Used Tap Thread for sale (6,941)

Condition: used, Micrometer, micrometer screw -Measuring range: 125 - 150 mm -Handover: as is as seen -Accessories: missing, see photo Nledpfx Aasfn Am Re Eok -other sizes: available -Dimensions box: 330/180/H30 mm -weight: 1.1 kg

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0370250754, Item 23374 Hydraulic Welding Rotating and Tilting Table – Three-Axis Welding Manipulator Technical Specifications: - Max. load capacity 3000 kg - Faceplate diameter 1000 mm - Min. table height in horizontal position approx. 1070 mm - Max. table height in horizontal position approx. 1970 mm - Faceplate motor-rotatable + swiveling or tilting Nledpsv Rbivsfx Aa Ejk - Rotation movement electrically continuously adjustable approx. - Right-hand + left-hand rotation - Welding current transmission approx. 700 A - 400 V drive - Connected load 4.0 kW - Hand-held remote control for direction of rotation, swiveling or tilting - Space requirement approx. W 2250 x H 1070 x D 1350 mm - Weight approx. 2000 kg

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Nodpfxsh A S Htj Aa Eelk Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. Nsdew Al U Eepfx Aa Eolk For more information, please contact us.

Condition: used, Year of construction: 1978, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, Nedpfowt T Uhex Aa Ejlk • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition.

Condition: good (used), properties: Manufacturer: Interroll condition: good ( used ) Clamping length: 610mm Roll length: 600mm Roll diameter: 60mm Rollers with internal thread Material: steel Nlodpfx Aasfgvwns Eek Stock: 32 pieces Price per piece Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be pleased to make you an individual offer or advise you on the conception or assembly questions. Just let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of experts. For companies in a wide range of industries, such as: logistics, pharmaceutical industry, trade or the electronics industry we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: used, Micrometer, micrometer screw -Measuring range: 75 - 100 mm -Handover: as is as seen Nledofn Am Tepfx Aa Ejk -Accessories: missing, see photo -other sizes: available -Dimensions box: 265/145/H30 mm -Total weight: 0.7 kg

Condition: new, center distance 2000 3000 4000 5000 6000mm Nlodpfovnmlqjx Aa Ejk

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Nlodpfsuz If Nex Aa Ejk Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC Thread, Gear, and Profile Rolling Machine Model ROLLEX 1 Substructure: The substructure of the thread and profile rolling machine consists of welded steel profiles, partially covered with sheet metal. The space for the process lubricant reservoir is located in the front area of the substructure. Main drive: The main drive generates the rotary motion of the rolling tools required for gear rolling. The drive motor is flanged to the base plate of the rolling spindle bearing via the Cyclo Drive gearbox. The rotary motion is transmitted to the rolling spindle via the Schmidt coupling. The machine operates in a speed range of 0 to 30 rpm, with this range further subdivided into 0 to 20 rpm for continuous operation (S1) and 20 to 30 rpm for intermittent operation (S4). The speed is continuously adjustable using a frequency converter. Brand PROFIROLL Type ROLLEX 1 Year of manufacture 2003 Control, Brand, Type Siemens, Sinumerik, 840D Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: Max. rollable workpiece diameter: 40 mm Rolling carriage stroke: 2 x 80 mm Min. / max. center distance of rolling spindles: 160 / 320 mm Rolling spindle height above the machine bed: 160 mm Max. tool diameter: 250 mm Rolling spindle mounting diameter: 120 mm Nedjv Uxq Sopfx Aa Ejlk Rolling spindle mounting length: 80 mm Power & Drive Max. rolling force: 100 kN Rolling spindle speed, continuously variable 0-30 rpm Motors Rolling spindle drive: 2 x 13 Nm Hydraulics 50 Hz: 5.5 kW Process lubrication 50 Hz: 0.1 kW Central lubrication 50 Hz: 0.06 kW Temperature range: +5–+40 °C Current type/frequency: 3 N/50 Hz Nominal voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24 V/230 V Connected load: 18 kW Nominal current of the machine: 39 A

Condition: used, Year of construction: 1968, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder, size: Z52/2B, + 21B Nsdpfx Aaev N N Scs Eslk • 5 sets of chaser jaws, pitch 1 - 2,5 mm Machine is in a good condition.

Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/2 ", 3/4", 1 ", 1 1/4", 1 1/2 " Nedpfedm T S Ajx Aa Ejlk -Dimensions: 510/360 / H240 mm -Weight: 64 kg

Condition: used, Ball valve internal thread -Internal thread: 2 -Full: passage, full ball Nedpfx Aob A Sa Sja Ejlk -Number: 10x available -Price: per piece -Weight: 0.2 kg

Condition: used, Ball valve internal thread -Internal thread: 2 -Full: passage, full ball -Number: 3x available -Price: per piece -Weight: 1 kg Njdpfjb A Sa Tex Aa Eslk

Condition: used, End mills, milling cutters, shank thread mills, thread cutters -Manufacturer: JAL PWS P, 29 pieces shank thread milling cutter -Recording: Ø 27 mm 25 pieces, O 32 mm 4 pieces -Various types: see photos -Sizes: see photo parts list -Price: complete -Dimensions: 240/180/H150 mm -Total weight: 4.2 kg Nlsdpsgfcm Rofx Aa Eok

Condition: used, Tapping machine, pipe thread cutter Njdpfx Ajfyh Ebja Eolk -without tools -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm -Weight: 64 kg

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Inch thread: 1/4 - 1 inch -Dimensions: 550/120/100 mm -Weight: 4.7 kg Nedpfx Aaod Scp Uo Ejlk

Condition: used, Ball valve internal thread -Internal thread: 2 -Full: passage, full ball -Number: 7x available Nedpjb A Sbasfx Aa Eslk -Price: per piece -Weight: 1 kg

Condition: used, Ball valve internal thread -Internal thread: 2 -Full: passage, full ball -Number: 5x available -Price: per piece -Weight: 3 kg Nedpfxsb A Sa Rj Aa Eelk

Condition: used, Ball valve internal thread -Internal thread: 2 Nlsdpfx Aasb A Sa Ue Eok -Full: passage, full ball -Number: 24x available -Price: per piece -Weight: 1 kg

Condition: used, PLC control, Siemens Simatic Net CP Profibus, communication processor -Manufacturer: Siemens, Profibus SpliTConnect Tap Ovp -Type: Nodpfx Aajhzvwfs Ejlk -Number: 9x Connect Tap available -Price per piece -Dimensions cardboard: 160/110/H55 mm -Weight: 0.2 kg/pc.

Condition: used, Micrometer, micrometer screw -Measuring range: 75 - 100 mm -Accessories: see photo Njdpfx Asfn Am Uoa Eslk -other sizes: available -Dimensions box: 265/125/H25 mm -Total weight: 0.8 kg

Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/4 "- 2" Nlodpfx Aaodm T Tbs Ejk -Dimensions: 510/360/H240 mm -Weight: 64 kg

Condition: used, Thread cutting dies, replacement dies, thread cutting heads with chasers, thread cutting stock, thread cutting machine, pipe thread cutter -various: thread cutting sizes -Price: complete -Weight: 12 kg Nledpfx Aaed Aay Do Eek

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter Nlodpfxec T Nx Nj Aa Ejk -Inch threaded jaws: 1/2 "- 1 1/2" inches -Weight: 9.5 kg