Used Sprue Picker for sale (217)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 612334X00379, Year of construction: 2020, operating hours: 2,810 h, load capacity: 750 kg, lifting height: 10,610 mm, fuel type: electric, construction height: 4,400 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,250 mm, overall weight: 8,330 kg, Equipment: lighting, Attention: The complete equipment list of the vehicle is included as a photo in the images of the ad! STILL Order Picker MX-X 80 – Used unit with premium features, single sale Vehicle Data: - Model: STILL MX-X 80 (Very Narrow Aisle Truck with Pivoting Reach Fork) - Year of manufacture: 2020 | Operating hours: approx. 2,810 h - Load capacity: 800 kg | Lift height: 8,750 mm | Height: 4,400 mm - Additional lift: 1,800 mm | Fork length: 1,250 mm | Aisle width: 2,200 mm - Pivoting reach fork: 180° swiveling, max. 1,400 kg at 600 mm LSA - Adjustable forks: hydraulic, outer width 400 – 1,650 mm Features (Selection): - Mobile personal protection system with 2 laser scanners, fully factory-integrated - Special design pivoting reach fork carriage with reinforced capacity, reach carriage for wide loads up to 2,600 mm - IZF – Inductive Guidance System with guide wire detection, lane detection, automatic aisle recognition & emergency stop on signal loss - Cabin: Combined design for standing/seated order picking, with LED work lights, warning beacon & polycarbonate windshield - Ergonomic driver’s seat (fabric-covered, height & tilt adjustable, suspended), foldable - Control panel: multifunctional, steering knob, 5 programmable favorite keys, contactless two-hand sensor, MMS terminal preparation - Safety: automatic braking, stop & absolute stop at aisle ends, rescue lowering system, RFID-controlled height limit (2 definable heights) - OPTISPEED 3.0: dynamic load display depending on fork height, automatic reach reduction - Additional equipment: Panoramic rear-view mirrors on both sides, DIN A4 writing pad, modular accessory system on cabin railing Battery & Charger: - 80V traction battery (930 Ah), low maintenance, with central water filling system (STILL) - External charger D 80/100 PXS, charging time approx. 9–11 h, 400 V / 32A CEE, LED charge status display Special features: - Extended chassis – ideal for special pallets/corlettes – no disadvantage in racking applications Pgodpfxjw U El Tj Ac Ast - Machine is currently set up and ready for demonstration - Single unit – not available as a series sale, we bought the truck ourselves 1 year ago but did not set up a warehouse Condition & Removal: - Very well maintained, fully functional, no known defects - Removal only possible by crane (hall height 10 m) – disassembly required and to be organized by the buyer or by arrangement

Condition: good (used), Description Articulated conveyor belt from Frasch with an attached separating screw for separating sprues and parts. FS add-on separator Features: Separation of parts with small size differences Drive via the conveyor Precise adjustment of the sliding plate via threaded spindle Lever-free discharge side Safety slip clutch Robust design FS500 left (separator) Conveyor belt length: 1,300 mm Conveyor belt width: 300 mm Overall length: 2,500 mm Pgjdpfx Asziwqcsc Ast Overall width: 600 mm Overall height: 1,200 mm Total weight: 80 kg Input voltage: 400 V Input frequency: 50 Hz

Condition: good (used), functionality: fully functional, Year of construction: 2021, Manufacturer: Jungheinrich Type: ERE 225 Year of manufacture: 2021 Design: Low-lift order picker Drive type: Electric Load capacity: 2500 kg Year: 2021 Hours: 7443 Condition: Used Fork length: 2400 mm Pedpszr Ifvsfx Ac Aegt WITHOUT CHARGER! Price: Net, plus VAT.

Condition: new, machine/vehicle number: 26654, Year of construction: 2026, operating hours: 1 h, load capacity: 1,000 kg, lifting height: 715 mm, mast type: simplex, construction height: 1,244 mm, .: 26654 Device details: Year of manufacture: 2026 Load capacity: 1000 kg Lifting height: 715 mm Recorded operating hours: 1 h Mast type: Standard Mast height: 915 mm Length/Width/Height: 1655 / 540 / 1244 mm Operating weight: 143 kg Additional device information: ---- The operating hours are generally recorded hours. We would be happy to offer you the appropriate transport. We have another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We would be happy to buy your OLD one. Do you have any questions? Podszik Hkspfx Ac Aegt During our business hours from 7:30 a.m. to 4:00 p.m., you can reach us. We look forward to hearing from you! We speak English. Intermediate sale and errors for this offer are expressly reserved. In the dealer business, the device is sold in its current condition, without refurbishment. All information without guarantee, errors and changes excepted.

Condition: excellent (used), Year of construction: 2017, Available: 2 pieces! condition to check Pgjdpfsvday Hjx Ac Ast Possibility to buy the high-lift order picker with a set of brand new batteries with a 2-year warranty for 3,500 euros or for 3,000 euros with used batteries Year of production 2017 Load capacity 215 kg Lifting height 3000 mm Travel speed 8 km/h Total length 1528 mm Battery voltage 24V Model EKM-202 Negotiable with larger quantities, big discounts! The agile and versatile EKM order picker is ideal for use in stores, for light maintenance work or order picking without a pallet. The stable mast allows you to lift items up to the third level of the rack - this is the best alternative to a traditional ladder. Automatically closing doors ensure operator safety even at high lifting heights. A sensor mat on the floor increases mobility in the driver's cabin, so the operator can freely choose his position on the standing platform. The spaciously designed workspace guarantees the operator greater comfort while driving and standing sideways. Good visibility in the direction of travel is provided. Ergonomically positioned controls allow simultaneous lifting and steering, which makes working with the EKM very efficient.

Condition: used, functionality: fully functional, machine/vehicle number: 90485094, Year of construction: 2015, operating hours: 5,810 h, load capacity: 2,500 kg, fuel type: electric, fork length: 2,400 mm, empty load weight: 950 kg, drive type: Elektro, Low-lift pallet truck Chassis number: 90485094 Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Battery type: PzS Battery year of manufacture: 2016 Description: Jungheinrich ECE 225 - Horizontal order picker, No.: R0832, Year of manufacture: 2016, Battery year of manufacture: 2016, Operating hours: 5,810, Fork length: 2400 mm. The device is in normal visual condition and in good technical condition. Fast and uncomplicated transport possible by arrangement! This advertisement serves only to identify the device! A detailed description of the condition and possible features will be provided individually upon request! Errors and prior sale reserved, sale only to commercial businesses. Every sale of used goods is made with the exclusion of any warranty or guarantee. If you have not found your forklift, please contact us. We have a large selection of other equipment in stock. Pedpsz Ecvajfx Ac Asgt

Condition: good (used), Year of construction: 2020, load capacity: 2,000 kg, empty load weight: 1,249 kg, operating hours: 14,011 h, mileage: 14,011 km, fuel type: electric, Horizontal order picker STILL comes from 2020 and is in good condition;Capacity of 2,000 kgForks are 2,390 mmBattery is equipped with an external charger and an automatic filling systemWatch the video on YouTube Pgodpfxewbf U Ao Ac Ast

Condition: used, Year of construction: 2009, weight max. in kg 1000 kg stroke 2750 mm fork length 1200 mm Pgodpfozip Igjx Ac Ajt battery 24 / 620 V / Ah weight of the machine ca. 1,9 t dimensions of the machine ca. 2,9 x 0,82 x 2,52 m Order picker with charger. Battery new in 2022.

Condition: used, Year of construction: 2007, used to produce innerliners Equipment Specifications Summary Forming and Tool Dimensions Maximum frame inner size: 2005 × 905 mm Maximum tool base size: 2000 × 900 mm Minimum tool base size: 700 × 500 mm Maximum sheet size: 2090 × 960 mm Minimum sheet size: 790 × 560 mm Maximum tool height: 800 mm (550 + 250 mm) Maximum formed workpiece height: 550 mm Maximum sheet stack height: 1000 mm Maximum pallet height: 180 mm Heating System Upper heating power: 83.3 kW Lower heating power: 71.3 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Drive Motors & Auxiliary Equipment Oil pump motor power: 19 kW Vacuum pump motor power: 23.4 kW Sheet centering motors power: 0.24 kW Sheet feed motor power: 2.2 kW Sheet feed width-adjustment motor power: 2.2 kW Sheet picker motor power: 0.37 kW Fan motor power: 5.5 kW Shear motor power: 2.2 kW Carriage motor power: 2.2 kW Rotary table motor power: 1.1 kW Scrap cutter motor power: 3.0 kW Scrap conveyor motor power: 0.37 kW Finished workpiece discharge belt motor power: 0.75 kW Cross-cutting motor power: 0.25 kW Cross-cut scrap conveyor motor power: 0.22 kW Transfer unit motor power: 1.5 kW Auxiliary units maximum consumption: 5.1 kW Tempering unit power: 52 kW Electrical Requirements Maximum installed power: 375 kW Power consumption at 70% load: 262.5 kW Vacuum System Vacuum pumps capacity: 750 m³/h (250 × 3) Tool vacuum tank capacity: 2,000 L Bell vacuum tank capacity: 2,000 L Hydraulic System Required oil quantity: 600 L Hydraulic operating pressure: 10 MPa Maximum hydraulic operating pressure: 18 MPa Pneumatic System Required air pressure: 600 kPa Compressed air consumption: 1,300 N liters/cycle Cooling Water Requirements Incoming water pressure: 200-300 kPa Incoming water temperature: 12-20 °C Outgoing water temperature: 30-35 °C Mechanical Characteristics Lower tool holder force: 9,000 kg Machine weight: 35,000 kg (35 tonnes) Key Utility Requirements Electrical Supply: 375 kW installed load Compressed Air: 600 kPa, 1,300 N liters/cycle Cooling Water: 200-300 kPa at 12-20 °C Hydraulic Oil Capacity: 600 liters Vacuum Capacity: 750 m³/h with two 2,000-liter vacuum tanks Fully automatic thermoforming machine designed to shape plastic sheets suitable for high-capacity industrial applications. Thermoformer details: Forming area 2005mm x 905mm Max forming depth 550mm 3x loading stations. 1 x heating station. (pre-heating, final heating, upper and lower elements) - ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Pjdezumt Djpfx Ac Ajgt Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial grade build with multiple access doors, observation windows, and integrated ventilation heat management. Year of manufacture 2007.

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225P (lift2move) Serial No. 19500S, Year of manufacture 2008 Model No. Rated load capacity 225 kg Lifting stroke 1680 mm Lifting height 2200 mm Lifting speed (unladen / laden) approx. 100 / 75 mm/s Outreach of lifting device 861 mm Chassis length 1020 mm Ground clearance 90 mm Underneath length 600 mm Chassis design (front / rear) Ø 80 / 140 mm (2 fixed / 2 swivel castors) Overall length 1400 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator Pedpfx Aeflt Edjc Ajgt - 2 units of 12 Volt, 17 Ah lead-acid batteries installed in the battery pack - External charger 24 VDC, 3 Amps (mains voltage 230 V, 50 Hz) - Can be moved manually, swivel castors with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard Special version: lifting device from GIESLER for radial fan SC-1000 CP XT (Tiger) - Load capacity of the lifting device 25 kg - Lifting device can be swivelled 90° via manual hydraulic pump - Opening width between the support jaws 300 / 330 mm - Opening width between the clamping rollers 200 - 300 mm - Clamping is done via handwheel - Weight of the lifting device 60 kg Total weight 140 kg very good condition

Condition: used, Electric stacker – pedestrian stacker, tow stacker for ergonomic handling of small loads EXPRESSO Type Lift & Drive 125 (lift2move) Serial No. 194679 Year of manufacture 2015 Type No. 1418242111 Rated load capacity 125 kg Lifting height 1450 mm Total lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting support 530 mm Chassis length 890 mm Ground clearance 90 mm Underrun length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel casters / 2 swivel casters) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Battery charge level indicator - 2 pcs lead-acid battery 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 Amperes (mains voltage 230 V, 50 Hz) - Manually steerable, swivel casters with three-stage parking brake - Handle continuously adjustable in height Pjdpfx Asflt Ebec Aegt - Load receiver U-profile for square profile according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm / 4 mounting holes M8 at a distance of 50-60-50 mm Mounted lifting support: Special design from GIESLER LAM-DC power rail Load capacity of lifting support 40 kg Weight of lifting support 24 kg Support rail laterally adjustable by +-90 mm via linear guides (3 locking points left, center, right) Support rail swiveling +-38° (infinitely adjustable and lockable) Support rail with 2 clamping jaws Distance between the clamping jaws 550 mm Material clamping thickness 100 mm Dimensions of material support W x D 650 x 155 mm Total weight 75 kg very good condition

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker Pgsdpfx Aoflt Egoc Ajt for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225 (lift2move) Serial No. 19153-HD, Year of manufacture 2010 Type No. Rated load capacity 225 kg Lifting stroke 1770 mm Lifting height 2350 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting arm 400 mm Chassis length 1130 mm Ground clearance 90 mm Underrun length 600 mm Chassis design (front / rear) Ø 80 / 150 mm (2 fixed / 2 swivel casters) Overall length 1130 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually movable, swivel casters with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard 380 x 50 mm / 4 mounting holes M10 at a distance of 100-120-100 mm Mounted lifting attachment: Quadruple lifting fork, Expresso type, load capacity of the lifting attachment 40 kg - Lifting attachment can be swivelled by 90° by hand (can only be locked in the 0° position) - Lifting attachment can be moved laterally by +-100 mm on linear guide (locking only in the center) - Width between the support arms 320 mm - Height between the support arms (height can be locked at) 365 / 400 / 450 mm (max. opening width without locking hole 510 mm) - Depth between the support arms 150 mm to the stop bolt / 300 mm maximum Total weight 100 kg Good condition

Condition: used, Year of construction: 2010, Injection moulding machine Arburg 370H 600-290, year 2010, incl. Wittmann picker Injection moulding machine Arburg 470C 1500-400, year 2006, incl. Wittmann handling Pgodpey R Tg Eofx Ac Aot

Condition: used, Wide-track high-lift truck, pedestrian stacker, drawbar stacker HANSELIFTER - Hanse-Lifter, Model E-SDJ1016-01 Wide-track lift truck Standard model. Year of manufacture: 2014 Rated load capacity, drawbar stacker: 1000 kg Load capacity, special attachment GIESLER: 200 kg Rated lifting height: 1600 mm Podpfx Acjhxvuwo Asgt Fork length: 530 / 770 mm Fork carriage width: 950 mm Ground clearance under wheel arms: 130 mm Operating voltage, hydraulic unit: 12 volts Overall height: 2160 mm Overall length: 1650 mm Overall width: 1860 / 1200 mm - Manual drive operation - Electro-hydraulic lifting mechanism - Adjustable track width from 950 to 1650 mm (width between wheel arms) - 1 piece, 12-volt battery - Separate charger, 12 volts, 15 amps - Fork base carrier on lifting frame made of steel - Fork carriage, special attachment GIESLER, load capacity 200 kg - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Fork tines made of stainless steel, total length 770 mm to pivot plate - Fork tines cannot be lowered to the ground due to the special attachment (approx. 170 to 250 mm depending on track width) Self-weight: 485 kg Like new condition

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Pgedpew U Sz Iefx Ac Ajt Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 612332V00006, Year of construction: 2019, operating hours: 8,893 h, load capacity: 1,000 kg, lifting height: 4,780 mm, free lift: 1,850 mm, fuel type: electric, mast type: duplex, fork length: 1,190 mm, TECHNICAL DETAILS Lifting height: 4,780 mm Lifting capacity: 1,000 kg Free lift: 1,850 mm Overhead clearance: 2,930 mm Fork length: 1,190 mm Fork width min.: 300 mm Fork width max.: 680 mm MACHINE DETAILS Mast type: Duplex Pjdpfszulkuex Ac Aegt Drive type: Electric Battery type: 4 PzS 620 Battery year of manufacture: 2019 Battery capacity: 620 Ah Battery voltage: 48 V Operating hours: 8,893 h Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,680 x 2,920 mm Unladen weight: 6,225 kg EQUIPMENT Free lift Non-marking tires Semi-cabin Height indicator User manual available CE marking

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 2 units SSI Schäfer LogiMat-2425 from 2019 for sale. Very sparsely used and in as good as new condition. SSI Schaefer is one of the world's largest companies in warehouse automation and their Vertical Lift Module "LogiMat" has gained a lot of ground in the world in recent years. These 2 lifts come with a good height of 9 950 mm - if you have enough ceiling height in your warehouse or factory, it means the possibility of really compact storage on a small floor surface. If necessary, the machines can be lowered to the desired height. The trays have a width of 2 425 mm and can handle a load of 300 kg, the combination means that the vertical storage lifts also work for businesses with heavy goods. The VLM's come with the option "LogiTilt", a function where the shelf can tilt in the opening of the machine and thus improve the ergonomics for the picker. In addition to the tilt function, the lifts also come with a laser pointer. If the machines are connected to your ERP or WMS, the laser pointer can indicate which picking location goods should be picked from. The machines can be purchased separately or in pairs. Available with a delivery time of 4-6 weeks. Shipping and installation is additional. These vertical lifts are configured with 3 225 mm wide shelves but with slightly shallower shelves than standard, 625 mm, this is often appreciated by warehouse / factory staff for ergonomic reasons. Each shelf provides 2.02 m² of storage space and with 34 shelves per lift, this gives about 68.5 m² of storage space on a floor area of about 10 m² per machine. Podpfx Acey D St Rs Aegt The Vertical Lift Modules are each equipped with a 17" touch display and without external software, the control panel can be used to manage shelves, handle user management, optimize shelf placement and monitor the weight of each shelf. The lifts can also be connected to a WMS/ERP if necessary. These objects come with the option "LogiGate"; doors in the opening that open/close when the elevator machines pick up/drop off shelves. This option reduces dust and dirt in the machine and lowers the noise level when the lift is running. The items can be purchased separately or in packages of 2 or 3. Available from the end of October 2023. Shipping and installation not included. Manufacturer: SSI Schäfer Manufacturing year :2019 Model: Logimat SLL 3225-625-6950/200 Height: 6 950 mm Width vertical lift module / tray: 3 735 mm / 3 225 mm Depth vertical lift module / tray: 2 712 mm / 625 mm Number of trays: 34 trays per unit Maximum weight per tray: 200 kg Electronics: 25 A, 400 V

Condition: excellent (used), Year of construction: 2008, Arburg 370S 600-70 Year of manufacture: 2008 Injection Unit: Screw diameter: 25 mm Shot weight: 40 g Injection pressure: 1,550 bar Metering volume: 44 cm³ Clamping Unit: Clamping force: 60 t Tie bar spacing: 370 x 370 mm Platen size: 510 x 510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: - Euromap 67 - Robot interface - 8x air valves - 1x hydraulic core pull - Controller for hot runner (6 zones) - Injection unit: hardened, bimetallic - Integrated sorting flap - Integrated original Arburg side gate picker - Option to set up vertical injection unit using special brackets Pgedpfezy Ifxox Ac Aot - Screw diameter can be changed to 22, 25, or 30 mm Dimensions: Weight: 3,160 kg Length/Width/Height: 3.48 x 1.46 x 2.03 m All machines offered are started and tested by our technicians prior to sale. A video of the technical tests for the selected machine can be provided, or live technical tests can be attended at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2014, System with 2x ABB FlexPicker robot IRB360 M2004 We have a total of 5 systems available! The price is per machine ! Total dimension: L: 7800 mm W: 2300 mm H: 2500 mm Further details and scope of delivery see photo. For technical data, see type plate. Item condition: used, untested condition: used, untested sample photos sample pictures A viewing in Rietberg is possible! If you have any further questions, please contact us by email. Pgsdpfx Astzxgpjc Ast The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material and legal defects! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,370 h, functionality: fully functional, machine/vehicle number: 40 6003, spindle speed (max.): 12,000 rpm, spindle bore: 20 mm, bar passage: 20 mm, controller model: Fanuc 31i-B, Equipment: chip conveyor, Only 3,370 spindle hours! TECHNICAL DETAILS Spindle motor power: 5,500 W Max. spindle speed: 12,000 rpm Spindle bore: 20 mm Bar capacity: 20 mm MACHINE DETAILS Podpfoyzhlqex Ac Aegt Control: Fanuc 31i-B Number of axes: 9 Spindles: 2 Supply voltage: 400 V Dimensions & Weight Footprint: 2,000 x 1,280 mm Machine height: 1,720 mm Machine weight: 3,600 kg Operating hours Power-on hours: 32,700 h Spindle hours: 3,370 h EQUIPMENT Interfaces: Ethernet / RS232 / USB / PCMCIA Chip conveyor 3-color signal lamp Rotary cannon Workpiece picker Workpiece ejector Coolant tank Bar feeder: Iemca Elite 220 (2010) Fire protection system High-pressure unit 70 bar Muller Oil cooling unit Circuit diagram Maintenance documentation Operating manual

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: diesel, color: blue, operation weight: 3,375 kg, Year of construction: 2025, New RIPPA R 32 Pro mini excavator, Japanese Kubota engine, 4 cylinders, 18.5 kw, Euro 5 emission, Tier 4 Stage V, picker installation, air conditioning, mansalier camera, year of manufacture 2025, quick coupler, 1000 mm slope bucket, warranty. Pgjdpfx Aowlvzujc Ast

Condition: used, machine/vehicle number: 11552, Rotor diameter: 2 x 150 mm (duplex rotor) Rotor width: 200 mm Psdpfx Aeyr Tlcec Ajgt 2 x 12 rotor blades 2 + 1 stator blade Inlet cross-section approx. 350 x 200 mm Drive motor 15 kW The counter-rotating cutting rotors of the SM Duplex ensure good feeding performance for bulky, thin-walled parts and lightweight hollow bodies. The granulator can be used as a central granulator or as a stand-alone granulator on an injection molding or blow molding machine. This makes it suitable for shredding sprues or rejects that arise, among other things, during machine start-up.

Condition: used, Year of construction: 2014, 2x ABB FlexPicker robot IRB360 M2004 - Year 2014 The two robots must be removed from the system yourself! We have a total of 10 ABB FlexPicker robots available. Further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested sample photos sample pictures Pgjdpfxetzxbgo Ac Ajt A viewing in Rietberg is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material and legal defects! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: used, Injection molding cutting device for injection molding machine, injection molding machine, cutting pliers -Cutting device: for cutting plastic sprues, tabs, overflow cavities, webs, etc. -6 Cutting pliers: Cutting insert/individual components see photos -Price: complete -Total dimensions 1570/770/H680 mm -Weight: 49 kg Pgedjtrbacopfx Ac Ajt

Condition: good (used), Working platform, scissor lift, aerial work platform, cherry picker, lifting platform, scissor lift, scissor lift, drive axle aerial work platform, travel drive, drive axle -Manufacturer: GSL, travel drive axles left and right from aerial work platform -Type: KM 400 and HM 400 -Bolt circle: Ø 145 mm M14 -Dimensions: see photos -Delivery/price: complete -Dimensions: 630/370/H510 mm respectively -Weight: 52 kg/pc. Pgodpfjizugvsx Ac Aet