Used Spray Booth for sale (2,489)

Condition: good (used), Köhler Type: HKS 1500 The Köhler HKS 1500 salt spray chamber is an industrial testing device designed for corrosion testing according to international standards such as ISO 9227 (NSS, AASS, CASS). It is primarily used in the automotive and metalworking industries to test the resistance of materials and coatings to corrosive environments. Technical Features Model: Köhler HKS 1500 Test Volume: Approx. 1000 liters Chamber Type: Front- or Top-Loading Control: Touch panel for easy operation Temperature Range: Room temperature to approx. 50 °C Materials: Corrosion-resistant interior lining, e.g. B. Polypropylene Standards: DIN EN ISO 9227, VDA 233-102, DIN EN ISO 11997-3 This chamber enables both conventional salt spray tests and cyclic corrosion tests and can be individually adapted to specific testing requirements. Technical specifications for the salt spray cabinet: Test chamber material: Polypropylene RT - + 55°C Test chamber temperature range/salt spraying Heating/salt spraying indirectly via chamber walls Temperature range - condensate RT - + 50°C Temperature range - humidifier RT - + 75°C Heating indirectly via the test chamber walls. Temperature stability +/- 1.0 K Digital temperature control, resolution 0.1 °C (on plain text display) Digital control, heating circuit via electronic relay without power disturbances Saline supply: approx. 200 hours of continuous spraying or external Saline supply: automatic humidifier filling Fog generation: dual-fluid nozzle made of acrylic glass Air flow rate: 3.0 m³/h Precipitation rate controlled by electronic dosing pump Dimensions: Inside: Width 1030 mm, Depth 880 mm, Height 1100 mm Outside: Width 1200 mm, Depth 1000 mm, Height 2080 mm Electrical connection: Nominal voltage: 400V 3P/N 50Hz Pmax: 9800W Connected load: 3.0 KVA (salt spraying) (condensation) 2.0 KVA Compressed air connection Min. 4.5 bar, max. 8.0 bar Water connection (deionized water): Min. 2.0 bar, max. 6.0 bar Disposal: Mist outlet NW 32, Condensate outlet NW 32 Weight: 450 kg Condition: Used Scope of delivery: (See image) Gedpfx Adjwit Eremstt (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2015, Used Buchi model B-290 glass mini spray dryer. Unit rated 1 kg/hour water evaporation capacity at 220°C maximum air inlet temperature. Heating capacity is 2300 W. Drying tower has inner diameter approximately 150 mm x 485 mm height of straight side. Includes nozzle, seperation flask, cyclone, filter. Gtjdpfex R Taljx Admet

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 59 226 035 580 030, Type: SC/KWT 450 Salt Spray Chamber Technical Data: - Test chamber volume: 450 liters - System weight: 140 kg (test chamber + machine unit; without brine and without test specimens) - Brine reservoir: 180 liters - Maximum load: 100 kg, 8 kg per support rod Gtodex Ig Tmspfx Admjt - External dimensions: Height without hood 920 mm, height with hood 1370 mm, width 1930 mm, depth 800 mm - Test chamber dimensions: Height 740 mm, width 850 mm, depth 570 mm - Control unit: Simcon/32 - Condition: used - Operating hours: 22,914 h Connection Data: - Voltage: 1/N/PE AC 230V ±10% 50Hz - Rated power: 2.0 kW - Rated current: 8.5 A - Power consumption: 450 Wh/h - Brine consumption: approx. 0.5–1 liter per hour - Compressed air consumption: approx. 1.5 m3/h at 0°C and 1 bar - Deionized water consumption: approx. 0.4 liters per hour Application Areas: - Salt spray test in accordance with DIN 50021 - Condensation water test in accordance with DIN 50017 - Standard climate (ventilation): DIN 50014 The system has been serviced and calibrated annually by the manufacturer, with no outstanding repairs (full maintenance contract). Last maintenance/calibration/DGUV3 inspection: 03/2025. The system will remain connected until week 3 and can be inspected during this time. All installation and operating manuals as well as the service manual are available.

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM Gsdpfxjhby Rie Admstt capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Gtsdpfskwct Uox Admot Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ► Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can develop its full potential, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – be it oil, dirt, or oxide – is reliably removed. This is the only way to achieve lasting corrosion resistance and excellent paint adhesion. Each product requires a customized process. Whether alkaline or acid degreasing, iron or zinc phosphating, nanotechnology, or chrome-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️ Maximum energy efficiency ✳️ Minimized chemical and water consumption ✳️ Precise process control with automatic dosing and pH monitoring ✳️ Durable construction made of chemical-resistant stainless steel or plastic Our promise: Customized technology for the highest demands Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We consider all crucial parameters – from heating power and water circulation to vapor deposition and chemical separation. The spray wash lines are seamlessly integrated into your conveyor system. All cleaning, rinsing, and drying processes are fully automated and efficient – ready for a perfect coating. Available systems: ✳️ Spray and dip pretreatment lines ✳️ Nanotechnology systems (e.g., Bonderite, Oxsilan) ✳️ Degreasing and pickling systems ✳️ Iron and zinc phosphating lines ✳️ Chromating and chrome-free systems PROTON – Technology that convinces. Experience that works. ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: ready for operation (used), Year of construction: 2018, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: A1406010, feed length X-axis: 1,800 mm, feed length Y-axis: 350 mm, feed length Z-axis: 150 mm, feed rate X-axis: 40 m/min, workpiece weight (max.): 8 kg, working width: 200 mm, volume flow: 16,000 m³/h, control cabinet length: 3,200 mm, control cabinet width: 600 mm, type of input current: three-phase, control cabinet height: 2,200 mm, total height: 3,600 mm, total length: 21,000 mm, total width: 14,000 mm, Complete lacquering line for narrow elements. Magazine infeeder / brushing machine left; right; top / lacquering cabin / drying tunnel hot air; cold air; UV lamps / outfeeder. Line speed 40 m/min Production speed 25 m/min Spraying thickness 110 g/m² Waterborne lacquer Power 200 kW Gsdpfxex Nhawo Admett

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (ΒχΤχΗ1/Η2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions втн: 2162 x 995 x 2080 mm Operating temperature range: 5°C > room temperature to +80°C High-load version for loads up to 350 kg Gedpfx Adet Igc Sjmett Process control: Beckhoff PLC, color touch screen display display, 50 memory locations for test procedures, 50 Memory locations for test segments, ramps: Humidity-temperature over the entire working range, Ether connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar Tap connection 3/4" External thread for connecting an ion exchanger cartridge Compressed air: 7-8 bar Waste water: Siphon / 30 mm ID hose nozzle Exhaust air: pipe end OD 75 mm Operating systems: Salt spray Condensation water (CWC) Ventilation Room air Warm air Controlled humidity

Condition: like new (used), Year of construction: 2016, Cleaning system type W 60 C Machine body, internal pipe system, switch cabinet and washing basket in stainless steel Combination machine - turntable system with removable turning device and small parts basket - Basket diameter turntable wash basket 600 mm - Usable interior height 370 mm - Basket load rotary plate wash basket 100 kg - Usable interior height 530 mm - Dimensions of small parts basket 375 x 220 x 200 mm Mesh size 12 mm - Basket load small parts basket 20 kg Complete stainless steel design Pump(s) and external piping/fittings Version for operation with Liquids with a density of 1.3 due to reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO flushing (loss of sink) for minimum water consumption Water supply from the operator's mains supply with hot water supply on the machine side Hot air drying 1 x 4 KW Oil skimmer Gtsdpfx Adsq Ewgksmst Pumping device/floor flushing with pump and pipe system in stainless steel

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, SPX Flow Spraydrier - we have been using it for drying fresh water algae into powder. The machine is fully functional and working well. Gtsdpfx Adoxv A I Hjmjt

Condition: new, Year of construction: 2020, Model KPZ-2 Type Closed Gtjdpeb Al Sbefx Admet Working dimensions 900 w. x 1300 h. x 900 d. External dimensions 980 w. x 2100 h. x 1600 d. Operation Electric Power 0,69 kW x 2 Voltage 380 V Frequency 50-60 Hz Filter Polyester Number of filters 3 Filter surface 22,5 m² Fan aluminium Fan 74 dBa Air consumption 10,200m ³/h Warranty 12 months Other models KPZ-4 / 6 / 8 / ... on request

Condition: new, total height: 3,500 mm, total length: 7,000 mm, total width: 4,000 mm, volume flow: 26,000 m³/h, warranty duration: 12 months, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, working height: 2,700 mm, Equipment: cabin, documentation/manual, ⭐⭐⭐⭐⭐ (5.0) Customer Rating – Quality that impresses! ⚡ Top Service – Fast Delivery – Reliable Support ⚡ ✈️ Plus shipping costs – Shipping available upon request ⏰ 48H EXPRESS DELIVERY available after a deposit! Regular delivery time varies between 1 business day and approximately 15 weeks depending on stock. 🔧 Please note: Additional options may extend delivery time. Gsdjipvulspfx Admjtt 📩 Ask the seller in advance whether your selected options are immediately available. 🛒 ►►► Buy now! ◄◄◄ 💸 Preserve liquidity – invest wisely! ✳️ We offer flexible financing options: ✔️ Hire Purchase ✔️ Leasing ✔️ Warranty Programs 📞 Contact us – we'll find the right solution for your budget! ✨ Powerful. Economical. Efficient. ✨ 📦 Immediately available in three standard sizes! 📌 Our three standard booth sizes are usually in stock and available for short-term delivery. 📌 If larger painting areas are required, we can combine standard booths modularly to create customized solutions – tailored to your space and process requirements! 🎨 PROTON WETLINE KKF-40-70-35 Top-of-the-line wet paint booth & drying system 📐 Technical specifications (inside / outside): Length: 6900 mm / 7000 mm Width: 3900 mm / 4000 mm Height: 2700 mm / 3500 mm Air treatment box: 1350 x 2900 mm 🔧 Features: 🌬️ Vertical airflow via full-surface ceiling supply air plenum – for even, dust-free painting 🚪 3-wing main door with viewing windows + service door with emergency locking in case of overpressure 💡 Shadow-free lighting, heat-resistant and compliant with standards ♻️ Recirculation system with controllable fresh air flap – rapid heating to 60–80°C 8–15 min 🔇 Low-noise, high-performance fans with constant airflow (0.30 m/s) 🛡️ Slight overpressure reliably protects against dust ingress 🔥 Heating system & efficiency: Riello G20 burner Heating output: approx. 200,000 kcal/h Efficiency: up to 99% High-temperature heat exchanger made of special steel 🧼 Top-of-the-line filter technology: ✅ Pre-filter (tear-resistant, up to 100°C, DIN 53438-3 F1) ✅ Ceiling filter (EN 779: F5, polyester-coated) ✅ Floor filter (Paint Stop, G3, silicone-free) ✅ Activated carbon filter (DIN 24184, class G4) 🖥️ Intelligent control: Modern control panel for full control of ventilation, heating, lighting, and Safety – simple & compliant with standards 🖲️ Optionally available with touchscreen operation 🧱 Flexibly positioned air treatment units – can be mounted on the right, left, or rear of the cabin ➕ Optional equipment (for an additional charge): 🪟 Panoramic doors – fully glazed 🧱 Roof with additional insulation 🎨 Paint mixing station can be integrated 🌈 Color selection: Any RAL color possible (standard: blue, white, orange, red, gray) 💡 Explosion-proof lighting (Exproof) 🌪️ Explosion-proof fan (Exproof Fan) 🖥️ Touchscreen control ⚠️ Selecting optional equipment may extend delivery times. Please discuss your options with our sales team in advance. 🚧 Installation costs not included in the price. 📍 These depend on your location – we would be happy to provide you with a customized quote! ☀️ 2-YEAR WARRANTY – Better safe than sorry! ☀️ ⭐ Follow us for new offers & promotions! ⭐ PROTON Maschinenbau GmbH – Your partner for professional painting technology with over 40 years of experience.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. Gjdjfr T Emspfx Admott TSWi 30.20 Dry splash wall Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Gedpfxjxg Hrks Admstt Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Year of construction: 2014, condition: ready for operation (used), A Büchi laboratory spray dryer is available. Evaporation capacity: 1l/h, heating power: 2300W, max. inlet temperature: 220°C, air flow rate: 35m³/h, spray gas flow rate: 200l-800l/h, pressure: 5bar-8bar. Machine dimensions X/Y/Z: approx. 650mm/700mm/1100mm, weight: approx. 50kg. Documentation available. An on-site inspection is possible. Gtjdpfxsxvrucj Admet

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm Gtedpfx Adeu Afu Romjt - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ 12-Weeks delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEAR WARRANTY ☀️ MULTI-TREAT SPRAY PRE TREATMENT MACHINE ✅Multi-Treat spray pre-treatment machine is used for surface treatment of materials to be painted. It provides the possibility of working up to 8 different chemicals with tanks in varying numbers according to the process. All tanks are made of 316 SS and isolated. According to the process steps, the number of tanks and how many tanks are heated are determined. ✅The heating inside the tank is provided by gas heat exchangers. The processes can be monitored, times and temperatures of all processes can be adjusted via the Plc touchscreen. ✅Any failures that may occur in the system can be observed from the electrical panel. ✅Automatic floats in tanks, stop the system automatically when there is not enough water or chemicals in the tanks and the amount of liquid is automatically supplied by transferring between the tanks and the system stays safe. ✅Under all tanks there is leakage pool. Leakage pool has made from 316 SS. Tanks are made of 316 Quality 2 mm Stainless Steel. The material is passed through penetration tests made of argon welded and sealed. The grids inside the tank prevent mud access to the pumps. ✅The cabin interior consists of sandwich panels 304 stainless steel and the exterior is made of powder coated sheetiron. ✅Panel thickness is 80mm. It comes from polyurethane filled stainless steel panels. PPT ring pipes and nozzles provide long life usage. Gtodpfx Aofggcwodmjt ✅Thanks to the steam suction fan, vapor diffusion into the working area from the system is prevented. The washing machine doors are container type and they are sealed with silicone gaskets. ✅The movable washing platform in the cabin moves back and forth through the cabin to wash the materials. The hoses are carried by the mobile carrier system. There are separate pumps for every processes and 1 waste pump for discharging liquids from the tanks. Discharging pump will be connected to chemical discharging tank. ✅The machine floor is designed to be inclined towards the pool discharge area. ✅There are manual application liquid spray guns for every processes for manual usage. System has manual mode for pretreatment. Dripping time and process time can adjusted from the PLC panel and dripping time is valid for manual application.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Gjdpfx Asfr T Eqjdmjtt Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: used, Year of construction: 2005, machine/vehicle number: A0407004, - Producer Venjakob - Type. VEN SPRAY DUO/C CNC 6000 - year of construction 2005 - Working width 1300 mm - Operating side right - Price for overhauled machine - Actual condition, machine not overhauled - Pistol drive in duo version - Dry extraction system Gtedpfxeumvu Ue Admjt - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2 - 7.5 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen CNC- Installed colour circles 2 pcs. - Quick-change system for spray guns - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated in machine - Total connection ~ 29 - Volt, Hz 400 / 50 - Colour RAL 7035- Location, in stock - Voltage fluctuations max. +/- 5 % Picture shows an example of a reconditioned automatic machine _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. Godpsfv Hiqefx Admett TSE 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is installed above the wall + Fan in the height Air capacity: 7,200 m³ / h Motor: 0.75 kW explosion-proof (ATEX) Exhaust air pipe: 500 Ø mm depth: 900 mm The pipeline should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: used, Year of construction: 2005, - Manufacturer Venjakob Gsdpfsvun Dusx Admstt - Roller transport system - Roller spacing 85 mm - Roller diameter 60 mm - Rollers rubberized - Length 1,000 mm - Width 2,000 mm - without drive - Color RAL 400 / 50 - Location, in stock

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Godpjfn Ndcofx Admjtt Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: used, Year of construction: 2017, machine/vehicle number: A1711012, Pos.1 VEN CLEAN Smart dedusting systemCompressed air dedusting for cleaning the workpieces to be painted from dust on profiled workpiece surfaces. Five rotating blowing stars are installed. These remove the dust from the surface. The loosened dust is extracted on both sides by suction shafts. on both sides. An external extraction system is required on site. Technical data: Roller transport length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h To be provided by the customer Compressed air consumption: 980 Nl/min. Ionisation as nozzle bar, not EX) with compressed air nozzles, Compressed air consumption 840LN/min. Pos. 2 Automatic spray gun VEN SPRAY Comfort- Manufacturer Venjakob Godsvv Hryspfx Admjtt - Type. VEN SPRAY Comfort CNC 7000 - Year of construction 2017 - Working height approx. 930mm+-20mm - Working width 1300 mm - Operating side left - Price for overhauled machine - Actual condition, machine not overhauled - Gun drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 7,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2-6 m/min - With belt cleaning system with doctor blade in tungsten carbide design - Gun control, touch screen CNC7000 - Installed colour circles 1 pc. (optionally more possible) - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet, free-standing - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, in stock Voltage fluctuations max. +/- 5 %

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Gtsdsfn Nddopfx Admst Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: used, Year of construction: 2018, Technical data: Pos.1 - Dedusting VEN CLEAN Smart - Working width: 1,300mm - Length: 1,060mm - Roller transport: 1,000mm - Extraction fan 4,000m/h - Compressed air 980Nl/min. - Deduster Air nozzles - With ionisation Pos.2 - Automatic spray gun VEN SPRAY PERFECT - Year of construction 2018 - Working width: 1,300 mm - Working height: 940 mm +-20 mm - Part detection via light curtain - CNC 7000 control unit - Operating side right - Gun drive in Duo version Z16 - Dry extraction with filter Godpfx Adevvbqqemstt - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - External filter box, LxDxH: 3500x1280x2740mm - Paint recovery system via V-belt - Infinitely variable feed speed 2 - 6m/min - Installed spray circuits 2 pcs. - Gun arm quick-change system, 1pc. - Number of spray guns installed 4 pcs. - Number of material pumps 1pc. - Supply air filter cover G5 - Length ~ 6,590 mm - Width 3,666 mm (+1152mm) - Height 2.500mm - Total connection 21 KW - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, from 01/2025 in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2001, machine/vehicle number: 5358, - Manufacturer Elmag Superfici - Type. TWIN SPRAY - Year of manufacture 2001 - Working width 1,300 mm Gedpjumvk Aofx Admjtt - Working height 890 mm + - 20 mm - Operating side right - Price for overhauled machine - Gun drive in duo version - Dry extraction - Exhaust air output 8,000 m³/h - Belt transport system - Belt cleaning via roller cleaning system - With belt cleaning system - Belt cleaning, behind the machine, in the direction of travel, - With paint recovery - Gun control - Number of installed spray guns 4 pcs. - Spray guns type. Kremlin ATX - Airmix spray system - Supply air filter ceiling - Length 5,950 mm - Width 3,980 mm - Height 2,790 mm - Total connection 21 KW, 40 A - Volt, Hz 400 / 50 - Location, in stock _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!