, Spindelstunden: ca. 18000h. Inklusive Späneförderer und IKZ. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich. Gjdsv Hrg Dspfx Aayekf

Year of construction: 1988, condition: ready for operation (used), Drilling capacity: 35mm, drill spindle taper: MT4, quill stroke: 285mm, reach: 300mm-1000mm, speed: 2500rpm, arm length: 500mm, spindle-to-base plate distance: 1000mm, base plate dimensions X/Y: 1150mm/780mm. An on-site inspection is possible. Godew Nq Suspfx Aayekf