Used Tube Pathway for sale (1,992)

Condition: excellent (used), Year of construction: 2010, Ultrafiltration plant for fermented products 3 Main items: 1) Thermization unit 2) Ultrafiltration (UF) for fermented milk 3) Cooler and Silo. The line is used to produce Quark/Skyr. The thermization and ultrafiltration unit are also suitable for producing other fermented and concentrated dairy products such as: Skyr, Mascarpone, and Double Cream cheese. Key data: - Input: 3,500 - 5,000 liters per hour of fermented skim milk, full-fat milk, or enriched products. - Concentration factor: 1.8-2.5 1) Thermization unit Complete skid-mounted thermization unit. Flow rate: 3,500 up to 5,000 liters (depending on the product). Manufacturer: Tetra Pak Temperature cycle: Input: 21-30 °C (incubation temperature) -> recuperation (permeate cooler) -> thermization at 55/60°C or pasteurization at 72/95 °C -> holding -> output to ultrafiltration at approx. 45 °C. Complete unit including: * Stainless steel frame in which everything is pre-assembled. * Closed balance tank with spray bowl. * Centrifugal product pump, stainless steel casing, flush seal, type: LKH. * Plate heat exchanger, 4 stages, new, Tetra Pak, Clip6-SR Model. * Control box with all connections for sensors and pneumatic valves. * Holding tube for 5,000 liters per hour, adjustable by connecting more or fewer tubes: 30 seconds up to 180 seconds in 9 stages. 2) Ultrafiltration unit Manufacturer: Tetra Pak Type: Tetra Alcross US P&F Serial number: T5845810096 Year: 2010 Capacity: Input up to 5,300 liters/hour Description: Concentrates yogurt or fermented milk to achieve the desired composition and texture. The UF separates the product into retentate and permeate. The retentate is the product, with proteins and fat (if included) concentrated. The advantage of this design of UF (compared to spiral-wound UF and separators) is that it is suitable for fermented products with and without fat. Also, all proteins are concentrated (even whey proteins). This results in high pressures in the system; filtration can only be achieved with a plate and frame filtration system with flat FR60pp filters and rotary piston circulation pumps. Some example products that can be made with this system: Input: skim milk 9% TS -> output approx. 16% TS (Skyr). Input: 20% TS including fat -> output: cream cheese or mascarpone. Input: pre-concentrated fermented skim milk up to 12% TS -> output up to 18% TS (Quark). The limiting factor is the permeate output. Approximate permeate per stage: Stage 1: 1100-1755 liters/hour, 13.5 m2 filters. Stage 2: 675/1170 liters/hour, 9 m2 filters. Stage 3: 320/585 liters/hour, 4.5 m2 filters. Stage 4: 300/585 liters/hour, 4.5 m2 filters, 15 bar. Filter: plate and frame type, manufacturer: Tetra Pak - DDS, model: M37 Complete unit including: * Stainless steel frame. * 2 balance tanks with spray bowl (feed and permeate return). * Feed pump Tetra LKH. * 4 circulation loops including circulation pumps. First stage with centrifugal pump, 3 stages with Waukesha 320-U2 rotary piston high-pressure pumps. Last stage up to 15 bar pressure for highly viscous products. 3) Quark silo, cooler, and pump. Manufacturer: Schwarte-Milfor Type: Quarksilo Serial number: 3580 Year: 2011 Capacity: 5,000 liters Description: Robust conical design for very viscous products. Insulated. Hermetic, ultra-clean with sterile air. Sensors for level and temperature. On inlet: Kodpfx Asz Imdajkpenc - Plate cooler Manufacturer: Tetra Model: Clip line C6 Thermal cycle: 45 -> approx. 18°C

Condition: used, all stainless steel water circulation net belt length ± 10.500 mm net belt width 900 mm adjustable speed Ksdpfxsz Imvie Akpenc lifting unit with electrical hoists dimensions (l x w x h): ± 11.500 x 1.600 x 4.000 mm + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW + Conveyor belt with flights belt width: 800 mm distance between flights: 190 mm height of flights: 50 mm

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 030536, turning length: 2,000 mm, center width: 2,000 mm, center height: 330 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 18,500 W, The Saeilo Contur Dialog H 66/2000 is a used cycle lathe, manufactured in 2004 (first commissioning 02/2004), equipped with a Siemens Sinumerik 810D control system. With a center height of 330 mm and a center distance of 2,000 mm, it is designed for longer shafts that are machined individually or in small batches. It can be operated manually or programmed for cycle operation. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2004 - Control system: Siemens Sinumerik 810D - Center height: 330 mm - Center distance / turning length: 2,000 mm - Swing diameter over slide: 400 mm - Spindle speed max.: 2,500 rpm - Spindle drive: 18.5 kW EQUIPMENT AND ACCESSORIES - Chip conveyor Saeilo TTM-325 (hinged belt) - Turning chuck - Turning and clamping tools - Setup tools - Operating manual Contur Dialog H 56/66/66G CONDITION During our inspection on 01.10.2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION Suitable for shafts, spindles, and tube parts up to 2 m in length in the tool and maintenance sector, where many individual parts are required. Kjdpfx Aez H Ugaokpjnc LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection by appointment. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact details for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: used, Year of construction: 2016, Overview This ABE Portable CIP unit is a two-tank clean-in-place system built in 2016 by American Beer Equipment (USA) for craft breweries. A wash tank and a sanitize tank of 150 l each, both electrically heated and temperature-controlled, a stainless steel centrifugal pump and a manual valve manifold are mounted together on one stainless steel frame. The unit is still installed in a craft brewery in Spain, which is ceasing operations. Technical data - Manufacturer: ABE - American Beer Equipment (USA) - Model: Portable 2x150 L - Year of manufacture: 2016 - Machine type: portable 2-tank CIP unit (wash and sanitize) - Tank volume: 2 x 150 l - Operating mode: manual Ksdpfx Aksz Hzgyopsnc - Electrical supply: 3-phase - CIP pump: Bominox stainless steel centrifugal pump, 2,900 rpm - Water inlet and drain connections: 1-1/2" Tri-Clamp - Tank overflow: 1" tube Equipment - Wash tank and sanitize tank, 150 l each, stainless steel, each with electric heating element and low-level sensor - Control panel with two digital temperature controllers, pump and heater switches and emergency stop - Bominox stainless steel centrifugal pump with valve manifold: recycle, tank outlet and system outlet valves - Stainless steel frame carrying tanks, pump and piping - Operator's and technical manual (English) with electrical diagrams and parts lists Condition Used, installed and in operation until the brewery closes. Inspection on site possible on request. Availability Immediately. Location: Spain.

Condition: new, Year of construction: 2025, For sale: brand new / unused ZEISS Primovert inverted phase contrast microscope, supplied as a complete factory-configured kit in the original ZEISS packaging. This is one of 5 identical new Primovert units available. The complete configuration includes: ZEISS Primovert microscope stand, ref. 415510-1100-000 - Binocular tube - 4-position objective turret - Specimen stage 200 x 239 mm with metal stage insert - Binocular tube 45°/20 - Eyepieces 10x/20 Br. foc. - External power supply 100-240 VAC / 50-60 Hz - Dust cover - Original accessories and documentation ZEISS LD Condenser 0.4, ref. 415510-1700-000 - Working distance 55 mm - Suitable for objective magnifications of 4x to 40x Objectives included: ZEISS Plan-Achromat 4x/0.10 Ph0 Ref. 415500-1619-000 Working distance 12.0 mm ZEISS Plan-Achromat 10x/0.25 Ph1 Ref. 415500-1605-001 Working distance 4.4 mm ZEISS LD Plan-Achromat 20x/0.30 Ph1 Ref. 415500-1614-000 Working distance 4.6 mm at D=1 mm ZEISS LD Plan-Achromat 40x/0.50 Ph1 Ref. 415500-1617-000 Working distance 2.7 mm at D=1 mm Phase contrast components included: Phase annulus Ph 0/0.4, ref. 415510-1810-000 Phase annulus Ph 1/0.4, ref. 415510-1811-000 3-position phase slider, ref. 415510-1805-000 Also included: ZEISS LED illumination for Primovert Ref. 415510-1201-001 Condition: New / unused The microscope is supplied in its original ZEISS box with original protective foam, documentation, and accessories. Kodpfez E A Hfjx Akpjnc The unit has not been used in a laboratory setting. 5 identical units available. Available immediately from stock in Belgium. Worldwide shipping available. Please contact us for additional information, pictures, shipping quotation, or a formal offer.

Condition: good (used), Solar Fence | Mobile Solar Frame, Used Total length: approx. 3,530 mm Total height: approx. 1,700 mm Modular system: The frame can be individually configured and adapted to the size of your solar modules and can be extended at any time with additional elements. Consisting of EACH: 04 x A - Shelf upright, used Shelf system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Frame profile: 100|25 Profile dimensions: 100x100x2.5 mm Adjustment grid: 50|50 mm incl. cross and diagonal braces, Foot plates (182x147x6 mm) The uprights are pre-assembled (bolted framework) 1,510 mm high 610|200 mm deep 08 x Solid rubber heavy-duty roller, used Design: Double-stop swivel roller Roller Ø: approx. 160 mm Roller width: approx. 40 mm Roller material: Solid rubber Plate dimensions: approx. 135 x 110 mm (W x D) Hole Ø: approx. 11 mm 08 x Pallet racking beams, used Shelf system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Box profile: 89 x 50 mm Beam type: SLO 089|2 Agraffe: 5 HK 1,140 mm clear width 16 x Locking pin Dexion, used Type: Speedlock P90 Material color: sendzimir galvanized 04 x Square tube, new Design: hot-dip galvanized Customs tariff number: 73066192 Steel grade: S 235 / S 275 Cross-section: 50x50x2 mm Weight: 3.25 kg | per meter Length: 950 mm Notch on both sides: 50 mm 08 x Spacer sleeves made of plastic M8, 20x30x8.5 mm, white, new 08 x Steel plate, new Dimensions: 42x50x1.20 mm Material color: sendzimir galvanized Ksdeznxf Sspfx Akpenc 01 x Screw material Upon request, you will receive a complete, coordinated photovoltaic system from our trading partner Erneuerbare Energien Ostfriesland with the following accessories: Growatt Neo Micro Inverter 800 Watt incl. Wifi, incl. 5 m AC Connection cable, new Growatt Battery Noah 2000 Watt incl. Wifi (Stackable up to 8 KW), new Solar Module DAS Solar Bifacial Full Black 450 Watt, new Photovoltaic Cable 2 x 3 m 6 sq mm Red/black incl. MC4 connector, new We will gladly arrange the contact for you. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional desired transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, mileage: 86,041 km, power: 162 kW (220.26 HP), first registration: 05/2005, overall weight: 10,500 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, total length: 6,900 mm, total width: 2,300 mm, total height: 2,910 mm, Equipment: ABS, parking heater, A very well-maintained MAN L2000 city fire engine (LHF 16/12) from the Berlin Fire Department. Water tank: 1200 liters + foam tank: 100 liters, Rosenbauer 16/8 rear-mounted pump with quick-attack nozzle on the right, hose reel at the rear, and partial equipment load. Knodsz N Nl Djpfx Akpec Tilting crew cabin with auxiliary heater and heated mirrors, differential lock on the rear axle, and cruise control. Regularly maintained without any pending repairs, recently inspected with lubrication and new air dryer filter. The engine runs smoothly and the transmission shifts well; a very maneuverable vehicle with good tires. +++ Valve for new level adjustment with flange is missing in the filling tube – can be obtained or a price reduction will be applied +++. Otherwise, the vehicle is complete and ready for operation. + 160 +

Condition: defective spare-parts repository (used), Year of construction: 2009, For sale is a defective Trumpf 7036 tube bending machine, manufactured in 2009. The screen remains blue (blue screen error). Ksdpfxjz Rknpj Akpjnc

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension, Beavertail rear, Ramp Equipment: - Spare wheel - Shovel holder - Loading ramp Net: €5,621.85 / Gross: €6,690.00 Article number: VB4235401810.02 Technical data: • Brand: Variant • Model: 3518 B4 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: No first registration Kjdpfxoyyw N Aj Akpenc • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 400 x 180 x 30 cm • External dimensions (L x W x H): 600 x 234 x 168 cm • Loading height of the floor: 30 cm • Permissible total weight: 3,500 kg • Tare weight: 815 kg • Payload: 2,685 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced aluminum diamond-plate fenders, walkable • Lateral grid steps, non-slip • Screen-printed plywood floor, 18 mm, non-slip and waterproof • Extremely stable, welded grid tube frame • Frame completely hot-dip galvanized • Steel loading ramp, upright on shaft, 130 cm • Stable eccentric locks • Support blocks on loading ramp • Very low chassis for a low loading angle • Beavertail rear / low loading for work platforms and excavators • Excavator bucket holder at the front • Spare wheel, mounted under the excavator bucket holder • 10x lashing eyes mounted in the outer frame (1000dAN/kg) • 8x lashing points on the inside • Parabolic axle from KNOTT • Parabolic axle for absolute heavy-duty use • Reverse automatic • KNOTT inertia brake and parking brake • Lockable tow hitch • Spare wheel, mounted under the excavator bucket holder • Very stable, bolted V-drawbar, REINFORCED • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear marker lights at the rear with rubber arm • Heavy-duty support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Kedpfozlbpbox Akpenc Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW Ksdoxab E Sopfx Akponc weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: as good as new (ex-display), Year of construction: 2025, tube diameter 10.0 - 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 1.30 U/min voltage 400 Volt total power requirement 1.5 kW weight 110 kg range L-W-H 400 x 450 x 570 mm Exhibition machine - like new never been used (!!) Special price upon request Knjdpfxjxab Hvo Akpoc - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: used, Year of construction: 2025, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V Kodpfx Aksxcg Evepjnc total power requirement 2,5 /3,3 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,2 x 0,75 x 1,4 m Exhibition machine, unused. Belt sander with - 40 grit sanding belt - 8 sanding rollers

Condition: used, This listing is for a Cole Parmer Masterflex L/S 7554-95 Peristaltic Pump. The unit is in full working condition and is ready for immediate release. This unit is supplied with no pump head. The Cole Parmer MasterFlex L/S 7554-95 is a high-performance peristaltic pump designed for precise and reliable fluid transfer across a range of applications in laboratory, pharmaceutical, and industrial settings. Its versatile design and robust features make it an essential tool for any fluid handling needs. Kjdpfexxx U Uex Akponc Features: - Versatile Applications: Ideal for transferring a wide range of fluids, including delicate biological fluids, viscous materials, and corrosive solutions. - User-Friendly Interface: Easy-to-read digital display and intuitive controls for straightforward operation and adjustment. - Durable Construction: Built for longevity with materials resistant to wear and chemical damage, ensuring reliability in demanding environments. - Quiet Operation: Designed to run quietly, making it suitable for laboratory settings without disrupting workflows. - Safety Features: Includes built-in protection against overload and dry running to extend pump life and ensure safe operation. Key Specifications: - Flow Rate: 0.6 to 3400 mL/min, adjustable based on tubing size - Speed Range: 6 to 600 RPM for precise flow control - Pumping Method: Peristaltic pumping action for gentle and accurate fluid transfer - Reversible Pumping: Supports easy priming, purging, and efficient fluid transfer - Tubing Compatibility: Compatible with a variety of tubing materials and sizes for flexibility Ideal For: - Laboratory fluid transfer, pharmaceutical production, process scaling, and industrial fluid handling.

Condition: used, This listing is for a Grant UBR2 Heat Block. The unit is in full working condition and is ready for immediate release. Kodpfx Aksxxz Hyjpjnc The Grant UBR2 Heat Block is a reliable and efficient heating solution designed for various laboratory applications, including DNA extraction, enzyme reactions, and sample incubation. With precise temperature control and a robust design, the UBR2 ensures consistent heating for optimal experimental results. Key Features: Temperature Range: Operates from ambient to 100°C, providing versatility for a wide range of applications. User-Friendly Controls: Equipped with a large LED display and intuitive controls for easy temperature setting and monitoring. Rapid Heating: Quickly reaches set temperatures, minimizing wait times and enhancing productivity in the lab. Uniform Heat Distribution: Designed with a high-quality aluminum block that ensures even heat distribution across all wells, promoting consistent sample heating. Versatile Block Compatibility: Accepts various block inserts (available separately) to accommodate different tube sizes and formats, making it adaptable for different experiments. Safety Features: Incorporates over-temperature protection and a safety cut-off feature to prevent overheating, ensuring safe operation. Applications: DNA & RNA Preparation: Ideal for use in molecular biology applications, including DNA extraction and purification processes. Enzyme Reactions: Perfect for incubating samples at controlled temperatures for enzyme assays and reactions, ensuring optimal conditions for activity. Sample Incubation: Suitable for incubating various samples, from cell cultures to biochemical assays, requiring consistent and reliable heating. Thermal Cycling: Can be used for specific thermal cycling applications where controlled heating is essential for reaction efficiency.

Condition: used, This listing is for a Heraeus Biofuge Primo R Refrigerated Centrifuge. The unit is in full working condition and is ready for immediate release. The Heraeus Biofuge Primo R Refrigerated Centrifuge is an outstanding choice for small medical labs and research facilities looking for reliable and efficient sample processing. Its compact design pairs well with high-performance capabilities, making it ideal for a variety of applications. Key Features: Refrigerated Functionality: The centrifuge includes temperature control, ensuring that samples remain stable during processing, which is crucial for sensitive biological specimens. Versatile Rotor Options: The fixed angle rotor accommodates 6 x 50 mL tubes, but with the right rotor and adapter combinations, it can handle tube sizes ranging from 0.2 mL to 100 mL. This versatility allows for diverse applications from microcentrifugation to larger samples. User-Friendly Controls: A digital display shows all run parameters, while variable speed and RCF (Relative Centrifugal Force) controls let users set specific conditions. The QUICK RUN key is perfect for quick spins, enhancing efficiency. Safety and Reliability: Features include automatic rotor recognition, imbalance detection, and a dual lid-locking mechanism that ensures safe operation. It also has an electronic imbalance detection system to prevent accidents during runs. Applications: Cell Sedimentation: Ideal for isolating algae, yeast, bacteria, and cell organelles. Sample Preparation: Great for preparing DNA and protein precipitates, which are essential in molecular biology labs. Clinical Analysis: Suitable for blood and urine analyses, making it a valuable tool in medical diagnostics. Centrifugation of Microliter Tubes: Capable of processing standard test series in microliter tubes, ensuring versatility in routine analyses. Specifications: Maximum Speed: 15,000 rpm Knodpjxxz Svjfx Akpec Maximum RCF: 21,890 x g Control Speed: Adjustable from 300 to 15,000 rpm (±10 rpm) Noise Level:

Condition: used, This listing is for a Grant QBT1 Heat Block. The unit is in full working condition and is ready for immediate release. The Grant QBT1 Heat Block is a compact, highly precise dry block heater designed for laboratory applications that require consistent temperature control. This unit is ideal for heating and incubating samples in 1.5 mL Eppendorf tubes, and it is known for its reliability and ease of use. Key Features: Knjdpexxz Uqofx Akpsc Wide Temperature Range: The heat block operates within a temperature range of ambient +5°C to 150°C, making it suitable for a variety of laboratory applications. Precision Temperature Control: With ±0.1ºC temperature stability at 37°C and uniformity of ±0.1ºC within the block and ±0.2ºC across similar blocks, it ensures accurate temperature maintenance for sensitive samples. Digital Display: The display has a 1°C resolution, allowing for easy monitoring and precise setting of the temperature. Heating Block Capacity: Equipped with a block for 24 x 1.5 mL Eppendorf tubes, it provides ample space for small sample incubation's, making it ideal for molecular biology and biochemistry experiments. Efficient Heating: The heat block has a heat-up rate of 40 minutes to reach the maximum temperature from ambient conditions. Compact and Portable: With dimensions of 205 x 180 x 122 mm and a weight of 3.6 kg, it is a compact unit that fits easily on a laboratory benchtop.

Condition: used, This listing is for a Hettich EBA 12 Centrifuge. The unit is in full working condition and is ready for immediate release. The Hettich EBA 12 Centrifuge is a laboratory centrifuge designed for separating substances or mixtures with a maximum density of 1.2 kg/dm³. It is suitable for various applications, including serology, cell washing, and pelleting particles from suspension. Technical specifications Voltage: 220-240V, 50 / 60Hz Current: 2,2A Power: 350W Maximum speed: 18000 rpm Technical specifications rotor Rotor number: 1118 Ksdpfx Aoxx Akgokpenc Maximum rotor speed: 5000 rpm Dimensions tubes (∅) x (H): 1.5 x 6.5 cm External dimensions (W) x (D) x (H): 27 x 32 x 25 cm

Condition: used, This listing is for a Grant Instruments PV-1 Vortex Mixer Ideally sized for personal use, the Grant-bio PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand – yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet. With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5mL, 1.5mL, and 15mL tubes. Adjustable speed control: 750 to 3000 rpm ‘Continuous’ or ‘touch’ operation For tubes up to 20 mm diameter Pressure sensitive cup accommodates tubes up to 20mm diameter Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range Kedpfxexzg Eys Akpjnc Extremely easy to operate – select either ‘continuous’ or ‘touch’ operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm In ‘touch’ mode, agitation starts in response to pressure on the pressure sensitive cup. Exceptionally compact with a low profile and small footprint – fits into almost any location Rubber suction pads hold tight to the work surface and prevent the unit from ‘walking’ – they also absorb vibration and prevent its transmission to the workbench

Condition: used, This listing is for a Qiagen QIAsymphony SP Sample Preparation Fully-Automated DNA RNA Purification Very good working and cosmetic condition The QIAsymphony SP is a versatile nucleic acid purification instrument providing high-quality nucleic acids compatible with with most common downstream assay technologies, such as real-time PCR, digital PCR, and next generation sequencing (NGS). The large range of a dedicated QIAsymphony kits enables optimized purification of genomic DNA, cell-free circulating DNA, RNA, bacterial and viral nucleic acids from a wide range of starting materials Features: Purification of high-quality genomic DNA, pathogen DNA/RNA, cell-free circulating DNA and cellular RNA 1-96 samples in 4 batches, from smallest forensic samples to 10 ml sample volumes Standardized protocols for diagnostic, routine, research and forensic applications Flexible loading of new samples during a run Protocols customizable (protocol steps, labware, etc.) on demand Traceability and LIMS compatibility Compatible with most commonly used sample tubes and elution tubes and plates Compatibile with QIAsymphony DSP kits for diagnostic workflows. Specification: Minimum input volume: 200µl Elution volume: 30-500µl Dimensions: 128 x 103 x 73cm (w x d x h) Knedpfx Akoxzg Nxspsc Weight: 175kg Electric supply: 100 - 230VAC 50/60Hz

Condition: used, This listing is for a Fisons Whirlimixer Cyclone Vortex Mixer For rapid and efficient mixing, the Whirlimixer® is far superior to hand shaking. The mixer creates a vortex in the tube which gives the highly effective mixing action. Contamination from stirring rods and stoppers is eliminated and different samples may be subjected to the same degree of mixing, thus improving repeatability of results. Fitted with an automatic press-start operation, providing instant action the moment the tube is pressed into the rubber cup. This feature is particularly useful where repetitive mixing is undertaken. Offers variable speed control, with the advantage of controlled mixing over a wide speed range. This allows for very slow, gentle mixing which is necessary in many applications, articularly where damage to cell structure must be avoided. The unit may be set for continuous running at the chosen speed or on demand by inserting the tube into the cup. The skirted rubber cup helps prevent liquid entering the mixer's casing. Accepts vessels up to 25mm diameter. Excellent stability is achieved through a combination of weight and non-slip feet. Electrical supply 230V, 50Hz Dimensions (w x d x h), mm 160 x 160 x 145 Kodexzh Ddjpfx Akponc

Condition: ready for operation (used), Year of construction: 2023, laser power: 120,000 W, This 3-axis Trotec Speedy 360 laser engraving machine was manufactured in 2023. It features a CO₂ laser with 120 W power and a work area of 610 x 305 mm. Capable of handling materials up to 10 mm thick, it supports a variety of materials including wood, acrylic, and glass. The machine includes an integrated extraction system and a color touchscreen interface. If you are looking to get high-quality engraving capabilities consider the Trotec Speedy 360 machine we have for sale. Contact us for more information. • Work area: 610 x 305 mm (24" x 12") • Maximum material thickness: 10 mm (varies by material) • Laser power: 120 W • Repeatability: ±0.01 mm • Resolution: 1,000 dpi • Control software: JobControl® Vision • Material handling: removable table for thick objects Kodpjx I S Nyofx Akpenc • Exhaust system: integrated extraction system • Connectivity: USB, LAN • Supported materials: wood, acrylic, plastics, glass, leather, paper, textiles, and more • Cooling: air-cooled laser tube • Interface: color touchscreen • Safety features: protective cover with interlocks Technical Specification Engraving Speed 3000 m/s

Condition: used, Year of construction: 1999, color: red, loading space volume: 5 m³, loading space width: 1,700 mm, loading space length: 4,500 mm, loading space height: 600 mm, mileage: 1,001 km, first registration: 01/1999, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, tailgate Body: City skip loader with a drive-over tailgate, approximately 5 m³ capacity. Year of manufacture unknown, as no identification plate is present. Knsdpfx Akjy U N Nkspjc Internal container. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, Year of construction: 1974, OVERVIEW Complete isobaric glass bottling and linear pressure-sensitive labelling line, capable of outputs up to 4,000 bottles per hour (bph). The line is specialized for carbonated beverages into 0.33 L long-neck glass bottles. The heart of the line (Schilpp filler) underwent a comprehensive engineering overhaul and complete reconditioning in 2019 by master specialist Petr Markl, updating its core mechanics, feed systems, and electronics to meet modern production safety standards. The line is paired with a modern 2019 Enos labelling machine. Due to a sudden company closure, this line is now available immediately in an immaculate, turnkey operational state. Technical Specifications Component 1: Isobaric Counter-Pressure Filler Ksdpjyr Nr Sefx Akponc - Manufacturer: Schilpp (Germany) - Model: Contibloc 20/5 - Year of Manufacture: 1974 - Year of Complete Overhaul: 2019 (by Petr Markl) - Number of Filling Valves: 20 (Long tube design to drastically minimize foaming) - Number of Capping Heads: 5 (Crown cork) - Cap Size: 26 mm crown cap - Capacity: Up to 4,000 bph (depending on product temperature and CO2 volumes) - Processed Formats: 0.33 L long-neck glass bottles (custom nylon exchange stars included) - Operating Pressure: 8 bar - Outfeed: Integrated small discharge table directly synchronized with the labeller.   Component 2: Linear Labelling Machine - Manufacturer: Enos Euro (Italy) - Model: C5000 - Year of Manufacture: 2019 - Capacity: Up to 5,000 containers/hour (depending on label dimensions) - Application: Self-adhesive labels (Body / Back) - Processed Formats: Bottles, cans, and cylindrical containers - Adjustments: Tool-free manual side-barrier system for ultra-fast format changeovers.   Reconditioning Details & Recent Upgrades (Markl 2019) During the 2019 general overhaul by Petr Markl, the filler was stripped down and updated with the following technical enhancements: - Product Handling: Custom nylon stars and guide blocks designed specifically for smooth 0.33 L long-neck bottle transport. - Filling Valves: Complete mechanical refurbishment and formatting of the 20 valves for precise 33cl dosing. - Automation Upgrades: High-speed electronic sensor/counter for accurate crown cap distribution control and dedicated rinse pump switch integration. - Safety Features: New clear front safety doors fitted with an active electromechanical "Open Door" emergency stop interlock system. - Mechanical Drive: Complete replacement of main drive transport chains and motor for seamless line speed synchronization.   Scope of Delivery - Isobaric Filling Machine: Schilpp | Contibloc 20/5 | 1974 (Overhauled 2019). - Labelling Machine: Enos Euro | C5000 | 2019. - Accessories Included: Integrated conveyors, localized product sensors, safety guards, and direct coupling outfeed table.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational. Ksdpfx Aey Hlvwskpenc