Used Spotting for sale (1,804)

Year of construction: 1990, condition: ready for operation (used), A Reis spotting press for tool and mold making is available. Pressing force: 1000kN, clamping area: 1200mm/1500mm, installation height: 1575mm, max. mold weight: 10000kg, max. tilting plate load: 4000kg, ram stroke: 1450mm, return force: 400kN, hydraulic pressure: 190bar, pneumatic pressure: 5bar. Machine dimensions X/Y/Z: approx. 3200mm/4500mm/4100mm. Documentation available. On-site inspection possible. Cgedpfx Aoxt Rl Iofnen

Condition: excellent (used), Year of construction: 2022, clearance between the columns: 2,130 mm, overall weight: 56,000 kg, retraction force: 55 t, clamping force: 2,000 kN, MIL263 straight version for floor installation few operating hours Siemens S7-1500 / Multipanel TP1200 diagnostic system 2 pcs. Sitema safety catch lower pull-out table; upper machine table tiltable by 180 degrees Cgedpfx Afewu Upisnen rotary table with 5 positions electronic parallelism control separate hydraulic unit on trolley for core pulls 4+4, standard version pump 8 liters/min, 2.2 kW

Year of construction: 2015, condition: like new (used), Servo-motorised 3G-X-forceps / modular welding gun for robots Cgodpfx Aed Eaz Tofnon was mounted on KUKA robots - the adaptation to such is included Electrode force max. 6kN at 500mm radius X-tongs for Cu-arms with diameter 54mm MF transformer 560V / 1kHz, 56kVA Ratio 1:70 - U20, 7.2V with measuring coil 150 mV / kA and thermal switch Servomotor 8-pole 300V - 20kN maximum power Working stroke 95mm + 10mm reserve PDIV display Resolver 8-pin Spindle pitch 5mm Electrode arm for 3G pliers, projection approx. 400mm with brake (24VDC 1A) as required for KUKA robot Long 90 ° L console complete tube package including control and cooling tubes enclosed

Condition: good (used), Year of construction: 1986, Power: 400kN Size of bolster: 900 x 1.280 mm Size of ram: 900 x 1.2200 mm Weight of mold: max. 7.000kg Power main motor: 7,5 kW Stroke: 1.000 mm - With movable bolster Cgodpfx Aothdbnefnon - Bolster can be swiveled Weight: app. 7.000kg

Condition: used, Year of construction: 1995, pressure 80 t table length 1.200 mm table width 1.000 mm 250 mm 1.200 mm max. table load 7.000 kg distance between columns 1.100 mm voltage 400 V weight of the machine ca. 11,0 t dimensions of the machine ca. 4,40 x 2,58 x 3,66 m - Serial No.: 760/12312 Dimensions of upper and lower plate: 1.200×1.000 mm. Press upper plate is tilting by 150° Lower plate tilting by ±70° at front/back side The press is equipped with: - 2 energy accumulators in order to better gauge the adjustment of the mould halves - an automatic wax injection unit to check Cgodpfjvbwitox Afnen quality of pre-production mouldings - hydraulic ejection unit on lower plate

Year of construction: 1970, condition: used, Spot welding machine Make Dalex Cgodpfx Aek Tt Hfjfnjn type SF 16 Continuous power 16 KVA at 50 % ED

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Table size 2600*1800mm Codpfx Ajrl Irksfnjgn maximum daylight 2200 mm clamping force 300T table size 2600*1800mm max day light 2200mm clamping force 300T

Condition: used, Cooling unit Water recooling unit DALEX type DRF 2 Machine no. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Cooling capacity 1950 Watt Operating pressure 2 to 3 bar Cgodpfx Asg D H Rusfnon Refrigerant R 134a Unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volt, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Cgjdev Dxm Sspfx Afnsn Weight 900 kg good condition

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Cjdpopy Uzyofx Afnjgn Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Cgjdpfx Ajhpf Iyofnsn Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, projection welding machines, seam welding machines ELREX type 3x ET70.0.G Serial No. Year of manufacture approx. 1990 Consisting of three water-cooled transformers with water-cooled rectifier block Performance data: Total power at 50% duty cycle: 210 kVA Secondary voltage: 7 - 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Primary connection: 380 volts, 50 Hz (three-phase) Consisting of three transformers – single transformer data: Power at 50% duty cycle: 70 kVA Secondary voltage: 7 - 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 6.7 kA Primary connection: 380 volts, 50 Hz (two-phase) Cooling water requirement per transformer: 4 liters/min. Insulation class: F - Water-cooled transformer - Water-cooled rectifier block mounted on the secondary side - Direct current power output connection via contact surfaces 50x50 mm, thread M20x1.5 mm - Temperature monitoring at each rectifier element and each transformer coil - Connection cable: 7 cores, cross-section 50 mm², approx. 6 m long Overall dimensions (W x H x D): 700 x 710 x 440 mm Total weight: 480 kg In good condition Cgedpodzp Txsfx Afnen

Condition: used, Spot welding machine DALEX type SL 16 EA Machine No. 68611900-5 Year of manufacture: 1986 Rated power at 50% duty cycle: 16 kVA Maximum welding power: 50 kVA Throat depth: max. 500 mm Electrode force: max. 17 - 278 daN Electrode arm diameter: Ø 45 mm Electrode holder diameter: Ø 25 mm Arm spacing: 140 mm / 280 mm Codpowwaz Njfx Afnsgn Power switch: 8 stages Control: 4 times with single and series spots Operating pressure: 1-6 bar Open circuit voltage: 1.8 to 3.6 volts Connected load: 37 kVA Electrical connection: 400 Volt, 50 Hz - Welding cycle initiated via electric foot switch - Welding time infinitely adjustable - Water-cooled Space required (L x W x H): 1100 x 600 x 1200 mm Weight: 200 kg Good condition

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine Csdpfx Afjguvtdenjgn The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Year of manufacture 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Masch. No. 352 / 92 Year of construction 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Csdpjguvtaofx Afnsgn Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Cedpfodzp Tcsx Afnogn Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Spot projection welding machine NIMAK type PMP 5 / 35 Spot welding machine, projection welding machine Make No. 88100 Year of construction approx. 1988 power at 50% ED 35 kVA throat 250 - 450 mm working stroke 40 mm electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of electrode holder 200 mm Connected load 83 KVA Mains connection 380 Volt, 50 Hz - 4-time control - stepless power adjustment - single points and series points Cgjdpfx Afjhubgzjnen - bouncing electrode guide - water cooled (without cooling unit) - electrical foot switch space requirement L x W x H 1200 x 650 x 1500 mm weight 300 kg good condition

Condition: good (used), Year of construction: 1988, machine/vehicle number: 03105, clearance between the columns: 1,300 mm, table width: 1,200 mm, table length: 1,500 mm, Weight: approx. 16,000 kg, table size: approx. 1500x1200 mm, distance between top plate and bottom plate max is 1550mm, with sliding table and separate control/operating panel Cgedpfx Aetdnnmsfnsn

Year of construction: 2022, condition: new, Pressure: 400 t table length: 3000 mm Cgjdpfx Ajfn Efpsfnen table width: 2000 mm table load max .: 50 t distance between the work tables : min. 400 / max. 2800 mm top tool foldable: 180 degrees Dimensions L x W x H: 7600 × 5670 × 7850 mm Total weight (without operating materials): 85 t Motor power: 44 kW

Condition: excellent (used), Water-cooled, pneumatically operated spot welding gun Fanikat DALEX Type A 3139-S3 Rated power at 50% duty cycle: 8 kVA Cgsdpfx Afexfrv Sjnjn Secondary short-circuit current: 9.5 kA Electrode force: 300 daN Arm spacing: 120 mm Arm reach: 250 mm With double-stroke mechanism – long stroke 52 mm – short stroke 27 mm Mains voltage: 400 V 50 Hz Protection: 16 A Mounted on a mobile ergonomic handling system KAROSTAR Weightless operation – length and height adjustable via articulated joints With cooling unit and integrated synchronous control unit R15 Z From a training facility Very good condition Extensive range of water-cooled electrode arms available

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 02.291.00, installation height: 950 mm, distance table to ram: 700 mm, retraction force: 450 t, pressing force: 100 t, oil tank capacity: 200 l, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Csdpeu Szzcofx Afnjgn Pressing force: max. 1,000 kN Retraction force: max. 450 kN Clamping plate size: 850 × 1,100 mm Installation height: 950 mm Max. installation height (steps 100 mm): 1,150 mm Ram stroke without swivel device: max. 700 mm Ram stroke with 90° swivel device: max. 700 mm Ram stroke with 180° swivel device: max. 1,000 mm max. possible ram stroke (steps 100 mm): max. 1,200 mm Mold weight: max. 5,000 kg Load of the upper clamping plate: max. 2,500 kg Load of the tilting device: 3000 kg Tilting angle: 65° Positioning accuracy Plane parallelism: 0.02 mm/1,000 mm Horizontal positioning accuracy: 0.04 mm Closing speeds Closing speed: max. 50 mm/s Opening speed: max. 50 mm/s Standard carriage speed: max. 50 mm/s Increased carriage speed: max. 200 mm/s Swivel-off speed standard: max. 50 mm/s Swivel speed increased: max. 180 mm/s Tilting speed standard: max. 50 mm/s Increased tilting speed: max. 100 mm/s Hydraulics Closing system pressure: max. 190 bar Opening system pressure: max. 200 bar Injection unit Pressure: 4-10 bar Volume: 3 l Ejector Table ejector force: max. 35 kN Ejector stroke table: max. 130 mm Ejector movement table: max. 100 mm Ejector force ram: max. 48 kN Ejector stroke ram: max. 150 mm Die cushion Die cushion force: 250 kN Size: 550 x 750 mm MACHINE DETAILS Connected load: max. 10 kVA Drive power: max. 7.5 kW Tank capacity: 200 l Machine weight: 8,500 kg

Condition: excellent (used), water-cooled, manually operated DALEX spot welding pliers Type 3218 Nominal power at 50 % duty cycle: 16 kVA Sec. short-circuit current: 13.5 kA Electrode force: 270 daN with cardan suspension and suspension bracket 1 pair of electrode arms 170 mm projection to that: DALEX RS 12 synchronous welding controller Power control by phase control Current time 1-99 Per synchronous with connection cable and 32 A CE plug and main switch Cgedpfx Afsf Hi A Eonen

Condition: excellent (used), air-operated, water-cooled spot welding gun for industrial industrial use Type DALEX 3427 D rated power at 50 % ED: 35 kVA Csdpfx Ajgibv Eofnjgn Sec. short-circuit current: 20.5 kA Electrode force: 580 daN with double stroke cylinder - long stroke 62 mm - pre-stroke 40 mm working stroke with stroke adjustment 0-22 mm with cardan suspension and suspension bracket 10 m connection cable and control cable electrode arms 350 mm arm distance 170 mm with synchronous welding control 15036

Condition: refurbished (used), Water cooler with refrigeration compressor DALEX (Deltatherm) type LT 4 Cooling capacity 4500 W Compressor output 0.98 kW Pump capacity 28 l/min Codpeq Tudgjfx Afnegn Water tank capacity 90 l Dimensions W/H/D in mm: 900 1005 800

Condition: refurbished (used), air operated spot welding machine DALEX type PMS 10-4 throat 350 mm with EH cylinder electrode force 65-390 daN rated power at 50 % ED: 50 kVA Sec. short-circuit current: 34 kA sec. open-circuit voltage 2,5-5,0 V with add-on control cabinet according to VDE 0100 Main switch Cgodpfxohnh Ets Afnjn 4-step switch Synchronous welding control 8033 start via foot switch Weight 410 kg