Used Tank for sale (14,629)

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate Kodpfx Agjyckt Eo Usll EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 6,350 l, GENERAL Equipment: Crane lugs Design: Rectangular Remarks: Thermoplate for heating/cooling on one of the two sidewalls (not present on the other sidewall); 1 manhole approx. 340 x 440 mm in the front base; minor dents on the top plate; various fittings inside the tank Total width: 910 mm Total height: 2,950 mm Total length: 3,650 mm Kedpeycktxsfx Ag Uell Heating/Cooling: Available Location: Bremen Nameplate: Volume: 6,350 litres Product-contact material: V2A 1.4301 (AISI304) Condition: Used Last application: Winery TANK Foot design: Height-adjustable feet Number of feet: 5 pcs EQUIPMENT Outlet: DN50 DIN 11851 Note: Light residues MATERIAL QUALITY Material tempering system: V2A 1.4301 (AISI304) Foot material: Stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Kledjycktrjpfx Ag Uel Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: used, tank capacity: 8,870 l, GENERAL INFORMATION Design: horizontal Remarks: 1 oval manway (340 x 440) in the front bottom Internal diameter: 1,985 mm Overall width: 2,020 mm Overall height: 2,110 mm Overall length: 3,300 mm Location: Bremen Volume: 8,870 litres Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical length: 2,240 mm Last application: winery TANK Support type: height-adjustable feet Kljdpfx Agsycktlo Uol Number of feet: 4 pieces EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL CHARACTERISTICS Feet material: stainless steel

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: vertical Year of manufacture: 2006 Notes: Only nameplate is available; further technical documentation available; cylinder manhole diameter 600 mm; a DN 50 reducer is flanged to the outlet; an additional identical tank can be provided on request Internal diameter: 2,500 mm Total height: 3,600 mm Location: Bremen Technical documentation: Drawing, TÜV papers Volume: 10,000 liters Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,500 mm Previous application: slurry Kledpfxjycktfo Ag Uol TANK Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.4 (to/m³) Support design: height-adjustable legs Number of legs: 3 pcs. EQUIPMENT Manhole / Dome: in cylinder, in top head (Ø 430) Outlet: Flange DN80 MATERIAL SPECIFICATION Leg material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm

Condition: used, tank capacity: 1,200 l, GENERAL Features: Outlet tap Design: upright Remarks: Tank 1: minor dents on the bottom, manhole diameter approx. 430 mm (manhole cover loosely placed), overall height lower (approx. 1,450 mm); Tank 2: manhole diameter approx. 500 mm; tank with more significant dents; see photos Kljdpfjyckrujx Ag Uel Internal diameter: 1,200 mm Total height: 1,600 mm Location: Bremen Nameplate: Volume: 1,200 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 900 mm Previous use: cosmetics TANK Support type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: on top head Outlet: DN25 DIN 11851 MATERIAL SPECIFICATION Foot material: stainless steel

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: spray head Design: upright Remarks: Minor differences in execution between the two tanks (e.g., outlet positions); manway diameter approx. 510 mm; a former manway and 1 connection in the lower cylinder area were welded shut by the previous operator; 1 tank has a small dent in the insulation jacket; see photos Speed: 900 rpm Outer diameter: 1,800 mm Inner diameter: 1,690 mm Total height: 4,550 mm Insulation: present Power: 0.55 kW Agitator: propeller Location: Bremen Volume: 8,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,500 mm Last use: dairy TANK Support type: feet Number of feet: 4 INSULATION Insulating jacket: hermetically welded Insulating jacket material: stainless steel Klsdoyckrhepfx Ag Uol EQUIPMENT Manway / dome: in top head Outlet: DN65 DIN 11851 MATERIAL SPECIFICATION Leg material: stainless steel AGITATOR Agitator manufacturer: Stelzer Voltage: 220/380 volt Agitator position: side-mounted on cylinder Agitator details: On one agitator, the propeller is missing and the motor terminal box is damaged (see photos)

Condition: used, tank capacity: 500 l, GENERAL Equipment: Disc valve Design: Vertical Remarks: Container slightly out of round; parts of the disc valve are lower than the bottom surface (take this into account when positioning the container); outlet slightly bent upwards; tank has dents at the cylinder/bottom transition (see photos) Internal diameter: 800 mm Total height: 1,070 mm Top cover: open Location: Bremen Nameplate: Volume: 500 liters Kedpfxeyckrbo Ag Uell Cylinder wall thickness: 2.0 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,000 mm Previous use: paint industry CONTAINER Bottom: Flat bottom EQUIPMENT Outlet: 48 mm Note: slight residues TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2.5 mm

Condition: used, tank capacity: 11,800 l, GENERAL INFORMATION Design: vertical Notes: For one tank, the cylinder is marbled on the outside Inner diameter: 2,080 mm Total height: 4,450 mm Location: Bremen Volume: 11,800 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,000 mm Previous application: winery TANK Mounting type: height-adjustable feet Number of feet: 3 EQUIPMENT Ksdpfx Aeyckqqeg Usll Manhole / dome: in cylinder (approx. 350 x 450 mm) Outlet: flange DN100 MATERIAL SPECIFICATION Foot material: stainless steel

Condition: used, tank capacity: 10,000 l, GENERAL Design: upright Notes: Manhole approx. 320 x 420 mm; tanks are partially marbled on the outside; the foot lengths of the individual tanks differ slightly (usually one foot is shorter than the other two; the feet should be modified or shimmed as needed before re-installation); one tank has a larger dent in the upper cylindrical area (see photos) Internal diameter: 1,880 mm Total height: 4,250 mm Location: Bremen Volume: 10,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,250 mm Last previous use: Winery TANK Support type: Feet Number of feet: 3 pcs EQUIPMENT Manhole / access: on the cylinder Outlet: 90 mm Note: minor residues/adhesions MATERIAL SPECIFICATION Kledpsyckqkofx Ag Ujl Foot material: Stainless steel

Condition: used, tank capacity: 5,000 l, GENERAL Design: upright Notes: Manhole approx. 320 x 420 mm; tanks are partially marbled on the outside; the foot lengths on the individual tanks differ slightly (usually one foot is shorter than the other two; the feet should be modified or shimmed accordingly before reinstallation); one tank has a small dent in the upper cylindrical area (see photos) Internal diameter: 1,370 mm Total height: 3,950 mm Location: Bremen Volume: 5,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,000 mm Previous application: winery TANK Support type: feet Number of feet: 3 pcs EQUIPMENT Manhole / access hatch: in the cylinder Outlet: 90 mm Note: slight residues Kodpfxoyckqdj Ag Ujll MATERIAL SPECIFICATIONS Foot material: stainless steel

Condition: used, tank capacity: 50,000 l, GENERAL Design: upright Remarks: exact dimensions may vary slightly; the riveted insulation is damaged in some areas (see images); the base of the tank is filled with concrete External diameter: 3,100 mm Total height: 9,000 mm Insulation: present Location: outdoor storage Volume: 50,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: vapor condensate tank (dairy) INSULATION Kledpfxsyckptj Ag Uol Insulation jacket: riveted EQUIPMENT Manhole / dome: in the cylinder Note: slight residues

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Level indicator (no guarantee) Design: Rectangular Notes: Interior base dimensions: approx. 1,100 x 1,100 mm; internal wall height: approx. 2,150 mm; light protective coating on the outside (no longer completely intact); manhole diameter approx. 490 mm; slight differences in versions, e.g., manholes and outlets; remainder drain diameter mostly 25 mm (occasionally 50 mm); 2 tanks without level indicator Total width: 1,230 mm Total height: 3,250 mm Total length: 1,500 mm Location: Bremen Nameplate: Volume: 2,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used Last use: Cosmetics TANK Bottom: flat bottom with slope Support type: Feet Number of feet: 4 pcs Kedpjyckpmofx Ag Uoll EQUIPMENT Manhole / Dome: On top Outlet: Present Remark: Slight residues MATERIAL SPECIFICATION Foot material: Steel

Condition: used, tank capacity: 70,800 l, GENERAL Design: horizontal Remarks: Manhole approximately 350 x 450 mm on the front bottom; one tank (9540-1) with a small dent under the bearing shell, one tank (9540-2) without a nameplate; up to 4 additional identical tanks can be made available upon request. The following saddle supports can be purchased separately for the tank: Total width: 3,000 mm Total height: 3,000 mm Total length: 10,500 mm Location: external storage Nameplate: Volume: 70,800 liters Product-contact material: V2A 1.4301 (AISI304) Kedpfx Agjyckn Ns Ujll Condition: used Last previous use: water TANK Ends: Torispherical heads Base type: Saddles EQUIPMENT Outlet: available

Condition: used, tank capacity: 500 l, GENERAL Design: upright Notes: Slight differences in the design of the containers; Containers slightly out-of-round and with minor dents; Containers have no bottom outlet; Some feet are slightly bent; One of the lids has a round sheet metal cutout (see photos) Inner diameter: 840 mm Total height: 1,250 mm Top cover: open with loose lid Location: Bremen Volume: 500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 910 mm Previous use: cosmetics (cream) CONTAINER Bottom: flat bottom Support type: feet Number of feet: 4 pcs EQUIPMENT Outlet: not available Kedpfx Agsycknvs Ujll MATERIAL SPECIFICATION Feet material: stainless steel

Condition: used, tank capacity: 2,000 l, GENERAL Equipment: ball valve Design: upright Notes: Manhole diameter approx. 410 mm; side walls in 'trapezoidal sheet metal design' (external basic dimension approx. 1200 x 900 mm); internal height approx. 2,000 mm Overall width: 920 mm Overall height: 2,700 mm Overall length: 1,350 mm Location: Bremen Volume: 2,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: N-heptane Ksdpfxjyckmro Ag Uoll TANK Bottom: flat bottom Support type: height-adjustable feet Number of feet: 4 EQUIPMENT Manhole / access port: on the top head Outlet: 15 mm MATERIAL SPECIFICATION Feet material: stainless steel

Condition: used, tank capacity: 13,000 l, GENERAL Equipment: butterfly valve, spray head Design: horizontal Notes: 1 manhole approx. 300 x 395 mm in the front bottom; 3 loose bearing shells, Fe; 1 dent at the junction cylinder/front bottom (see photos) Internal diameter: 2,190 mm Total height: 2,550 mm Total length: 4,100 mm Location: Bremen Volume: 13,000 litres Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical length: 3,000 mm Last application: brewery VESSEL Support type: saddles Number of legs: 3 pcs FEATURES Kjdpfx Aoyckl Isg Ujll Outlet: DN65 DIN 11851

Condition: used, tank capacity: 9,000 l, GENERAL Design: upright Remarks: 1 manhole approx. 320 x 420 mm in the cylinder; tank was professionally cleaned and overhauled by the manufacturer in 2024; factory-new residue drain valve (reduced outlet to DN 50 DIN 11851 with butterfly valve), sampling valve, and manhole gasket installed Kodpfoyckluox Ag Ujll Internal diameter: 2,000 mm Total height: 3,700 mm Location: Bremen Technical documentation: drawing Volume: 9,000 liters Wall thickness (cylinder): 2 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,440 mm Previous use: wine storage TANK Base type: height-adjustable feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: in cylinder Outlet: DN100 DIN 11851 MATERIAL SPECIFICATION Surface outside: marbled Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Wall thickness (bottom): 3 mm Wall thickness (top): 2.5 mm

Condition: used, tank capacity: 16,500 l, GENERAL Construction type: vertical Notes: 1 manhole approx. 320 x 420 mm in the cylinder; lower bottom with slope towards the outlet with cup (an appropriate foundation must be constructed on site for installation); total height according to drawing; top head and uppermost cylinder segment made of 1.4571 (V4A); the tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand new residue discharge valves, sampling valves, and manhole gaskets have been installed. Internal diameter: 2,610 mm Total height: 3,650 mm Location: outdoor storage Technical documentation: drawing Volume: 16,500 liters Cylinder wall thickness: 2.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,970 mm Previous use: wine storage TANK Klsdpfx Agjycklno Usl Lower bottom: flat bottom with slope EQUIPMENT Manhole / dome: in the cylinder Outlet: 100 mm MATERIAL SPECIFICATION External surface: marbled Top head material: AISI316 (V4A) 1.4571 TECHNICAL DATA / DIMENSIONS Lower bottom thickness: 3.5 mm Top head thickness: 3 mm

Condition: used, tank capacity: 48,000 l, GENERAL Design: horizontal Remarks: 1 manhole approx. 320 x 420 mm in the front head; cylinder wall thickness: 3-4 mm; total length and total height as per drawing; the tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand-new outlet valves, sampling valves, and manhole gaskets installed. Internal diameter: 3,080 mm Total height: 3,600 mm Total length: 7,000 mm Location: External storage Technical documentation: Drawing Volume: 48,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical length: 5,700 mm Previous use: Wine storage TANK Support type: Height-adjustable feet Number of feet: 6 pcs EQUIPMENT Outlet: 100 mm Kljdpfx Agoycklhs Ujl MATERIAL SPECIFICATION Outer surface: Marbled Foot material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm

Condition: used, tank capacity: 10,000 l, GENERAL Design: Vertical Remarks: 1 manhole approx. 320 x 420 mm in the shell, 1 handhole with 250 mm diameter in the top head; tank mounted on a base plate sloped towards the outlet (requires a corresponding foundation to be prepared on site for installation); total height as per drawing; top head and uppermost shell segment made of 1.4571 (AISI 316 Ti); the vessel was professionally cleaned and completely overhauled by the manufacturer in 2024; brand new residual drain valves (reduces outlet to DN 50 DIN 11851 with butterfly valve), sampling valves and manhole seals were installed. Speed: 950 rpm Internal diameter: 2,200 mm Total height: 3,450 mm Power: 5.5 kW Agitator: Propeller Location: Bremen Technical documentation: Drawing Kledjycklbjpfx Ag Ujl Volume: 10,000 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: Used Last application: Liquid sugar VESSEL Bottom: Conical bottom Support design: Skirt EQUIPMENT Manhole / Dome: In shell, handhole Outlet: 100 mm MATERIAL SPECIFICATION Top head material: AISI 316 (V4A) 1.4571 AGITATOR Agitator manufacturer: Stelzer Voltage: 380/660 V Agitator arrangement: Mounted laterally on the shell TECHNICAL DATA / DIMENSIONS Top head wall thickness: 3 mm

Condition: used, tank capacity: 8,800 l, GENERAL Equipment: Level indicator (without guarantee), butterfly valve Design: rectangular Notes: One manhole approx. 325 x 420 mm in the front wall; tanks were professionally cleaned and overhauled by the manufacturer in 2024; factory-new residual drain valves (bolted to reduce outlet to DN 50 DIN 11851 with butterfly valve) and manhole gaskets installed; walls outwardly dished; minor dents possible in the front wall; overall height including end of the plastic tube level indicator approx. 3,850 mm Overall width: 1,580 mm Overall height: 3,700 mm Overall length: 2,600 mm Location: Bremen Volume: 8,800 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last purpose of use: wine storage TANK Support design: height-adjustable feet Number of feet: 4 pcs EQUIPMENT Outlet: DN65 DIN 11851 Kledpjyckk Dofx Ag Uol MATERIAL SPECIFICATION Foot material: stainless steel

Condition: used, tank capacity: 5,200 l, GENERAL INFORMATION Equipment: Lifting lugs Construction type: Rectangular Remarks: 1 manhole approx. 340 x 440 mm in the front bottom; tanks were professionally cleaned by a specialist company in 2024; walls curved outward; tanks with dents (see photos) Overall width: 1,400 mm Overall height: 2,650 mm Overall length: 2,080 mm Location: Bremen Volume: 5,200 liters Product contact material: V2A 1.4301 (AISI 304) Condition: used Last application: wine storage Kedpjyckkwofx Ag Uell VESSEL Base design: Feet EQUIPMENT Outlet: DN65 DIN 11851 MATERIAL CHARACTERISTICS External surface: marbled Feet material: stainless steel

Condition: used, tank capacity: 7,500 l, GENERAL Design: horizontal Outer diameter: 1,400 mm Overall height: 2,120 mm Overall length: 5,500 mm Location: outdoor storage Nameplate: Volume: 7,500 liters Cylinder wall thickness: 4 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used TANK Max. permitted operating temperature: 50 °C Ends: Klöpper head Support type: welded saddles Number of supports: 2 pieces EQUIPMENT Manhole / dome: in the cylinder Outlet: 50 mm TECHNICAL DATA / DIMENSIONS Kjdpjyckkqofx Ag Uoll Ground clearance: 300 mm Bottom head thickness: 4 mm Top head thickness: 4 mm

Condition: used, tank capacity: 2,000 l, GENERAL Equipment: Disc valve Design: Oval Remarks: 1 manhole approx. 320 x 420 mm in the front head; tanks were professionally cleaned and overhauled in 2024; brand-new residual drain valves (bolted on to enlarge the outlet to DN 50 DIN 11851 (with disc valve)) and manhole seals have been installed; some tank feet are slightly bent; 1 tank with multiple dents Overall width: 730 mm Overall height: 1,850 mm Overall length: 2,300 mm Location: Bremen Kodpfx Agjycki Ts Uoll Capacity: 2,000 liters Product contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical length: 2,000 mm Previous application: Wine storage TANK Mounting type: Feet Number of feet: 4 pieces EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL QUALITY Feet material: Stainless steel