Used Universal Machining Center for sale (67,626)

Condition: good (used), Year of construction: 2016, 1 used 5-axis machining center Bedpfx Absxyinnsbslr Manufacturer: Haas, Model: UMC-750, Year of manufacture: 01/2016, Read spindle hours: 4,960, Feed hours: 10,247 Travel X/Y/Z = 762x508x508 mm, 10,000/5,000 Bh Tool holder: SK40, 40-position tool changer, NC SRT table size: 630x500 mm, Maximum table load: 300 kg, Maximum swing diameter: 686 mm,

Condition: used, Year of construction: 2019, x-travel 800 mm y-travel 1020 mm z-travel 970 mm Control TNC640 B - axis 360 x 0,001 ° feed B-axis max. 50,00 U/min A - axis -185 / +45 x 0,001 ° feed A-axis max. 25,00 U/min feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206,00 / 159,00 Nm spindle diameter in front bearing 80 mm tool taper HSK-A63 tool magazin: 70 tool length - max. 500 mm tool diameter 118 mm tool diameter with 2 vacant positions 260 mm tool total weight 22,00 kg Chip to chip time 4,2 sec. size of pallet Ø 770 mm workpiece weight 800 kg interference diameter 900 mm total power requirement 35,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 7,00 x 3,50 x H3,50 m 5-axis machining center with Heidenhain TNC640 control, integrated KNOLL coolant system KF220, coolant high-pressure 23bar, coolant through the spindle, chip conveyor, Bedpjxn Amaefx Abbelr measuring probe Heidenhain TS640, electromechanical tool length check, Swivel axis calibration GSC, collision monitoring "DCM Collision", BLUM-Laser, GROB Spindle-diagnosis (GSD), kinematics-set.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 330-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Note: Bsdsxvrk Repfx Abbolr The machine will be sold without tool holders, tools, and clamping devices.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, AXILE G8 – High-Performance 5-Axis Machining Centre for Maximum Precision The AXILE G8 belongs to the top tier of modern 5-axis machining centres and is specifically engineered for demanding precision applications. Its integrated gantry design, high dynamic rigidity, and advanced automation options make it ideal for tool and mould making, aerospace, medical engineering, as well as complex single-part and small batch manufacturing. Technical highlights • 5-axis gantry construction for superior stability and minimal vibrations • High-dynamic linear drives / precision ball screws (depending on configuration) • Robust spindle (18,000–20,000 rpm, HSK-A63) with high power density • Swivel/rotary table with direct drive, perfect for simultaneous 5-axis machining • Large operating envelope for complex workpieces • Tool magazine capacity: 40–120 positions, depending on specification • Available with Siemens or Heidenhain control (depending on version), ergonomic and user-friendly • Rigid portal construction for optimal thermal stability and consistent precision Typical technical data (model dependent) • X-axis: approx. 670 mm • Y-axis: approx. 820 mm • Z-axis: approx. 600 mm • Table diameter: approx. 600 mm • Table load capacity: up to 500 kg • Spindle speed: 18,000 – 20,000 rpm • Tool holder: HSK-A63 Bsdpfxoxxh A Ij Abbelr • Magazine size: 40 / 60 / 120 tools • Control: Heidenhain TNC 640 or Siemens 840D sl (Values may vary according to year of manufacture and configuration.) Equipment & options • Full simultaneous 5-axis machining • Through-spindle coolant (IKZ) • Automatic tool measurement and breakage detection • Renishaw probing systems • High-pressure coolant system • Chip conveyor and internal enclosure rinsing • Modern safety enclosure & automation interfaces Application areas The AXILE G8 is ideal for: • Tool & mould making • Aerospace • Medical technology • Automotive prototyping • Mechanical engineering & precision component manufacturing Description This 5-axis machining centre stands out for its combination of dynamics, rigidity, and ultra-precise machining performance. Thanks to the gantry structure, the machine remains extremely stable even during long runtimes and high feed rates. Advanced thermal management ensures consistent accuracy, and the modern control system provides efficient programming and quick set-up times. The AXILE G8 is the perfect solution for companies seeking a reliable, powerful, and future-proof 5-axis machine. Currently, machines with Siemens and Heidenhain controls are in stock, also available with a 600mm table size.

Condition: used, Year of construction: 2019, Technical details: x-travel: 600 mm y-travel: 700 mm z-travel: 520 mm control: Sinumerik 840D sl MProfinet number of spindles: 3 Blodpjwywnlofx Abbsr Spindle RPM: 8000 1/min Spindle power: 40/49 kW Spindle Torque: 300/360 Nm Parts carrier / rotary tables (B-axes): 2 x 3 Table load per A-axis carrier: 1600 (x2) kg Width of A-Axis table: 1920 mm Max. dia. parts carrier (A-axis: 800 Interference dia. rotary tables: 560 mm workpiece - installed height: 400 mm tool taper: HSK-A 100 tool change unit: 120 Pos. diameter of tools max.: 260 mm tool length - max.: 420 mm weight of tools max.: 20 kg total power requirement: 170 kVA weight of the machine ca.: 40 t dimensions of the machine ca.: 8,4 x 6,1 x 3,4 m Accerories Coolant gun Probe for tool breakage and length measuring Signal lamp 3 colors Automatic door High-end 3-spindle, 5-axis simultaneous horizontal machining center with CNC controlled pendulum swivel-rotary table (A/B-axis), 3 torque rotary tables inside machine while 3 rotary tables are waiting at the setup side. Coolant through spindle 0-70bar steppless Baluff tool coding, Tool breakage control, sister tool system chip conveyor, coolant gun, coolant shower, air gun, automatic door Remote diagnosis. 3 identical machines are available. *

Condition: used, Universal Machining Center Machine type: DMG HSC 75 linear Control unit: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Operating hours: 63,133 h Spindle hours: 28,596 h Blodpfoxyx Drjx Abbjr TECHNICAL DATA: Traverse paths: X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor

Condition: used, Year of construction: 2012, x-travel 1.600 mm y-travel 900 mm z-travel 800 mm Control Heidenhein iTNC 530 table-size 1.700x850 mm taper ISO ISO 40 turning speeds 10.000 U/min workpiece Random 30 pos. table weight 2.000 Kg Bljdpfxjvtgr Io Abber rapid traverse: 20 m/min Internal cooling system 20 bar total power requirement 18 kW weight of the machine ca. 18.600 kg -Maschinenstunden 47.256 h -Spindelstunden 9.362 h

Condition: ready for operation (used), Year of construction: 2013, operating hours: 76,000 h, functionality: fully functional, Equipment: documentation/manual, The machine is powered and can be inspected and tested by appointment. A current video is available upon request. Location: Neu-Ulm Bjdpfexyp Saox Abbjlr

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SX44T-1620237CFECH, travel distance X-axis: 1,525 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HURCO, controller model: WINMAX, total height: 3,300 mm, total length: 4,500 mm, total width: 3,500 mm, table width: 660 mm, table length: 1,675 mm, table load: 1,360 kg, rotary table diameter: 600 mm, overall weight: 12,000 kg, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 622 mm, number of slots in tool magazine: 40, mount diameter: 40 mm, tool length: 250 mm, tool diameter: 75 mm, tool weight: 7,000 g, input voltage: 400 V, input frequency: 50 Hz, positioning accuracy: 0.01 mm, repeat accuracy: 0.005 mm, HURCO VMX 60 SRTI CNC Universal Machining Center - Rated current: 65 A - Power connection: 93 kW - C-axis travel: 360° - B-axis travel: ±90° - Number of T-slots: 6 Bjdpfxoxw T Hcs Abbjlr - T-slot width: 18 mm - Slot spacing: 100 mm - Maximum uniform rotary table load: 500 kg - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 100 rpm - Tool diameter with full magazine: 75 mm - Max. total tool weight: 280 kg - B-axis positioning accuracy: ±7 arcsec - C-axis positioning accuracy: ±7 arcsec - B-axis repeatability: ±7 arcsec - C-axis repeatability: ±7 arcsec - Incl. mounted zero point clamping plate, plate dimensions: 400 x 400 mm The machine is equipped with a RENISHAW 3D probe and a chip conveyor. Note: The spindle inverter has been completely overhauled. TRANSPORT INFORMATION The machine can be transported on a truck with a width of 3000 mm. Important: The item must be collected by appointment between 19th and 23rd January 2026. FCA D-76571 Gaggenau – loaded onto truck.

Condition: used, Technical details: vertical rapid adjustment: z-Achse: 1125 mm horizontal adjustment: x-Achse: 600 (+1000 elektrisch-manuell) mm cross adjustment: Frässupport y-Achse: 325 (340) mm control: Siemens 840D diameter of clamping surface: 3500/5800 mm turning diameter: max.6000 mm range of revolution per miute: Planscheibe: 1 - 12 U/min revolution per minute: Frässpindel: 1000-6000 U/min max. workpiece diameter on pallets: 6000 mm workpiece weight: 10 - 2000 kN tool taper: HSK-A-100 total power requirement: 120 kVA weight of the machine ca.: 35,0 t Annular Ring and Cylinder Machining Center Vertical special CNC machining center application: for turning-drilling and milling, grinding of annular parts (large gears, roller slewing rings, gear rims, special flanges, etc.) machine consists of two separate main groups: column unit and face plate/table unit - Feed drives via AC servomotors - cross adjustment milling support z-axis 325 (max.340) mm - Drive power of the faceplate drive 76 kW - Positioning of the table = 0,02mm What was renewed: Blsdpfx Absu Idlfebor - Axle motors were renewed (Siemens) - Central lubrication for large-diameter antifriction bearings of the turntable/spindle has been extended - partly the machine cabling - bladder accumulator and the safety valve i.D. *

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Bljdpfoxxpbfjx Abbjr Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 700 mm z-travel: 60 mm tool taper: SK40 magazine place: 30 Stück table surface area: 630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004 Bledpfxjw Dud So Abbjr *

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN iTNC 530 Table dimensions 500 x 380 mm table weight 500 Kg c-axis 0.001º ( ± 360º) 0 b-axis 180 ° rapid traverse X-axis 80 m/min feeds 50 m/min spindle turning speed range 18.000 U/min spindle taper BT- 40 spindle drive 30 kW Bsdpfx Abjxluf Aobslr Internal cooling system 40 bar handwheel HEIDENHAIN HR-410 Working hours 51.770 h Spindle hours 14.627 h total power requirement 50 kVA weight of the machine ca. 6,5 t

Condition: good (used), Year of construction: 2012, EiMa ALPHA T CONTURA 5-Axis Universal Machining Center Year of manufacture: 10/2012 Control system: SIEMENS 840D sI 720 NCU Machine number: 11744 Travel axes: X – 5,029 mm / Y – 1,202 mm / Z – 772 mm B-axis travel: ±121° C-axis travel: ±211° Feed rates (X/Y/Z): 60/60/40 m/min New milling spindle installed on 19.05.2025 Bedpfx Aex Acpwebbelr Equipment: - 5-axis fork-type head - Milling spindle 15 kW / 12 Nm / 24,000 rpm - For milling, drilling, sawing - Disc-type tool changer, 12 tools, HSK-63 F - Pick-up station for saw blade - Spindle cooling unit - Fluidtech minimum quantity lubrication system - Partition wall for pendulum machining - Vacuum clamping plate by WITTE, 2,100 mm x 1,200 x 42 mm - Chip conveyor - Extraction unit by LOSMA NEWTON N6 Scope of delivery includes: approx. 35 tool holders / operating manual / documentation For equipment, technical data, and transport drawings – see PDF. Images, content, and specifications are provided without guarantee and are non-binding. All additional accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The delivery includes only those accessories expressly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier, loaded truck) D-97944 Boxberg Packaging only Delivery: immediately Subject to prior sale / Payment due immediately upon conclusion of sale

Condition: good (used), Year of construction: 2017, operating hours: 13,864 h, functionality: fully functional, machine/vehicle number: S844W-16201A7DFECH, travel distance X-axis: 2,134 mm, travel distance Y-axis: 865 mm, travel distance Z-axis: 762 mm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 18 m/min, controller manufacturer: HURCO, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, table width: 865 mm, table length: 2,184 mm, table load: 2,268 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 4,381 h, number of slots in tool magazine: 40, mount diameter: 40 mm, tool length: 300 mm, tool weight: 7,000 g, input voltage: 400 V, positioning accuracy: 0.001 mm, repeat accuracy: 0.005 mm, Equipment: chip conveyor, HURCO VMX 84 Swi CNC Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 50 kVA - Rated current: 72 A - Travel range A-axis: ±90° - Spindle nose to table dimensions: 147 - 909 mm - Positioning accuracy B: ±10 seconds - Repeatability B: 10 seconds - Feed rate X and Y axes: 15,200 mm/min - Feed rate Z axis: 13,500 mm/min - Rapid traverse X and Y axes: 18 m/min - Rapid traverse Z axis: 13.5 m/min - Rapid traverse B axis: 33.3 m/min - Max. tool diameter with adjacent pockets empty, tool cover removed: 75/120 mm - Tool change time: 2.5 sec - Chip-to-chip time: 21.6 sec The machine is equipped with a 3D probe, coolant system, and chip conveyor. Transport note: Note: The machine can be transported on a low-loader with a transport width of 3,000 mm. Attention: The item must be collected on a binding appointment to be scheduled between 19 and 23.01.2026. FCA D-76571 Gaggenau – loaded onto truck. Bljdpfjxw R Tmsx Abbjr

Condition: used, Year of construction: 2007, Technical details: x-travel: 1000 mm y-travel: 1000 mm z-travel: 500 mm B-axis (table): 360 ° spindle taper: HSK A63 working spindle range of revolution per minute : 15000 U/min rotary table: 260 mm control: Andronic 2060PKM feed: 1 - 5000 mm/min rapid traverse X,Y: 15 m/min. rapid traverse Z-axis: 12 m/min total power requirement: ca. 42 kW weight of the machine ca.: 6,0 t dimensions electric cabinet LxWxH: 2,4x0,6x2,2 m dimension machine xH: 3,5x2,4x3,2 m Blsdpfx Asu Idm Nebbjr 5-axis BAZ in parallel kinematics suitable for prototypes. i.D. *

Condition: good (used), Year of construction: 2013, Ref. -No.: 10450 Manufacturer: SHW Type: UNISPEED 5 Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 32XX X-Travel: 2000 mm Y-Travel: 2300 mm Z-Travel: 1300 mm B-Axis: 360 ° C-Axis: 360 ° W-Axis: 1500 mm Table Load: 15000 kg Max. Tool Weight: 25 kg Max. Tool Length: 500 mm Max. rotary table diameter: 1600 O Table speed range: 5 min/-1 Tool Taper: HSK 100 Tool Piece Magazine With: 150 Pcs./pcs. Turning Speed Range - Stepless: 22 - 8000 RPM Max. Torque: 40 Nm Feed Speeds X/Y/Z Axis: 2 - 30.000 mm / min axes: 5 Rapid Travel X/Y/Z: 30.000 mm / min acceleration: 2 m/s² Dimensions Of The Machine Ca.: 8,4 x 7,1 x 5,3 m Operating hours: 42.499 H Tool change time: 10 s Further information: automatic universal milling head, 360 x 1°; 180 x1° compact coolant system, make Knoll, type KF150/950 high pressure pump belt filter coolant temperature control Bsdpfx Aexxpanjbbelr Blum laser measuring system Renishaw RMP 60M infrared measuring system 140 tool holders HSK 100 included Machine can be inspected under power by appointment.

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Bljdpfsvvi Nzex Abbsr

Condition: like new (used), A cabinet with 3 drawers, ejector see pictures Blsdpfx Aboxz Rx Dsber

Condition: ready for operation (used), Year of construction: 2005, Available immediately from CH location : 5 axes machining center Reiden Type Reiden BRF 1 Year of construction 2005 Spindle renewed in 2022 ( 28.000.-Euro ) CNC control Heidenhain iTNC 530 Electronic handwheel Table diameter 800 mm Table load 800 kg X axis 1200 mm Y axis 600 mm Z axis 700 A axis minus 180 pkus 180 degrees Bljdpfoxy Rafox Abbjr B axis minus 90 plus 90 degrees SK 40 Magazine 72 places IKZ 20 Bar Number of controlled axles 5 Power on the spindle 25 kw Spindle speeds 0 - 6300 rpm Feed x axis 20000 mm / min Feed Y axis 20000 mm / min Feed Z axis 20000 mm / min Coolant device Chip conveyor Weight 9 to At a price of Euro 36.500.---plus VAT ex location

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 Control: HEIDENHAIN TNC 530 Spindle taper: SK40 Operating hours: 54,981 h Travel paths: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: - NC rotary table (Nikken) - Large NC rotary table - Tailstock - Electronic handwheel Inspection Viewing under power is possible by prior appointment at any time. Condition: Used condition appropriate to age and previous usage. Bjdsxxamxspfx Abbolr Known defects: - Ball screw of the X-axis worn / overhaul required - Y-axis likely cable or motor defect Repairs carried out: 2017 – Retrofit kit for handwheel 2022 – Replacement of screw conveyor in chip conveyor 2024 – New cylinder/linear guide for tool magazine 2024 – New monitor Further defects cannot be ruled out. Important note / disclaimer The machine is expressly sold as defective, without warranty, without guarantee, and with the exclusion of any liability for material defects. All technical details have been provided to the best of our knowledge, but are not binding. No responsibility is taken for completeness, accuracy, or timeliness of the information. The sale is made as seen and excluding any subsequent negotiation.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: MILLPLUS iT HEIDENHAIN, table load: 800 kg, 5-axis simultaneous machining center! TECHNICAL DETAILS X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Table size: 1,500 x 800 mm Table load capacity: 800 kg Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Spindle taper: SK 40 Blsdexwlgzjpfx Abbsr Tool changer: 60 positions MACHINE DETAILS CNC control: MILLPLUS iT HEIDENHAIN Total power consumption: 44 kVA Dimensions & Weight Footprint: approx. 3.5 x 2.65 x 2.65 m Machine weight: approx. 10.5 t EQUIPMENT B-axis (-120 / +30) NC rotary table integrated into fixed table Direct measuring system 3D probe infrared HEIDENHAIN TS 640 Coolant system 40 bar, 600 l Rinsing gun Chip conveyor 3D Quickset software Note: The machine is fully functional. The rotary table and X-axis produce noise.

Condition: excellent (used), Year of construction: 2005, Type: DMU 80T2 Year of manufacture: 10/2005 Control: Heidenhain 3D path control iTNC-530 Bodoxz Rhlspfx Abbslr Clamping surface: 1250 x 700 mm (fixed table) Working area: X: 980 mm Y: 630 mm Z: 630 mm Spindle speed range: 20 – 12,000 rpm Feed rate: 0–10 m/min Tool changer: 32 magazine positions SK 40 Machine hours: Control on: 33,814 h Machine on: 29,764 h Program run: 8,237 h

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Blodpovvi Rfefx Abbjr

Condition: good (used), Year of construction: 2017, operating hours: 12,141 h, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller model: Heidenhain iTNC640, spindle speed (max.): 15,000 rpm, We offer in good condition Hermle C250U with following options: Heidenhain TS460 touchprobe Blum Laser Bjdpfx Abjxqd S Njbelr Internal coolant 40 bar with paperbelt filter Air true Spindle