Used Toilet Paper Machine for sale (84,013)

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Hfedou Tg Spopfx Ag Ueb Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: good (used), Wohlenberg 92 Paper Guillotine The device is in perfect condition, very low mileage. An unusual machine on the market. This is the newest model, currently in production. Hedpfx Aew Ht Uhog Ujfb In one hands from new. Under a service contract until the very end. Year of production 2011. Technical data: Cutting width: 920 mm Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Equipment: – programmer with 19” touch screen monitor – CIP-3 and CIP-4 operation, visualization of cutting on the monitor – memory expansion via USB, possibility of connecting the machine to the network – photocells – air table – cutting line – chrome table surface – rear saddle control on a servo motor – super fast work, always stops at „0” – hydraulic clamp with smooth force regulation – user manual – set of tools – sheet metal for clamp – tapping block – spare knife

Condition: used, Year of construction: 2004, functionality: fully functional, Perfecta Trimmstar 110, age 2004 Equipped with: • suitable for: three side trimming of book blocks and brochures • works in-line connection with book production lines or manual feeding Hfodpex Ndpzefx Ag Ujb • standard equipment • touchscreen • Max. size trimmed 300 x 440 mm • Min. size trimmed 100 x 125 mm • Size (untrimmed) Max. 320 x 460 mm; Min. 85 x 115 mm • Capacity: max. 110 cycles/min

Condition: used, Year of construction: 2011, Machine number 8161027 Built in 2011 Max. paper length 12 cm Max. paper width 78 cm Air table Yes Side table left Yes Side table right Yes Photo cells Yes Hfedpfx Agsxx Tu As Ujb Length x width x height 2000.0 × 2280.0 × 1700.0 Weight 1300 kg

Condition: used, Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, cutting width (max.): 800 mm, insertion depth: 800 mm, insertion height: 150 mm, cutting length (max.): 800 mm, overall weight: 500 kg, type of input current: three-phase, total width: 160 mm, total length: 200 mm, input voltage: 400 V, Equipment: documentation/manual, safety light barrier, The MOHR 80 cutter is engineered for single-shift operation and features a precise, gentle swing cut actuated hydraulically, allowing the dwell time of the knife at the lower dead point to be tailored to the material. The ultra-smooth stainless-steel table, fitted with air jets, makes material handling effortless. Clamping pressure is infinitely adjustable via a scaled rotary knob to accommodate a wide range of cutting materials. High-visibility LEDs clearly indicate the cutting line for the operator. Operation is carried out through an ergonomically positioned 18.5’’ touch-screen display. The machine can store up to 1,998 cutting programs for rapid recall and flexible adaptation of recurring sequences. Integrated into a digital workflow, cutting data can be received directly from pre-press into Compucut® in ppf- or jdf-format, which then automatically generates the appropriate cutting program. A barcode reader enables automatic program retrieval and execution, effectively reducing set-up times to nearly zero. Process visualization graphically displays material handling, significantly minimizing error risk. To further optimize cutting quality, the pre-clamping time can be adjusted based on the material being processed. Key features: - Barcode reader for automatic creation and loading of assigned cutting programs via Compucut® - Process visualization for graphical representation of material handling, minimizing error risk - Rigid machine frame engineered for optimal stability, maximizing absorption of cutting forces and ensuring superior cutting accuracy Hodjxwnxgspfx Ag Ujfb - Minimal maintenance requirements thanks to the use of advanced materials Technical specifications: - Cutting width: 800 mm (31.49 in) - Feeding depth: 800 mm (31.49 in) - Maximum feeding height: 100 mm (3.93 in) - Clamping pressure: minimum 180 daN (397 lbs), maximum 2,700 daN (5,953 lbs) - Backgauge speed (return): up to 130 mm/sec (5.12 in/sec) - Minimum automatic cut without false plate: 15 mm (0.60 in) - Minimum automatic cut with false plate: 50 mm (1.96 in) - Dimensions (W × D × H): 1,430 × 1,970 × 1,500 mm (56.29 × 77.55 × 59.05 in)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: SQZK92S16, cutting width (max.): 920 mm, insertion depth: 920 mm, insertion height: 120 mm, 1. SQZK series coming with 15” color display and touch-screen from Japan 2. Storage: 200 programs, each program no limit with request 3. Max Backgauge Speed: 20m/min 4. Knife: Standard Knife 5. Hand wheel adjusting the pressure 6. Language: Multi-language Max.Cutting Width 920 MM Max.Cutting Length 920 MM Hfjdpfx Ajx Upvqeg Usb Max.Cutting Height 120 MM Max.Clamp Pressure 35000N Max.Cutting Speed 45time/min Main Motor 3kw Gross Power 4.3kw Net Weight 2200kg Gross Weight 2500kg Packing Size (L*W*H) 2280*1400*1850mm

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 68H1124, No minimum price – guaranteed sale to the highest bidder! Hjdpexyfhwsfx Ag Usfb By placing a bid, you commit to collecting the item by 31/12/2025!

Condition: good (used), Paper cutting guillotine Ideal 6660 The machine is 100% functional, after inspection like new. This is currently produced, the newest model. A spare knife included. Hjdpfjwud R Nsx Ag Ujfb Technical data: working width: 650mm stack height: 80mm minimum remnant: 25mm max. distance of the saddle from the knife: 610mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: used, Bohrunterlage mit Bohrbandmechanik inklusive eines Bohrbands / Drilling pad with drill band mechanism including a drill band Papierbohrmaschine / Paper Drilling machine Dürselen Corta PB 04 N  Baujahr / Year 2013 - Serial-No. PB04.01.03.1629 4 Bohrköpfe / 4 Drilling Heads Stapelhöhe / Stack high max. 50mm Einlegetiefe hinter den Bohrern / Depth behind the Drilling heads 42mm Lochabstand / Hole distance 31,7 - 293mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Hfodpfx Agjxn S Itj Usb

Condition: good (used), For sale Wohlenberg size 115 cm type MCS-2-TV. This machine works 100% with all standard accessories. Comes from the first owner and is very well maintained. The machine has been professionally disassembled and is placed on a sturdy pallet. Of course you are welcome to test this machine with us. We can arrange the transport/packaging for you and load it into a truck or container. Ask for a price including transport (location the Netherlands). Hjdpfx Agstyylle Uofb Regards Henk Hoos.

Condition: used, Year of construction: 1992, number of heads 4 serial no. 92.847 bore diameter 3-8 mm Hjdpfx Asxu Nt Tog Usfb

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 76745, cutting width (max.): 920 mm, insertion height: 120 mm, Year of production 2015 Technical data: Cutting width: 920 mm Hedpfx Agsx Upume Ujfb Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Machine can be inspected anytime. Works perfectly. Very well maintained. We are first owners.

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Technical data: Cutting length 610 mm 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz 3 kW power Weight 700 kg Hfsdpfxjvfukis Ag Usb The set includes: spare knife, shaft, operating tools, tapping block, manual.

Condition: as good as new (ex-display), functionality: fully functional, Very nice Horizon paper cutter for sale. Like new. Hfsdpfxew Ec S Te Ag Ueb Type APC-M-61. Cutting width 61 cm. Chrome main and side tables (left and right). With programmable eject function and hydraulic clamp. Complete with extra blade, new strip, and manual. Naturally, you are welcome to test the machine with us. We can arrange transport/packaging for you and load it into a truck or container. Ask for a price including transport (location: The Netherlands). Best regards, Henk Hoos.

Condition: used, Year of construction: 2000, number of heads 2 drilling capacity diameter min. 2 mm drilling capacity diameter max. 15 mm serial no. 230 spindle distance 45 - 120 mm bore depth 50 mm Hole distance 3/380 mm Hfedev T Nrqepfx Ag Ujb

Condition: good (used), Wohlenberg 132 TS ASE Paper guillotine Machine in perfect condition, ready for production. Year of manufacture 2015. Available immediately from stock. Equipped with the ASE automatic trim removal system. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes a variety of cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Hfodpowt Sq Ujfx Ag Uob Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools, and a conveyor belt.

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper cutting machine. Model C780-M8. This paper cutting machine comes from a government agency and has seen very little use. Complete with all standard accessories and chrome table. This machine is 100% operational. Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Please request a price including transport (location: the Netherlands). Regards, Henk Hoos. Hfjdpfx Agjw E I Elo Ujb

Condition: good (used), Polar Mohr 115 XT Paper Cutting Guillotine This machine is in very good condition, ready for production, after a service inspection. Low mileage. Year of manufacture: 2010. This is the most valued guillotine brand, a flagship product. A jogging and elevator are available for retrofitting. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with a 15″ color touchscreen display Air table Hsdpfx Aoxzumxog Uefb Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Hfodpfx Asx A Sddeg Ueb Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: good (used), Paper guillotine EBA 5260 The machine is 100% functional, after inspection in very good condition. This is the currently produced, newest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 520mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter Hfjdpfjvbb Rhex Ag Usb switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: good (used), Paper cutting guillotine QZYK 1370 DH-1520 The machine is fully functional, in perfect condition. After inspection, ready to work. Year of production 2022. This is the highest quality copy of the Polar Mohr guillotine. Technical data: Cutting width: 1370mm Hfodpfowt Sr Ssx Ag Uob Stack height: 165mm Programmer with color display Air table Photocells Chrome table surface Ball screw drive of the rear comb Optical cutting line Enlarged side tables with aeration Weight: 4200kg 380V power supply The set includes documentation, a set of tools, a tapping block, a spare knife and one in the machine.

Condition: good (used), Wohlenberg 132 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture 2008. Available immediately from stock. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes various cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Premium class cutting machines from the Wohlenberg brand are manufactured in Germany in Solms. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) Hfedpfxjw D E Sas Ag Uob – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools.

Condition: good (used), Paper cutting guillotine Perfecta 76 TVC Device in perfect condition, very low mileage. After general renovation in 2013. Technical data: Cutting width: 760 mm Stack height: 110 mm Weight: 1650 kg Power supply: 400 V Equipment: – programmer with touch screen – photocells – air table – cutting line – chrome table surface – enlarged side tables – hydraulic clamp with smooth force regulation – instructions Hfsdpfx Aow D E Sgeg Usb – full set of tools – plate for clamp – tapping block – spare knife

Condition: good (used), Ideal 5221-05 EP Digicut guillotine The machine is 100% operational, after inspection. This is the model with the richest equipment version. Technical data: working width: 520mm Hfodpfx Ajtxwzzeg Uob stack height: 80mm minimum remnant: 22mm max distance from the saddle to the knife: 520mm 230V power supply Basic features: The machine has a full EP programmer with the function of saving individual steps to the device’s memory hydraulic drive of the pressure beam, pressure force fully adjustable in the range of 200-1100N electromechanical knife and saddle drive automatic pressure synchronized with the cutting movement of the knife electronically controlled saddle adjustment knob with the ability to adjust the speed of its movement side tables The „SCS” security system includes: two-handed cutting start, electronically controlled automatic knife return from any position transparent covers on the front and rear table laser cutting pointer Additional equipment includes: a spare knife, a column, a set of tools, a paper stack tapping block, a pressing plate and documentation.

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in perfect condition, ready for production. Year of manufacture 2009. Available immediately from stock. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes various cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Premium class cutting machines from the Wohlenberg brand are manufactured in Germany in Solms. Distinguishing features of the Wohlenberg machine: Hodpfxowxtdtj Ag Uefb – Interactive user interface – 18.4” touch screen – USB interface – Ethernet interface – Windows CE operating system – Positioning by means of an electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1150 mm Maximum stack height: 165 mm Infeed depth: 1150 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4kW Net weight: 3200 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools.