Used Stephen Zack Separator Systems for sale (36,960)

Condition: excellent (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, overall weight: 25 kg, type of input current: DC, input voltage: 220 V, power: 220 kW (299.12 HP), volume flow: 4.6 m³/h, control voltage: 24 V, year of last overhaul: 2025, Volumetric feeder type DM30-38 with horizontal feed line Equipped with D.50 mm screw at 50 mm pitch Supplied without hopper 1/38 brushless geared motor - 220 W - 3000 rpm Power supply 220 V mono 50 Hz Weight : 25 kg Nsdpfjrl Rv Tox Agnjku

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: CS27069, CS Clean Systems Cleansorb CS065SC Njdpowm Il Uefx Agnoku Shows slight signs of wear (see pictures)

Condition: new, functionality: fully functional, Year of construction: 2024, Equipment: CE marking, STAHL CRANE SYSTEMS SH6050-16 4/1 L3 Wire Rope Hoist Machine Lifting Capacity: 20 Tons Lifting Height: 10 Meters Machine Axis: 1400 mm Lifting Speed: 0,6 / 4 m/min Nedpfxoylxfhe Agneku

Condition: like new (used), Year of construction: 2017, The cartons are removed from the shingle stream of the folding box machine, stacked by hand and pushed onto the transit infeed conveyor of the US-2000 TRC 900. In the system, the stack is aligned, pressed and banded three times using side guides and a front stop. For the second banding, the front stop automatically moves to the next position, which was set via the display. position set via the display. A servo band motor enables individual band tensioning for edge-protecting banding of high-quality cardboard stacks. Cycle output up to 22 stacks/min. Nkjdevcyw Aopfx Agneu

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Njdpfx Agjxzuiaonsku

Condition: excellent (used), Year of construction: 2024, operating hours: 3,855 h, functionality: fully functional, machine/vehicle number: 1200F001894YW, Loading weight: 115–128 kg Drum volume: 1154 l Filling ratio: 1:10 – 1:9 Spin speed: 695 rpm G-factor: 350 Standard features: Nedpfx Ajw Nw Euegnsku - Direct steam heating - Freestanding, high-speed - Machine housing made of chrome-nickel steel (AIS 304) - Inner and outer drum made of chrome-nickel steel - Perforated inner ribs / PowerWash - Higher mechanical action - Low water consumption - Intuitive touch control XCONTROL FLEX PLUS

Condition: used, Year of construction: 2003, Fully functional ready to use. Please check out our other listing as well Njdpfx Agswt R Dmsnsku

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- Nedpjwqg Iijfx Agnoku 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Condition: • NEW, unused Nkjdpoxm Uf Sofx Agnou • Only storage marks present (see pictures) • No operating hours

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Width: 1,90 m Height: 2,10 m Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Running direction: clockwise Operation / Control: Schneider Electric Nsdow Tbgdepfx Agneku Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport

Condition: used, Year of construction: 2020, Cold glue labelling machine for wrap-around labelling of glass bottles. The glue is applied to the bottle in horizontal strips. A roller affixes the labels to the bottle. Nkodpfx Agow Ta Rhonsu Additional title: cold glue labeling Capacity up to: 6000 bo/h for cylindrical glass bottles Max. label length: 285 mm Formats: Euro 0.5 l and 0.33 l; wrap-around labels Operation / Control: control panel on machine side Base construction: Stainless steel housing on feet with plexiglass doors Features: Label magazine, 2.5 m motorised bottle conveyor belt, pneumatic glue pump, control panel on the side of the machine

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, compressed air connection: 16 bar, total width: 387 mm, total length: 565 mm, total height: 1,007 mm, overall weight: 75 kg, pressure: 16 bar, operating pressure: 8 bar, noise level: 120 dB, hose package length: 7,000 mm, High-performance dry ice blasting system IC 310 S with integrated dry ice mill IS 10 (built-in fully automatic crushing device) for delicate cleaning using micro-particles up to aggressive blasting on demanding surfaces. The patented dry ice mill IS 10 allows you to reduce 3 mm dry ice pellets to 1.5 mm micro-pellets as needed, enabling you to clean even sensitive surfaces, such as polished surfaces, pneumatic and electrical lines, machine panels, or vehicle interiors. The patented, continuously adjustable dosing system operates reliably without any loss of compressed air. The working pressure ranges from 1 to 16 bar. The compressed air supply hose is 10 m long. The integrated flow system prevents freezing and subsequent clogging at the hopper outlet. The design of the tube and hose system prevents the pellets from breaking. The blasting gun is ergonomically shaped, robust, safe, and easy to use. An optional LED lamp is available for the blasting gun. The stainless steel frame and machine housing guarantee a long service life. The machine requires only minimal maintenance costs, even under the most demanding operating conditions. The stainless steel hopper has a capacity of 13 kg. The dry ice consumption is between 10 and 100 kg/h. Included accessories: - Round spray nozzle RN-10-08 - Flex Case II Plus nozzle case (14-piece) Nsdpfowum Svjx Agnjku - External Module PAM-01 (7m hose extension) - M306 protective helmet (with comfort face shield) - Capsule hearing protection with helmet adapter - Length-adjustable air hose - Compressed air regulator with belt - 10m breathing air supply hose - Breathing air preparation unit - Ice scoop

Condition: used, Year of construction: 2016, Used Filling Monoblock MITSUBISHI up to 39000 BPH It is extremely important to note that this machine is complementary to it’s rinsing machine: (click here). The Filling Monoblock Mitsubishi offers an advanced solution in the bottling sector. Specifically designed to handle a wide range of liquids, it boasts a capacity of up to 39,000 BPH. Technical Specifications of Model FHRJ80M Mitsubishi Heavy Industries Mechatronics Systems Ltd manufactured the FHRJ80M model in 2016 to meet the growing demands for speed and precision in bottling. Equipped with 80 valves, this weight-based filling system accurately doses products, significantly minimizing waste. Moreover, the system fills aluminum bottles in various sizes ranging from 0.29L to 0.41L. Thus, it showcases its versatility for handling different types of liquids such as coffee (last product that has been filled by this monoblock), liquid soap, oil, and spirits. Bottling and Capping Features Furthermore, the Mitsubishi FHRJ80M monoblock integrates a capping function with 24 heads, accommodating aluminum screw caps of 28 mm and 38 mm. Its clockwise rotation direction eases integration into existing production lines. Additionally, the precision in cap placement and swift execution ensure the process’s efficiency, which is crucial for preserving product integrity and container safety during transport and storage. Nsdpfevgvlkjx Agnjku Storage and Maintenance Currently stored in a warehouse, the Filling Monoblock Mitsubishi remains in excellent condition to ensure its functionality and readiness. Also, the availability of instruction manuals aids in maintenance and repair operations, which are essential for extending the machine’s lifespan and maintaining optimal performance. Integrated safety features protect operators and the machinery, thereby reducing accident risks during operation. Conclusions of the Filling Monoblock Mitsubishi Finally, the used Mitsubishi FHRJ80M filling monoblock serves as an optimal solution for those seeking efficiency and reliability in the bottling industry. Its adaptability to various formats and product types, along with the precision of its filling and capping system, make it ideal for a broad range of industrial applications. With proper maintenance and careful management, this monoblock can deliver high performance, significantly enhancing production process optimization. This model not only meets but also exceeds industry expectations in terms of functionality and performance.

Condition: used, Year of construction: 2016, Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph It is extremely important to note that this machine is complementary to it’s filling monoblock: (click here). Introduction to the Used Rinsing Machine MITSUBISHI This rinsing machine serves as an advanced solution for the bottling industry. Specifically, Mitsubishi Heavy Industries Mechatronics Systems Ltd. manufactures this 2016 model RNR100H machine to ensure effective cleaning of aluminum bottles. Consequently, it addresses the critical need for efficient and reliable rinsing processes in high-demand production environments. Nsdpfx Asvgvhxegnsku Operational Capacity and Speed The RNR100H operates at an impressive capacity of 39,000 bottles per hour, making it ideal for high-speed production lines. Additionally, the machine handles aluminum bottles in various formats, including 0.29L, 0.3L, 0.31L, 0.4L, and 0.41L, thereby adapting to specific production needs. Moreover, the grippers rotate clockwise, which optimizes workflow and significantly enhances the rinsing process’s efficiency. As a result, manufacturers can achieve higher throughput without compromising on quality. Gripper System and Double Treatment Furthermore, the  Rinsing Machine MITSUBISHI  features 100 grippers, allowing it to treat numerous bottles simultaneously. This double treatment system involves two distinct phases: firstly, the machine uses water containing hypochlorous acid for effective disinfection. Subsequently, the second phase employs pure water to ensure the complete removal of chemical residues. Therefore, this dual-step approach guarantees thorough cleaning and minimizes the risk of contamination. Compatibility with Filling Machines A crucial technical aspect of the RNR100H lies in its compatibility with various filling machines. Specifically, the filling machines must have a corresponding height between 120 and 200 mm and a diameter between 50 and 80 mm. These parameters ensure optimal integration with existing production lines, thereby reducing adaptation times and enhancing operational continuity. Consequently, manufacturers can seamlessly incorporate the rinsing machine into their workflow without significant downtime. Mechanical Structure and Maintenance Moreover, the mechanical structure of the Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph guarantees durability and reliability. The machine’s components, made from high-quality materials, resist corrosion and wear, ensuring a long operational life even in intensive production environments. Additionally, the modular design facilitates preventive maintenance, allowing for the rapid replacement of worn parts. As a result, downtime is minimized, and maintenance costs are effectively controlled. Energy Efficiency Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph From an energy perspective, the RNR100H optimizes energy usage to reduce consumption without compromising performance.

Condition: used, Year of construction: 1909, 3D Systems ProCure 750 Used to cure 3D-printed parts in an automotive manufacturer's development department. All the lights are lit and the turntable is rotating. Njdjv Upuuepfx Agnsku

Condition: used, functionality: fully functional, The 16-channel FT2M control system from MTS was in use until recently and is now for sale. All 16 system cables for 16 control channels—force, displacement, and servo valve—are included. PC and system software are included. Equipment: 16 pcs: Dual Valve Driver Board 497.26 16 pcs: AC Amplifier Board AC Cond 497.13B Nodpswv Uqijfx Agnjku 16 pcs: Dual DC Amplifier Board 497.22C 4 pcs: 497.01 Analog Chassis (19" rack) 4 pcs: Power supply +-15V/+5V 4 pcs: Station Control Card 497.34 4 pcs: RS232 Communication Card 497.36 1 pc: Hydraulic Control Panel 497.05 for 4 stations 1 pc: Global Resources III Card 498.71B 4 pcs: ADDA Card 498.65 2 pcs: PROC CPU 498.96-3

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Nkjdpfx Asxtvb Usgnou Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, brushing machines, film storage paternoster, and membrane on machineseeker! Function: The feeding tray of the press is in position, the work piece carpet is pressed under the holding device. Nedpfxod S Dqne Agnoku With the vacuum it is hold in position and rotated by 180 °. Then the vacuum turns off and the work piece carpet is turned and the applied charge will be processed directly on the turn over device. Advantages: • The 3D-thermoforming productivity increases- because of quick clearing the table • Savings of time and staff - the preliminary cutting-out of the pressed parts is removed completely • Simple handling of the boards • The foil edges of the 3D furniture doors are not damaged, because the foil is not pulled over the edge of the door • Automatic transfer of the whole carpet to a carpet trimming machine is optionally available. • The pins will be protected with this turn over system because the cutout of the over standing foil is made not on the pin table. Details: • Rigid welded frame construction to accommodate the machine parts • Standard size 2800 x 2220 mm x 1200 mm • Hydraulic power unit • Turn table consisting of 9 arms with a special surface of rubber • Vacuum system with hose connections for the turn table • Turning cycle approx. 18-25 seconds • Control System: Siemens LOGO • Protective fences and security devices For the presentation of the turning process, a video is available.

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and membrane on machineseeker! RBM 1500 F e a t u r e s • Four-head rotating brush • Infeed inclined roller conveyor with separation • Spiral brush for removal of loose glue residues Nodpfx Ajd S Eagjgnsku O p t i o n s • Fifth head rotary brush • discharge roller conveyor with buffer function • Deionization of the furniture fronts after cleaning • Modem for remote maintenance A d v a n t a g e s • Chaotic occupancy by automatic Adaptation to front thickness and size • Up to 2000 parts / 8 h The RBM 1500 is a brush machine for film-coated 3DMöbelfronten. The proven four-head rotary brush system removes the Glue overspray on the backs of the furniture fronts and achieves an optimal edge quality. This result is achieved by the disc brushes pneumatically pressure-controlled touch down and the backs the fronts are singing. The RBM 1500 is for a performance of up to designed for 2000 parts per shift. This is the machine the optimal brush system for smaller and medium sized Productions. The RBM 1500 is with an automatic size and Thickness detection of furniture fronts equipped. This allows adaptation to chaotic loading without loss of time in the run. The flexible control offers the Possibility of brushing rectangle and contour parts. The low-maintenance brushes and long service life ensure low production costs. P r o d u c t i o n Machine: RBM 1500 Front shape: Rectangle / Contour Frontsize minimal (L x W x H): 180 x 90 x 15 mm Maximum frontsize (L x W x H): 3000 x 650 x 38 mm Brush operation: 2000 parts per 8 h Standard parts of 650 x 400 mm

Condition: good (used), In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage brushing machines, and membrane on machineseeker! Paternoster For the membran press membrane press FOILS-STORAGE-PATERNOSTER Nkjdpfx Aebgdv Iegnju for the foil-roles stock and at the membrane press Technical Description: Height of the paternoster 3800mm Max. foil width 1600mm Max. foil diameter 500mm 12pcs bearing rods Size of the paternoster 1000x2370x3800mm Inclusive foil transporter (trolly) Drive capacity 1,5 kW Total upload 4080 kg at a max. rolls weight of 340 kg Tools weight incl. Up weight- 5240 kg Specific ground-load capacity (1,89 to/m²) Pod-inside-diameter max. 90mm, bearing rods diameter 42,4 mm Side panels - total all over the overall height Protection lattice from 2,2 metres over the floor to the over edge overall-height Load chain as a hollow-bolt chain Fraction strength 100 kN, division 50mm = bearing rods-hanger system raster Rotation speed ca. 5,5 m/min Control with a key-switch with return (TOTMANN) for switch on/off Nominal voltage 400 V; 3N; 50 Hz mains (net) connection-pipe with CEKON-plug 16A Mains (net) fuse (construction sided)- 10A inert NO Price on request

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Washer for plastic cans and bags Nkodpfx Agswxy Hzeneu Brand: Boldt Systems Model: W 400.4.3.1 Serial number: BW0 04 122 Year of manufacture: 2005 Steam heated Stainless steel mesh belt Belt width: (3x) 380 mm Overall dimensions: 6000 mm x 2100 mm x 2400 mm

Condition: used, Lenght: 4,8 m Width: 1,2 m Height: 0.55 m Board separator with air cylinders. Nkodpfjhc Rh Iex Agnou

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Nkodow Inpnopfx Agnsu

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Nkodpfx Aeurlcrjgneu Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Njdpfx Agsnt Uc Rsnsku Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.