Used Thermal Plate Processor for sale (14,361)

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 630 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 19 mm -Dimensions: see drawing in the photos Dodoxm R Ipjpfx Ahujkw -Dimensions total: 630/500/H75 mm -Weight: 162 kg

Condition: good (used), Year of construction: 2010, machine/vehicle number: 10043235408GCA, Automatic Feeder Automatic Thermal Laminating Machine Dedpfstpvimjx Ahuekw

Condition: good (used), Year of construction: 1979, Surface plate JOHANN FISCHER Aschaffenburg (hard stone), No. 73 669, year of manufacture 1979, dimensions 300 x 200 x 88 cm, mounted on 9 heavy-duty supports, weight approx. 6,500 kg. Dedjxva Siepfx Ahuskw

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° Djdpovn Al Hefx Ahujkw table height over floor 870 mm total power requirement 3 kW weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a standard geared brake motor via a chain connection to the main axle. the knives are of the highest quality. The optimal cutting angle secures the together with the sheet holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. We also have a Kapema manual swing bending machine, model KFS 20/20, with a segmented top rail for bending box sections. Please send us your inquiry if you are interested. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: CE marking, angle stop, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic Shear Brand: DURMA Type: DHGM3020 Sheet Length: 3000 mm Steel Thickness 37: 20 mm Voltage: 3x380V-50 Hz Length: 4450 mm Dedpfxexn Rhrj Ahuekw Width: 3850 mm Height: 2450 mm Weight: 20,000 kg

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop Dkedpfxoxmakgj Ahusw * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots for hydraulic press, eccentric press -Clamping surface: 705 x 484 mm -Inner diameter: 250/220 mm -Plate height: 65 mm Dkjdpfotnlz Hsx Ahuew -Groove width: 22 mm -Dimensions: see drawing in the photos -Dimensions total: 705/484/H65 mm -Weight: 147 kg

Condition: used, functionality: fully functional, total height: 670 mm, total width: 1,330 mm, total length: 1,920 mm, overall weight: 2,000 kg, measuring range Z-axis: 670 mm, working height: 670 mm, table height: 670 mm, Measuring table from a Mitutoyo measuring machine, heavy-duty version, ideal as a measuring plate etc. Weight approx. 2 tons Dkedpfx Asxlaafehuew Dimensions LxWxH: 1920x1330x670 mm, plate thickness 270 mm

Condition: good (used), Year of construction: 2015, functionality: fully functional, working width: 1,350 mm, Used Costa sheet deburring machine, working width 1350MM. 2 rows with brushes, many wear parts included. Dkjdpfx Ahjxrrwvouow

Condition: new, sheet width 2050 mm plate thickness 3 mm strokes per minute until 35 cutting angle 2,0 ° table height over floor 870 mm thickness at "Niro-steel" 2 mm total power requirement 4 kW weight of the machine ca. 1550 kg range L-W-H 2,5 x 1,57 x 1,21 m The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Dodpfx Ajvdfmxshujkw Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: new, Alfa Laval CBH62-12AH-G Capacity: approx. 10 kW Length: 530.00 mm Width: 120.00 mm Height: 90.00 mm Weight: approx. 5 kg Connections Dkjdpfx Ahexp Nzajusw Side A: 1" male BSP (gas) thread Side B: 19 mm weld connection Multiple units in stock All staff speak Dutch, German, and English Prices are exclusive of VAT Shipping possible (surcharge applies) (Subject to technical changes, errors, price modifications, and prior sale)

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 709863, overall weight: 828 kg, Specifications (Hot and Cold Side) PS max: 10bar TS min: 0°C TS max: 110°C V: 39L Dedpfx Ajwrh I Hjhuekw PT: 13bar Fluid group:2 The Funke plate heat exchanger FP405-61-1-N-0 is a high-quality device that efficiently transfers heat between two media. Its innovative design allows effective and reliable heat transfer in various industrial applications. The heat exchanger is characterized by its robust construction and easy handling, ensuring a long service life and low-maintenance operation. It is ideal for use in heating, cooling, or process systems where efficient energy use and precise temperature control are required.

Condition: good (used), Type / Model: 500 x 170 Size: 500 x 130 mm Height: 130 mm Dkodpexvh Avsfx Ahuow Accessories/Equipment: Condition: good Weight: 82 kg Dimensions: 700 x 200 x 130 mm

Condition: good (used), functionality: fully functional, Year of construction: 1995, Working width 3,050 mm Cutting thickness up to 6 mm Stand width 3290 mm Blade length 3090 mm throat 200 mm DNC7000 control unit Dodpfx Ahjxr A E Rsuekw Table height 900 mm Cutting angle 1 - 2° Oil tank volume 210 liters Electrical power 15 kW Speed 1465 rpm Space requirement L/W/H 4,820 x 6,400 x 2,100 mm Weight 9,450 kg

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate Length: 255 mm Width: 130 mm Height: 120 mm Voltage: 110 V DC (direct current) The magnet is tiltable up to 90° and features a sinus support plate. Net weight: 29 kg. Dkjdpoxcimiofx Ahuew

Year of construction: 1980, condition: ready for operation (used), Guillotine shear by Eisen u. Hammerwerk G.m.b.H., capacity: 10mm, working length: 3000mm, year of manufacture: 1980. An inspection can be arranged by appointment. Dkedpext Rk Dsfx Ahuew

Condition: repair required (used), functionality: limited functionality, Thermal binding machine PLANAX COPY BINDER 2 Dkedpfx Asxuifcehusw In need of repair: Error code AC13. It is a mechanical fault. A motor continues running (although it should stop) after the binding process. The heating circuit appears to be functional. Sheet capacity: 5 – 330 sheets Format: Mainly up to DIN A4 (according to binding strip length) Machine dimensions approx. 355 × 588 × 283 mm (D×W×H) Weight: approx. 21 kg Power supply: 230 V, 50 Hz, 400 W Warm-up/binding time Previous model: Warm-up time approx. 6 min; operating temperature approx. 143 °C Materials & Consumables Uses so-called “Copy Strips” – thermal binding strips made of 100% linen texture, available in various widths and colors. Price is generously negotiable. Price proposals are welcome.

Condition: new, Ostas 4-Roll Plate Bending Machine 4R OHS 3100 x 320 Hydraulic side roll adjustment 3 digital displays Hydraulic drop-end Hardened rolls Cone bending device Separate control panel Roll length: 3100 mm Top roll diameter: 320 mm Side roll diameter: 240 mm Total motor power: 20 kW Weight: 13,050 kg Dimensions (mm): 5900 x 1850 x 2050 (L x W x H) Bending capacity: 16 mm at minimum inner diameter (5 x top roll) 12 mm at minimum inner diameter (1.5 x top roll) Pre-bending capacity: 12 mm at minimum inner diameter (5 x top roll) 10 mm at minimum inner diameter (1.5 x top roll) All bending capacities are calculated based on 250 N/mm² yield strength Djdpoxrdxfefx Ahuekw Material: (ST 37 – ST 42 structural steel) The images shown are for illustration purposes only.

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table Dedpfxjwclcie Ahuekw -Clamping plate: with support ribs, on a solid base frame -Clamping surface: 800 x 800 mm -Table height: 930 mm -Plate thickness: 25 mm -Transport dimensions: 800/800/H930 mm -Weight: 235 kg

Condition: excellent (used), Year of construction: 2021, total width: 1,000 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Angles plate ASQUITH - HT-35/10 MACH-ID 9260 Dkjdoxhgg Djpfx Ahuew Make: ASQUITH Type: HT-35/10 Year: 2021 Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:1 Length: 1200mm Width: 1000mm Height: 3500mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: repair required (used), Thermal Binding Machine PLANAX COPY BINDER 2 Needs repair: Error code AC13. It is a mechanical fault. A motor continues to run (although it should stop) after the binding process. The heating circuit appears to be functioning correctly. Sheet capacity: 5 – 330 sheets Format: Mainly up to DIN A4 (according to binding strip length) Machine dimensions approx.: 355 × 588 × 283 mm (D×W×H) Weight: approx. 21 kg Power supply: 230 V, 50 Hz, 400 W Warm-up/binding time: Previous model: Warm-up time approx. 6 min; Operating temperature approx. 143°C Materials & consumables: Uses Copy Strips – thermal binding strips made of 100% linen structure, available in various widths and colors. Manual unfortunately not available. Price negotiable. Offers are welcome. Djdpfx Ahexuicujujkw

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 3100 x 275 Hydraulic Side Roller Adjustment 3 Digital Displays Hydraulic Drop-End Hardened Rolls Cone Bending Device Separate Control Panel Roll Length: 3100 mm Top Roll Diameter: 275 mm Side Roll Diameter: 220 mm Total Motor Power: 16.5 kW Weight: 10,300 kg Dimensions (mm): 5900 x 1750 x 1860 (L x W x H) Bending Performance Data 12 mm at minimum inside diameter (5 x top roll) Dodpfxjxrduyo Ahuskw 10 mm at minimum inside diameter (1.5 x top roll) Pre-bending Performance Data 10 mm at minimum inside diameter (5 x top roll) 8 mm at minimum inside diameter (1.5 x top roll) All bending capacities are calculated on the basis of 250 N/mm² yield strength material (ST 37 – ST 42 structural steel). The images shown are for illustrative purposes only.

Condition: new, Ostas 4-Roll Plate Bending Machine 4R OHS 2570 x 275 Hydraulic Side Roll Positioning 3 Digital Displays Hydraulic Drop-End Hardened Rolls Cone Bending Device Separate Control Console Roll Length: 2570 mm Top Roll Diameter: 275 mm Side Rolls Diameter: 220 mm Total Motor Power: 16.5 kW Dksdoxrdn Hepfx Ahujw Weight: 9500 kg Dimensions (mm): 5350 x 1750 x 1950 (L x W x H) Bending Performance Data 16 mm at minimum inside diameter (5 x top roll) 12 mm at minimum inside diameter (1.5 x top roll) Pre-bending Performance Data 12 mm at minimum inside diameter (5 x top roll) 10 mm at minimum inside diameter (1.5 x top roll) All bending capacities are based on 250 N/mm2 yield strength Material (ST 37 – ST 42 structural steel) The images shown are for illustration purposes only.

Condition: new, Ostas 4-Roller Plate Rolling Machine 4R OHS 2570 x 250 Hydraulic Side Roll Adjustment 3 Digital Readouts Hydraulic Drop-End Hardened Rolls Conical Bending Device Separate Control Panel Roll Length: 2570 mm Top Roll Diameter: 250 mm Side Roll Diameter: 200 mm Total Motor Power: 7.5+1.5 kW Weight: 6300 kg Dimensions (mm): 4550 x 1550 x 1470 (L x W x H) Bending Performance Data 10 mm at minimum inner diameter (5 x top roll) 8 mm at minimum inner diameter (1.5 x top roll) Pre-bending Performance Data 8 mm at minimum inner diameter (5 x top roll) 6 mm at minimum inner diameter (1.5 x top roll) Dkodpfxoxrdcdo Ahuow All bending capacities are calculated based on 250 N/mm² yield strength Material: ST 37 – ST 42 structural steel The images shown are for illustration purposes only.

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 1570 x 150 Dodpfjxrc Dtsx Ahuskw Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end Hardened rollers Device for conical bending Separate control panel Roll length: 1570 mm Top roller diameter: 150 mm Side roller diameter: 130 mm Total motor power: 4+3 kW Weight: 2,470 kg Dimensions (mm): 3350 x 1200 x 1210 (L x W x H) Bending performance data 6 mm at minimum internal diameter (5 x top roller) 4 mm at minimum internal diameter (1.5 x top roller) Pre-bending performance data 4 mm at minimum internal diameter (5 x top roller) 3 mm at minimum internal diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm² yield strength Material (ST 37 - ST 42 structural steel)