Used Vibro Table for sale (16,736)

Condition: new, total power requirement 230 Volt Duedpfxoxaatnj Ag Dep table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. Dodpfx Agjxaafqo Dsup - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: used, 1200mm Stainless Steel Mobile Rotary Collecting Table 240 Volt with 380mm Mobile Conveyor, 240 Volt Dujdpfeyimfzox Ag Dop Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: PW2000-003, total height: 1,300 mm, empty load weight: 1,310 kg, load capacity: 2,000 kg, total length: 2,600 mm, total width: 1,800 mm, table width: 900 mm, input voltage: 400 V, working height: 1,100 mm, table length: 1,400 mm, Dimensions LxWxH: approx. 2600 x 1800 x 1300 mm Load capacity: 2,000 kg The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is at the bottom during swiveling, the load-bearing steel profiles are angled upward by 90° to securely hold the plate being turned even in a vertical position during a 90° rotation. Both tables are positioned opposite each other and are swiveled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing base frame, with one table fixed in place and the other movable. The movement is performed by hydraulic cylinders which can displace the table mounted on rollers by approx. 300 mm. The base frame also houses the hydraulic and electrical components. A hydraulic power unit is used as the drive source, supplying oil to the cylinders in response to control commands. The respective valves are actuated electrically and/or hydraulically, initiating and maintaining the required table movements in interaction with each other until the turning process is complete. Dusdpfoyr I Dtsx Ag Djp Particular attention in the design of the hydraulic system is given to operational safety and sensitive switching between pushing and pulling motions. The geometry of the table pivot axes results in changing load effects on the tilt cylinders. The hydraulics are designed to ensure the required performance and prevent overloading the components during normal operation. Suitable filters, in combination with a generously sized tank, ensure high availability of the hydraulic system. The necessary electrical control system is fully integrated into a sheet steel enclosure housing all required components. The core of the control system is a PLC, which processes operating parameters based on the programmed specifications. The emergency stop function and all relays and evaluation units required to operate the functions are also installed. Operation of the turning device is via a control panel featuring a touch panel for entering function parameters, such as Table 1 swivel up, Table 1 swivel down, Table 1 forward, Table 1 back, Table 2 swivel up, Table 2 swivel down, as well as automatic start/stop. To prevent table collision in manual mode, the PLC programming ensures this by using table position and tilt data. After resolving an emergency stop, the PLC control independently completes the turning process. The turning device is equipped with heavy-duty castors, making it mobile. We have several of these devices in daily operation. This unit is unused.

Condition: new, BRAND NEW NC ROTARY TABLES Working position: vertical - horizontal Applications: positioning - stepless rotation // interpolation Rotary table faceplate diameter: 500 / 600 / 800 / 1,000 / 1,200 mm – The clamping surface can also be square Max. workpiece weight (horizontal): up to 20,000 kg Max. workpiece weight (vertical): up to 4,000 kg Positioning accuracy: ± 3 arc seconds Integration into machines with HEIDENHAIN or SIEMENS controls. Dusdsm Tvz Dspfx Ag Dsp Only inquiries from Germany will be answered.

Condition: new, FACTORY NEW ROTARY TABLES // ROTARY-SLIDE TABLES Positioning, simultaneous turning, and interpolation Rotary table sizes: 1,000 x 1,000 // 1,200 x 1,200 // 1,500 x 1,500 // 1,800 x 1,800 // 2,000 x 2,000 // 2,500 x 2,500 // 3,000 x 3,000 // 3,500 x 3,500 // 4,000 x 4,000 mm --- The clamping surface can also be round instead of square - Maximum workpiece weight: 6,000 to 80,000 kg Optional sliding axis: 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ±5 arc seconds Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet Duedjm Tv Azjpfx Ag Djp

Condition: new, Adopts a typical cross table layout Equipped with a high-precision, high-end gearbox with precise gear shifting Suitable for milling, boring, drilling, reaming, tapping, turning, etc. of large workpieces Duodpfx Aoynzvbeg Djp Fanuc - Siemens - Heidenhain

Condition: good (used), Year of construction: 1986, CNC Table-type Boring Mill Manufacturer: TOS VARNSDORF Model: WH 10 NC Year: 1986 with Heidenhain TNC 135 control. Spindle diameter: 100 mm Duodoyk Tltjpfx Ag Dsp Spindle taper: SK50 Spindle speeds: Motor 20 kW Spindle travel: 630 mm Travel paths: X 1250 mm, Y 1100 mm, Z 950 mm Table size: 1000 x 1120 mm, load capacity 3000 kg Weight: 12,800 kg Equipped with coolant system, machine documentation available. Machine not under power.

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table Dedpsykzhvefx Ag Doup -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg

Condition: used, Year of construction: 2013, machine/vehicle number: 13051888-1/012 Art.-Nr. 6153100, Technical data: - Manufacturer: Unikraft - Type: SHT 1001 G - Year of manufacture: 2013 - Platform dimensions: 1450x1130mm - Lifting capacity: 1,000kg - Hydraulic lifting device - Net weight: 250kg Dsdpfx Agjwxtwys Deup - Min. height: 82 mm - Max. lifting height: 760 mm - Duration from 82 to 760 mm Lifting height: 18 s - Motor power: 0.75 kW - Anti-pinch strips - Voltage/Hz: 400/50 - Location: Blomberg warehouse

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Location: Supplier Dujdpfx Aoxta Dyjg Djp

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Table Type Boring and Milling Machine | Brand: TOS-VARNSDORF | Type: VARIA | Year of construction 2005 The machine can be inspected under power by appointment. Condition: Fully functional / ready for use. TECHNICAL DATA: - Working spindle diameter: 130 mm - Hollow cone working spindle: ISO 50 - Spindle speed range: 10 - 3.500 rpm - Crosswise adjustment of table X: 4.000 mm - Vertical adjustment spindle box Y: 2.500 mm Dusdpfxjyr R Sys Ag Dep - Longitudinal adjustment of the column Z: 2.000 mm - Extension of working spindle W: 800 mm - Clamping surface of the table: 1.800 x 1.800 mm - Max. Workpiece weight: 20 tons - Machine weight: approx. 36,85 tons Electrical data: - Total installed power consumption: 110 kVA EQUIPMENT: - CNC Control: SINUMERIK 840D pl - Tool changer (chain magazine): 60-position - Chip conveyor - Documentation - CE marking Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Dedpfx Agjxpxrho Deup Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.5 mm over 1000 mm.

Condition: new, table length 2400 mm table width 1200 mm table height 850 - 900 mm weight of the machine ca. 0,65 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Djdpfexpxrbsx Ag Dsup Including floor bearings Accessories optional! Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck is not included.

Condition: new, table length 2000 mm table width 1000 mm table height 850 - 900 mm weight of the machine ca. 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 Duedpfx Asgp Dymeg Dsp The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N Dujdpfxed Iinco Ag Dop (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 1300 mm table width 800 mm stroke height 1010 mm weight max. in kg 2000 kg 190 mm connected load frequency 400 V total power requirement 0,75 kW stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. weight of the machine ca. 0,28 t dimensions of the machine ca. 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. Dedpfxjfrzt Aj Ag Djup

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere Dedpfsfv Aykex Ag Doup connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery Dsdjgxi Ebjpfx Ag Doup

Condition: new, table length 2400 mm table width 1200 mm Dodpfx Agsgp Dyqj Deup table height 850 - 900 mm weight of the machine ca. 0,65 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically Duodpfx Aoyr Numjg Dop The increment is done by the front handle

Condition: excellent (used), Manual rotary table Ø 450 mm Total height: 150 mm Base dimensions: Length 580 mm x Depth 500 mm Weight: approx 150 kg Dodpfx Agoyr I Ncs Deup In very good condition

Condition: used, Year of construction: 2016, Automatic cutting table system for textile and leather Manufacturer: Atom Model: FlashCut Easy 222 Year of manufacture: 2016 CNC control Usable cutting/table area: 1,000 x 600 mm Maximum cutting height: 20 mm Static vacuum table with single-zone clamping High-performance vacuum turbine, 4 kW output Servo drive for X, Y, and Z axes Safety features with light curtain monitoring and emergency stop switch 1 high-intensity light projector Vacuum power: 4 kW Connected load: 6.5 kW 380 Volts, 3-phase, 50 Hz Compressed air: 6 bar, 200 l/min (when using pneumatic tool attachments) 9 bar, 400 l/min Software DXF converter for reading and converting CAD files Interactive layout software license Automatic nesting software license CAD software module for easy creation of geometries Dodpfsyf Euiox Ag Dsup Multi-tool head, 20 mm cutting height Comprising 5 tools: 1x tool module for all cutting tools 2x punching modules with integrated extraction, punch diameter 1 - 8 mm Ink cartridge for applying markings 1x badge needle 1x laser pointer Machine dimensions: 1,600 x 1,235 x 2,190 mm Weight: 440 kg Reference no.: 9226

Condition: used, Year of construction: 2016, Automatic cutting table system for textile and leather Manufacturer: Atom Model: FlashCut 2H 1660B UP Year of manufacture: 2016 CNC control Working area: 1,540 x 1,200 mm Cutting window: 1,540 x 600 mm Maximum cutting height: 20 mm Maximum traverse speed: 80 m/min Maximum acceleration: 1G Vacuum output: 1 – 8 kW Connected load: 5.5 kW 380 Volt, 3 phase, 50 Hz Compressed air: 6 bar, 200 l/min (when using pneumatic tool holders) 9 bar, 400 l/min Equipped with 2 independently operating multi-tool heads, each comprising: Tool module for all tool inserts Pen module for marking 2 punching tools with different diameters Minimum diameter: 1 mm Maximum diameter: 8 mm One needle Perimeter conveyor belt (feeds material into the working zones) Vacuum table divided into 300 x 300 mm quadrants High-performance vacuum turbine with frequency control up to 1 – 8 kW High-intensity projector Servo drive for X, Y, and Z axes Safety device with light barrier monitoring and emergency stop switch Machine dimensions: 2,210 x 2,506 x 1,841 mm Dusdeyf Egxopfx Ag Djp Weight: 1,630 kg

Condition: new, table length 1200 mm table width 1200 mm table height 840 - 890 mm weight of the machine ca. 0,32 t Dodpfx Agjpk Iv Ue Deup Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery