Used Twins for sale (3,019)

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, input voltage: 400 V, Mercodor Shredder ZM 44 with a cutting area of 600x380 m with 7.5 KW drive, knife assembly 19 mm, 3 hooks. Kdodpfjvupbzsx Aa Ijn

Condition: used, Year of construction: 2023, Shrink tunnel 50 Twin with double blower Equipment - Manual height adjustment of the conveyor belt - Digital control panel with 9 selectable and personalized programs - Possible selection of automatic roller rotation - Adjustable air flow - Cooling program - Outfeed roller conveyor as standard - Two independent chambers with temperature control Technical data - Connected load - 380/400 V / 3 ph - Tunnel inlet dimensions - 450 x 210mm Kdodpfx Aaouaklme Ion - Max. Product dimensions - width 400 mm / height 190 mm - Machine dimensions - 2,130 x 800 x 1,460 mm - Weight - approx. 260 kg ALSO AVAILABLE IN INNOX VERSION !!!

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Kdedpfx Asx Hifvea Ion

Year of construction: 2001, operating hours: 64,499 h, condition: good (used), Conical screws, approx. 110 kg/h. A.C. motor 30.0 kW. New motor, 64,499 operating hours. Kodpow Hy Uusfx Aa Iedn

Condition: new, Year of construction: 2025, Features: - Overband Neodymium Magnetic Separator - HP - Dust suppression Ksdpfxew Elbde Aa Iedn - Conveyor belt speed control - Self-propelled chassis for semi-trailer

Condition: refurbished (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, Features: - Cutting unit Kodow Elm Tjpfx Aa Iodn - Side wall extension in cutting area +300mm (one-piece) - Flat base plate on crawler chassis - Dust suppression - Engine compartment fire extinguishing unit

Condition: used, • Front side: 2 boxes for the films • 2 flaps for vacuum • Dimensions: W 2,450 x L 3,000 x H 2,650 mm • For production of double mirrors or laminated glass Kodpfx Aaewc Abvs Iedn • Price on request

Condition: used, functionality: fully functional, OMS FC 330 R double mitre saw for wood and aluminium – used, after inspection Specification: • Condition – used, after inspection/service • Manufacturer – OMS • Model – FC 330 R • Main motors – 2 x 2.2 kW • Max cutting length – 302 cm • Min cutting length – 36 cm • Max cutting cross-section – 95 x 150 mm (at right angle) • Max blade diameter – 330 mm (currently 315 mm installed) • Extraction ports – 60 mm diameter • Angle cutting range from -45° to +45° (right, left) • Vertical clamps for the cut workpieces Kodey Inq Hspfx Aa Ijdn • Weight – approx. 600 kg • Dimensions – 352 x 80 x 135 cm (L x W x H) Additional information: • The photos shown reflect the actual condition of the item for sale • Possibility to switch on and test the machine on site • The auction price does not include VAT or transport costs Financing and transport: • We organize transport via MDD fleet, courier companies, or external carriers • Financing solutions available in the form of leasing or lease loan

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets Kjdpfxoyhd Dbj Aa Isdn - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Condition: used, RSA center for high-performance cutting, deburring, cleaning, drying and stacking for steel and stainless steel tubes. Scope of Supply: - 1 RSA high-speed precision saw model RASACUT NC 1500 - 1 Transfer system between the RASACUT precision saw and the RSA tube feeding system 1500 - 1 RSA tube feeding system 1500 - 1 RSA cleaning system RASACLEAN ET 1500 Including: - 1 RSA drying system TURBODRY - 1 RSA RASAPORT 1500 PR system High production High precision Very short setup times Easy handling Easy machine connection RSA High performance Saw RASACUT TWIN NC 1500: Fast and Precise Round diameter: from 10 to 40 mm Kdodpfxsymapqe Aa Ijn Square size: from 10x10 to 40x40 mm Wall thickness: from 1 to 3 mm Material: steel and stainless steel Original lengths: 6,200 mm Fixed length cutting and deburring: from 200 to 1,500 mm Round diameter: from 10 to 40 mm Square size: from 10x10 to 40x40 mm Wall thickness: from 1 to 3 mm Material: steel and stainless steel Original lengths: 6,200 mm Fixed length cutting and deburring: from 200 to 1,500 mm

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction spigot diameter 2 x 220 mm Kodpsqy E Rlefx Aa Ijdn rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Year of construction: 2011, condition: ready for operation (used), Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories. Kdjdpfx Aashtvmho Isn

Condition: good (used), Year of construction: 2007, functionality: fully functional, NAKAMURA WY250 SUPERMILL LATHE, YEAR 2007, OPERATIONAL, WITH DOUBLE Y-AXIS - FANUC 31iA2 CNC control - Main spindle bar capacity: 65mm, power: 18 kW, ASA 6, 4500 RPM - Sub-spindle bar capacity: 51mm, power: 11 kW, ASA 5, 5000 RPM - Live tool power: 7 kW with 40 Nm torque on both turrets (65mm throat, SUPERMILL) - Y-axis on both turrets (Y-stroke upper +50/-50 mm; Y-stroke lower +20/-50 mm) - Part catcher type G - Distance between spindle noses: 870 mm - Maximum turning diameter: 225 mm - Rapid traverse Z: 36 m/min, rapid traverse X: 18 m/min - Enlarged 500L coolant tank with chip conveyor - Turret coolant pumps: GRUNDFOSS CRK4-100/10, double stage, 3-12 bar with filters - Coolant wash over spindles - Air blow and coolant wash through sub-spindle - Auto shut-off - 3-color stack light - NT Nurse axes load monitor - IEMCA MASTER 880 bar feeder, year 2003 - Set of toolholders and collet holders as follows: Ksdpfx Aaeyrb Tns Iodn Supplied with the machine: 4 external toolholders 4 dual opposed toolholders 6 boring bar holders 1 H32 cutoff blade holder 4 radial live toolholders (brand HEIMATEC) 4 axial live toolholders 1 Bellegrandi collet holder type MSCNT70-A6” for BA and BD series, size 70 (complete with mounting sleeves, main spindle side) 1 Bellegrandi collet holder type MSCTNR70-A5” for BA series, size 70 (complete with spring ejector, sub-spindle side) Complete Hand Jaw set for the part unloader

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 75 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 7.5 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher wagon with 10 clamps Blade carriage speed 1-120 m/min Pusher speed 60 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Ksdsv Amx Tepfx Aa Isdn

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Kodpfsyg Eghsx Aa Ijdn Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Condition: excellent (used), functionality: fully functional, Risco RS 750 Twin-Shaft Paddle Mixer with Mast Lifter Manufacturer: Risco S.p.A. Model: RS 750 Power supply: 400 V, 3 phase, 50 Hz Power: 7.8 kW Capacity: 750 l Weight: 1010 kg Dimensions: 2760 × 1170 × 1720 mm Loading system: Integrated Nieros mast lifter Kdedpfsyt Sahex Aa Ion The Risco RS 750 twin-shaft paddle mixer is a robust and reliable machine designed for industrial food production. It features two counter-rotating shafts with paddles, ensuring intensive yet gentle and even mixing of various masses—meat, vegetable, cheese, or confectionery. Thanks to its large 750-liter capacity, it is perfectly suited for medium and large processing plants. The unit is integrated with a professional Nieros (Heinrich Niederberger KG) mast lifter, enabling automatic loading of raw materials directly from standard 200-liter meat trolleys.

Condition: used, Spacing between units up to 3.5 m, maximum disc diameter 350 mm, cutting width approx. 150 mm, possibility of cutting with a single unit, cutting angle adjustment range -45/+45 degrees Kdedexyzlxspfx Aa Ien

Condition: new, capacity: up to 7 000 kg/h electric outlet: 3kW 400V 50Hz (3 phases) fuse: 16 A dimensions: length: 4 435 mm width: 2 250 mm height: 2 160 mm insertion resp. discharge height: 1 430 mm belt width: 1 100 mm spread width: 320 - 870 mm Kodpfx Asdix N Hsa Iodn spread height (infinitely adjustable setting): 10 - 50 mm weight: 3 400 kg material: 1.4301 / AISI 304 juice yield : up to 80 % belt Speed: 1,2 – 4,5 m/min contact time: 1,5 - 6 min water consumption for cleaning: 20 l/min connections: sewage connection: Ø 75 mm juice discharge connection: DN 40 juice discharge height: 200 mm sewage discharge height: 100 mm pomace discharge height: 800 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Condition: new, capacity: up to 3 000 kg/h electric outlet: 3,5kW 400V 50Hz (3 phases) fuse 16 A dimensions: length: 3 720 mm width: 1 730 mm height: 2 110 mm insertion resp. discharge height: 1 430 mm belt width: 660 mm spread width: 220 - 440 mm spread height (infinitely adjustable setting): 10 - 40 mm weight: 2 200 kg material: 1.4301 / AISI 304 Kdjdpfx Aaodix I Us Isn juice yield : up to 80 % belt Speed: 1,2 – 4,5 m/min contact time: 1,4 – 4,2 min water consumption for cleaning: 10 l/min connections: sewage connection: Ø 75 mm juice discharge connection: DN 25 juice discharge height: 130 mm sewage discharge height: 50 mm pomace discharge height: 810 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Condition: excellent (used), Year of construction: 2022, operating hours: 2,330 h, functionality: fully functional, machine/vehicle number: 7535, overall weight: 28,500 kg, power: 405 kW (550.65 HP), Mobile Shredding Plant LINDNER URRACO 4000 DS (self-propelled) Kdsdsxyq Ipjpfx Aa Isn Discharge conveyor with overband magnet, dust suppression system, compressed air compressor for machine cleaning SF12.9 shaft pair with accessories Pre-breaker shaft pair with accessories available upon request

Condition: good (used), max. saw blade diameter: 400 mm spindle diameter: 30 mm adjustable blade up/down max. cutting height: 130 mm Kdjdpfx Aoxvmw Soa Isn min. cutting width: 250 mm max. cutting width: 2350 mm electric saw spacing adjustment motor power: 2 x 4 kW feed carriage motor power: 0.75 kW

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Risco RS 750 Twin-Shaft Paddle Mixer Manufacturer: Risco S.p.A. Model: RS 750 Serial number: 1205004 Year of manufacture: 2007 Power supply: 400 V, 3 phase, 50 Hz Power: 7.8 kW Capacity: 750 l Kdodpfjx E Darox Aa Isn Weight: 1010 kg Dimensions: 2760 × 1170 × 1720 mm The Risco RS 750 twin-shaft paddle mixer is a robust and reliable machine designed for industrial food production. Equipped with two counter-rotating shafts with paddles, it ensures intensive yet gentle and uniform mixing of various masses – meat, vegetable, cheese or confectionery. With a large 750-litre capacity, it is ideal for medium and large-scale production facilities. The construction offers stable operation, high efficiency and consistent mixing results. The unit is designed for ease of use and for integration with processing lines.

Condition: excellent (used), functionality: fully functional, Alco Equal Mix Double Shaft Paddle Mixer Manufacturer: Alco Model: Equal Mix Power supply: 400 V Overall dimensions: 3500 × 1550 × 3000 mm Mixing chamber capacity: 1700 × 1050 × 900 mm Top inlet with pneumatically actuated valve Bottom outlet with pneumatically operated discharge valves Digital display of operating parameters Standard bin lifting system with integrated weighing unit Kdodpfxsyahwcj Aa Isn The Alco Equal Mix double shaft mixing machine is designed for intensive and uniform mixing of various food products, especially meat masses. The dual mixing shafts ensure excellent product homogeneity and short cycle times. The machine is equipped with pneumatic systems for easy loading and unloading, as well as an integrated weighing unit for precise process control.

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: 23 03 28 / 1, functionality: fully functional, TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing - equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit - free space within the working area by guiding the belts over an upper installed deflection unit - open and close of upper grinding belt hoods by pneumatic cylinder - accident protection by movable grinding belt cover - selectable for front and rear belt - preselection by 2 potentiometers in the control panel and frequency inverter in high-line version - with limit switch/operation by movable grinding belt cover - tension of each grinding belt by pneumatic belt tension device - the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw - frequency converter with brake chopper unit for braking in max. 10 s - grinding belt speed v = 4 - 25 m/s - emergency-off release line in the working area - with a sliding table of aluminum-pipe installed between the machine stands - table movement back and forward by means of 4 soft prism rolls - max. workpiece weight 100 kg - motorized table height adjustment by spindles and roller guiding's until max. 780 mm - spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min - machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground) - with a temporary traverse, to remove after adjusting and bolting to the ground - pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls - dust extraction tube on the left hand machine stand with D = 200 mm - necessary extraction power = approx. 3400 m3/h - working area to be illuminated by means of 2 LED lights, adjustable in 3 steps Kdsdpjt Hvkvefx Aa Ion ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm Filter included. Additional info in pdf attached.

Year of construction: 2025, operating hours: 600 h, condition: like new (used), functionality: fully functional, Maximum height 160 mm / 6 5/16" Maximum width 700 mm / 27-1/2" Saw shafts are fixed. Hydraulic driven, knurled feed rollers are available. The top pressure roller is hydraulically adjustable. When the full speed range of the machine is used, up to 20 meters / 65 feet of cutting can be achieved per minute. TECHNICAL SPECIFICATIONS STANDARD METRIC LENGTH 10'-5" 320 CM WIDTH 7'-5" 230 CM HEIGHT 5'-2" 160 CM APPROXIMATE WEIGHT 8,600 lbs 3900 KG SAW SHAFT MOTORS 2 × 50 KW 2 X 37 KW SAW DIAMETER 11 13/16" 300 MM MINIMUM ENTRY LUMBER WIDTH MIN: 4 3/4" MIN: 120 MM MAXIMUM ENTRY LUMBER WIDTH MAX: 27 1/2" MAX: 700 MM MAXIMUM LUMBER CUTTING HEIGHT MAX: 6 1/4" MAX: 160 MM Ksdpfx Asyvhp Ssa Isdn MIN. & MAX. EXIT LUMBER CUTTING WIDTH MIN: 1/2" MAX: 4 3/4" MIN: 15 MM MAX: 120 MM MIN. LUMBER LENGTH MIN: 3 FEET MIN: 90 CM MAX. FEED SPEED PER MINUTE MAX: 65 FEET / MINUTE MAX: 20 M/MIN