Used Telco Photocell Amplifier for sale (537)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Gujdpfxsz Iqp Te Ag Toh Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL Guedoz Ir Haspfx Ag Toh All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Guodpfx Ajz Iprtjg Teh Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) Guedpfez Irx Nox Ag Tjh - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: ready for operation (used), Fanuc A06B-6096-H103 Servo Amplifier Module, serial number as shown in the photo, professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Gusdpfx Aoi D Uxpeg Teh

Condition: excellent (used), Fanuc AC servo amplifier (28380) Type A = 6B-6066-H003 Guodslrt U Depfx Ag Tsh No. F 38 00141-B2

Condition: ready for operation (used), Fanuc A06B-6096-H106 Servo Amplifier Module Version: F SN:EA9623614, professionally completely overhauled and tested with 12 months warranty, 100% functional, delivery as per photographs. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Gusdpfxox Erchj Ag Toh

Condition: used, UNHOLTZ-DICKIE Electro-dynamic vibration testing system / Shaker system Model 560 / SALL50F Vibration testing system with power amplifier, controller, and cooling fan For sale is a used electro-dynamic vibration testing system from the manufacturer UNHOLTZ-DICKIE. The system is suitable for vibration and shock testing in industry, research, development, and quality assurance. Technical data: Manufacturer: Unholtz-Dickie Corporation Shaker model: 560 System: TA117SA-560 Design: Electro-dynamic / air-cooled Sine force: 6000 lbf / 26.7 kN peak Random force: 5200 lbf / 23.1 kN RMS Max. acceleration: 100 g Shaker stroke: 25.4 mm Axial resonant frequency: approx. 2200 Hz Effective armature mass: approx. 20.4 kg Power amplifier: Type: SALL50F Power Amplifier Connection: 400 V / 3 phases / 50 Hz Rated current: 60 A Max. output current Sine: 440 A RMS Max. output current Random: 300 A RMS Controller / Software: Brüel & Kjær Shaker Control Software version: 8.1001 Library version: 6.3120 Industrial PC with monitor, keyboard, and mouse USB license key as shown in the pictures Cooling fan: Manufacturer: Industrie CBI Type: RD 65 J EMK three-phase motor: 15 kW 400 V / 50 Hz / 2935 rpm Equipment: Unholtz-Dickie Shaker Model 560 SALL50F Power Amplifier Control and regulation system CBI industrial cooling fan PC system with Shaker Control software 2 mounting plates with hole grid Connecting cables and accessories as shown in the pictures System documentation / folder Applications: Vibration testing Shock testing Resonance studies Automotive and electronics testing Gusdpfx Ajz Nkm Asg Tjh Component and assembly testing Research and development Industrial quality assurance Scope of delivery: 1 × Unholtz-Dickie Shaker Model 560 1 × SALL50F Power Amplifier 1 × CBI industrial cooling fan 1 × PC system with software and license key 2 × Mounting plates Controller, cables, documentation, and accessories as shown in the pictures Weight approx. 1700 - 2500 kg Condition: Used Optical condition as shown in the pictures. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping via freight forwarder possible upon agreement. Subject to change, errors, and prior sale. We will gladly answer any further questions by phone.

Condition: ready for operation (used), Fanuc A06B-6079-H204 servo amplifier module SN:E470023, used, normal signs of use, 100% fully functional, delivery as shown in the photos. Guedpox Eragjfx Ag Toh

Condition: new, Like-new HBM AE501 clip-on electronics measuring amplifier from stock, NOS (New Old Stock). Industrial electronics module for measurement and automation technology. Manufacturer: HBM Model: AE501 Series: Clip-on electronics Device type: Measuring amplifier Condition: NOS New Old Stock / New from stock Application area: Industrial measurement technology Suitable for: Strain gauges and load cells Gjdpfxszfi Ryo Ag Teuh Mounting type: DIN rail Design: Clip-on electronics module Accuracy class: 0.1 Protection class: IP65 Adjustment: DIP switches and potentiometers Signal processing: analog Suitable for measuring: Force, torque, displacement and weight Industrial version: Clip IG Application area: Automation and testing technology Available quantity: 11 pieces.

Condition: ready for operation (used), Fanuc A06B-6058-H227 Servo Amplifier / Servo Amplifier SN: F0500636-B, used, in good condition, 100% functional, delivery as per photos Guedjx Eq S Iopfx Ag Tjh

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; Gusdpfx Asz Irr Aeg Tsh – Roll height: 500 mm; – Roll weight: 20 kg; FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: used, Year of construction: 2011, Automatic labeling machine for glass bottles Manufacturer/Model: Makro MAK-1 4P Ua2 L2 Version with 2 self-adhesive labeling units MAK-A50 Suitable for front label and back label Gusdpfez Icl Tex Ag Tsh Output: up to approx. 3,000–3,500 bottles/hour Container diameter: 40–130 mm, container height: 140–380 mm Label length: 10–195 mm, label height: 10–180 mm Stainless steel version AISI 304, safety enclosure in accordance with CE PLC control with touch-screen display Automatic speed regulation and electric head height adjustment Optical orientation via sensors, plate rotation via stepper motors Installed power: approx. 4 kW Technical data: working direction: left-right, clockwise capacity bph max.: 4500 labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 4 orientation: bottle plate with stepper motor, optical orientation using a photocell bottle diamater max (mm): 130 bottle diamater min (mm): 40 bottle height max (mm): 380 bottle height min (mm): 140 motor height adjustment: yes speed adjusment: frequence converter

Condition: used, RMS Type: Test Manager SWR 900 RMS Electro-dynamic vibration system Test Manager SWR 900 Component carrier SWE 348 Load amplifier SWE 366 Guedpfx Asz Nf Rcjg Tjh Load amplifier SWE 366 Power supply SWE 350 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Fanuc A06B-6079-H106 Servo Amplifier Module – without cover and nameplate, professionally fully overhauled and tested with 12 months warranty, used, minor signs of wear, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Gjdpex Dwm Tjfx Ag Touh

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Gusdpezu Nxiefx Ag Tsh Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency > 90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, functionality: fully functional, TORSION BAR PRESS BRAKE, 2500x40T, used, overhauled and updated to standards, OMAG PI 4020. OPERATES ONLY AT SLOW SPEED, FOR STANDARD-COMPLIANT USE WITHOUT PHOTOCELLS. New electrical system, machine overhauled, and UPPER BLADE AND LOWER PRISM WITH 5 GROOVES, GROUND WITH 2 MANUALLY ADJUSTABLE REAR POSITIONERS. Godszhknlspfx Ag Tsuh

Condition: good (used), Servo drive, control, converter, controller, servo module, axis amplifier, axis amplifier, spindle amplifier module, servo amplifier, drive amplifier Guodpfxexpfdws Ag Toh -Manufacturer: Beckhoff, Digital Compact Servo Amplifier 1-channel -Type: AX5103Technical data: see photos type plate -Dimensions: 250/90/H320 mm -Weight: 5.1 kg

Condition: good (used), Measuring amplifier, power supply module, point-type measuring amplifier, ionizer, static eliminator, static eliminator -Manufacturer: Keyence, Static Eliminator Stabilizer -Type: SJ-M300 -Dimensions: 130/70/H35 mm Gedoyhbr Nepfx Ag Tsuh -Weight: 0.1 kg

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi07, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min Godpjz Iqtfsfx Ag Teuh F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: ready for operation (used), Fanuc A06B-6078-H206 # H500 spindle amplifier module Version: C SN: EA8307634, used, normal signs of use, 100% functional, scope of delivery as shown in photos. Gjdpsx Eq Uijfx Ag Tjuh

Condition: ready for operation (used), Fanuc A06B-6079-H204 Servo Amplifier Module SN:480021, used, normal signs of use, 100% functional, scope of delivery as per photos Gjdpotvctmsfx Ag Touh

Condition: ready for operation (used), Fanuc A06B-6079-H104 Servo Amplifier Module Version: G SN:EA6Y10723, used, in good condition, 100% fully functional, scope of delivery as per photos. Gedox Eq U Aopfx Ag Tjuh

Condition: ready for operation (used), Fanuc A06B-6090-H004 Servo Amplifier SN: V12290584, used, normal signs of wear, 100% fully functional, scope of delivery as shown in the photos. Godpox Erbkofx Ag Tsuh

Condition: used, mileage: 294,267 km, power: 140 kW (190.35 HP), first registration: 06/2015, fuel type: diesel, next inspection (TÜV): 08/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, Special equipment: Godpfx Ajz N Riwog Touh Ambient lighting, App-Connect, Audio navigation system Discover Pro (touchscreen, CD/DVD, MP3, hard drive storage, Bluetooth), Audio system: CD/DVD player, voice control system, multimedia socket AUX-IN and USB interface, Business Package Premium with navigation, front left seat with massage function, 230V socket, electronic differential lock (XDS), driving assistance package Plus, automatic headlight range control, driving assistance system: adaptive chassis control (DCC), driving assistance system: driving profile selection, luggage securing net, rear lights LED, darkened, proactive occupant protection system, driver-side knee airbag, side airbag and seatbelt pretensioners in the rear, driver-side knee airbag, rear side airbag, rear seat belts with seatbelt pretensioners, 8x18 light alloy wheels (Marseille, glossy black), premium mobile phone interface (including Bluetooth/audio interface), electric panoramic sliding/lift sunroof in the front, with panoramic sunroof in the rear, R-Line sports package, rear windows tinted (65%), R-Line package, R-Line bumpers, R-Line interior package Volkswagen Individual / Exclusive, front and rear door sill trims (stainless steel), interior: piano black/glossy black decorative trim, pedals stainless steel/aluminum design, roof lining fabric, black, seat cover/upholstery: part-leather Nappa, seats: sports seats, light alloy wheels, digital radio reception (DAB+), smoker's package, front left seat ErgoActive (including electrically adjustable seat with 14-way adjustment, memory, massage function), mirror package, exterior mirrors electrically foldable, exterior mirrors with puddle light, exterior mirror with automatic anti-dazzle function, left, front left seat with massage function, special paint Oryx White pearlescent effect, sound system DYNAUDIO, 16-channel amplifier, subwoofer, reversible floor mat for luggage compartment, additional winter tires (customer information required) Additional equipment: 3-point rear center safety belt, storage pocket on the front seat backrests, passenger airbag can be deactivated, airbag driver/passenger side, anti-slip regulation (ASR), display for windshield washer fluid level, Highline equipment, equipment package: light + sight, exterior mirror with automatic anti-dazzle function, left, automatic headlight activation (ALS), light assistant (coming home, leaving home), front footwell lighting LED, reading lights front and rear LED, interior mirror with automatic anti-dazzle function, sun visors with mirror (illuminated), sun visor left with mirror (illuminated), sun visor right with mirror (illuminated), exterior mirror aspherical, left, exterior mirror electrically adjustable and heated, exterior mirror painted, outside temperature display, turn signal integrated in exterior mirror, Chrome package 2, chrome surround light switch, chrome surround window switch/mirror adjustment, chrome trim on side windows, roof rails silver, dual-tone horn, through-loading system (rear center armrest), parking assistance system front and rear, front and rear door sill trims (stainless steel), entry lights in the doors front and rear LED, electronic differential lock (EDS), driving assistance system: trailer stabilization program, driving assistance system: multi-collision brake, power windows front and rear, remote unlocking of tailgate, floor mats textile, luggage compartment separation (net partition), luggage compartment cover/roller blind, luggage compartm