Used Spot Plate for sale (11,936)

Condition: used, functionality: fully functional, Fezer panel lifter with electric chain hoist PS 5 with rails, 250 kg load capacity, ideal for loading panel saws. Transport available at extra cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers. Ljdpfx Ajw E Irfemnjrl

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request Lrjdetqfhxepfx Amnsl The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation Ljdpfx Asxrb Tgomnjrl - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, Year of construction: 1958, machine/vehicle number: 197, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller length: 1,100 mm, sheet thickness steel (max.): 2 mm, overall weight: 750 kg, total length: 1,650 mm, total width: 1,000 mm, total height: 1,750 mm, input voltage: 400 V, Equipment: foot remote control, hardened rollers, Type: 3-roll plate rolling machine / bending machine Construction: Robust, fully steel construction ("all-steel") for high durability and rigidity. Versatility: Suitable for both sheet metal and profile bending, including conical bending. Application: Widely used in heavy industry. Lredpjy Spbhefx Amnsl

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: PS1/9173/9169/2, type of input current: three-phase, input voltage: 400 V, overall weight: 775 kg, electrical fuse: 105 A, compressed air connection: 5 bar, This Schlatter PS 130 is a robust, industrial spot welding machine renowned for its reliability in metal welding applications. Lrodpfjy Snycox Amnol

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Clamping plate: Scribing and marking plate -Length: 800 mm -Width: 800 mm -Height: 128 mm -Sheet thickness: 23 mm -Quantity: 1 mounting plate available Lredpfx Asy N Arusmnjl -Price: per piece -Transport dimensions: 800/800/H128 mm -Weight: 136 kg

Condition: used, Year of construction: 1997, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control DELEM DAC 360 oil volume 120 ltr. engine output 9.5 kW weight 7000 kg. range L-W-H 3950 x 1950 x 1680 mm well-maintained condition (!!) Ljdpfey I Dbbjx Amnerl equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear - DELEM CNC control unit type DAC 360 * front control panel, swiveling front left - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale

Condition: excellent (used), Year of construction: 2010, Technical data: Working width: 6500 mm Maximum bending capacity: 10.0 mm Maximum bending angle: 7.0 mm CNC control Diameter of upper roller: 420 mm Diameter of side rollers: 315 mm Diameter of central lower roller: 400 mm Conical bending unit by angling the two side rollers Mobile control panel with digital display Hydraulic folding supports CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 39 tons Optional equipment: Ledpfsx Iitiex Amnsrl Side bending aid Swiveling bending aid on top Condition: Very good condition, little used Operating hours: 100 hours The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 Lodsxf Uytopfx Amnjrl - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 360 mm Table height: 130 mm Transmission ratio: 120 : 1 Clamping surface: 375 x 430 mm Grid pattern on clamping surface: 400 x 125 mm, Ø 14 mm - Indirect indexing via handwheel on the worm gear, transmission ratio: 120:1 - Worm gear can be engaged/disengaged for direct and indirect indexing - Clamping via 2 clamping levers in any position - Crank handle with index plate - 1 index plate with hole counts: 22, 24, 29, 36, 37, 49, 57, 63 - 1 index plate with hole counts: 16, 27, 30, 33, 41, 47, 53, 61 - 1 index plate with hole counts: 23, 25, 28, 31, 39, 43, 51, 59 - 14 mm T-slots in the table surface - Table surface slightly face milled Overall dimensions L x W x H: 600 x 440 x 130 mm Ljdpfx Asy Sbwzsmnsrl Weight: 81 kg Good condition

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Clamping plate: Scribing and marking plate Lrodjy Nduqspfx Amnjl -Length: 1500 mm -Width: 1010 mm -Height: 170 mm -Sheet thickness: 44 mm -Quantity: 1 mounting plate available -Price: per piece -Transport dimensions: 1010/1500/H170 mm -Weight: 633 kg

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with adjustable feet -Length: 7990 mm -Width: 2480 mm -Height: 350 mm -Sheet thickness: 30 mm -Quantity: 2 mounting plates available Lrsdpfoy Ndtysx Amnel -Price: per piece -Transport dimensions: 7990/2480/H350 mm / 1200/800/1000 mm/piece -Weight: 9500 kg/piece

Condition: good (used), 2 used water-cooled spot welding machines Technical data: Max. welding output: 23.7 kVA Rated output at 50% duty cycle: 8 kVA Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Electrode force: 17 – 235 daN Cooling water flow rate: 4 l/min Weight: 85 kg per machine Lrsdsy Naq Ispfx Amnsl Price: 550,-- EUR net per machine Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1998, Used DAVI 4-Roller Plate Bending Machine MCB 2020 Technical specifications: Ljdjy I Uh Sepfx Amnsrl Year of manufacture: 10/1998 Manufacturer: DAVI Sheet working width: 2000 mm Sheet bending thickness: 10 mm Pre-bending thickness: 8 mm Roll length: 2050 mm Connections: 400V / 50Hz / 10 HP Power: 4 kW Surface-hardened 4 rollers Variable bending and rolling speed Safety device with emergency stop switch Digital display of the 4-roller positions on the screen

Condition: used, 1 WACKER VP1340 LOW VIB vibratory plate Lodpfoy Tkfqjx Amnerl on a pallet Color: as shown in the pictures, in accordance with the images and inspection Condition: used

Condition: ready for operation (used), functionality: fully functional, control type: PLC-controlled, 3-roll bending machine Manufacturer: FERRO S.R.L. Model: CIT - 1 Working area: 2000 x 6 mm Ledpfxoyw S E Hs Amnsrl Hydraulic tilting support for workpiece changes Control panel Emergency stop via cable pull Condition: good / immediately ready for use

Condition: excellent (used), Spot welding tongs Dalex Type 3011/2 Throat depth 250 mm Ledpfx Amey Inwgjnsrl Rated power 2.4 KVA 380 Volt

Condition: excellent (used), Working width ca. 2.600 mm Working height ca. 1.450 mm Number of cylinders 6 St. down holder 3 St. Stable hydraulic hole press, hole plate press, or gluing press for gluing or fixing workpieces such as frames, panels, windows, or doors. Lodpfjyrt Abox Amnorl

Condition: used, Bore: 30 mm Flight circle (ø): 115.9 mm Marking: MAN Length: 5.5 mm Material: steel Lrjdpfxjv Dgizs Amnol Knife: HW Z4

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data Lrsdpfxoy Twfqe Amnol 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch - Electrical safety control Optional equipment: - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: good (used), Year of construction: 2001, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good condition (!!) from a maintenance workshop Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment Ledpfxjy Ig R Ee Amnjrl * Front analog cutting angle display - 1x stable side fence, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x front emergency stop button - Rear safety guard (protective grille) - original operating instructions

Condition: used, functionality: fully functional, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, DAVI Croqueuse Plate Rolling Machine Roll diameter: 180 mm Lrjdpfx Aey Emtnsmnel Rolling length up to 3 m Thickness up to 15 mm

Condition: used, Year of construction: 1990, sheet width 3050 mm plate thickness 12 mm distance between columns 3100 mm table height over floor 900 mm cutting angle adjustment 0,5 - 3 ° no. of strokes 6 - 13 Hub/min back stop - adjustable 1000 mm down holder 18 St oil volume 350 l total power requirement 22,5 kW weight of the machine ca. 8 t dimensions of machine L x W x H 3,96 x 2,10 x 2,22 m - with adjustment of cutting gap - Lredpfsu Uu Smex Amnsl Accessories: electr. back gauge, spare knives

Condition: used, Year of construction: 1988, sheet width 3000 mm Lrjdpjvh Ivksfx Amnjl plate thickness 6 mm distance between columns 3100 mm cutting angle 1°15´ no. of strokes 16 Hub/min down holder 16 Stück back stop - adjustable 750 mm total power requirement 11 kW weight of the machine ca. 5,7 t dimensions of machine L x W x H 4,1 x 2,08 x 1,78 m Accessories: electr. back stop with DRO ELGO electric, angle front stop

Condition: used, Quick-change plates for Dreistern P3.125 profiling systems Production direction: left to right Ledpfey Sxx Aex Amnerl The following quantities and sizes are available: 3 pieces for 2 profiling frames (795x790) 3 pieces for 6 profiling frames (2385x790) Some of the tongue-and-groove elements are missing, but can be re-manufactured if required.