Used Tension Clamp Assembly for sale (16,045)

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Kedpsxzug Sofx Aa Ejnf Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Condition: used, functionality: unexamined, Ferwood Code: RU0008921 - Manufacturer Code: 6714A0729 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Knodjv Hgu Aepfx Aa Eef

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Automatic Desiccant Cap Dosing and Assembly Line – REBEL RV5959 (Year 2012) This fully automated line receives unprocessed plastic caps and converts them into functional caps with integrated desiccant for containers requiring controlled humidity. Designed for pharmaceutical, nutraceutical, cosmetic and food industry applications. The system integrates the following operations in a single line: • Cap feeding • Punching and insertion of cardboard barrier discs • Precise dosing of heated silica gel • Thermal and anti-static control • Insertion of inner plastic seal • 100% inspection by machine vision • Dynamic weighing and automatic rejection • Final accumulation on rotary carousel • Dual-lane production • Multi-station servo-driven rotary carousel Knodpfsx Hh R Rex Aa Eof The line is equipped with: • 2 stainless steel feeders + conveyor systems • Dual external support for cardboard reels • Industrial aspiration/extraction unit • Servo-driven rotary table • Complete VARPE V2000 checkweigher with rejection system • Six-position outfeed carousel • 5 Basler cameras + Cognex VisionPro software • Heated silica dosing hopper • Anti-static ionizing unit • 24 high-precision volumetric dosing chambers • Electrical cabinet with PLC, HMI and industrial PC • Integrated dehumidification system

Condition: excellent (used), Catalogue number 6763 TECHNICAL DATA - 5 piston cylinders - 3 upper - 2 side - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition – used press – not repainted – designed for professional use Ksdpfxjim Sffs Aa Esnf Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Year of construction: 2021, condition: new, functionality: fully functional, 320x = 1 pallet € 1,900 Brand: NN Year of manufacture: 2021, new/unused Ksdpfetzwynsx Aa Eenf Dimensions LxWxH (mm): 10,000 length (4,000 kg) Quantity in stock: 320

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) Knjdpfx Aedx R Dmoa Eef • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: new, Commission and transport trolleys, as well as assembly tables for your company. Knedpod Rhx Asfx Aa Eof Our wagons and tables are specially manufactured according to customer-specific requirements. (length, width, height, materials according to customer requirements) We will be happy to make you a suitable offer.

Condition: used, functionality: fully functional, Ferwood Code: RU0011480 - Manufacturer Code: - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC WEEKE VENTURE - WEEKE BHC - HOMAG BOF - HOMAG BAZ - HOMAG CENTATEQ - If interested we offer an overhaul service, contact us. Kedpfxov I A Rpe Aa Eenf

Condition: good (used), Year of construction: 2022, functionality: fully functional, Metal Band Saw MEP - SHARK 281 CCS Year of manufacture: 2023 Max. vice opening: 285 mm Saw blade dimensions: 2950 × 27 × 0.9 mm Saw blade speed: 36 / 72 m/min (2 steps) Motor power: 1.5 / 1.8 kW (three-phase) Coolant tank capacity: 22 liters Working height: 860 mm Machine weight: approx. 370 kg Dimensions (approx.): W: 1785 mm, D: 1000 mm, H: 1650 mm 3D Scanner Solutionix D500 Year of manufacture: 2022 Feature Specification Camera technology: 2 × 2.0 MP cameras Light source: Blue LED Measurement accuracy: Up to 0.01 mm Point-to-point distance: 0.056 mm Scan area (FOV): 92 × 70 × 60 mm Measurement range: Up to approx. 120 mm Volumetric capture area: Up to 385 mm³ Turntable: Integrated, fully automatic Calibration: Fully automatic Texture capture: High-resolution, without additional color cameras Interface: USB 3.0 Type B Knedpfxoxvyiuo Aa Esf Software: ezScan 2017, compatible with Geomagic DesignX & ControlX Typical applications: Jewelry, precision engineering, reverse engineering, cultural heritage, 3D printing Assembly Table MT-400 Year of manufacture: 2015 Feature Specification Load capacity: up to 400 kg Max. plate size: 1200 × 1900 mm Height adjustment: Electric, stepless, 750–1150 mm (partially up to 400 mm stroke) Tilt adjustment: Electric, 0–90° Support frame: With variable extension up to 300 mm Plate fixation: By vertical or quick clamps Mobility: 4 swivel castors with total lock Installation aid: Roller bar for sliding the plate into the control cabinet Material: Powder-coated steel base frame, MiniTec standard profiles

Condition: good (used), Internal item no.: 25065 25 pcs. shrink fit holders HSK-A63 5x D4 Kedpfx Asxdlpvoa Eonf 5x D6 5x D8 5x D12 5x D16 Total length of holders approx. 160 mm

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Knjdpfeb Tmrvox Aa Esf Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, Year of construction: 2026, The composition of the cabinet handling systems to create a manual, semi- or fully-automatic cabinet assembly line is depending on individual production requirements. Knsdpfx Ajdx R D Dsa Eef Cabinet assembly lines that will make work easier, reduce set-up time and increase precision, we will explain to you in a personal conversation.

Condition: good (used), High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, counter module Simatic S7-300 Knedpfx Aeq Untnja Ejf -Type: 6ES7 350-1AH03-0AE0 -Number: 1x module available -Dimensions: 115/40/H125 mm -Weight: 0.3 kg

Condition: new, Year of construction: 2026, Assembly robot BEFARD XGR 800.3 Specification: * full remote control - both operation and drive of the device * three hydraulic extensions with a vertical range of 5.55 m * power supply by a combustion engine (optional additional power supply by a 230 V electric engine or Li-ion batteries) * possibility of simultaneous operation from the 230 V mains and battery charging (for the Li-ion version) * two-circuit vacuum system * maximum lifting capacity 800 kg * 8 vacuum suction cups * rotating frame with suction cups (hydraulically) - controlled by the remote control * lateral shift of the frame with suction cups (right, left 10 cm - hydraulically) * tilting frame with suction cups to the sides (relative to the device - manually or hydraulically) * tilting frame with suction cups (possibility of lifting the element from the horizontal plane and verticalizing it - hydraulically) * non-marking tracks * two working modes - fast and slow * color to choose from Optional additional equipment: * HS spacers * valves * frame tilt with suction cups (hydraulic - remote control) * forks * anti-overload system * hook * LED lamp Kodpoibqr Tefx Aa Eenf * 230V wired power supply (for the combustion version). Other models available: XGR800.1 with one hydraulic extension, with a vertical reach of 3.9m XGR800.2 with two hydraulic extensions, with a vertical reach of 4.75m Gasoline engine - VANGUARD brand 10 HP / 5.5 KW

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Jaw width: 160 mm Jaw height: 50 mm Clamping force: 5 tons Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm - with rotary plate Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Good condition Knsdpfx Aaoxp R E Te Eof

Condition: excellent (used), Compact Clamp Manufacturer: Röhm Designation: Size 4 Clamping jaws: 160 x 75 mm Clamping range: 160 / 300 mm Kedpfexx Rl Sox Aa Eenf Opening stroke: 165 mm Base area: 525 x 205 mm Height: 185 mm Weight: 110 kg

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request Knodeb Evnkopfx Aa Eof

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences Kedpfx Aaedx R Dts Esnf

Condition: excellent (used), PLC control, central module, RAM, CPU, central unit, central device -Manufacturer: Siemens, Simatic S7 Ovp -Type: Simatic S7 6ES7 414-1XF03-0AB0 -CPU: CPU 412-1 Knedpfjhy T Iqex Aa Ejf -Carton dimensions: 310/230/H35 mm -Weight: 1.0 kg

Condition: used, - Dimensions: 381x986x1397 mm - Number of clams: 1 - Smooth surface - Heating plates: 3 zones at the bottom, 2 at the top - Automatic clam lifting - Programmable menus: 32 - Voltage: 380V - Power: 9 kW - Weight: 246 kg - Easy to program and operate - Consistent cooking results - Optimal internal product temperature - Fast and optimized cooking - Easy to clean Knodpfxsxpfvms Aa Eef - Suitable for cooking meat, fish, eggs, chicken and vegetables - Side grease drawers on rails - Program duplication via USB key

Condition: new, messurements (LxWxH): 2480 x 1230 x 65 bis 105width: 1230length: 2480weight approx.: 675 Welding and assembly tables of the SMT flex series are robust, height-adjustable and everyday workstations for processing weighty workpieces, handling electrical tools or chemical or oily substances. The tables can be easily moved using a lifting truck using transport rods in the baseboards and the height can be easily adapted to other working levels. The height adjustment covers a range from 650 mm to 1,050 mm (lower working heights on request). The up to 20 mm thick full steel worktop can also withstand violent impacts or blows, such as those that often occur when working with heavy hand tools or when handling very heavy metal workpieces or tools, without sustained deformations or notches. The metallic worktop allows the unrestricted use of magnetic clamps for fixing components. Due to its high weight, this universal table also ensures good safety against tipping over when heavy objects or tools are placed even in its highest working position. For more information, please follow this link: Knodpfxefk Ah No Aa Eof

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Kedpsru Evgjfx Aa Esnf Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Condition: new, Year of construction: 2025, The Concept Easy is the ideal assembly support for dowel construction at the case goods production as well as at drawer production. Short introduction: • Small footprint requirement, less than 1,8 m2 • Potentiometer for stepless adjustable pressing force • Pressing force min. 300 daN (kg) • Pressing force max. 2200 daN (kg) • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening Ksdpfx Aasdx Daao Eonf

Condition: good (used), Assembly star, assembly table, workbench, welding table, clamping plate, gluing press, gluing star, glue press, gluing stand rotating device, container rotating device, welding rotating device -Cube size: 750 x 750 mm -Working width: 750 x 4000 mm Knodpfx Aob A Smnja Esf -Geared motor: 0.18 kW -pneumatic disc brake -Foot switch -Dimensions: 5250/1100/H2750 mm -Weight: approx. 800 kg

Condition: good (used), Clamping device, clamping tool, clamp bracket, clamp clamp, clamp bracket, pipe clamping system, clamp bracket for roller carriers Ksdpfxsxhc N Uj Aa Eonf -Clamping bracket: Clamping bracket clamp for roller carriers -Clamping range: Ø approx. 90 mm, see photos -Number: 3x terminal available -Price: per piece -Dimensions: 375/60/H240 mm -Weight: 9.2 kg/piece