Used Universal Machining Centre for sale (66,394)

Condition: used, Year of construction: 2005, x-travel 620 mm Laedpjylcpqofx Amrec y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 124 turning speed range - spindle 50 - 4.000 U/min transmission ratio 2 drive capacity - spindle motor 6 kW tension force 10 kN swivellable manuell +/-45 ° max. tool diameter 125 mm max. tool weight 6 kg table surface area 400 x 800 mm T-slots 5x14x80 max. table load 400 kg feed speeds X/Y: 0 - 6.000 mm/min feed speeds Z: 0 - 4.000 mm/min rapid traverse X/Y: 6 m/min rapid traverse Z: 4 m/min total power requirement 11 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,9 x 3,5 x 2,0 m Includes: Heidenhain TNC124 point-to-point control Electrical documentation available Coolant system 2 work lights Machine vise Various tool holders Various SK40 tools Enclosure with 2 sliding doors available, pictures to follow

Condition: used, x-travel 500 mm y-travel 200 mm z-travel 400 mm table surface area 700 x 300 mm tool taper SK 40 - S20 Lsdex Hay Djpfx Amrsac feed 8 - 400 mm/ min rapid traverse in X und Z 1200 mm / min turning speeds 40 - 2000 U/min total power requirement 2,2 kW weight of the machine ca. 1400 kg dimensions of the machine ca. 1500 x 1200 x 1600 mm Includes 2-axis digital display Heidenhain

Condition: used, x-travel 800 mm y-travel 400 mm z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min Lajdjqpl Uujpfx Amrsc spindle taper SK 40 total power requirement 2,2 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 300 mm rapid traverse 1,2 m/min feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 stroke v60 h70 mm table - universal ca. 620 x 320 mm table vertical adjustable 350 mm weight of the machine ca. 1200 kg Lodpjxv D Uzefx Amrsac Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment

Year of construction: 1988, condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm digital readout Heidenhain 3 Achsen spindle taper SK 40 Ljdpfx Amoqpl Uqsroac spindle turning speed range 50 - 2500 U/min table-size 650 x 375 mm weight of the machine ca. 1,5 t dimensions ca. mm

Condition: used, Year of construction: 1999, x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 124 swivellable manuell +/-45 ° max. tool diameter 125 mm max. tool weight 6 kg table surface area 400 x 800 mm T-slots 5x14x80 max. table load 400 kg feed speeds X/Y: 0 - 6.000 mm/min feed speeds Z: 0 - 4.000 mm/min rapid traverse X/Y: 6 m/min rapid traverse Z: 4 m/min total power requirement 11 kW weight of the machine ca. 2 t Ledpfx Amjy Ay Nqersac dimensions of the machine ca. 2,9 x 3,5 x 2,0 m

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Laodpoxhg Diofx Amrjc Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: excellent (used), Year of construction: 1997, Heidenhain Mill-Plus control system Travel ranges X/Y/Z: 500 x 380 x 380 mm Ljdpfszfx Ubex Amrjac Clamping surface: 500 x 400 mm Tool magazine for 24 tools, SK 40 Spindle speed: 8,000 rpm NC rotary and tilting table Chip conveyor

Condition: excellent (used), HEIDENHAIN TNC430 with B + C axis Working travels 800 x 600 x 500 mm Table size Ø 280 mm Lsdpfx Amsk Dz Ngoreac Table swivelling +/-110° Table rotating 360° Spindle taper HSK63 Spindle speeds -15'000 rpm tool changer 30 pos. Coolant through spindle 3D tracer Renishaw MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 0-250-95-6951, functionality: fully functional, operating hours: 682 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, working width: 1,415 mm, spindle motor power: 10,000 W, working length: 3,100 mm, 2017 HOMAG Weeke Venture 115 CNC machining centre in excellent condition. Lightly used machine with very low spindle hours for age. Moved once since initial install. Machine is currently installed, calibrated, and available for inspection under power. - 10kw spindle - 18 position drill block with grooving saw - Multipurpose saw 118mm cut depth - 22 position tool change capacity - Pod & Rail Table with LED positioning indicator This is a clean, well-kept machine from a low-use environment, not a hard-worked production machine. Important point on specification: the machine is 5-axis capable, but the additional 5-axis software licence is not included in the sale. This can be added via Homag at additional cost if required. Ljdoy S Dfbopfx Amreac Buyer responsible for decommissioning, loading, transport and insurance. Machine available for demonstration in situ by appointment.

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives • BA 4 per traveling column Laedpfx Ajzfg S Usmroc • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit • Short delivery time, immediately available – subject to prior sale – Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column Laedjzfg Rkjpfx Amrsc • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column Laodszfg Rdjpfx Amroc - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!!!

Condition: ready for operation (used), Year of construction: 1993, x-travel 400 mm y-travel 375 mm z-travel 350 mm turning speeds 63 - 4000 U/min spindle taper ISO 40 Pull studs ISO TYP B quill stroke 50.0 mm table: 650 x 350 mm Lodpfx Amszbc Dyersac workpiece weight max. 200 kg T-slots 5x 14H7 feed range 10 - 1000 mm/min rapid traverse 1.5 / 1.0 m/min Number of working hours ca. 504 h control DIGI "VRZ 650" voltage 380 V total power requirement 8.0 kW weight of the machine ca. 1550 kg. range L-W-H 1640 x 1580 x 1840 mm from a training center very little run (!!) operating hours approx. 504 hours - in checked conditions - machinevideo - ?v=Zh5eNVEjl88 Equipment: - robust conv. electro-motorized universal milling machine - HEIDENHAIN digital display incl. control panel * swiveling, front right * display font 0.005/0.001 mm - Electro-motorized adjustment of all axes (X/Y/Z axis) * rapid traverse in all 3x directions * Manual adjustment via handwheel also possible - Infinitely variable speed adjustment - Vertical milling head with quill adjustment * ISO 40 tool holder * automatic tool clamping with clamping/pull bar * Swivel milling spindle guard - Robust work table incl. T-slots ... 650 x 350 mm * Number/size of T-slots 5 pieces 14H7 * Distance T-slots 63.0 mm * Safety housing (own construction) - Coolant device incl. lower chip tray - Counter support = horizontal milling device - Halogen/machine lighting - Central lubrication incl. container - Original operating instructions

Condition: excellent (used), Year of construction: 1993, x-travel 500 mm y-travel 380 mm Ledpfxjzbc Dgs Amreac z-travel 350 mm tool taper ISO 40 spindle turning speed range 63.0 - 4000 U/min feeds 10 - 1000 mm/min quill stroke 50.0 mm table-size 800 x 360 mm table load ca. 250 kg T-slots 14H7 - 5/63 mm rapid traverse X-axis 1.5 m/min rapid traverse Z-axis 1.5 m/min rapid traverse Y-axis 1.0 m/min Control DIGI "VRZ 650" Number of working hours 810 h voltage 380 V control voltage 110 V engine output 8.0 kW weight 1850 kg dimensions of the machine ca. 1880 x 1796 x 1840 mm from a training center very little run (!!) operating hours approx. 810 hours Equipment: - robust conv. electro-motorized universal milling machine - HEIDENHAIN digital display incl. control panel * swiveling, front right * display font 0.005/0.001 mm - Electro-motorized adjustment of all axes (X/Y/Z axis) * rapid traverse in all 3x directions * Manual adjustment via handwheel also possible - Infinitely variable speed adjustment - Vertical milling head with quill adjustment * ISO 40 tool holder * Automatic tool clamping with clamping/pull bar - Robust work table incl. T-slots ... 800 x 390 mm * Number/size of T-slots 5 pieces 14H7 * Distance between T-slots 63.0 mm * Safety housing (own construction) - Coolant device incl. lower chip tray - Counter support = horizontal milling device - Halogen/machine lighting - Central lubrication incl. container - Original operating instructions

Condition: excellent (used), Year of construction: 2002, operating hours: 23,286 h, functionality: fully functional, HEIDENHAIN iTNC530 1. Capacities & Axes • Longitudinal Stroke (X): 2800 mm. • Transverse Stroke (Y): 2200 mm. • Vertical Stroke (Z): 800 mm. • Working Feeds: 35,000 mm/min. • Table Dimensions: 2500 x 1200 mm. 2. Spindle • Max. Speed: 18,000 rpm. • Tool Holder: HSK 63. 3. Tooling System • Magazine Capacity: 40 positions. • Tool Monitoring: Tool breakage probe included. Machine Dimensions (L x W x H): 12,434 x 4,700 x 4,622 mm. Supply Voltage: 400 Vac. Frequency: 50 Hz. Current Consumption: 116 A. Ljdpfxjxy Af Ho Amrsac

Condition: excellent (used), Year of construction: 2001, Description to follow! Lsdpfxjzd E Tzj Amroac

Condition: excellent (used), Year of construction: 2016, operating hours: 10,800 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, workpiece weight (max.): 4,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 10,800 h, spindle nose: HSK 100, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMF 260/11 with CELOS and Siemens 840D SL Operate in well-maintained condition. Technical data can be found in the appendix. Equipment / Features: - Siemens 840DSL Operate with Celos - HSK 100 motor spindle with 10,000 rpm - Linear drive - 5-axis - IKZ 40 bar / 600 liters - Chip conveyor - Coolant nozzle - Measuring probe - B-axis - Recessed C-axis Lasdjzbacaepfx Amrjc The machine is being sold on behalf of a customer and will be available from 10/2026. We guarantee full functionality and geometry within new machine tolerances upon acceptance at the customer's site / commissioning at your location. We will gladly plan the delivery, loading, transport, and commissioning for you, all from a single source, with our qualified service technicians. Please contact us. We are not a traditional machine dealer but support our customers in the search for and sale of high-quality used machines throughout the entire process. (Inspection, purchase, refurbishment, transport, disassembly, loading, etc.) Everything from a single source, with a guarantee and transparent processes. If you are also looking for a used DMG MORI machine or want to sell your machine in the best possible way, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 8220, Hermle UWF 801 Universal Tool Milling Machine with Extensive Accessories Manufacturer: Hermle Model: UWF 801 Year of Construction: approx. 1986 Tool Holder: SK40 Digital Readout: Heidenhain 3-Axis Digital Readout Description For sale is a Hermle UWF 801 Universal Tool Milling Machine from the in-house mold shop of a medium-sized company specializing in plastic-bonded magnetic materials. Ljdpfx Ajzd Tbasmroac The machine was used in production until the site was closed for the manufacture, processing, and maintenance of injection molds. It operated precisely and reliably until the very end and comes from a production environment with high requirements for accuracy and quality. Equipment ● Universal swiveling milling head ● Horizontal milling attachment ● Heidenhain 3-axis digital readout ● Automatic feeds ● Coolant system ● Central lubrication ● Machine lighting ● Tool holder SK40 Scope of Accessories The scope of delivery includes an extensive accessory package, including: ● numerous SK40 tool holders ● collet chucks ● collet sets ● milling arbors ● machine vice ● dividing head / rotary table accessories ● other tool and clamping accessories as shown in the pictures Condition: The machine is in good, age-appropriate condition. It was used until the plant was shut down and then stored. This offer is a private sale. No guarantee is given. Inspection by appointment is highly recommended. Location Bergisch Gladbach near Cologne Loading Loading possible by arrangement. Price €6,900

Condition: good (used), functionality: fully functional, Internal article number: 26065 Universal milling machine Lsdpfozfh Idex Amrjac Deckel FP1 Machine no.: 2101-0315 + 2-axis digital display + Stepped feed The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated warehouse with over 500 m² of space.

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA Ljdjrywgzjpfx Amroac year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Laedpfsxa Eudex Amrsc Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Additional information Equipment: Electronic handwheel Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Fixed table 1250 x 700 mm Chip conveyor Coolant system

Condition: good (used), Year of construction: 1995, 1 used universal tool and cutter grinding machine Manufacturer: Deckel Maho Type: FP 1 Year of manufacture: 1995, with CE certification Equipped with Heidenhain TNC 123 digital display Technical data: X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 340 mm Spindle mounting: SK 40 Table size: 600x210 mm Ledpfx Amozamw Isreac Spindle speeds: 40-2000 rpm Machine weight: approx. 1 t Space required: approx. 1.6x1.3x1.8 m

Condition: ready for operation (used), Year of construction: 2001, Available immediately from our location: Lsdpfezgah Eex Amreac 5-axis machining center Deckel Maho Type DMU 50 M Year of manufacture 2001 Control system Heidenhain TNC 124 5 axes (3 plus 2) Manual rotary axes with B and C tilting rotary table Axes B and C are displayed in the control system Table 700 x 500 mm Travel ranges X/Y/Z 500 / 400 / 400 mm Table load 200 kg Spindle SK 40 Spindle speeds 20 – 4500 rpm Drive power 9 / 13 kW Rotation range C 360 degrees Tilting range plus 95 / minus 10 degrees Feed rate up to 5000 mm/min Spindle speeds 20 – 4500 rpm Weight 3 tons Coolant system Price: Euro 6,500.— plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Lajdozgaf Rjpfx Amrjc Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location