Used Vsd for sale (125)

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Gsdoxmkc Tjpfx Aaxsit

Condition: excellent (used), Year of construction: 2002, operating hours: 122,000 h, functionality: fully functional, overall weight: 3,000 kg, total length: 25,400 mm, total width: 1,600 mm, total height: 2,000 mm, power: 165 kW (224.34 HP), fuel type: electric, volume flow: 1.56 m³/h, operating pressure: 8 bar, noise level: 65 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Gisdpforn S Hpex Aaxst Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023. Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

Condition: like new (used), functionality: fully functional, overall weight: 749 kg, fuel type: electric, total length: 2,765 mm, total width: 1,346 mm, total height: 1,435 mm, power: 37 kW (50.31 HP), volume flow: 6.6 m³/h, pressure (min.): 5 bar, pressure (max.): 12 bar, ambient temperature (max.): 50 °C, noise level: 61 dB, type of cooling: water, Year of construction: 2023, machine/vehicle number: APP876730, The Atlas Copco E-Air H250 VSD is a single-stage, oil-injected screw compressor driven by an Atlas Copco electric motor with class H insulation and a speed of up to 9000 rpm. Unique to this new range is the PACE functionality in conjunction with the intuitive XC2003 control system. This ground-breaking technology enables multiple pressure and flow settings, allowing you to adjust the airflow and pressure to suit the requirements of your application. The E-Air VSD motor is characterized by its compactness, energy efficiency and quietness. In addition, the compressors are easy to install and operate. No exhaust fumes, unrivaled performance, low noise level. A plug-and-play design also allows you to transport the E-Air anywhere. Warranty for demonstration unit: 12 months from delivery Scope of delivery of the compressor: - Integrated permanent motor from Atlas Copco - Soundproofed HardHat hood - Cooling circuit with aftercooler - Air and compressed air connection - Air/oil separator and control systems - Leak-proof frame made of ASTM A653 Zincor sheet steel with powder coating - Closed floor pan - Undercarriage/chassis with fixed drawbar and hydraulic brakes - Overrun and parking brake, automatic reverse, star wheel - Truck DIN towing eye (40 mm), car coupling enclosed loose - 205R14C wheels for trailer operation Gjdpfxoud H Tno Aaxoit - Lighting and operating license according to StVZO

Condition: used, Year of construction: 2016, operating hours: 20,256 h, machine/vehicle number: API831057, Lg.No. 25372 Technical Data: - Operating hours: 20,256 h - Operating pressure: 13 bar - Delivery rate: 4.09 m³/min - Drive: 400 V / 26 kW - Motor speed: 3,000 rpm Gedpoycvtwefx Aaxoit - Required space approx.: W 900 x H 1,750 x D 900 mm - Weight approx.: 490 kg

Condition: excellent (used), Year of construction: 2016, volume flow: 2.2 m³/h, pressure (min.): 8 bar, ATLAS COPCO GA 11 VSD + screw compressor Gsdpeytyh Hjfx Aaxsit Variable speed (with inverter) 11 kW motor Capacity 1.95 m3/min Pressure 13 bar Year of manufacture 2016 Operating hours: 9,150 h

Condition: excellent (used), Year of construction: 2014, volume flow: 2.2 m³/h, pressure (min.): 8 bar, ATLAS COPCO GA 15 VSD+ Screw Compressor Variable speed (inverter driven) 15 kW motor Capacity: 2.51 m³/min Gjdsytyd Uspfx Aaxsit Pressure: 13 bar Year of manufacture: 2014 Run hours: 11,380 h Compressor serviced – filters and oil replaced.

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Gisdpju Rptysfx Aaxot Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: A11 702998, Equipment: type plate available, Compressor unit with pressure vessel, air dryer, and additional accessories Godpfx Aoxviiwjaxoit

Condition: good (used), Year of construction: 2013, Atlas Copco compressor used Type: GG-90-VSD Power: 62kW Year of manufacture: 2013 Please only view by telephone arrangement! Preferred sale to dealers, traders or exporters. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gjdpfxjtu Uhme Aaxeit Of course, we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2006, MANUFACTURER: ATLASCOPCO MODEL: GA18VSD Godpfx Aajyk Tk Asxoit S/N: API422436 YEAR: 2006 POWER (kW): 18.5 CAPACITY (m3/min): 3.35 PRESSURE (bar): 13

Condition: good (used), Year of construction: 2007, overall weight: 1,400 kg, volume flow: 522 m³/h, pressure (max.): 12.8 bar, Equipment: refrigerant dryer, PROD. ATLASCOPCO TYPE GA45VSDFF Gijdpfxsvrg R Uj Aaxet YEAR 2007 CAPACITY (kW) 45 45kw OUTPUT (m3/min) 8.7 CIS (bar) 12.8 INVERTER yes BUILT-IN DRYER yes EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: new, Year of construction: 2026, Set containing the LUFT 1000 VSD screw compressor and the N10S air dryer. The LUFT series screw compressor of the Polish brand CORMAK is the most modern solution used in pneumatics combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction and high efficiency of the device are a guarantee of effective and trouble-free operation. Additional double filtration at the dryer! Technical parameters LUFT 1000 COMPACT VSD Compressor Motor power 7.5 kW Gijdpfx Aokly Itjaxst Dryer Motor power 0.29kW General parameters Efficiency at 0-6 bar 990 l/min Efficiency at 6 bar 950 l/min Efficiency at 8 bar 950 l/min Efficiency at 10 bar 930 l/min Outlet G 3/4" Overall dimensions 1320 x 650 x 945 mm Weight 500 kg Manufacturer: Cormak

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Gjdjv Rmmmjpfx Aaxsit

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 Gedpfx Ajwlp Hdeaxsit If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: used, Year of construction: 2009, MANUFACTURER: ATLASCOPCO MODEL: GA75 VSD SERIAL NUMBER: API656533 YEAR: 2009 POWER (kW): 75 Gisdoxxm Atepfx Aaxet CAPACITY (m3/min): 14.68 PRESSURE (bar): 13

Condition: like new (used), GA (W) VSDs (Variable Speed Drive) are single-stage, oil-injected, electric motor-driven, stationary screw compressors. The cooling system is equipped with an air cooler and an oil cooler. GA VSD are air-cooled compressors; cooling air is provided by a fan. Godpfx Aaswxwxzjxjit Main features: - Maximum air inlet temperature: 40°C. - Maximum cooling water outlet temperature: 50°C - Temperature of the air leaving the outlet valve approx.: 30°C - Approximate oil capacity: 17.9 L

Condition: new, Year of construction: 2026, Set Including LUFT 1500 COMPACT Screw Compressor with VSD Inverter and N10S Refrigeration Air Dryer Gedpfjxmg Npox Aaxoit The LUFT series screw compressor from the Polish brand CORMAK represents the latest innovations in pneumatic systems, combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction, and high performance guarantee efficient and trouble-free operation. Additional Dual Filtration at the Dryer Included! Key Features Innovative Design Our screw compressors are based on advanced engineering and European manufacturing precision. The robust construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Efficiency Optimization Thanks to variable speed drive (VSD) technology and intelligent algorithms, the CORMAK LUFT 1500 COMPACT screw compressor dynamically adjusts energy consumption to the current demand for compressed air. This results in significantly lower operational costs while maintaining maximum performance. Integrated Refrigeration Dryer The COMPACT version with a built-in refrigeration dryer provides a space-saving and comprehensive solution in a single device. The integrated dryer ensures dry and clean compressed air, protecting your system from corrosion and damage. Quiet Operation & Comfort Designed with attention to detail, our screw compressors operate at exceptionally low noise levels. Effective noise reduction and vibration damping systems ensure a comfortable working environment, improving operator focus and overall workplace comfort. Smart Control The intuitive MAM electronic control panel is the command center of your compressor. It allows precise parameter monitoring, maintenance scheduling, and quick diagnostics—ensuring system stability and protecting key components. Adaptability to Your Needs We understand that each application is unique. CORMAK screw compressors can be configured with additional air treatment systems, allowing for perfect alignment with your industry's specific requirements. Dynamic Working Pressure Automatic pressure regulation ensures the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development We are committed to environmentally friendly solutions. The energy-efficient technologies used in our compressors not only reduce your electricity bills but also limit environmental impact. Integrated Refrigeration Dryer – Top-Level Air Quality Two-Stage Drying System Effectively removes moisture and protects your pneumatic installation. Variable-Speed Fan Automatically adjusts cooling performance to working conditions, improving energy savings. Dual Filtration System Pre-filter with 3.0 µm precision removes larger solid contaminants. Fine filter with 0.1 µm precision captures oil aerosols and other small particles, delivering ultra-clean air. Technical Specifications Specification Value Motor Power 11 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 1620 L/min Air Delivery at 6 bar 1580 L/min Air Delivery at 8 bar 1350 L/min Air Delivery at 10 bar 1230 L/min Outlet Connection Diameter (G) 1" Dimensions (L x W x H) 1550 x 740 x 1150 mm Weight 500 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 72,651 h, functionality: fully functional, Screw Compressor Atlas Copco GA37VSDFF Integrated inverter and dryer 37 kW 12.80 bar 7.37 m³/min Year of manufacture: 2012 Gedpfx Aey Rva Ijaxeit Operating hours: 72,651

Condition: excellent (used), Year of construction: 2019, operating hours: 53,672 h, functionality: fully functional, Screw compressor Atlas Copco GA110VSD+FF Integrated inverter and dryer 110 kW Gedjy Ru Scopfx Aaxeit 12.75 bar 20.70 m3/min Year of manufacture: 2019 Operating hours: 53,672

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Gsdpfxexk U Ale Aaxoit Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: used, Year of construction: 2019, power: 30 kW (40.79 HP), volume flow: 4.95 m³/h, pressure (max.): 12.75 bar, Atlas Copco AQ30VSD FF Air Compressor Manufacturer: Atlas Copco Model: AQ30VSD FF Year of manufacture: 2019 Country of origin: Belgium Maximum pressure: 12.75 bar Power: 30 kW Free air delivery: 4.95 m³/min Air flow rate: 82.5 l/s, 174.8 cfm, 4.95 m³/min Motor power: 40 HP Motor speed: 8,600 rpm Weight: 702 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Control system: Elektronikon Graphic Equipment: SMARTLINK Origin: Made in Belgium Gijdpfexk U Arsx Aaxet No liability is accepted for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Year of construction: 2015, operating hours: 19,431 h, functionality: fully functional, Screw compressor Atlas Copco GA22VSD+FF Integrated inverter and dryer 22 kW 12.75 bar Giedpjy Nlqgofx Aaxst 4.51 m3/min Year of manufacture: 2015 Operating hours: 19,431

Condition: excellent (used), Year of construction: 2005, operating hours: 20,770 h, functionality: fully functional, Screw compressor Atlas Copco GA18VSDFF Integrated inverter and dryer. 18.50 kW 12.80 bar 3.35 m3/min Year of manufacture: 2005 Gijdpfx Aajy Nlg Uexet Operating hours: 20,770

Condition: like new (used), Year of construction: 2023, operating hours: 10,626 h, functionality: fully functional, Used Atlas Copco FD220VSD-G Refrigerated Dryer - Premium Gijdpfxoy Iwtds Aaxot 13.20 m³/min 14 bar Year of manufacture: 2023 Operating hours: 10,626

Condition: excellent (used), Year of construction: 2011, operating hours: 50,496 h, functionality: fully functional, Screw Compressor Atlas Copco GA11VSDFF Integrated frequency converter and dryer 11 kW 12.75 bar 1.84 m3/min Godey Ipcwjpfx Aaxjit Year of manufacture: 2011 Operating hours: 50,496