Used Transformers for sale (637)

Condition: good (used), Power: 7,8 kW. Amperage: 52 A. Voltage: 150 V. 100% ED Magnet L x W: 1.780 x 1.380 mm. Conveyor belt: 1.400 mm. AA. : Ca. 2.800 mm. With transformer rectifier of 380V. primary. Dsdpsg Stwmefx Ahuocp Overband separator will be overhauled, sandblasted, painted.

Condition: excellent (used), A horizontal machining center from the manufacturer Mori Seiki is being offered here. 11 machine pallets are included in the delivery. The machine is equipped with glass scales and therefore offers high precision. The machine is in very good condition and can be viewed in our hall. The machine will be loaded onto a truck free of charge. Manufacturer: Mori Seiki Type: SH-403 Year of manufacture: 2000 Control: Mori Seiki MSG-501 (Fanuc) Technical data: Travel paths X-Y-Z: 560x510x510 mm B-axis travel: 0.001° (360,000 positions - full-value B-axis) Rapid traverse X-Y-Z: 42 m/min Spindle speed: 12,000 rpm Spindle motor: 22 kW Tool holder: ISO 40 Tool magazine: 180 positions Tool change time: 1.3 s Interference circle: max. 610 mm Pallet size: 400x400 mm Number of pallets: 2 Total power requirement: 67 kVA Dcedpfjwn Hhkox Ahuop Required space: 5500x4000 mm Machine dimensions: 5400x2500x2800 mm Machine weight: 11,500 kg Scope of delivery: spindle internal cooling, Knoll coolant system, chip conveyor, transformer, 11x machine pallets

Condition: used, mileage: 690,000 km, power: 290 kW (394.29 HP), first registration: 08/2016, overall weight: 26,000 kg, fuel type: diesel, color: silver, axle configuration: 3 axles, next inspection (TÜV): 07/2024, gearing type: automatic, emission class: euro6, loading space volume: 84 m³, loading space width: 2,480 mm, loading space length: 8,100 mm, loading space height: 2,200 mm, Year of construction: 2016, total width: 2,600 mm, total height: 3,650 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg Bär tail lift * Medium-length cab * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * Rear view camera * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode * 2,000 kg Bär tail lift * Manufactured by Wüllhorst Dcsdpfx Ajv Dclfohuop * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 07/2016 * BPW axles * Disc brakes * Air-sprung The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2017---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Front engine output with Frigoblock preparation, Reinforced engine brake, Parameterizable special module, Acoustic reversing alarm (external warning signal), Tail lift switch, Automatic circuit breaker, Seats in cab: Comfort driver's seat, Side window sunblind, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, differential lock rear axle, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer, Additional stabilizer, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle, Regulated water pump, Perm. Total

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, operating hours: 30,629 h, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, product height (max.): 20 mm, Laser cutting machine including paternoster! Machine serviced by manufacturer in 2023! LASER CUTTING MACHINE TECHNICAL DETAILS Laser Laser power: 4,000 W Peak power: 500 W Laser source: FANUC AF 4000 E Principle: c2-laser (AC-HF) Laser wavelength: 10.6 µm Laser stability: +/- 1 % Laser consumption: approx. 10 l/h Travel Range and Cutting Parameters X-axis travel: 3,070 mm Y-axis travel: 1,550 mm Z-axis travel: 200 mm Table load: 850 kg Material thickness (mild steel ST 1203): 20 mm Cutting speed: 0 to 20 m/min X-axis travel speed: 80 m/min Y-axis travel speed: 80 m/min Simultaneous axis: 113 m/min Z-axis travel speed: 60 m/min Control system: GE Fanuc Series 160 I-LW MACHINE DETAILS Operating hours: 30,629 h Dimensions & Weight Dimensions: 8,000 x 3,400 x 2,400 mm Weight: 16,000 kg EQUIPMENT Documentation/manual Cooling unit Safety light barrier Dry separator Keller L-CUT Transformer RIEDEL PC 315.21-ME LAS PATERNOSTER TECHNICAL DETAILS Maximum sheet weight: 3,000 kg Sheet thickness: 1 to 20 mm Maximum sheet size: 3,000 x 1,500 mm Minimum sheet size: 150 x 150 mm Dsdpfx Aexc E Dqjhuecp Lifting traverse load capacity: 3,000 kg MACHINE DETAILS Dimensions & Weight Dimensions: approx. 6,400 x 5,000 x 8,000 mm Weight: approx. 8,000 kg EQUIPMENT Loading bay Unloading platform Lifting traverse Pallet changer Vacuum traverse

Condition: good (used), Year of construction: 1991, transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer Dodpfxoru Ra Ie Ahuocp -Manufacturer: Rohde, transformer autotransformer type SPAR YNAO -Power: 300 kVA -Voltage: Pri. 440V/sec. 380V/60Hz -Technical data: see photo type plate -Dimensions: 1000/570/H760 mm -Weight: 388 kg

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, working width: 1,350 mm, overall weight: 10,000 kg, input current: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding width: 1350 mm Dcsdpexp Hvnjfx Ahusp CROSS/LONGITUDINAL/LONGITUDINAL Machine Base Conveyor unit with a single transport belt, adjustable feed speed from 3 to 15 m/min by frequency inverter, including transport belt cleaning device. Constant working height of 920 mm. Automatic adjustment for various workpiece thicknesses (3 - 80 mm) via motor-driven movement of the upper machine section. The lifting gear’s toothed belt is dust-protected, and its operation is monitored via the integrated control cabinet. 1. Cross Sanding Unit Belt dimensions: 5,400 x 150 mm Drive power: 13/17 kW Sanding belt with additional blast tube for belt cleaning, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning system, and belt alignment control. Includes a door with glass window. 2. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Drive power: 13/17 kW Belt with double cleaning nozzles, wear-resistant brake unit, automatic belt length compensation, sanding belt operation counter to feed direction, intermittent belt cleaning, and infrared belt control. The front roller (steel) has an eccentric bearing for light calibrating, controlled from the operator terminal. 3. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Belt speeds: 0.5 – 18 m/s Drive power: 17 kW with frequency inverter Continuously adjustable sanding belt speed, double cleaning nozzle setup, wear-resistant brake unit, automatic belt length compensation, counter-feed direction sanding, intermittent belt cleaning, and infrared belt control. 4. Brush Roller Unit Centrally height adjustable, includes extraction hood and press-on roller. Roller diameter: 150 mm Drive power: 1.5 kW Bristles: fiber 5. Workpiece Suction Device Ensures safe transport of workpieces shorter than 500 mm in the feed direction, with integrated extractor fan. Voltage: 400 V, 50 Hz Belt exchange: left Operator terminal: left 6. Ionization Bar (from above) Removes static electricity, including high-voltage transformer. 7. Workpiece blow-off device with rotating compressed air nozzles inside the frame. The machine is ready for operation at your facility after mechanical and electrical overhaul by an authorized Heesemann service partner. Fitted with a new conveyor belt. Commissioning and training at your site may be arranged subject to negotiation. Transport costs negotiable – loading included in the price. If you have any questions, feel free to contact me. Paweł Szczepański +48 795 517 258

Condition: excellent (used), Year of construction: 2015, Netstal EVOS 5500-2000 Injection Molding Machine Year of manufacture: 2015 Very compact, hydraulic, three-plate clamping unit with encapsulated lubrication system, ensuring an oil-free environment in the mold space. High-precision and wear-resistant linear guides guarantee maximum mold longevity and increased machine availability. The hybrid injection unit features a modular design and a flexible performance package (metering, clamping, injection) that can be adapted to specific applications. The highest plasticizing performance and optimal melt quality are ensured by selecting process-appropriate components. Servo-electric metering drive and state-of-the-art valve technology guarantee energy-efficient operation. Technical parameters Certification: CE in accordance with EU Directive 2006/42/EC (EN 60204, etc.) Mold installation height: 600–1050 mm Injection unit drive: metering axis speed up to 420 rpm, torque 2400 Nm Injection unit Injection speed: maximum dynamics thanks to high-performance servo valve technology Screw: 62 mm diameter, 25.2D length, version B – Three-zone screw made of hardened, wear-resistant tool steel – Injection pressure: 2400 bar – Injection volume: 749 cm³ Dcjdpfjxl Ul Ajx Ahusp Clamping unit Ejector force: 123.2 kN Main drive: Eco Powerunit 55 kW – Dual pump system with hydraulic accumulator – High-efficiency synchronous drive – Adaptive control technology for maximum energy efficiency Oil cooling: supply water temperature 35°C Base Cylinder head with open nozzle, prepared for pneumatic control Guide bushing R = 35 mm, through-hole D = 5 mm Mold plate hole pattern: Euromap standard Centering and ejector system Centering on nozzle-side plate: D = 125 H7 x 20 mm (Euromap) Through-hole in moving platen: D = 80 mm Ejector hydraulics positioned on the operator offside Ejector hole pattern: Euromap Ejector controlled Mold hydraulics 4 hydraulic circuits for auxiliary functions (ejector, cores, nozzle pins) Electrically controlled check valves in circuits A + B Free configuration of functions with position protection Nozzle hydraulics with needle shut-off 4 hydraulic circuits Flow speed and pressure manually adjustable Open/close function Special software: cascade control Pneumatics and cooling Water cooling battery and hot runner circuit – 4-section, switchable Pneumatics: 2x 3/2 valve, capacity 890 l/min Location: on operator offside at nozzle-side platen Electronics / Software / Interfaces Frequency: 50 Hz Power supply: 400V, 3P + N + E, tolerance ±10% (transformer required for larger deviations) Surge protection Mold heating: – 4 circuits at 3.3 kW each – 8 circuits at 0.75 kW each Connectors: HAN 16E for power and sensors, Euromap 14 Sockets: – 2x 16A CEKON (main switch-controlled) – 1x 32A CEKON with RCD (FI) switch Interfaces: – Euromap 15 – full implementation (parts 1–5) – SPC (Statistical Process Control) – Euromap 66 (control of 5 heating/cooling units) – Euromap 67 (robot interface for ejector and hydraulics) External fault signals: 2 inputs in control cabinet Operator identification: PIN

Condition: excellent (used), Year of construction: 2000, A horizontal machining center from the manufacturer Mori Seiki is being offered here. 12 machine pallets are included in the delivery. Djdpfxewn Hiuo Ahuscp The machine is equipped with glass scales and therefore offers high precision. The machine is in very good condition and can be viewed in our hall. The machine will be loaded onto a truck free of charge. Manufacturer: Mori Seiki Type: SH-403 Year of manufacture: 2000 Control: Mori Seiki MSG-501 (Fanuc) Technical data: Travel paths X-Y-Z: 560x510x510 mm B-axis travel: 0.001° (360,000 positions - full-value B-axis) Rapid traverse X-Y-Z: 42 m/min Spindle speed: 12,000 rpm Spindle motor: 22 kW Tool holder: ISO 40 Tool magazine: 180 positions Tool change time: 1.3 s Interference circle: max. 610 mm Pallet size: 400x400 mm Number of pallets: 2 Total power requirement: 67 kVA Required space: 5500x4000 mm Machine dimensions: 5400x2500x2800 mm Machine weight: 11,500 kg Scope of delivery: spindle internal cooling, Knoll coolant system, chip conveyor, transformer, 12x machine pallets

Condition: used, mileage: 656,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, overall weight: 26,000 kg, fuel type: diesel, color: silver, axle configuration: 3 axles, next inspection (TÜV): 06/2024, gearing type: automatic, emission class: euro6, loading space volume: 84 m³, loading space width: 2,480 mm, loading space length: 8,100 mm, loading space height: 2,200 mm, Year of construction: 2018, total width: 2,600 mm, total height: 3,650 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 06/2018 * SAF axles * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: Dcsdjvcuddopfx Ahusp EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand OKUMA Model OSP-P300S-H Movement Y-Axis Movement 160 Additional Equipment Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) Dodpfx Ajxg Umpohujcp 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 6": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This 5-axis OKUMA MULTUS B300 II W was manufactured in 2016. It features an ASA 8 spindle offering 5,000 rpm and 65 mm bar capacity, capable of handling a max turning diameter of 630 mm. It includes a high-pressure coolant preparation of 70 bar, a continuous B-axis with HSK63, and a tool magazine with 60 positions, optimizing both turning and milling capabilities. If you are looking for high-quality turn-mill operations, consider this OKUMA machine. Contact us for more information about this machine. Application Types Turning

Condition: used, operating hours: 45,000 h, Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow.  Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 2005, forms the bottles at the core of the process. Notably, this machine transforms preforms into finished bottles using high pressure compressed air. Therefore, SIDEL technology ensures precise shaping and optimizes PET material usage, minimizing waste. Filling Monoblock The Sidel 36 36 9 filling monoblock, also from 2005, performs rinsing, filling, and capping in a single compact unit. This design maximizes space efficiency and reduces transfer times between stages. Consequently, the volumetric filling system delivers precise dosing, which ensures the final product quality. Labeling Machine The PE Labellers ROLLMATIC labeling machine, from 2005, applies wrap around labels to containers. Advanced technology positions labels accurately, thus enhancing the finished product appearance. This system works perfectly for PET water bottles, meeting the line speed and quality requirements. Shrink Wrapper The Sidel Cermex shrink wrapper, from 2005, performs secondary packaging. Specifically, the machine uses shrink film to create compact and secure packs. As a result, this process enhances logistics and product distribution while protecting items during transport. Conveyors in the Used Bottling Line SIDEL for still water up to 12000 bph The line operates with a complete system of conveyors, both air and ground. These conveyors maintain a continuous and uninterrupted flow between production stages. Additionally, the conveyors minimize downtime and ensure high operational efficiency. Technical advantages of the line This used bottling line delivers reliability and robustness, even with its 2005 manufacturing date. Moreover, all machines ensure a long operational life and reduce maintenance costs. The system efficiently bottles still water, ensuring a specific and contamination free process. Furthermore, SIDEL machinery integrates seamlessly with complementary components, such as the labeling machine and shrink wrapper, to maintain a uniform production flow. With a speed of 12000 bottles per hour, this line supports companies with consistent production demands. Conclusion The used SIDEL bottling line for still water up to 12000 bottles per hour provides a reliable and highly efficient solution for the bottling sector. Therefore, with robust machinery and an optimized configuration, it meets the needs of technicians and experts requiring a complete solution for producing PET water bottles. Dodpfjvgva Uex Ahujcp  

Condition: ready for operation (used), Year of construction: 2005, functionality: limited functionality, spindle speed (min.): 31,000 rpm, Equipment: rotational speed infinitely variable, We are offering for sale, due to a trade-in, a TOS BDU 250 A internal cylindrical grinding machine with the following specifications: Grinding diameter: 250 mm Maximum longitudinal table travel: 600 mm Maximum internal diameter: 250 mm Smallest diameter: 10 mm Workpiece spindle speed: 25; 45; 80; 140; 250; 450 rpm Internal grinding spindle mount: Currently Ø 100 mm Maximum diameter without chuck guard: 470 mm Dcsdpfx Aow Rllxshujp Adjustment of grinding headstock: 15° and 90°, mounted on an oscillating longitudinal table. Equipment: - Coolant tank - Hydraulic unit - Used internal grinding spindle - Machine lamp - Documentation and operating manual Machine information: Machine fault (transformer faulty, automatic operation possible only without dressing device).

Year of construction: 2018, condition: as good as new (ex-display), Renner REKO 400/50 Craftsman assembly compressor Dsdpfx Ahjd Dhwhouecp Drivable or stationary? You decide this yourself according to your individual conditions of installation. We deliver as standard drivable as pictured. Lots are added to additional oscillating metals. By replacing the wheels with vibrating metals, you simply transform them into an elastic, stationary system if necessary. A reliable wedge belt drive as well as low speeds and piston speeds ensure the safe supply of compressed air. The compressor is operated at 230 V (also available with 400 V), automatically controlled via pressure switches with overload protection and delivered ready-to-connect and ready for operation with cable, plug and pressure detector. For models of 90 litres of container volume or more, the Condor pressure switch with operating hour counter is included. Technical data Extraction performance: 385 l/min Delivery quantity: 270 l/min max print: 10 bar Nominal output: 2.2 kW Nominal voltage: 230 V Sound level: 85 dB Boiler: 50 l Compressor speed: 890 udmin Cylinder/Stages: 2/1 Weight 65 kg Dimensions (LxBxH) 810 x 460 x 850 mm

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 2700071001, type of input current: three-phase, input frequency: 50 Hz, nominal power (apparent): 1,600 kVA, Transformer from dismantling. Removed due to replacement with another one of higher power. Throughout its entire period of operation, the transformer underwent regular insulation resistance tests. The last test was valid until May 2025. TRANSFORMER AEG - MEFTA MEFTABLOK - used 1600 kVA TYPE: TZM 1600/15 No.: 2700071001 YEAR OF MANUFACTURE: 1997 POWER: 1600 kVA Dedjxm S Spspfx Ahuocp NUMBER OF PHASES: 3 FREQUENCY: 50 Hz

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 20 [kW] - Spindle speeds : 24000 [rpm] - Number of spindle hours : 4877 [h] LINEAR AXES Dodpfx Ahjxcqadjuecp - Travels on X/Y/Z axes : 700/420/380 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 25 - Tool exchange time : 0.9 [sec] TABLE - Table dimensions : 840/420 [mm] - Maximum weight upon table : 400 [kg] - Distance table / spindle nose (min./max.) : 200-580 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 16 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1650/2950 [mm] - Machine height : 2550 [mm] - Machine weight : 3400 [kg] MACHINE HOURS - Number of hours under power : 14493 [h] - Number of working hours : 5307 [h] EQUIPMENT - CNC : Siemens 840D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor - Tool probe : Renishaw OTS - Workpiece probe : Renishaw OMP40-2 - Electric transformer

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,212 h, functionality: fully functional, machine/vehicle number: B151104, turning length: 620 mm, turning diameter: 190 mm, travel distance X-axis: 345 mm, travel distance Y-axis: 45 mm, travel distance Z-axis: 1,240 mm, TECHNICAL DETAILS Max. turning diameter: 190 mm Max. turning length: 620 mm Chuck size: 165 mm Swing over cross slide: 190 mm Axes Travel X1/X2 axes: 345 mm / 167.5 mm Travel Z1/Z2 axes: 1,240 mm / 685 mm Y-axis travel: ±45 mm B-axis travel: ±91° Rapid traverse X1/X2 axes: 16 m/min Rapid traverse Z1/Z2 axes: 40 m/min Servo-controlled: 0.001° Hirth coupling: 1° Spindles Spindle speed: 5,000 rpm for 51 mm (L/R) Spindle speed: 4,500 rpm for 65 mm (left only) Bar capacity, left spindle: 65 mm Bar capacity, right spindle: 51 mm Drive power left: 18.5 kW Drive power right: 15.711 kW Turrets Turret for driven tools: 12 positions Turret for turning tools: 24 positions Tool size (square/round): 25 mm / 32 mm Control: Fanuc 18 iTB MACHINE DETAILS Net weight: 12,500 kg Automatic operation hours: 16,212 h Feed hours: 8,392 h Control "on" hours: 27,816 h EQUIPMENT Spiral interpolation Left side air blast IRCO interface Collision monitoring NT Nurse NC kit Spindle speed correction switch for both spindles Work area lighting Automatic central lubrication for all axes Mobile coolant tank Dedpfow Hyi Ssx Ahuscp Door interlock Transformer CE marking Chip conveyor Coolant and air blast through right spindle 5 free M-function pairs Finished parts gripper G Parts catcher tray A for material remnants Polygon turning function Electronic handwheel Spann top chuck GR 65 modular A6 3-jaw chuck, right side

Condition: used, Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph The Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph ensures good-performance bottling for mineral water, sparkling water, and carbonated soft drinks (CSD). Specifically, it processes PET containers in 1.5 l format, using isobaric filling technology to preserve the quality of both carbonated and non-carbonated beverages. Moreover, the bottle neck standard is PCO 1810. In addition, this Used Bottling Line KRONES for still, sparkling water and CSD – 12000 bph integrates synchronized machines, thereby optimizing every production step, from preform feeding to final packaging and palletizing. Preform Feeding and Preparation in this Used Bottling Line KRONES The process begins with the preform feeder, which continuously supplies preforms to the preform inverter. As a result, the line maintains a smooth and consistent flow, with correct alignment of preforms before the blowing process. Blow Molding Machine Next, the blow molding machine—a Krones Contiform Compact 10, year 2001—uses a Siemens S5 control system to manage heating and blowing phases. Consequently, it transforms preforms into precisely shaped PET bottles ready for downstream processes. Air Conveyors of the Used Bottling Line KRONES for still and sparkling water Once the bottles are formed, they are transferred via Krones AirCo air conveyors, model AirCo, year 2011. These conveyors extend for approximately 110 meters. Furthermore, they are controlled by inverters and a Siemens S5 controller, ensuring the transport to the next station. Mixing and Carbonation Unit Before filling, the product passes through the mixing and carbonation unit, a Krones MS, year 1992. This system mixes water and syrup, and then carbonates the product with CO₂ for sparkling drinks, or injects nitrogen for still water. Notably, the unit ensures continuous operation and mixing, thus maintaining product consistency throughout production. Filling Monoblock Following the mixer, the filling monoblock—Krones VK PET 100 SV K, year 1993—comes into action. Controlled by a Schleicher system, it includes: Bottle rinsing unit Isobaric filling machine, suitable for both still and carbonated beverages Capping unit for PCO 1810 PET bottles Dodpowa Tqcefx Ahuecp CIP (Cleaning-In-Place) connections Capacity to handle 1.5 l format Importantly, this unit represents the heart of the line, performing several critical functions within a compact and coordinated block. Labeling Machine Immediately after filling, a Krones labeling machine, model Canmatic, year 1997, applies labels to PET bottles with precision. As such, it ensures accurate positioning and high throughput, contributing to a professional final presentation. Shrink Wrapper Subsequently, the shrink wrapper—Dimac Green Star Big, year 2011—forms multipacks using shrink film.

Year of construction: 1990, condition: good (used), Make: Fuji Type: automatic packaging machine Model: FW-3400 Year of construction: 1990 Frame: steel, lacquered Dimensions: L x W x H = 4.500 x 1.100 x 1.600 mm Product width: max 140 mm Product height: max. 60 mm Product length: 80 - 350 mm (range cut length) Capacity: 20 - 300 packages / minute Other: foil width up to 430mm separate mobile transformer cabinet digital display with controls English documentation Dedpsfx Sqgofx Ahuocp as-is or adjusted to customer needs

Condition: new, functionality: fully functional, Year of construction: 2025, Tube Laser Cutting System Ideal for Entry-Level Applications. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for workshops, metal fabricators, and others looking to step into tube laser processing, this laser offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your production with precise cuts and user-friendly technology, adding value to your operation. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Maximum Tube Diameter: Ø250 mm - Maximum Square Profile Dimensions: 160x160 mm - Maximum Rectangular Profile Dimensions: 200x150 mm - Minimum Tube Diameter: 16 mm - Maximum Material Length: 6000 mm - Minimum Remnant Length: 65 mm - Unloading Length: 3000 mm - Semi-automatic unloading unit: optional (6m) - Maximum Material Weight: 58 kg/m - Maximum Total Workpiece Weight: 350 kg - Profile types that can be cut: Round, square, rectangular, elliptical - Open profile types that can be cut: I, C, L - Maximum open profile dimensions: 240x240 mm Dynamics: - X-Axis: 40 m/min - Y-Axis: 94 m/min - Z-Axis: 30 m/min - A-Axis: 510 °/s Accuracy: - Positioning Accuracy: ±0.2 mm - Positioning Variation: ±0.05 mm Dodpfxjrkntce Ahuocp - Tube Center Detection with Capacitive Sensor: Yes Additional Available Configurable Options. LASER POWER: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar Air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar Air) - CNC oscillating head (+/- 45°) - Semi-automatic front loading system - Unloading table (6m) with conveyor - Unloading table (3m) with conveyor - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud License + D-Mobile + Smart Watch - STEP file importer

Condition: used, Year of construction: 2018, Heller HF3500 Base Machine HF 3500 APC Equipment Package POWER Dcodsxck I Uepfx Ahuep NC Swivel Rotary Table for 5-Axis Machining with Tilted Rotary Axes Travel Paths X710/Y750/Z710 Plane Transformation (CYCLE800) Tool Extraction Execution in accordance with EC Machinery Directive with Declaration of Conformity and CE Marking Precision Water-Air Cooling Unit (Compressor cooler for cooling the direct drives of A- and B-axes as well as for spindle and control cabinet cooling) HSK-A 63 Tool Holder according to DIN 69 893 Standard control panel at the tool setup station (chain) Workpiece setup station, pallet manually rotatable and lockable in 90° increments (cannot rotate freely with media interface) Workpiece clamping mechanical Two pallets as zero-point clamping systems with DIN hole pattern in base machine Scraper belt conveyor for wet machining Main control console in desk design with 24" screen with multitouch function and “HELLER Operation Interface” Equipment/Accessories PC 63 i Power Cutting Unit (12,000 rpm, 45 kW, 228 Nm) Receiver for wireless probe, make RENISHAW (incl. HELLER measuring cycles only with Siemens) Wireless probe with tool holder and probe insert, make RENISHAW RMP 60 Tool magazine with 80 places, chain version Fast drill breakage detection Comfort control terminal at tool setup station (chain) Enforced-Drive in A – Reinforced torque drive for the A-axis (for simultaneous 5-axis machining) Coolant purification system, paper band filter TMF600, ICS 70 bar with frequency-controlled high-pressure pump, work area rinsing Coolant chiller (water-air / type: compressor) Extraction system for emulsion Door window air blow device for work area door Siemens SINUMERIK ONE Process-integrated tool monitoring (IPM) LED status light red - yellow - green Technology package milling (ONE Dynamics 5 axes) Collision avoidance strategy AutoCal (Automatic Calibration) Handheld control device SINUMERIK HT 2, make Siemens Interface for handheld control device Extension package Standard-MF-II PC keyboard for main control console Extension to 4 pallets Additional equipment not included in the purchase price (available separately) Hyper Mill post-processor 3D machine model STP

Condition: used, operating hours: 4,000 h, Used Line for olive oil production PIERALISI 700 kg/h Overview of the Line The Used Line for olive oil production PIERALISI 700 kg/h offers a complete and professional solution for the transformation of olives into extra virgin olive oil. Manufactured in 2014, this processing line includes exclusively PIERALISI machines, a benchmark brand in the olive oil sector. With a rated capacity of 700 kg/h, the system suits medium-sized producers who require durability, consistent performance, and high processing quality. Consequently, it provides an ideal balance between efficiency and compact footprint. Furthermore, it adapts well to various operational contexts. Machine Condition and Materials Dcedpfowqxhuex Ahuep The seller has completely overhauled and repainted all machines in the line. As a result, the system is in excellent working condition. It includes full electrical and mechanical safety protections, which ensures compliance with modern standards. The manual control panel operates in perfect condition and comes with updated PDF wiring diagrams. In addition, all surfaces that come into contact with the product are made of AISI 304 stainless steel, which guarantees food-grade quality and long-term resistance to corrosion. Thus, the line ensures hygienic and durable operation. Initial Processing Phase The process begins with a receiving tank PIERALISI EFFE 3, where the olives enter the line. Immediately after, a feeding pump PIERALISI 2 Cv transfers the product from the tank to the crusher. This pump, which has a new stator, operates in like-new condition and is paired with a 140-liter stainless steel tank. Moreover, the pump design supports stable and continuous flow. It feeds the olives into the crusher PIERALISI EFFE 3, which features a twin-screw system with cycloidal gears. Therefore, it ensures efficient and uniform paste production. In this way, it prepares the raw material for malaxing. Malaxing and Pasta Handling After crushing, the olive paste proceeds to the malaxer PIERALISI with a 2-ton capacity. If required, the operator can divide the malaxer into two separate vessels, each with an independent outlet. This option allows more control over the feeding process to the decanter. Additionally, it improves flexibility in handling various olive batches. For this reason, the malaxing stage becomes highly adaptable. Meanwhile, it maintains optimal mixing conditions for oil extraction. As such, the line supports both continuous and batch workflows. Separation and Oil Extraction The PIERALISI EFFE 3 decanter centrifuge forms the core of the Used Line for olive oil production PIERALISI 700 kg/h. This unit automatically separates the solid pomace from the liquid phase and supports a capacity of 700 kg/h. Importantly, it operates in both two-phase and three-phase modes, depending on the processing goals. Subsequently, the separator PIERALISI P1500/2000 (10 Hp) performs the final clarification step.

Condition: used, Used Line Pieralisi Jumbo 2 for olive oil production 2000 kg/h General Description of the System The Used Line Pieralisi Jumbo 2 for olive oil production 2000 kg/h provides a complete technical solution for transforming olives into oil. All machines, except for the washing machine and the progressive cavity pump, belong to the Pieralisi Jumbo 2 line, manufactured in 1995. Currently, the entire line remains in storage and includes active and functional safety devices. Therefore, the system is ready for deployment. This setup operates in a fully continuous cycle and delivers a nominal capacity of 2,000 kg/h, ensuring stable productivity throughout each phase. Washing and Transport Section Initially, the Used Line Pieralisi Jumbo 2 for olive oil production 2000 kg/h uses a TYPE B olive washing machine to remove soil, leaves, and impurities through water flow and filter grids. After cleaning, a screw elevator gently transports the olives to the crusher. Consequently, it minimizes mechanical stress and prevents premature crushing. In this phase, precision is essential to protect downstream equipment and ensure consistent paste quality. Moreover, it contributes to the overall efficiency of the process. Djdpfx Ahjwmkqyjujcp Crushing and Malaxing Next, the crusher receives the olives and breaks them down using a hammer-based mechanical system. This procedure generates a uniform paste, which then enters the malaxing stage. The line features three malaxers of 900 kg each, which operate continuously. Additionally, they offer temperature and residence time control. As a result, this phase facilitates the coalescence of oil droplets. Furthermore, it significantly improves extraction efficiency in the next step of the Used Line Pieralisi Jumbo 2 for olive oil production 2000 kg/h. Notably, all components maintain temperature integrity throughout the cycle. Transfer and Solid-Liquid Separation Subsequently, a progressive cavity pump, model 60, transfers the paste from the malaxers to the decanter centrifuge. The pump guarantees a steady and non-pulsating flow. In turn, the decanter separates oil, pomace, and vegetation water continuously. With a nominal capacity of 2.5 tons/hour, this decanter exceeds the system’s average flow. Hence, it offers operational flexibility and surplus processing capacity. In addition, the high-capacity design reduces the risk of bottlenecks during peak loads. Clarification and Process Control After separation, the system channels the oil to automatic vertical separators rated at 1,500–2,000 l/h. These units perform final clarification via high-speed centrifugation. At this stage, the control panel actively manages all system parameters, including temperature, timing, and safety states. Simultaneously, a thermal panel assists in maintaining thermal stability across critical points. Therefore, operators can monitor the full cycle with precision. Overall, this integration enhances consistency and simplifies routine supervision.

Condition: used, Used Filling Line for CSD 12000 bph Line configuration for isobaric filling of carbonated soft drinks The Used Filling Line for CSD 12000 bph fills PET bottles with carbonated soft drinks using isobaric technology. Since the isobaric process maintains pressure during filling, it preserves CO₂ saturation effectively. The system reaches a nominal output of 12,000 bottles per hour for 1.5-liter formats. Furthermore, it uses PCO 28 mm caps and operates on the Euro pallet packaging standard. Overall, the configuration is ideal for medium- to high-output CSD production. Djdewcz Alopfx Ahuecp High-pressure air supply for the blowing process in the Used Filling Line for CSD 12000 bph  A high-pressure compressor, manufactured by SIAD (model MS3/1442-A3, year 2000), supplies compressed air to the blow molding machine. Specifically, it includes an air dryer and a 2000-liter air receiver to stabilize airflow. As a result, the compressor ensures consistent bottle formation. In addition, the unit supports continuous operation under high load, which is essential for large-scale PET blowing systems. Therefore, this component remains critical to upstream efficiency. Blow molding machine for PET preforms with mold cooling system The line includes a Sidel SBO 10 Series 2 blow molding machine (1999), which transforms PET preforms into bottles. Although molds are not included, the machine features a box tipper, a preform feeder, and a SOGEQUIP water cooling system for the molds. Consequently, the setup supports high-speed bottle production. Moreover, the system enables uninterrupted feeding toward the filling block, thereby minimizing downtime. Notably, the machine’s robust construction guarantees long-term reliability. Rinser–filler–capper block with 60 valves and isobaric technology SIDEL Alsim manufactured the central filler block in 2000. It integrates 60 rinsing heads, 60 isobaric filling valves, and a 10-head Alcoa capper. Thanks to this configuration, the system achieves high throughput while maintaining pressure consistency. In particular, the isobaric filler limits CO₂ loss and reduces foaming, which is crucial for CSD bottling. Additionally, it allows quick format changes, making the line adaptable to different production needs. Automated high-capacity mixing system in the Used Filling Line for CSD 12000 bph  The Moravek 240C mixer, installed in 2000, prepares and carbonates the beverage at a flow rate of 24,000 liters per hour. It combines syrup, treated water, and CO₂ in controlled ratios. Importantly, the mixer ensures product consistency before entering the filler. In turn, this reduces process variability. Similarly, its high capacity aligns perfectly with the filler’s speed, avoiding bottlenecks and enhancing line balance. Automated labeling and packaging system The post-filling section consists of a Krones Contiroll labeling machine (2004), which applies wrap-around OPP labels.

Condition: used, Year of construction: 2023, Used adhesive labeling machine PE labelers overhauled up to 6000 BPH Complete transformation from a mechanical machine to an electronic machine Dcsdpfxovlnv Ej Ahuop Used rotary labeler overhauled up to 6000 complete replacement of the head with new plates, motors, boards, and double jacks for optical centering replacement of groups with 3 new adhesive groups PE labeler or PackLab type. complete overhaul of the glue group for the l-shaped seal for the PE labelers review of seal stretching pliers new electrical panel new complete and CE standard protections for the PE labelers installation of the touchscreen and plc control panel new certifications for Used labeler rotary machine overhauled up to 6000 a bottle passage format for the Used adhesive labeling machine overhauled up to 6000 composed of: auger entry/exit star counter star 11. one seal format per glue group for adhesive rotary labeling up to 6000 complete with: 1 warehouse 3 blades 1 hook drum Delivery time equipment of the Used adhesive labeling machine overhauled: This PE labeler can be serviced and delivered in approximately 90 working days from the order and payment of the first deposit. It is important to approve all technical drawings and label measurements for the PE labelers. This allows orders for replacement materials for the PE labelers to be prepared in an efficient time. In this particular historical period, we encounter very long delivery dates for electrical materials. Is for this reason that it is very important to plan the entire project in the correct direction to avoid wasting time for the PE labelers overloaded. For the installation of the PE labelers we only use our own direct workers, to give safety to our customers. We follow the entire process from start to finish and to the commissioning of the new or used machinery.

Condition: used, operating hours: 52,428 h, Used Bottling Line for Sparkling Beverages up to 9000 bph The used bottling line for sparkling beverages up to 9000 bph effectively manages the production of still and sparkling water, as well as soft drinks, in PET containers. This line features interconnected machines, which, together, ensure a continuous and effective workflow. Additionally, each machine in the line operates in isobaric mode, optimizing filling for sparkling beverages. As a result, the system handles up to 9000 bottles per hour, making it a powerful solution for high-output bottling. Containers and Product Type in the Bottling Line For sparkling beverages The system, specifically designed to fill PET containers, provides durability and lightness, making them ideal for both sparkling and still beverages. Furthermore, this line specializes in processing still and sparkling water, along with other non-alcoholic drinks. Using isobaric technology, the line effectively preserves effervescence throughout filling, which, in turn, maintains product integrity and enhances taste quality. Blow Molding Machine – SMI EBS 2016 Dsdevgvbropfx Ahujcp The SMI EBS blow molding machine, model EBS from 2016, forms PET containers directly on-site. Specifically, it transforms preforms into bottles, ensuring consistent size and container strength. Therefore, this integrated blow molding machine increases efficiency by minimizing reliance on external bottle supplies and maintaining high-quality production standards for the CFT Bottling Line For sparkling beverages. Filling Monoblock – CFT Master EW 32/32/8 2012 The CFT Master EW 32/32/8 filling monoblock, a central component of the used bottling line for sparkling beverages up to 9000 bph, combines rinsing, filling, and capping in one compact unit. Notably, this system uses isobaric filling to keep internal container pressure stable, which is especially beneficial for carbonated beverages. In this way, the setup reduces waste and effectively protects the product’s quality. Labeling Machine – P.E. Labellers Universal M/S 15T/960/3S – 4E 2009 The P.E. Labellers labeling machine, model Universal M/S 15T/960/3S – 4E from 2009, applies labels to PET containers with precision. Label application helps with product identification, in addition to ensuring regulatory compliance. Furthermore, this model offers flexibility and accuracy, especially for containers of various shapes and sizes for the CFT Bottling Line For sparkling beverages Sleevering Machine – Nortan NORTAN 50 2008 The Nortan NORTAN 50 sleevering machine from 2008 of the CFT Bottling Line For sparkling beverages adds protective sleeves to containers, enhancing aesthetics and protecting them from contamination. In addition, this process proves essential for beverages stored or transported over long periods. Thus, the used bottling line for sparkling beverages up to 9000 bph benefits from this feature by improving product durability on store shelves.