Used Tree Stump Grinder for sale (1,372)

Year of construction: 2020, condition: used, functionality: fully functional, Vogt Stump Grinder B 22 — Year of manufacture 2020 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Ijdpfx Ajy A E E Rja Ijth Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 7,900 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, functionality: unexamined, power: 27.38 kW (37.23 HP), gearing type: hydrostat, fuel type: gasoline, overall weight: 670 kg, axle configuration: 2 axles, Year of construction: 2008, operating hours: 69 h, LASKI F-500 H tree stump grinder / 37 HP, manufactured in 2008. The machine was first used in October 2010. Two-axle tree stump grinder with a Kohler engine (installed in May 2021), a four-stroke gasoline injection engine with 37 HP and hydrostatic drive to the front axle. Grinding depth below ground level up to 380 mm. Grinding wheel with 18 Laski knives, diameter including knives 510 mm. Optional grinding wheel with 6 Multitip knives. The grinding wheel is driven by a multi-V-belt drive and an electromagnetic clutch. Tires: 4 narrow / 4 wide tires. Weight approximately 670 kg when fully fueled. A new engine was installed in May 2021 (currently with 69 operating hours). The first engine had approximately 260 operating hours. Due to a piston seizure, which I caused myself (forgot to refill the oil), a new engine was installed in May 2021. It runs smoothly and is ready for use. Last service (air filter, oil and filter change) in November 2025. The last use of the grinder was in August 2025. The machine is located in a hall in 90762 Fürth and is available for testing. Viewing appointment by arrangement. Accessories: Many original Laski grinding teeth (used). 2 ramps, each 250 cm long, made of stainless steel (load capacity per ramp 500 kg). Ijdpjzb H Szjfx Aa Isth 2 large gasoline cans. 1 grease gun (new) + grease nipples (new). 1 diamond grinding disc for angle grinder (for sharpening the grinding teeth). 1 grinding wheel for 6 Multitip grinding teeth. Attention: Important note! Due to new legal regulations, the sale is made without any warranty, guarantee or right of return. Sold as is! The sale is made excluding any liability for material defects!! Liability for damages to health, body or life, as well as for gross negligence and/or intentional breach of duty, remains unaffected! The grinder, including accessories, is sold as a source of spare parts! Since this is a private sale, I cannot offer any guarantee. The buyer agrees to this and acknowledges it with his purchase. If you have any questions or need more information, please feel free to send us a message.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 17 h, ✅ New & in stock ✅ Carbide teeth ✅ 420 cc ✅ 230 mm ✅ Shipping available Powerful shredder in top condition for sale! Itsdpfx Aajwh Rnns Ijh The unit is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 22 hours Year of manufacture: 2025 SCHORR TREE STUMP GRINDER RR150BSF Clear your garden of annoying tree stumps – quickly, efficiently, and effortlessly with our powerful tree stump grinder. The simple and clean solution for a well-maintained and beautiful property! -- 420cc gasoline engine with 12.4 HP -- Precision milling head with 8 carbide teeth -- With parking brake -- With transport handles -- Highly user-friendly -- Super compact design - easy to store -- Extremely robust and reliable EQUIPMENT / FEATURES PRECISE MILLING HEAD The RR150BSF tree stump grinder features 8 carbide milling teeth, which are ideal for particularly demanding tasks. The grinder enables fast and precise work, even on hard or petrified stumps. Removing the tree stump with our grinder eliminates the need for laborious rework. This saves both time and money on projects large and small. POWERFUL PERFORMANCE The efficient and powerful 420 cc four-stroke engine produces 12.4 hp and delivers sufficient power to effectively remove even large and deep tree stumps. The engine is particularly powerful and, in combination with the centrifugal clutch, offers consistent power delivery. EASY TO USE With ergonomically designed controls and intuitive operation, the stump grinder is easy to operate, even for users without extensive experience. Thanks to the two tubeless main wheels and the transport handle on the mudguard, the grinder can be easily transported to its destination. The parking brake also makes it easier to operate the grinder during work. HUGE TIME SAVINGS By using the grinder, you save a significant amount of time and effort compared to conventional removal methods (exposing the root, cutting through the root, loosening the stump, and removing the stump) – all with just a spade. For a tree stump with a diameter of 30 cm, someone with the appropriate experience and physical strength might need 4 to 8 hours; with the grinder, the job can be completed effortlessly in 30 to 180 minutes. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR150BSF Number of cutting teeth: 8 (4 double teeth) Max. cutting depth / cutting height: -2300 mm / +2540 mm Max. rotation speed: 2500 rpm Weight: 113 kg Basic Dimensions Overall Length: 1710 mm Overall Width: 750 mm Overall Height: 1160 mm Cutting Tooth Dimensions L x W x H: 108 mm x 71 mm x 38 mm Engine Displacement: 420 cc Maximum Power: 9.1 kW / 12.4 hp Starter: Recoil Our competent team is happy to answer any questions you may have about the SCHORR RR150BSF Tree Stump Grinder. We look forward to hearing from you and providing advice. Do you find the purchase price of a tree stump grinder too high? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, please contact us:

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Carbide teeth ✅ 420 ccm ✅ 230mm ✅ Shipping possible SCHORR STUMP GRINDER RR150BSF Clear your garden of unwanted tree stumps - quickly, efficiently and effortlessly with our powerful stump grinder. The simple and clean solution for a well-kept and beautiful property! -- 420cc petrol engine with 12.4 HP -- Precision milling head with 8 carbide teeth -- With parking brake -- With transport handles -- High user-friendliness -- Super compact design - easy to store -- Extremely robust and reliable Iodpfx Aast Ivnwj Ioth EQUIPMENT / FEATURES PRECISE MILLING HEAD The RR150BSF stump grinder has 8 carbide cutting teeth, which are ideally suited for particularly demanding tasks. The cutter enables fast and precise work, even on hard or petrified stumps. Removing the tree stump with our cutter means no more tedious reworking. This saves both time and money on large and small projects. POWERFUL PERFORMANCE The efficient and powerful 420 cc four-stroke engine delivers 12.4 hp and provides enough power to effectively remove even large and deep tree stumps. The engine is particularly powerful and, in combination with the centrifugal clutch, offers constant power output. SIMPLE OPERATION With ergonomically designed controls and intuitive controls, the stump grinder is easy to operate, even for users without extensive experience. Thanks to the two tubeless main wheels and the transport handle on the mudguard, the stump grinder can be easily transported to its destination. The parking brake also makes it easier to operate the tiller during work. ENORMOUS TIME SAVING Compared to conventional removal methods (exposing the root, cutting the root, loosening the stump, removing the stump), using the cutter - and all with just a spade - saves you an enormous amount of time and energy. For a tree stump with a diameter of 30 cm, people with the appropriate experience and physical strength may need 4 to 8 hours; with the cutter, the work is easily done in 30 to 180 minutes. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR150BSF Number of cutting teeth: 8 (4 double teeth) Max. Milling depth / milling height: -2300mm / +2540mm Max. Max. rotation speed: 2500 rpm Own weight: 113kg Basic dimensions Overall length: 1710mm Overall width: 750mm Total height: 1160mm Cutting tooth dimensions L x W x H: 108mm x 71mm x 38mm motor Displacement: 420ccm Power max: 9,1kW / 12,4PS Starter: Reversing starter Our expert team will be happy to answer any questions you may have about the SCHORR BAUMSTUMPFFRÄSE RR150BSF. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a stump grinder too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us:

Year of construction: 2026, condition: new, WOODGRAIN STUMP GRINDER – POWER AND PRECISION FOR YOUR GARDEN 420 cm³ Engine | 9 kW (12.24 HP) Power | 300 mm Cutting Disc | Tungsten Carbide Teeth Looking for a reliable machine that will permanently eliminate troublesome tree stumps after tree removal? The Woodgrain is a professional petrol-powered stump grinder designed for efficiency, durability, and operator comfort. Thanks to its compact design with a width of only 75–80 cm, the machine can easily access areas unreachable for heavy forestry equipment. KEY FEATURES OF THE FP15 STUMP GRINDER POWERFUL PETROL ENGINE: The heart of the machine is a proven 4-stroke engine with a displacement of 420 cm³ and power output of 9 kW. This ensures stable operation even when grinding hard wood. HIGH-PERFORMANCE CUTTING SYSTEM: A 90 mm thick and 300 mm diameter cutting disc equipped with tungsten carbide teeth (TCT). These teeth are extremely hard and highly resistant to wear and dulling. LARGE WORKING RANGE: The machine allows stump grinding deep below ground level (up to approx. 225 mm) and high above ground level (up to 515 mm), enabling complete removal of tree remains. MOBILITY AND STABILITY: Large 13" pneumatic wheels make transportation over uneven terrain easy, while the drum brake allows one wheel to be locked, creating a pivot point for smooth side-to-side grinding motion. TECHNICAL SPECIFICATIONS Specification Value Brand Woodgrain Engine Type 4-stroke OHV, air-cooled Engine Displacement 420 cm³ Rated Power 9.0 kW / 12.24 HP Starting System Manual recoil start Fuel Tank Capacity 6.5 l (unleaded petrol) Oil Capacity 1.1 l Cutting Disc Diameter 300 mm Grinding Disc Thickness 90 mm Number of Cutting Teeth 9 pcs (tungsten carbide) Grinding Depth (below ground) up to 225 mm Grinding Height (above ground) up to 515 mm Machine Weight approx. 110 kg SAFETY AND COMFORT Emergency Safety Switch: Positioned within easy reach of the operator for immediate machine shutdown in emergency situations. Adjustable Handle: Allows the handle height to be adjusted according to the operator’s height and working depth, significantly reducing strain on the back. Robust Construction: The metal housing protects the engine and components from mechanical damage and flying wood debris. PACKAGE CONTENTS Woodgrain stump grinder Complete set of cutting teeth (pre-installed) Service tool kit Isdpfoy Sggnox Aa Isth User manual

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by telephone at ...). Seppi M. MIDI-KASTOR / 5–15 t / Stump Grinder / NEW / In stock & available immediately Price: €15,290.00 net / €18,195.10 gross Itodpfxjyl Hggj Aa Ijh - Cutter disc width: 0.10 m - Cutter disc diameter: 0.60 m - Total width: 0.80 m - Depth: 1.10 m - Height: 1.15 m - Weight: 450 kg - Stump grinder for excavator mounting - For the removal of stumps and tree roots - Grinds stumps and roots up to 30 cm deep - Suitable for excavators from 5 to 15 t - For mounting on various adapter plates - Drive designed for hydraulic motor, dependent on carrier machine flow rate - Indirect V-belt drive with 5 V-belts - Double chain protection - Rotor equipped with 32 fixed carbide-tipped tools - Colour: Red RAL3020 · Anthracite RAL7021 OPT 073 PISTON MOTOR Axial piston hydraulic motor F12-60 cm³ with pressure relief valve - Displacement in cm³: 60 - Required hydraulic pressure in bar (min–max): 200 – 350 - Required hydraulic flow rate in l/min (min–max): 70 – 100 Optional: MS08 adapter plate incl. bolts and installation = €750.00 net For operation, an independent hydraulic system is recommended. 3 hydraulic lines are required: supply, return, and drain. The device is supplied without hoses, connectors, or adapter plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. Our warehouse carries a wide range of Seppi M. products, all available for immediate delivery! Please contact us at ... for more information. We are also happy to prepare a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further details.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. KASTOR hyd to / Stump Grinder / NEW / In Stock & Immediately Available Price: €27,790.00 net / €33,070.10 gross - Cutter wheel width: 0.11 m - Cutter wheel diameter: 0.90 m Itodpfx Asyltvzea Ioh - Overall width: 0.88 m - Depth: 1.80 m - Height: 1.30 m - Weight: 868 kg - Stump grinder for excavator attachment - Designed for removal of tree stumps and roots - Grinds stumps up to 50 cm deep - Suitable for excavators from ... t - Can be mounted to various attachment plates - Drive intended for hydraulic motor depending on the hydraulic output of the carrier machine - Indirect double V-belt drive with 2x5 V-belts - Hydraulically adjustable hood - Double chain guard - Rotor equipped with 50 fixed tungsten carbide-tipped tools - Colour: red RAL3020 · anthracite RAL7021 OPT 074 Two axial piston hydraulic motors F12-80 cm³ with overpressure valve - Displacement in cm³: 2 x 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow in l/min (min-max): 140 – 220 An independent hydraulic system is recommended for operation. Three hydraulic lines are required: feed, return, and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections, or attachment plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in stock and ready for immediate delivery at our warehouse! Please contact us at ... for further information. On request, we are happy to provide a financing offer. We are official sales and service partners for: - Seppi M. - Magni Telehandlers - DMS - Westtech - JCB Construction Equipment - Mercedes-Benz - Iveco - Holp - OilQuick With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range to you! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 23146001, The machine was acquired in 2024 and has seen very little use. The original price was €132,000 net. The technical data is sourced from the manufacturer's website. The seller cannot guarantee its accuracy. TECHNICAL DETAILS Capacity up to: 150 m³/h Chipping disc: 1,450 mm (diameter) x 78 mm Disc speed: 700 rpm Number of cutting blades: 4 Number of counter blades: 4 Maximum chip length: 36 mm Feed speed: 0.7 m/s Ijdpfjyg D Svox Aa Ijth MACHINE DETAILS Control system: Greentec Control System 3.0 with touchscreen Three-point hitch: Standard Starting aid: Hydraulic Drive: PTO shaft 1000/1000E Required power: 200 – 450 HP Weight: 3,100 kg Speed: 1000 rpm Note: This machine is a special version without a hopper.

Condition: good (used), 1 x Cherry tree 50 kg washer extractor. Iodjzfkyiepfx Aa Ijth

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 818, 2 used Cumberland Grinders Price per unit is 2500,- Year of manufacture: 2016 Technical specifications -Motor power 7,5 KW -Rotor speed: 1,440 RPM -Knife configuration; -3 roting knives -power supply 380-420v -Rotor Type: open, Soundproofed -Typical applications: Granulation of injection moulding parts Isdpfeza H E Sex Aa Ioth

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Itjdpsxdh Hqjfx Aa Ish Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: good (used), Please refer to the images for all technical specifications. Transport and loading can be arranged throughout Europe for an additional charge upon request. Prices are subject to VAT. Viewing is possible by appointment. Contact us—our team looks forward to assisting you. Machinery purchase / sale Ijdpoy H Iigefx Aa Ijth PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MUCH MORE. Do you need a high-quality yet affordable machine for your production? Or are you looking to sell yours? For further information or contact options, please reach us via the contact form.

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Itjdpfxob Umtkj Aa Ieh

Condition: excellent (used), All stainless steel Mixer Grinder Size150 mm mince plate "56 head" Hopper capacity 200 litres Single interrupted ribbon mix arm Itedpfxswwkk Is Aa Ioh Main motor 15 Kw - 2 speed Mix motor 1.5 Kw Safety interlocked lid In good working order

Condition: excellent (used), KOLBE MWE52 MIXER GRINDER Will produce up to 1700 kg/h of product Ijdpjx Swxbofx Aa Ieth

Condition: good (used), We have 2 granulators / shredding mills for sale (the listed price applies to mill no. 2). The machines were used for cutting and shredding plastic, but they can also be used for processing other plastic materials. Both machines are adapted for liquid cooling. -Technical Data (Mill No. 1, square base): Dimensions: 150 x 115 cm / Height: 210 cm Rotor diameter: 36 cm Rotor/blade width: 55 cm Number of blades: 3 (The fixed blades are positioned diagonally; thanks to this configuration, resistance during cutting and shredding is significantly reduced, making the machine's operation much more efficient). Inlet (feed opening): 30 x 53 cm Motor: 22 kW / 30 HP Adapted for liquid cooling Ijdpfeuw Skhox Aa Ioth ----- -Technical Data (Mill No. 2, inclined/pyramid base): Dimensions: 150 x 125 cm / Height: 180 cm Rotor diameter: 25 cm Rotor/blade width: 52 cm Number of blades: 3 Motor: 22 kW / 30 HP Adapted for liquid cooling Prices: Mill No. 1: €7,200 Mill No. 2: €5,900 Price for buying both machines: €11,900

Condition: excellent (used), Year of construction: 2016, Chicken feet grinder – an efficient machine designed for grinding poultry feet. Its robust construction and high-quality materials ensure durability and reliable operation. Perfect for slaughterhouses and poultry processing plants. Easy to use, simple to clean, and delivers high performance. Itjdpsyxpmwofx Aa Ioh

Condition: excellent (used), Double bench grinder Isdpfjk Iwx Eox Aa Isth

Condition: like new (used), Meat grinder with mixer AK RAMOON 32. Ijdpfxex Ndqfj Aa Isth

Condition: excellent (used), Meat grinder Omega 32. Wihout stand 1900 € With stand 2100 € Itedpfex Ndqrjx Aa Ijh

Condition: used, JONES SHIPMAN 1305 EIU CYLINDRICAL GRINDING MACHINE MAKE JONES AND SHIPMAN, MADE IN ENGLAND MODEL 1305 EIU CENTRE HEIGHT 185.0 mm MAX DIAMETER 370.0 mm MAX GRINDING LENGTH 1016.0 mm MAX GRINDING WHEEL 350.0 mm x 40.0 mm GRINDING SPEED 40 – 320 RPM TABLE ROTATION 16 DEGREE TO – 12 DEGREE MAX INTENAL SPINDLE SPEED 24,000 RPM PLUS HEIDENHAIN DRO Iodpsy Hi Epefx Aa Ieth INTERNAL SPINDLE ATTACHMENT EXTENSIVE RAGE OF TOOLING AND ACCESSORIES RANGE OF MAGNETIC CHUCKS PENDANT CONTROL HYDRAULIC PACK CLEAN

Condition: used, Artrhur Klink RSH1 - 1250 Broach Grinder 09.2009 , new 1979, Table 200 x 1800, Electro mag 200 x 600, with related tooling/accessories, no cabinet. Iodpfjzc Iq Iox Aa Isth

Condition: used, Lumsden 93 ML Vertical Spindle Rotary surface Grinding Machine, fitted with 60 inch dia magnetic chuck. Auto sizing. Table Guards, Coolant tank, with pump. Serial Number 93ML 60/11616. Option to be supplied with updated electrical controls, please contact for more details. Under power ready for immediate supply. approx machine dimensions; 3200mm (includes counterbalance) x 3400mm (includes electrical cabinet positioned to rear) x 3050mm (high), coolant tank with pump 1600mm x 800mm x 800mm. Itedpfxoy N Ults Aa Ioh

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, spindle speed (max.): 12,000 rpm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 250 mm, type of input current: three-phase, rotational speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, grinding spindle motor power: 10,500 W, power: 10.3 kW (14.00 HP), input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, grinding wheel speed: 12,000 rpm, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, For Sale: 2008 Schütte 305 Linear 5-Axis CNC Tool & Cutter Grinder | Siemens 840D | New Spindle | Medical-Grade Machine Now available at Used Machine Tools Ireland Ltd, this high-precision Schütte 305 Linear 5-Axis CNC Tool and Cutter Grinder (2008) is an exceptional solution for tool regrinding, complex geometry grinding, and high-volume production. Previously in operation at a leading medical device company, this machine has been meticulously maintained, with a brand-new spindle installed in 2024. This grinder is fully equipped with modern tooling support systems including fire suppression, Absolent mist extraction, Ebbco coolant filtration, and in-line chiller, making it production-ready for demanding grinding applications. 🔹 Manufacturer: Alfred H. Schütte 📅 Year of Manufacture: 2008 📍 Location: Ireland ⚙️ Condition: Very Good – Ex-medical device use 🚀 Availability: Immediate 🔧 Spindle: Replaced in 2024 🛠️ Technical Specifications: Machine: Schütte 305 Linear CNC Tool & Cutter Grinder Machine Type: 5 Axis CNC Grinder Model: 305 Linear Ijdpfx Asw Nycioa Ieth Year: 2008 Control: Siemens 840D with Windows XP Axes: 5-Axis CNC X-Axis Travel: 400 mm X-Axis with Tailstock: 400 mm Y-Axis Travel: 400 mm Z-Axis Travel: 250 mm Spindle Motor Power: 14 HP Spindle Speed: Up to 12,000 RPM Software: SIGS – Schütte Integrated Grinding Software Condition: Very good – Ex-medical device industry Spindle Replaced: 2024 (new) ⚙️ Equipped With: 🔥 Fire Suppression Unit 🌫️ Absolent Mist Extraction System 💧 Ebbco Coolant Filtration Unit ❄️ Ebbco In-line Chiller 🧠 Advanced SIGS Grinding Software 🛡️ New Spindle (2024) 💡 Ideal Applications: Tool & cutter regrinding Custom tooling production Precision carbide & HSS grinding Medical, aerospace, and high-specification manufacturing Schütte 305 Linear for sale Used 5-axis CNC tool grinder Tool and cutter grinder Siemens 840D Schütte SIGS software grinder CNC tool regrinding machine Ireland Schütte tool grinder with mist extraction Medical-grade grinding equipment High-performance cutter grinder 5-axis Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, spindle speed (max.): 12,000 rpm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 250 mm, type of input current: three-phase, rotational speed (max.): 12,000 rpm, grinding spindle speed: 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, grinding spindle motor power: 10,500 W, power: 10.3 kW (14.00 HP), input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, For Sale: 2008 Schütte 305 Linear 5-Axis CNC Tool & Cutter Grinder | Siemens 840D | New Spindle | Medical-Grade Machine Now available at Used Machine Tools Ireland Ltd, this high-precision Schütte 305 Linear 5-Axis CNC Tool and Cutter Grinder (2008) is an exceptional solution for tool regrinding, complex geometry grinding, and high-volume production. Previously in operation at a leading medical device company, this machine has been meticulously maintained, with a brand-new spindle installed in 2024. This grinder is fully equipped with modern tooling support systems including fire suppression, Absolent mist extraction, Ebbco coolant filtration, and in-line chiller, making it production-ready for demanding grinding applications. 🔹 Manufacturer: Alfred H. Schütte 📅 Year of Manufacture: 2008 📍 Location: Ireland ⚙️ Condition: Very Good – Ex-medical device use 🚀 Availability: Immediate 🔧 Spindle: Replaced in 2024 🛠️ Technical Specifications: Machine: Schütte 305 Linear CNC Tool & Cutter Grinder Machine Type: 5 Axis CNC Grinder Model: 305 Linear Year: 2008 Control: Siemens 840D with Windows XP Axes: 5-Axis CNC Ijdpfx Aaow Nyc Ae Ieth X-Axis Travel: 400 mm X-Axis with Tailstock: 400 mm Y-Axis Travel: 400 mm Z-Axis Travel: 250 mm Spindle Motor Power: 14 HP Spindle Speed: Up to 12,000 RPM Software: SIGS – Schütte Integrated Grinding Software Condition: Very good – Ex-medical device industry Spindle Replaced: 2024 (new) ⚙️ Equipped With: 🔥 Fire Suppression Unit 🌫️ Absolent Mist Extraction System 💧 Ebbco Coolant Filtration Unit ❄️ Ebbco In-line Chiller 🧠 Advanced SIGS Grinding Software 🛡️ New Spindle (2024) 💡 Ideal Applications: Tool & cutter regrinding Custom tooling production Precision carbide & HSS grinding Medical, aerospace, and high-specification manufacturing Schütte 305 Linear for sale Used 5-axis CNC tool grinder Tool and cutter grinder Siemens 840D Schütte SIGS software grinder CNC tool regrinding machine Ireland Schütte tool grinder with mist extraction Medical-grade grinding equipment High-performance cutter grinder 5-axis Notes: *Specifications are given in good faith but not guaranteed*