Used Storage Vessel for sale (9,053)

Condition: good (used), Year of construction: 2007, Lift System, Megamat FSE 7.1, approx. 6.91m high, min. 331kg per tray, Tray size: approx. 3.06m x 81cm – used - : Price ex location: €18,500 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Model: FSE 7.1 3060/816-6910 Serial number: 500002536 Year of manufacture: 2008 Permissible total load: 70,000kg Load capacity per tray: min. 331kg (possibly 414kg or 536kg, depending on which type of tray is installed; this cannot be clarified in advance). Number of trays: approx. 50 pieces Tray size: 3060 x 816mm Equipment dimensions: Width: pending (should be approx. 3,450mm) Depth: pending (should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, rated operating current 17.8A, mains fuse: 25A Kodpfx Anjx Rzb Dewedn Condition: good Available: approx. end of May / beginning of June 2026 Location: 09337 Hohenstein-Ernstthal

Condition: used, Year of construction: 1994, Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coating is required depending on usage and product conditions. TECHNICAL DATA Manufacturer: TMCI Padovan Year of Manufacture: 1994 Quantity: 2 units Type: Isobaric pressure tank with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 150 hl per tank Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure Rating: 6 bar Dimensions (per tank): Outer Diameter: approx. 2,400 mm Cylinder Height: approx. 4,000 mm Kdjdpey Hknxofx Anwon

Condition: used, Year of construction: 1992, Overview These 4 isobaric pressure tanks (200 hl each) manufactured by TMCI Padovan in 1992 originate from the wine industry and were previously used for sparkling wine production. With their full cooling jacket design and pressure rating of up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and related products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used before stainless steel became the industry standard. They represent a cost-effective alternative to stainless steel tanks, particularly for producers seeking lower capital investment. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. Due to the coating system, regular inspection and renewal of the epoxy lining is required, depending on usage and product type. Technical Data Manufacturer: TMCI Padovan Year of Manufacture: 1992 Quantity: 4 units Type: Isobaric pressure tank with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 200 hl per tank Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure Rating: 6 bar Dimensions (per tank): Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 7,000 mm Total Height: approx. 9,000 mm Kdedpoy Hkl Defx Anwen

Condition: used, Year of construction: 1985, Overview These 5 insulated pressure tanks (100 hl each) manufactured by TMCI Padovan in 1985 originate from the wine industry and were previously used for sparkling wine production. Due to their pressure rating and full cooling jacket design, they are suitable for fermentation, maturation, and storage of carbonated products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used in the industry before stainless steel became standard. While not as common today as stainless steel vessels, these tanks offer a cost-effective alternative, particularly for producers with lower investment budgets. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. It should be noted that the epoxy coating requires periodic renewal, depending on usage and product type. Technical Data Manufacturer: TMCI Padovan Year of Manufacture: 1985 Quantity: 5 units Type: Pressure tank with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 100 hl per tank Material:Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure Rating: 6 bar Dimensions (per tank):Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 4,000 mm Ksdpfx Asy Hkkyjnwsdn

Condition: used, Year of construction: 2005, Overview These 8 isobaric pressure tanks (500 hl each) manufactured by Sirio Aliberti in 2005 originate from the wine industry and were previously used for sparkling wine production. With a working pressure of up to 6 bar and full insulation, the tanks are well suited for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, combined with polyurethane insulation and stainless steel external cladding. This design represents a traditional and cost-efficient alternative to stainless steel tanks, which became standard in later years. Thanks to their large volume and isobaric capability, these tanks are particularly suitable for high-capacity production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA Manufacturer: Sirio Aliberti Year of Manufacture: 2005 Quantity: 8 units Type: Isobaric pressure tank Application: Fermentation, maturation, storage of carbonated beverages Capacity: 500 hl per tank Material: Base: Carbon steel Internal coating: Food-grade epoxy Insulation: Polyurethane External cladding: Stainless steel sheet Working Pressure: 6 bar Dimensions (per tank): Internal Diameter: approx. 3,200 mm External Diameter: approx. 3,450 mm Cylinder Height: approx. 5,250 mm Leg Height: approx. 1,200 mm Total Height: approx. 7,800 mm Kedpfx Ajy Hkkajnwjdn

Condition: reconditioned (used), Year of construction: 2013, Thermocontainer used; overhauled showing signs of wear Type designation: C-720ü Technical data Interior: 610 x 810 x 1440 mm Outside: 735 x 955 x 1770 mm Weight: approx. 90 kg Content in litres: approx. 720 With slide-in bars for grids Features Locking in the middle of the door 2 lateral pull handles 1 folding handle in the door recess Trolley with castors 108 mm, PA, cold store safe Door-stay Inner tray with slide-in strips Angular corner supports with bend PE - sheets (2 mm thickness), light blue Profiled deflector plates (3 sides) 2 rigid wheels, 2 mobile wheels, padlockable with padlock Kodpfed Syhasx Anwjdn Loadable up to approx. 400 kg From company dissolution, REVISED Prices: net per piece plus the currently valid VAT. Fine cleaning is to be carried out by the buyer Auction consists of a container Colour sales depending on stock For time reasons, enquiries regarding this article can only be made to information of a telephone number can be answered. approx. 100 pcs. in stock Article is only offered for self collection. Do you wish a shipping, please contact us in advance by telephone

Condition: ready for operation (used), Year of construction: 1998, Fully automatic panel storage system offered. Suction traverse range: 1200x2655mm to 2100x4200mm, number of stacking positions: 36 pieces, stacking height surface storage system: 1600mm, stacking height storage position: approx. 400-600mm, control system: PLC. Equipped with integrated separate storage terminal, feed via robust roller conveyor, flexibly adjustable suction traverse. Overall dimensions X/Y/Z: approx. 33500mm/10100mm/3743mm. Inspection possible by appointment. Kedpsy U Nquofx Anwedn

Condition: good (used), Year of construction: 2013, weight max. 1200 kg table turning speeds 80 - 1600 mm/min. roll diameter 200 x 50 mm workpiece diameter 20 - 800 mm range L-W-H 520 x 470 x 390 mm Antrieb Kodpfx Ansy Erxijwjdn range L-W-H dito mm Mitläufer voltage 230 V / 50 Hz weight 56.0 kg current new price approx. 3,000 euros special price on request Product description: - For processing cylindrical workpieces - Flat frame - Swivel castors with polyurethane coating - Clearly arranged operating elements - Infinitely variable speed - The control electronics are protected by a robust and . enclosed housing - With foot switch for start/stop - Drive with DC electric motors and gearbox

Condition: used, 2-vessel stainless steel brewhouse (beraplan, 1997), mounted on a stainless steel frame with a work platform. The brewhouse comprises the following components: - Mash/wort kettle, steam heated, with propeller agitator, mashing nozzle, CIP head and 4 hop dosing hoppers. - Lauter tun with slotted false bottom, rake, spray heads and spent grain pump - Whirlpool as a separate stainless steel vessel (gross volume: 48 hl, manufactured by C. Gresser, 1978) - Two-stage plate heat exchanger (GEA Ecoflex) used as a wort cooler with wort aeration - Spindle station - Control console (Siemens) with buttons and screen for visualising the brewing process. - Control cabinet with S5 module and various other control and regulation elements. - Various other pipework, pumps, valves, measurement and control technology Additional title: Stainless steel brewhouse with a wort discharge capacity of 35 hl, built between Kodpjy Tiytjfx Anwsdn Cast wort capacity: 3500 l Operation / Control: Simatic S5-100U Features: Mash tun; lauter tun; whirlpool; wort cooler; wort areation; spindle station; control console; control cabinet; various pipes, pumps, valves, measurement and control equipment

Year of construction: 1999, condition: used, functionality: fully functional, 2 x 173 m³ Storage Silos made of Stainless Steel (Material 1.4301) (formerly used as plastic granulate silos) Technical Data / Dimensions Available units: 2 Volume: approx. 172,000 liters Type: Silo Condition: used Design: vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 21,000 mm Total height: approx. 17,500 mm Weight: approx. 9,000 kg Specific gravity of medium: 0.6 to/m³ Operating pressure: non-pressurized Ground clearance: approx. 500 mm Material / Specifications Internal shell material: stainless steel Remarks: Material grade 1.4301 Support type: base ring/stand collar Top base: conical top Slope: approx. 15% Bottom base: conical Cone angle: 60 degrees Top section: 1 x roof perimeter guard rail, height: approx. 1,200 mm 1 x crossover platform with guard rail 2 x lifting lugs 1 x manhole DN 600 1 x connection flange for level measurement 1 x welded socket for overfill sensor 1 x flange DN 100 (filling) 1 x vent with hood Kdedpfjxvtvuox Anwen Shell: 1 x operator access door (approx. 1,800 x 850 mm) 1 x cable conduit 1 x filling line DN 100 ending in TW connection 1 x welded adapter for empty indicator Bottom section: The silos terminate at the bottom in a 60° cone with an emergency shut-off slide valve and a mounted suction box (see photos). A triple-flight access ladder with back protection and rest platforms is optionally available.

Condition: used, Horizontal, insulated stainless steel pressure vessel (semi-trailer) made of V2A, WSt 1.4541, vessel with chassis - used - Contents approx. 22,500 liters Kdjdpfx Ansv Ifg Tjwon Operating pressure: 3 bar Inside diameter approx. 1,750 mm Outside diameter, with insulation approx. 1,950 mm Length approx. 9,850 mm Vessel with curved bottoms on the top of the tank within the insulation: 2 spray heads 1 tank ventilation on the rear dished bottom: 1 manhole DN 440 x 340 mm 1 outlet nozzle NW 50

Condition: used, functionality: unexamined, Used Hammerlift cleanroom gas purge/storage cabinet (“storage cabinet with nitrogen/XCDA flushing system”) Manufacturer: Hammerlit Voltage: 220–240 V Dimensions: 78 x 111 x 233 cm (depth x width x height) Kdodjyka Unopfx Anwen Multiple units in stock

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Kdsdpfjymayvox Anwon

Condition: good (used), Approx. 198 open front storage stacking bins, metal, similar to type 14/7-2, approx. 50 x 30 x 20 cm, with carrying bar - used -: Price per piece ex location: now only €7 instead of €9 (net)! Price for complete purchase: now only €5 instead of €9 (net) per piece. Manufacturer: unknown Type: similar to SSI Schäfer 14/7-2 l (for painted version) Dimensions: 50 cm deep x 31 cm wide x 20 cm high Internal dimensions: approx. length 450 x width 300 x height 190 mm Quantity: approx. 9,000 pieces Color: green With carrying bar Material: sheet steel Load capacity: Single: approx. 120 kg Stacked: 1,200 kg Volume: approx. 26 liters Weight: approx. 4 kg Kdedpsy Iv N Dofx Anwsn Condition: very good Available: immediately Location: approx. 198 pieces in 63843 Niedernberg

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm Kdodpfswka Upsx Anwjn - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: good (used), Support: 2 x 300 mm, Supplied without the yellow glass loading fork, Kdedpfx Ajtza Tdjnwjn Height: 3100 mm, Width: 1140 mm, Length: 3810 mm

Condition: good (used), Tyres new. 3 t. Kdjdpfx Anjy Nfnfjwjn

Condition: good (used), Year of construction: 2004, Hänel Rotomat 400 Paternoster Kdsdpfx Aney Nxp Ajwen The Hänel Rotomat 400 is a vertical carousel storage system (paternoster) that operates on the "goods-to-user" principle; it is used for both industrial storage and as an office lift for archiving purposes. The system makes optimal use of available ceiling height to maximize storage capacity within a minimal footprint. Areas of Application The Hänel Rotomat 400 is used across various sectors: Industry: For storing tools, measuring instruments, electronic components, and small parts. Office & Administration: As an automated archiving system for hanging files or binders. Medical Sector: For the sterile storage of surgical instruments. Overall dimensions (L): 260 cm Overall dimensions (W): 130 cm Overall dimensions (H): 285 cm Permissible shelf load: 150 kg Power supply: 3~ N+PE 400V / 50Hz / 5.5 kW Year of manufacture: 2004 Enhance your Paternoster A carousel storage system is only as efficient as its internal layout. Our specially designed storage bins utilize every last millimeter of shelf space. Find the right dimensions for your system in our other auctions. "A complete solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more storage lifts—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2007, Used Hänel Lean-Lift vertical lift in fully functional condition for sale. Ideal for storage, spare parts, tools, or industrial order picking. The unit comes from an operational facility. Technical data: Manufacturer: Hänel Office and Storage Systems Model: Lean-Lift 1300-825 Year of manufacture: 2007 Type: Vertical storage system / revolving shelf Voltage: 400 V Frequency: 50 Hz Power: 5.5 kW Kdjdpfxsy Ufrbj Anwsn Control system included CE marking present Load capacity: Max. container load: 250 kg Max. total load: 20,000 kg Maximum 33–34 containers Inspection possible by arrangement.

Condition: excellent (used), Year of construction: 2022, Four Kardex Shuttle XP 500 units from 2022 for sale. Since installation, the machines have been regularly maintained by the manufacturer and are in very good condition. These Vertical Lift Modules are equipped with trays measuring 4,050 mm wide and 813 mm deep. This is Kardex’s widest standard model, offering ample storage capacity while keeping the footprint to a minimum. The machines stand 4,950 mm tall, making them ideal for use in facilities with lower ceiling heights that still require increased storage capacity. Each tray provides approximately 3.3 m² of storage space. With about 35 trays per machine, each unit delivers around 115 m² of storage. Combined, the four machines offer approximately 460 m² of storage area, while occupying only 52 m² of floor space. Every tray supports up to 320 kg, giving each machine a total load capacity of up to 11,200 kg with 35 trays installed. If needed, additional trays can be added. All trays feature 75 mm high tray edges. Kjdpfxoy R U Nzo Anwodn The machines are in excellent condition and are ideally suited for companies looking to maximize storage capacity efficiently. Technical Information: Year of manufacture: 2022 Model: SHUTTLE-XP-500-4050x813 Machine height: 4,950 mm Machine width: 4,380 mm Machine depth: 2,972 mm Tray width: 4,050 mm Tray depth: 813 mm Number of trays: Approx. 35 per machine Maximum load per tray: 320 kg Electrical specification: 3/N/PE 400V, 23A

Year of construction: 2006, condition: excellent (used), functionality: fully functional, HEINZ OESTERWIEMANN | Insulated Vertical Pressure Vessel / Hot Water Buffer Tank Manufacturer: Heinz Oesterwiemann GmbH Serial number: 812 Year of manufacture: 2006 Kjdpjzczw Uefx Anwjdn Overall dimensions: Ø 3750 mm (diameter) x 12000 mm (total height) Capacity: 98,500 liters Maximum / minimum operating temperature: 70 / 5 °C This large-scale, insulated vertical tank from the German leader in process equipment technology, Heinz Oesterwiemann GmbH, is an advanced storage and buffer unit with a substantial nominal capacity of 98,500 liters. The unit was specifically designed for large food processing plants (meat processing plants, processing facilities, slaughterhouses, breweries), where maintaining a stable temperature of the process medium while minimizing heat loss is crucial. The tank operated as an industrial buffer for hot process water in a temperature range of 5 °C to 70 °C, supporting processes such as CIP cleaning, brewing, or boiler feeding. The construction is based on the highest quality acid-resistant steel, guaranteeing durability and absolute chemical inertness. The tank is equipped with efficient thermal insulation to protect the medium from cooling.

Condition: used, Exterior dimensions: Diameter Ø 2500 mm, total height 6500 mm. Kdedpfx Ajuixi Eenwjn Vertical, insulated stainless steel tanks – 4 pcs./identical Used 21,500 L, conical bottom with 3" outlet. Conical top with CIP. Insulated with 50 mm, completed with aluminium trapezoidal plates. Cooling/heating jacket in the lower part of the cylinder. Brand: Gjettermann & Nielsen A/S AISI 316.

Condition: excellent (used), functionality: fully functional, GEORG HEUER | Vertical silo / Large-capacity storage tank Manufacturer: Georg Heuer Behälterhandel und Industriebedarf GmbH Overall dimensions: Ø 3600 mm (diameter) x 12000 mm (total height) Ksdszczwnepfx Anwsdn This large-capacity vertical silo from the German brand Georg Heuer is a top-class industrial storage tank. The unit is designed for the safe, long-term, and hygienic storage of liquid raw materials, semi-finished products, liquid fats, brines, or process water on a large scale. These types of buffer units are a key element of the technical and logistical infrastructure in large meat processing plants, slaughterhouses, dairies, breweries, and fat processing plants and bottling facilities. The construction, made entirely of high-quality stainless steel alloy, guarantees complete chemical neutrality in contact with food products, fully protecting the stored product from changes in organoleptic properties or biological contamination. The vertical orientation of the tank, with an impressive height of 12 meters, allows for optimal use of the plant's space, ensuring maximum storage capacity with a minimum footprint. The design is ideal for both installation inside high halls and in open areas as an external tank park.

Condition: new, functionality: fully functional, tank capacity: 700 l, usable tank capacity: 700 l, total length: 1,000 mm, total width: 1,200 mm, total height: 1,470 mm, overall weight: 187 kg, wall material: stainless steel, wall thickness: 1 mm, number of chambers: 1, manhole diameter: 400 mm, manhole location: top, We offer this new Thielmann KB5-GGU storage tank silo, made of stainless steel. These are new, unused stainless steel bulk material silos. Liquid-tight Diameter of manhole: 400 mm Diameter of outlet: 250 mm (DN 25) Minimum wall thickness: 1.5 mm Filling volume: 700 L Net weight: 187 kg Stackable (load capacity 1710 kg) Kdodpfey Aft Uex Anwjn Made entirely of stainless steel with a slide valve. Total: 400 units available If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2018, functionality: fully functional, tank capacity: 400 l, The 400L steam cooking kettle, designed by Process Agro, is ideal for food industry professionals looking to increase their production capacity. With its 400-liter capacity, it allows for quick and efficient cooking of a wide variety of products. The use of steam ensures even cooking while preserving the flavor and texture of the ingredients. This kettle is therefore ideal for preparations requiring precise temperature control. Furthermore, its robust and reliable design guarantees extended use, even in intensive production environments. Furthermore, as a pre-owned model, this kettle combines performance and economy, making it a cost-effective choice for companies looking to optimize their cooking processes. Furthermore, its easy integration into various production lines improves productivity without compromising product quality. In summary, the 400L steam cooking kettle is a high-performance solution for food companies seeking efficiency, quality, and reliability in their cooking processes. Technical specifications: 400 L steamer bowl. Used steamer pot. Kdsdpfx Anju H Uznswen Manufacturer: Process Agro Capacity: 400 liters Year of manufacture: 2018 W3F57BIq