Used Stud Welding Equipment for sale (42,161)

Condition: excellent (used), load capacity: 3,000 kg, table load: 3,000 kg, Equipment: foot remote control, Belgium Welding 3 To 3,000 kg load capacity welding positioner, complete set Hjdpfxsxbhrhs Aacjfn Horizontal load capacity 3,000 kg, tilted load capacity 3,000 kg Stepless tilt and speed adjustment Very robust construction Speed steplessly adjustable from 0.05 to 0.7 rpm, digital display Turntable diameter: 1,400 mm Height horizontal: 1,450 mm, tilted to center: 1,200 mm Length: 2.0 m x Width: 2.0 m Hand-held remote control with digital display and foot remote control

Condition: like new (used), Cove Equipment Shredder Model: SH-5 Stainless shredder, continuous process, ideal for chicken and pulled pork, 750Kgs per hour, 1Ph Hodpfx Ajf N Nd Seacefn

Year of construction: 2008, condition: ready for operation (used), Highly efficient production line for the production of molded stick ice cream, popsicles and similar products. Capacity of up to 42,000 pieces per hour (can also be used at a reduced hourly capacity). The currently installed mold size is 35ml moldet stick ice cream. Manufacturing date of the line is 2008. Complete line is for sale, including rotary molding system, automatic stick inserter, wrapper, control panels and other components. Full documentation is available. The line was in use until September 2023 and was then professionally dismantled for rapid recommissioning. Approximate space required for installation: 9 x 4.5 m. Hjdepyha Ejpfx Aacofn

Year of construction: 2021, operating hours: 150 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 8389-5709, Cardboard and textile plotter, 2 tool holders, e.g. for creasing and cutting, working area 3x1.5 m, textile cutting device with roll processing, vacuum table. Hodpfxsxlm Enj Aacsfn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 567 h, load capacity: 2,500 kg, lifting height: 3,000 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, battery capacity: 410 Ah, battery voltage: 80 V, empty load weight: 4,100 kg, total height: 2,160 mm, total length: 2,503 mm, total width: 1,150 mm, Equipment: sideshift, Manoeuvrable and exceptionally high-traction electric forklift equipped with a lithium-ion battery. The forklift is suitable for both indoor and outdoor operation. Lithium-ion batteries ensure easy and cost-effective operation. The forklift features user-friendly controls and extremely simple and inexpensive maintenance. 80V, 410Ah lithium iron phosphate (LFP) battery with integrated Battery Management System (BMS). 80V, 200Ah high-power charger (three-phase) ZAPI (ITALY) electronic controller Battery operating time: 8 hours; charging time: up to 2 hours CASCADE side-shift forks Large wheels for excellent ground clearance Small turning radius IPX4 water resistance rating Pneumatic seat LED lights Specification: Forklift type: Electric forklift Product code: 11013 Model: EFL252 Year: 2022 Lifting capacity, kg: 2500 Mast type: Duplex Lifting height, mm: 3000 Hfedoxnrycjpfx Aacon Operating hours: 567 Country of origin: China Weight (kg): 4100 Dimensions (L x W x H, mm): 2503 x 1150 x 2160 Overall height, mm: 2160 Forklift attachments: Side-shift, front windscreen, wipers, battery charger Note: The forklift has been inspected and is technically sound. A full technical service will be carried out prior to delivery.

Condition: excellent (used), - Cooking chamber dimensions: 1200x2000 mm Hfedpfxowxmn Sj Aacen - Refurbished equipment: The equipment is prepared upon order, collection and return deadlines are agreed at that time (please ask for the price after refurbishment).

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, warranty duration: 6 months, The equipment has been checked by an authorized service center and is ready for operation. We provide a 6-month warranty. The CEA CONVEX 405 Pulse Premium is a high-quality MIG/MAG welding power source equipped with advanced pulse and double-pulse technology. Designed for professional and industrial applications, this Italian-made welder ensures excellent weld quality, easy setup with synergic programs, and maximum versatility. The unit is used but fully tested and in good working condition, ready for immediate operation. ⚙️ Technical Specifications Model: CONVEX 405 Pulse Premium Welding current range: 20 – 400 A Duty cycle (40 °C): 400 A {eta} 60% / 320 A {eta} 100% Power supply: 3~ 400 V, 50/60 Hz Welding processes: MIG/MAG, Pulse, Double Pulse, MMA, TIG Lift Control panel: synergic with memory programs and digital display Wire diameters: 0.8 – 1.6 mm (steel, stainless steel, aluminium) Cooling system: air or optional water cooling (depending on configuration) Weight: approx. 120–140 kg ✅ Key Features Pulse & Double Pulse modes – ideal for aluminium and stainless steel. Synergic programs – quick and precise parameter adjustment. Supports multiple processes: MIG/MAG, MMA, TIG Lift. Hjdpfxoxl Drlj Aacefn Stable arc and excellent weld appearance even on thin materials. CEA – Italian technology renowned for quality and reliability. Used but checked and ready for work.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: KB-20211022002, 1 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tank, previously used as a brite tank but can be used as an FV. Hfjdewl H Nispfx Aacsn Technical Specification: Model - KBBFT1300A. Serial number - KB-20211022002 Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Year of construction: 2008, condition: ready for operation (used), The GIF-2000 continuous ice cream freezer (built in 2008) from Gram Equipment is a high-performance freezer that can operate with a capacity of up to 2000l/h. The freezer is mainly used for ice cream or sorbet ice cream, but can also be used for cooling or freezing other liquid products such as yogurt, sauce, etc. The system was in use until September 2023 and was then professionally dismantled for rapid recommissioning. Detailed documentation is available and is included in the offer. Hfedspyhdtepfx Aacjn

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: RoboRail, type of input current: three-phase, working range: 12,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, overall weight: 6,500 kg, input voltage: 400 V, total width: 3,200 mm, total height: 2,600 mm, total length: 20,000 mm, workpiece weight (max.): 550 kg, table length: 12,500 mm, cutting current: 125 A, working length: 12,500 mm, height adjustment type: mechanical, input frequency: 50 Hz, ambient temperature (max.): 45 °C, RoboRail: All-in-one Robot Plasma Cutting Machine We regularly hear from manufacturers that automation is not for them because everything they do is different, but that is precisely what makes automation so important! With the RoboRail, each individual part can be different and the plasma cutting machine will cut and deliver the parts 1-for-1, directly from the CAD files. Does your project require complex cuts? Send it to the RoboRail. Does your project require a wide variety of delivered profiles? Send it to the RoboRail! This machine will become the workhorse of your factory, giving you time to focus on what your company does best! Easy design input: Import files from SDS2, Tekla, or a Solid model. Or simply draw your design on the machine work surface. Optimal material usage: No more waste with HGG-optimized nesting. The more files you upload, the smarter the nesting process becomes. Seamless processing: Upload your file and RoboRail takes over. Automatic loading of material and accurate determination of starting point. No need for operator intervention during the cutting process. Perfect results, every time: Hfodpfx Asq Nz Skoacon Get flawless cut steel, exactly matching your CAD design. Experience uninterrupted production with seamless repetition. RoboRail ensures readiness for the next production step. This machine is available in several configurations, including variants with different maximum material feed lengths. Based on your selected configuration, we can provide you with an appropriate price proposal. Please refer to our brochure for a complete listing of available options. If you have further questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2025, functionality: fully functional, If you are looking for a cone crusher for sale, you can call us 24/7. CONSTMACH's innovative cone crushers are the perfect solution for those looking for superior performance and durability. Our wide range of models offers options to suit every need. While our HP100 model draws attention with its compact and powerful structure, our HP800 model provides superior efficiency even in the most challenging conditions. Each of our cone crusher models is manufactured to the highest quality standards. The total weight of the HP100 model is 5,400 kg, and the weight of the boiler, boiler liner, cover and bunker is 1,320 kg. This model, whose recommended maximum power varies between 90 Kw and 125 HP, offers impressive performance with a countersunk shaft speed of 750-1200 rpm. HP200 and HP300 models are designed to meet increasing power needs and have a recommended maximum power of 132 Kw and 200 KW, respectively. For heavy-duty applications, our HP400 and HP500 models stand out with maximum power capacities of 315 Kw and 355 Kw. The total weight of the HP400 is 23,000 kg and the HP500 is 33,150 kg. Our largest model, HP800, makes a difference in the industry with its total weight of 68,650 kg and maximum power capacity of 600 Kw. CONSTMACH cone crushers promise high efficiency, low maintenance costs and long life. Head mantle and feed plate weights are carefully balanced for optimum performance on each model. All models from HP200 to HP800 offer countersink rotation speeds ranging from 700-1200 rpm to suit a variety of operating conditions. By choosing CONSTMACH cone crushers with these superior features, you can increase your production efficiency and profitability. Manufactured using high quality materials and advanced manufacturing techniques, these breakers offer reliable performance for many years. An ideal choice for those looking for both performance and durability, CONSTMACH cone crushers add value to your investment. HP100 Cone Crusher Technical Specifications Total Weight: 5,400 kg / 11,900 Lbs Weight of Boiler, Boiler Liner, Lid and Bunker: 1.320 kg / 2.910 Lbs Head Mantle and Feed Plate: 600 kg / 1.325 Lbs Recommended Maximum Power: 90 Kw / 125 HP Countersink Spindle Speed: 750 - 1200 rpm Hjdpfx Aaeud Tauscjfn HP200 Cone Crusher Technical Specifications Total Weight: 10,400 kg / 22,960 Lbs Weight of Boiler, Boiler Liner, Lid and Bunker: 2.680 kg / 5.915 Lbs Head Mantle and Feed Plate: 1.200 kg / 2.650 Lbs Recommended Maximum Power: 132 Kw / 200 HP Csnqybspqg Countersink Spindle Speed: 750 - 1200 rpm HP300 Cone Crusher Technical Specifications Total Weight: 15,810 kg / 33,490 Lbs Weight of Boiler, Boiler Liner, Lid and Bunker: 3.525 kg / 7.765 Lbs Head Mantle and Feed Plate: 2.060 kg / 4.550 Lbs Recommended Maximum Power: 200 Kw / 300 HP Countersink Spindle Speed: 700 - 1200 rpm HP400 Cone Crusher Technical Specifications Total Weight: 23,000 kg / 50,600 Lbs Weight of Boiler, Boiler Liner, Cover and Bunker: 4.800 kg / 10.575 Lbs Head Mantle and Feed Plate: 3.240 kg / 7.130 Lbs Recommended Maximum Power: 315 Kw / 400 HP Countersink Spindle Speed: 700 - 1000 rpm HP500 Cone Crusher Technical Specifications Total Weight: 33,150 kg / 73,000 Lbs Weight of Boiler, Boiler Liner, Cover and Bunker: 7.200 kg / 15.800 Lbs Head Mantle and Feed Plate: 5.120 kg / 11.280 Lbs Recommended Maximum Power: 355 Kw / 500 HP Countersink Spindle Speed: 700 - 950 rpm

Condition: new, Year of construction: 2025, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Hfedpfon Sl D Rjx Aacsn

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Cheese vat / Pasteurizer / Process tank 100 liters. Used - 3.5 years old The Vat: - Completely stainless steel - Double jacket (bain-marie) + insulation - Must be operated without pressure - 100 liters - Butterfly valve, NW 50 - Agitator mounted on the lid and easily removed using a quick-change adapter. - Agitator rotates slowly; approximately 24 RPM - 400 volt / 8.4 kW heating (16 amp plug). Heating power can be halved with a switch (8.4 - 4.2 kW). Hsdpfxewg Ells Aacofn Control: - Digital milk temperature display - PID controller / thermostat - Control system with one automatic program (heating - holding - cooling) and manual operation (manual heating and manual cooling with cold water) - Heats up to 90°C - Cooling with cold water. Water inlet with motor-controlled ball valve.

Condition: new, Year of construction: 2024, operating hours: 2 h, workpiece weight (max.): 1,000 kg, pipe diameter (max.): 800 mm, The system consists of two units, one driven and the other idle. There are four wheels in total, two in each unit (drive and idler). The wheels are driven by heat-treated gears with high wear resistance. Model: 2k-TR-1 Load capacity: 1000 kg Workpiece diameter: 20-800 mm Roller diameter: Ø200 mm Roller width: Ø50 mm Rotation speed: 80-600 mm / min Hfsdswl Enkepfx Aacjn Connection voltage: 230 V, 1 phase 50 Hz Weight: 54 kg Control: Handheld control unit Control functions: Forward/Reverse/ Speed control/Non-stop IP65 Version: 1x drive unit with 1x idler and control cabinet incl. all functions and foot switch

Condition: used, machine/vehicle number: 92, Continous Form Collator Micro Pack S 50Serial-No. 92-164 / 1992/51/ mpkc 6 Stationen / Stations Hedpfx Aerbnnpjacofn Format / Size max. 330 x 12 Zoll umstellbar bis auf 7 Zoll / convertible until 7 inch Standard 240 x 12 Zoll / inch Einlauf breite bis / Infeed width until 55 cm Crimpung alle 2 Zoll mit Ersatzmesser / Crimp every 2 inches with spare blade Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Hfjderi Slmspfx Aacjn Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) - 2x 20 Ton pipe support (2500-3000 mm OD) - Plasma marking system Kjellberg Finemarker - Punch marking system - Can handle 18 meter long pipes - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine.

Condition: used, This is an LSQ5X welding power source from SKS Welding Systems, together with a Weld Process Controller MULTIPROCESS - Q80 and an SKS Frontpull 8 (23°) Hfsdpouxbx Dsfx Aacen

Condition: new, Year of construction: 2025, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Hfjdpfxswzv D Is Aacsn

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Friction welding machine from MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315 - Rexroth hydraulics - German user interface - CE Upon request, this machine can also be converted for many other welding tasks. Hfsdpfx Aajv Uzf Ejcsn

Condition: as good as new (ex-display), JUNE OFFER. FOR THE WHOLE OF JUNE -10% off all welding machines We offer welding machines in a wide variety of configurations and always have several sets in stock. CMT / ROBOT / CMT UNIVERSAL hose packages or HOLLOW SHAFT robots. Everything in stock and available immediately! Don't hesitate to request your customized configuration! We also have a wide variety of spare parts -30% -50% -70% in stock. Just send us a quick email, call us, or WhatsApp us. CMT MACHINES at 1/3 the new price! - 66% DISCOUNT Hodpfxshzhyns Aacofn ALL MACHINES CAN BE VIEWED IN VIENNA and PURCHASED WITHOUT WAITING! The prices listed are all starting from ... euros. The prices/offers are created individually according to the device configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) Vufdfi .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the product. Please see the numerous YouTube videos on the topic of CMT! Also available via WhatsApp and Viber Stocked in Vienna 1230 (Vienna) Shipping on pallets available for an additional charge: Austria approx. 180 euros Germany approx. 230 euros Europe upon request All prices are starting from prices. You can configure the devices with us. Robot device or handheld device. Long connecting hose package or short. Various hose packages to choose from. Synchropuls. 270 400 or 500 amp units in stock. CMT versions available as handheld or robotic. It's best to call us. We'll discuss your application and give you an initial price estimate.

Year of construction: 2001, condition: excellent (used), RICE REDUCTION!!! Instead of 1.150 EUR only 950 EUR!!! Dryer with material conveyor Moretto Type SHD25 power 2940 Watt Hfedpjpgultsfx Aacon Moretto material conveyor Type T 2L Vacuum pump Moretto Type VI T2

Condition: used, functionality: fully functional, Specific information see in passport included. Price on request. The demineralization plant was used to treat raw water in basically four technological steps: - Water pretreatment - preheating, clarification and filtration, - Water demineralisation is a chemical treatment in which all minerals, i.e. dissolved salts, Hjdpewwtp Tefx Aacofn are removed from raw (river) water. The resulting treated water is then virtually chemically pure H2O, containing only dissolved gases - oxygen, nitrogen and noble gases (carbon dioxide is removed), - Water softening stations for water treatment hot water circuits - Thermal degassing of water The demi-station technology also includes auxiliary equipment for chemical storage (storage tanks, bottling equipment ...), waste water removal (sumps, tanks ...), media transport (pumps, pipelines, storage and dilution tanks ...).

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Hfjdjurlcrjpfx Aacen Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, welding robot fully equip vertical bend arm robot - with 6 axes - reach: 1525 mm - with automat welding gun, type: DIX MALZ 520 - with wire feed device, manufacturer: FRONIUS, type:ROB.VR1500 DINSE-ZA - with 2 welding working tables (rotary table) - plate dimensions: each 1200 x 750 mm - with pneumatic driven cleaning device - with positioning straightening station for torch - with current source, manufacturer: FRONIUS, type: welding device TPS 4000 - with technical documentation - attention: the machine can be transported on a standard truck Technical attributes Hedpfjrl S Ufsx Aacsfn dimensions (l x w x h) approx. 4700 x 3500 x 3800 mm weight approx. 5000 kg year of construction 2000

Condition: as good as new (ex-display), Fronius TPS 4000 CMT ✅ Scope of delivery: ➤Fronius TPS 4000 CMT power source ➤Fronius FK 4000 ➤Fronius VR 7000 CMT wire feeder ➤Fronius Robacta CMT hose package or CMT hand hose package ➤Fronius intermediate hose package ~1.5m ➤Fronius RCU 5000i ➤Fronius Interbus Rugged Line interface ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) The prices listed start at ... euros. Prices/offers are customized based on the device configuration. CMT (Cold Metal Transfer) technology is particularly known for its high precision and flexibility when welding thin materials and delicate components. Unlike traditional MIG/MAG welding processes, CMT uses a controlled, pulsating wire feed, which transfers the welding wire very precisely into the weld pool. This minimizes spatter, enables excellent heat input control, and reduces distortion and discoloration of the material. We always have several machines in stock in different versions. Ask for a personalized configuration / additional options. ---- AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Vienna, Austria! ✔ Hedpowbixrofx Aacsfn Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►► ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.