Used Spraying Head Wollin for sale (11,470)

Year of construction: 2005, condition: used, Chamber spray cleaning system Basket usable dimensions, loading basket: L x W x H 842 x 659 x 512 mm Maximum loading weight: 100 kg; loading unit in front of the system included 2-tank design: Cleaning (1,200 liters) Rinsing (1,200 liters) System with electric heating - Cleaning process: Spraying Tsdpfez E I Syox Akied - Basket remains stationary, swings, or rotates during the cleaning, rinsing, and drying process (freely selectable in the program) - Vacuum drying - Full filtration of the cleaning solution (Tank 1), 2x bag filters, filter fineness freely selectable - Automatic water refill for each tank - Coalescence oil separator External dimensions: 4,300 x 4,360 x 4,020 mm System weight: 5 tons Connection power: 110 kVA Fuse: 250A Control: Siemens S7 The system is fully functional, but with the limitation that operation via the panel is only partially functional. This is a consignment sale; the system must be dismantled and collected on-site by the buyer.

Condition: used, inner taper of milling spindel / Todpfx Ajzcq Hrjkijd collet diameter / turning speed range / U/min

Condition: used, inner taper of milling spindel / collet diameter / Tsdpfx Akszcq H Eoiod turning speed range / U/min

Condition: refurbished (used), Fortress Stealth Metal Detector Tedjy N Srdjpfx Akijd One head for ferrous in foils detection 2nd head for standard ferrous and non ferrous detection Reject by air ram into lockable bin Head aperture 150 mm high x 350 mm wide Supplied in good working order

Condition: reconditioned (used), functionality: fully functional, pressure: 180 bar, input voltage: 400 V, overall weight: 130 kg, temperature: 155 °C, Kärcher HDS Super M Eco Hot Water Pressure Washer New Pump Head The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head featuring new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features unique, actual photos; you are buying the exact machine shown. Technical Data: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temp. [°C]: 90/155 Connected load [kW]: 6.4 Detergent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW pump head NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding Todez D D Axspfx Akiod NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: used, Technical data: - Blade: Z2 - Cutting diameter (ø): 120 mm - Bore: 35 mm Tsdozrx Unspfx Akisd - Length: 80 mm

Condition: like new (used), Planer heads for the professional, machine-based machining of solid timber, wood-based materials and other suitable materials. Technical data: - Cutter: Centrolock Z2 reversible cutter - Cutting circle (ø): 93 / 130 mm - Mounting: PowerLock HSK 85 - Length: 240 / 255 mm Tsdpfx Akozrx U Isijd - Material: Steel - Condition: As new

Condition: used, Planer heads for the professional, machine-based machining of solid timber, wood-based materials and other suitable materials. Technical data: - Blade: PM Z2 with deflector - Flying diameter (ø): 110 mm - Bore: 30 mm - Width: 65 mm Tedpfjzryafex Akiod - Marking: MAN - Material: Steel

Condition: used, Planer heads for the professional, machine-based processing of solid wood, wood-based materials and other suitable materials. Technical data: - Cutter: Centrolock reversible cutter Z2 - Cutting diameter (ø): 93 mm - Mounting: PowerLock HSK Tedpozryaxjfx Akied - Length: 150 mm - Material: Steel

Condition: used, Technical data: - Blade: WM Z4 - Flight circle (ø): 125 mm - Bore: 40 mm - Length: 75 mm Tjdpfxjzryfue Akied - Material: steel

Condition: used, Planer heads for the professional, machine-based machining of solid timber, wood-based materials and other suitable materials. Tsdpfx Akszrylboiod Technical data: - Blade: Z2 strip planer blade - Cutting circle (ø): 130 mm - Bore: 50 mm - Length: 50 mm - Material: Steel

Condition: used, Year of construction: 2017, machine/vehicle number: O3pl, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 230 V, input frequency: 60 Hz, type of input current: AC, rip fence adjustment: manual, actuation type: pneumatic, rotational speed (max.): 12,000 rpm, rotational speed (min.): 12,000 rpm, table width: 330 mm, table length: 2,400 mm, total length: 2,600 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 540 kg, PEMAC 03PL 3-head copy milling machine – Year of manufacture 2017 – Ready for immediate use Very well-maintained PEMAC 03PL copy milling machine for aluminum profiles, manufactured in 2017. The machine has always been used in a commercial setting, has been well-maintained, and is in fully working condition. Inspection and test runs are possible. Specifications Year of manufacture: 2017 230V (1-phase) 3 milling heads Spindle speed: 12,000 rpm Working pressure: 6–7 bar Weight: approx. 540 kg Included 35 used and new milling cutters Video of the machine in operation available Tsdpfx Akozlar Ueiod Optionally available: Tekna TK280 punching machine (2012) Compressor Asking price: €6,500. Serious offers will be considered.

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax Kelch, face milling cutter head diameter 270 mm -Recording: Chalice 178 03 M Ø60 SK50 -Cutter head: Widia type WIDAX M45 D.250 R 13 -Number of teeth: 13 -Recording: SK50 -Dimensions: Ø 270 x 235 mm Tsdpozqywzofx Akiod -Weight: 30.9 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: UER 200-1-12 -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm Tjdpfx Akozqyw Ieisd -Dimensions: Ø 200 x 62 mm -Weight: 8.7 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax, face milling cutter head diameter 315 mm -Cutter head: Widia type WIDAX M45 Ø 315 R 16 Tedpfxozqzqco Akijd -Number of teeth: 16 -Hole: Ø 60 mm -Dimensions: Ø 335 x 78 mm -Weight: 38.5 kg

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss surfaces. It is currently still fully assembled and installed. This allows interested parties to inspect the existing scope of the system and the installation situation before dismantling and to document it for a later reconstruction. Technical data and equipment: • Large-area, filtered supply air ceiling panel, approx. 8,100 × 4,500 mm Tsdpfx Ajz Ikyrekijd • Filter ceiling divided into two areas across its width • Large-area floor extraction system, approx. 8,100 × 3,650 mm, with grating • Supply air treatment, approx. 24,500 m³/h • Exhaust air treatment, approx. 24,000 m³/h • Supply and exhaust air fans / air treatment • Existing heating / hot water system with pumps and fittings • Air ducts and existing piping • Electrical system control / control cabinet • Cabin lighting • Sale includes the system in its current, on-site configuration Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. Previous use included high-quality surface work up to and including high-gloss coatings. An inspection of the still-assembled system is highly recommended. Sales and dismantling conditions: Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer must organize the necessary specialist personnel as well as lifting, dismantling, and transport equipment. The complete dismantling and removal must be completed no later than July 31, 2027. Note: Technical specifications have been compiled based on available documentation, nameplates, and the current condition of the system. Specifications are without guarantee. The condition and scope determined during inspection shall be binding. Selling price: 19,500.00 EUR Price is net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: good (used), functionality: fully functional, 4 x Wagner ZA 16 1 x Wagner MSD 20 19 mm shank, suitable for, e.g., Revolver Traub TD or Index A 25. List of thread inserts: M 0.8: 2 sets M 1.0: 7 sets M 1.25: 20 sets + 1 set on a Wagner head Tedpez H H A Tefx Akied M 1.5: 7 sets + 2 sets on a Wagner head M 1.75: 5 sets In total, 44 sets of thread inserts. See also the photos. The heads can be inspected at our warehouse.

Condition: ready for operation (used), D'Andrea T100 Planing and Turning Head for Fehlmann SF32 Head diameter: 102mm Radial adjustment of the tool slide: 30mm Max. planing diameter: 200mm Max. speed: 1500 rpm Accuracy: 0.005 mm Net weight: 4.6 kg Tool holder: SF 32 Fehlmann You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Tsdpfx Akez H Iz Djijd Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: new, power: 316 kW (429.64 HP), first registration: 01/2025, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 770 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: steel-air, total length: 6,260 mm, total width: 2,500 mm, total height: 3,880 mm, Year of construction: 2025, Equipment: air conditioning, fridge, = Additional Options and Accessories = - Air suspension - Sleeper cab - Sun visor Tedpfx Akjzqdudeied = Notes = Fuel tank: 770 liters, with step Air conditioning Cab air suspension Refrigerator Radio with Bluetooth and DAB = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,882 cc Transmission Transmission: TX-12M, automatic Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Front axle: Steered; Suspension: Leaf spring suspension Rear axle: Suspension: Air suspension Weights Unladen weight: 7,040 kg Payload: 12,960 kg GVW: 20,000 kg

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Tedpfxeznn Hro Akiod Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: used, Year of construction: 2008, functionality: fully functional, Single-head welding machine Tjdozpyfcspfx Akisd

Condition: used, Year of construction: 2008, - Producer Elmag Superfici - Type Magnum 3.2.2 - Year of construction 2008 (2010) - Working width 1.350 mm - Working height 900 mm + - 20 mm - Operating side, right - Actual condition, machine is not overhauled - Duo gun drive system - Spraying gun carrier independently controllable - Dry filter system - Exhaust air 13.500 m³/h - Transport belttransport System - Feed speed adjustable bis 18 m/min - 2 belt cleaning units - Belt cleaning system with roller - Belt cleaning system, behind the machine - Lacquer reclaiming system with v-belt - Gun control system - PLC control with touch screen - Number of installed lacquer circles 2 Stk. - Supply air box - Length ~ 6.680 mm Tsdpjzf N Dtofx Akiod - Width 4.455 mm - Total connection power ~ 26.3 KW - Voltage / HZ 400 / 50 - Location, not on stock - Voltage fluctuation max. +/- 5 %

Condition: used, Year of construction: 2001, - Manufacturer Elmag Superfici - Type. TWIN SPRAY - Year of manufacture 2001 - Working width 1,300 mm - Working height 890 mm + - 20 mm - Operating side right - Price for overhauled machine - Gun drive in duo version - Dry extraction - Exhaust air output 8,000 m³/h - Belt transport system - Belt cleaning via roller cleaning system - With belt cleaning system - Belt cleaning, behind the machine, in the direction of travel, - With paint recovery - Gun control - Number of installed spray guns 4 pcs. - Spray guns type. Kremlin ATX - Airmix spray system - Supply air filter ceiling - Length 5,950 mm - Width 3,980 mm - Height 2,790 mm - Total connection 21 KW, 40 A - Volt, Hz 400 / 50 - Location, in stock _____ Tsdezf N Eqepfx Akied Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Year of construction: 2023, condition: like new (used), HHS cold glue applicator with 4 heads KFE-E-KP6-MEP 4x HD hose PTF-1/4″ Tedszzar Hjpfx Akiod + one spare head Complete unit, new price: €17,000 The unit has only been used once and is otherwise in new condition.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, We are offering this ready-to-use Cask 3 Head Fill Station filling technology, manufactured in 2023. Number of filling heads: 3 Filling capacity: 25 cans/minute Tjdpozzmfajfx Akied Hourly capacity: 63 cases/hour Dissolved oxygen level: 15 - 20 ppb Footprint dimensions: 7’ x 2.5’ Footprint area: 17.5 ft² If you have any questions or would like more information, please feel free to send us a message or call us.