Used Stahlwerk Cut 100 for sale (34,823)

Condition: used, Thread cutting chuck BILZ Type DSPL 127 MK2 Thread size: M3 - M12 Mounting shank: MK 2 Length compensation: 30 mm Clamping range: Ø 2.5 - Ø 10 mm (tap shank diameter) - Chuck clamping for the tap shank and torque transmission on the square - Adjustable safety clutch for torque limitation - Length compensation +10 mm / -20 mm for precise pitch threading Maximum chuck diameter: Ø 58 mm Chuck length: 120 mm Total length with shank: 215 mm Net weight: 1.7 kg Very good condition Pjdpfxoy E T Daj Ampogk

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 380 h, load capacity: 200 kg, empty load weight: 2,650 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,820 mm, drive type: Elektro, arm reach: 3,000 mm, construction width: 990 mm, working height: 9,900 mm, Vertical lift platform Technical condition: good Front tyres type: solid (bandage) Front tyres size: 16-5-11 1/4 Front tyres condition: 80 - 100% Rear tyres type: solid (bandage) Rear tyres size: 16-5-11 1/4 Rear tyres condition: 80 - 100% Battery voltage: 24V Battery capacity: 250Ah Battery type: PzS Battery year: 2018 Battery condition: 80 - 100% Pgodpfx Amey Etzfepsk

Condition: used, Type: AE 100 S Part No.: 202-00023 Steps/revolution: 1024 Model/Version: 471/V001 Interface/Code: Parallel/Binary Output level: Push/Pull +(11-27) Volts Pgsdpfx Aey Apcmempsk Option: F/R, Latch incremental adjustment

Condition: ready for operation (used), Year of construction: 2008, This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for tact us for more information. • Laser type: Q-switched solid-state laser • Laser medium: Nd:YAG • Wavelength: 1064 nm • Beam quality (M²): 13 (6 kHz, MM); Pedpex Sz Efefx Ampegk

Condition: like new (used), functionality: fully functional, type: HZOS 100/60/1200/D/FU Pjdoyxqmljpfx Ampjgk perm. pressure: 250 bar piston diameter: 100mm piston rod diameter: 60mm stroke: 1200mm

Condition: like new (used), functionality: fully functional, type: HZOS 160/100/1200/D Podsyxqrbopfx Ampsgk piston diameter: 160mm piston rod diameter: 100mm stroke: 1200mm perm. Pressure: 250 bar

Condition: used, Year of construction: 2018, operating hours: 6,912 h, 2018 | GIPO GIPOREC R 100 FDR GIGA Impact | Used Crusher | 6912 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 253000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 61 inspection points 52 approved ✅ 9 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The crusher remains in active operation, so the hour meter will increase accordingly. It has been well-maintained, and all wear parts have been recently replaced to ensure it is in good working order. While the machine shows significant cosmetic wear and looks quite used, its mechanical condition is solid. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40734 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Pgjdpfx Asy Dhrpjmpjk ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 247,000 km, power: 243 kW (330.39 HP), axle configuration: 6x2, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 8,600 mm, loading space width: 2,470 mm, loading space height: 2,450 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, tail-lift, traction control, General information Year of manufacture: 2020 Axle configuration Pedpfx Asy Em Thompogk Front axle: Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle 1: Double wheels; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40% Rear axle 2: Steering; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 12.728 kg Carrying capacity: 13.272 kg GVW: 25.999 kg Functional Tail lift: Dhollandia , tail lift, 2500 kg Make of bodywork: Lambaret Thermoking T 100R Height of cargo floor: 223 cm Cooling engine: diesel and electric = Additional options and accessories = - Camera system - Heated driver's seat - Heavy duty engine brake - Lifting axle - Lock diff - Outside temperature display - Radio with bluetooth - Rear air suspension - Reversing camera - Visor = Remarks = MOT valid until 24-01-2027

Condition: new, Year of construction: 2025, table length 3050 mm table width 1530 mm burner heads 1 stroke 350 mm Pgjdpfx Amjwp Ta Njpjk speed 140 m/min

Condition: good (used), Cutting / Centering Machine UMA SZM 100 E Year of manufacture: 1976 Pjdpfx Ajxt Dzpempegk Serial No.: 33-0241 Clamping range: 10–160 mm Diameter for facing up to 100 mm Clamping length: 90–1950 mm Drill spindle: ISO40 DIN2079 2 clamping fixtures - Special program for internal threading with reverse feed and spindle reservation as a second program in automatic mode - Automatic triple chip-breaking for deep drilling - 2-edge positive tool head with 12H7 keyway for overcutting holders with 2 carbide indexable inserts SPGN 190 (DIN4968), with holder for centering drill R4.0 mm The machine was in use until recently and is fully operational. Price: net, ex stock, loaded.

Condition: used, mileage: 1 km, power: 353 kW (479.95 HP), first registration: 06/2002, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: other, total length: 5,900 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2002, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, power assisted steering, retarder, spoiler, = Additional options and accessories = - Roof spoiler - Tipping hydraulics - Radio/CD player - Sleeper cab - Sun visor Pgedpfsy En T Aex Ampok - Immobiliser = Further information = Front axle: Tyre size: 385/65 R22.5; Steered; Suspension: Parabolic suspension Rear axle: Tyre size: 315/80 R22.5; Twin tyres; Suspension: Air suspension Unladen weight: 7,430 kg

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel Podpfx Amsh Eyd Repogk OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing ) Pgedpfx Amjiyyc Ejpjk

Year of construction: 1996, condition: reconditioned (used), Stock-No.1624 Strand "spagetti" pelletizer Capacity 500 kg/h Drive 4 kW Rotor width 200 mm - double bearring materials: PP,PE,PS,PET,PC,PA div material Noise- protected housing box Pedoby I Syepfx Ampjgk OPTIONAL against additional cost: adjustable pellet length device Ask for our machine-stock-list, with more pelletizing equipment ex our stock availabe.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit Pgodpfx Asi Dtb Ujmpek More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve control-board and Siemens Touch operation panel (updated ) OPTIONAL against additional price Pedped Sg I Isfx Ampegk ᐳ * Vacuum pump ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: new, machine/vehicle number: 13358, Rotor diameter: 400 mm Rotor width: 1000 mm Rotor knives: 3 x 2 Stator knives: 2 Feed opening approx. The compact inline granulators of the GST 400 series are primarily designed for use in blow molding applications to recycle bulky parts such as bottles, canisters, and crates, as well as blow molding and injection molding sprues. Pgodpfsy E Altex Ampjk The low feed height allows for both manual loading and feeding of these parts via conveyor belt. The low noise level and small footprint make them the ideal solution for inline recycling applications.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Planing width: 630 mm Planing height: 3 - 300 mm Maximum cutting depth: 8 mm Pgedey Eizuopfx Ampjk Table length: 1100 mm Cutterhead speed: 5000 rpm Feed motor power: 0.55 / 0.75 kW / 0.8 / 1.0 HP Extraction port Ø 160 mm, usable on left and right Feed speed: 7 + 14 m/min Main motor power: 7.5 kW / 10 HP Voltage: 400 V / 50 Hz Space requirement approx. 1070 x 1200 x 1060 mm Net weight approx. 1050 kg TECHNICAL DESCRIPTION Robust German engineering. For thickness planing with a planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions. PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives. Pendulum-mounted feed rollers. Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and secure workpiece feed. With segmented pressure bar. Electric height adjustment of the thicknessing table, tilt-resistant on 4 trapezoidal thread spindles. With finely planed thickness table. Positioning control 4.3" touchscreen. Automatic star-delta start. Mechanical motor brake. Extraction port 160 mm, usable on left and right. Machine calibrated at the factory. CE compliant GS tested Standard equipment as follows: Solid steel cutterhead with 4 Tersa reversible knives Standard quality for 630 mm planing width Rubber infeed roller Rubber outfeed roller Thickness table without table glide rollers Positioning control 4.3" touchscreen 2 feed speeds 7 + 14 m/min Touch panel 4.3" Location: Flörsheim Availability: Immediately

Condition: good (used), Colchester Tornado 100 CNC Lathe - Max. turning diameter: 400 mm - Distance between centers: 500 mm - Bar capacity: 42 mm - Year of manufacture: 1995 - Weight: 2,400 kg Pedpfx Amsy Einhjpogk - Turret with 12 stations - VDI 3425 / 30 tool holders Hydraulic collet and chuck

Condition: good (used), functionality: fully functional, Year of construction: 1999, operating hours: 42,254 h, control type: CNC control, controller manufacturer: MAZATROL, controller model: L32-B, laser type: CO₂ laser, laser power: 1,500 W, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working length: 2,500 mm, working width: 1,250 mm, travel distance X-axis: 2,650 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 100 mm, workpiece weight (max.): 300 kg, input voltage: 400 V, input current: 85 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 8,000 kg, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, The machine is part of our workshop since 2020, as a part of a startup for sheet metal working. Meanwhile, since busniness is growing, we are planning to switch to a faster fiber laser machine. Recently the machine had a major service. Still in use 3-4 days/week. Specs: 1500W Working dust extraction Pgodpfx Aeyvp Rdompsk Good working chiller PC with nesting sofware included New output coupler All new oils Inspected/cleaned/replaced external mirrors

Condition: good (used), Year of construction: 2011, functionality: fully functional, pressing force: 100 t, stroke length: 315 mm, overall weight: 8,000 kg, Hydraulic Press Brake Manufacturer: BYSTRONIC Model: Xpert 100/2050 Year of manufacture: 2011 Technical Data Make: BYSTRONIC Model: Xpert 100/2050 Year: 2011 Press Force: 100 t Bending Length: 2000 mm Stroke: max. 315 mm Motor Power: 7.5 kW Dimensions: approx. L 3.10 x W 1.90 (plus support arms) x H 2.85 m Weight: approx. 8 t Equipment: • Controlled axes: Y1, Y2, X, R, Z1, Z2 • PILZ Fast Bend light barrier • Controller: MMC BYBEND • Hydraulic tool clamping (top and bottom) • Hydraulic pressing table!!! • Movable support arms Pedpfx Amjy Ef Rxjpsgk • CNC-controlled crowning • 1 upper tool, gooseneck, H 150mm, 80°, segmented • 1 lower tool V12 All information is supplied without liability. A demonstration in our showroom is possible at any time.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, Bystronic laser Pgedpfxeydq Hns Ampok

Condition: like new (used), Year of construction: 2022, Complete refurbished Ficep machine . Psdpfx Asx H T H Rempegk

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Machine has very low hours Pgedpfx Amjv Iaqyjpsk

Condition: used, Year of construction: 1997, operating hours: 3,861 h, overall weight: 1,500 kg, rotor diameter: 235 mm, total length: 2,500 mm, total height: 2,500 mm, total width: 1,500 mm, rotor width: 794 mm, power: 11 kW (14.96 HP), filling opening width: 800 mm, filling opening length: 1,000 mm, No. 04527 Single-shaft shredder Vecoplan VAZ 100/80 U40 Used, year of construction 1997, 3861 operating hours Pgjdpfxsy Hlgis Ampok The waste shredder VAZ 100/80 is designed for shredding wood waste, pallets, crates, particleboard and fiberboard, paper and cardboard, plastics, etc. The machine is most commonly used to produce fuel chips from wood waste, wood scraps, and pallets. Feed opening 1000 x 800 mm LW Universal rotor, tool size 40 Connected load 13 kW, drive power 11 kW Throughput capacity for logs 250 - 350 kg/h Throughput capacity for particleboard 800 - 1000 kg/h Screen hole size (diameter) 25 mm Rotor diameter 235 mm, rotor width 794 mm, speed 95 rpm Rotor mounted in self-aligning roller bearings with steel housing Feed unit made of channel steel, driven by hydraulic cylinders Guided in brass rails, with rollers on the sides Main drive via gear motor with two-stage worm gear Motor speed 95 rpm Automatic foreign object breakage protection PLC control, automatic mode / manual mode Hydraulic unit with 2 operating speeds 2 suction connections on the sides, 200 mm each Currently, the machine is designed so that the wood chips fall downward. If the opening at the bottom is closed, an extraction system could be connected. Includes 1 new counter blade, various cutting blades, complete technical documentation Transport dimensions approx. 2500 x 1500 x 2500 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse