Used Spindie Moulder Tooling for sale (37,154)

Condition: used, Year of construction: 2008, Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute Hedpfx Aoplgmbjfnjfc

Condition: used, Year of construction: 2003, Overview The blowmoulder was built in 2003 by the manufacturer SIPA. The machine is still in operation and can be visited. It is used in a mineral water factory. The blowing machine is in good condition due to regular maintenance and technical upgrades, which have been well documented. Technical data  Nominal capacity: 24,000 bph for each format Nr. of moulds: 20 Last used formats: 0,33l (2 sets) 0,4l 0,5l (4 sets) 0,75l (2sets) 1,0l Dimensions: 7600 x 4200  x 4400 Weight of empty machine: 18,5t Weight of full machine, working condition: 24,5t Blowing air recovery system Overhaul for about 200,000 € recetly performed 161800 operating hours Scope of delivery  SFR 20 Preform feeder Preform hopper Spare parts vrious sets of moulds Documentation Program backup Hodpfxju Nph Is Afnofc

Condition: used, Year of construction: 2000, Overview The KSB3000 blowing machine was manufactured in 2000 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  Space requirement approx. 9x5 m²  Weight: 4,5 t  Operating hours: 23.824   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Hedpfx Asl Hxpnsfnofc

Condition: used, Year of construction: 2000, Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data Capacity: 7,600 bph on 1.0 L Formats: Neck finish 29/21 Preforms processed: RPET Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Sidel caterpillar oven 6 heating modules Sidel preforms tipper Sidel preforms hopper & feeder Sidel preforms infeed rail Sidel caterpillar oven & blowing wheel Solenoid valves Sidel Universal type Sidel PCC version V2.02 Sidel CE electrical cabinet (Siemens) Service history: Sidel maintenance completed September 2024 Elongation sensor retrofitted Additional service by client’s technicians Scope of Delivery  Stretch blow-moulder SIDEL SBO 6 Series 2 Preforms tipper Preforms hopper & feeder Preforms infeed rail Caterpillar oven & blowing wheel Hjdpfx Ajyb Tbpjfnjfc

Condition: used, Year of construction: 2003, Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  Capacity: 4.000 bph  4 cavities Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  space requirement approx. 22 m² (incl. preform feeding system) Bottles 1,0 l PET 0,5 l PET 0,33 l PET Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor. Hedpfjwizc Esx Afnefc

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Hodpfx Aonpbhvjfnofc

Condition: used, Year of construction: 2002, Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm  Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder VT 3010 Hfedpfx Ajry Iiwefnsc

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Hfedpfjrkgy Usx Afnec

Condition: used, Year of construction: 2006, Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute) Hfsdpfx Ael Hxpkefnec

Condition: used, Year of construction: 2001, Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Hodpfxel Hxprs Afnjfc

Condition: reconditioned (used), Year of construction: 1976, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – workshop inspected Machine No.: 51720/08 Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system Hedpfxeyipmwo Afnofc - Operating manual Used as seen, without warranty The machine technically corresponds to the standard at the time of manufacture.

Condition: used, Number of boring spindles 6 St. Working width 230 mm Working height 160 mm Length of the planing table 1.200 mm Feed motor 5 kW Feed speed 40 m/min. Hfodexpuufjpfx Afnoc

Condition: used, Working width 230 mm Working height 160 mm Hedpfsxmh U Hex Afnofc control Memory Plus

Condition: used, Year of construction: 2003, travel -x axis 180 mm travel -z axis 370 mm Total weight, approx. 65 kg Hsdpfx Afsydqnfsnsfc dimensions of the machine ca. 2,0 x 1,2 x 2,0 m Tool Presetter DMG Microset - ECO 1

Condition: used, Year of construction: 2003, travel -x axis 300 mm travel -z axis 400 mm tool taper VDI 40 / VDI 50 Total weight, approx. 141 kg dimensions of the machine ca. 1,2 x 0,8 x 0,85 m Tool Presetter ULMER - Präzisa 400 Hfjdpfxeydqm Us Afnsc

Condition: like new (used), Bore diameter 20 mm Diameter 130 mm Hfodolf Ncrjpfx Afnoc Number of knives 4 z= cutting width 12 mm

Condition: used, Clamping length: 410 mm Hfodpfxox Ru S Ne Afnoc Diameter: 50 mm Original Weinig slip-on shaft for easier changing of heavy tools on the horizontal spindles.

Condition: used, Bore: 40 mm Diameter: up to 160 mm Designation: MEC Lot of round bar milling cutters for producing Ø 20, 25 & 40 mm. Hjdpfx Afox H Tg Ronjfc

Condition: used, Number of boring spindles 5 St. Hfedjx Ecguepfx Afnec Working width 230 mm Working height 120 mm

Condition: used, Number of boring spindles 4 + 2 St. Working width 230 mm Working height 120 mm Feed speed 5-24 m/min. Hfjdpfxox An R To Afnoc

Condition: used, Number of boring spindles 7 St. Hsdoxzdwyjpfx Afnefc Working width 260 mm Working height 160 mm Length of the planing table 2.500 mm Feed motor 4 kW Feed speed 30 m/min.

Condition: excellent (used), roller table Ja ja/nein length ca. 3.200 mm width ca. 1.400 mm height ca, 1.600 mm Motors 2 Hfjdpfexwbpfsx Afnjc table - swivable Ja

Condition: used, Bore: 30 mm Speed: max. 10,000 rpm Cutting circle (ø): 125 mm Marking: MEC Length: 63 mm Hfodpfjxvcgcsx Afnoc Material: Steel Knives: DIA Z18 Set: consisting of two cutters.

Condition: used, Bore: 50 mm Swing diameter (ø): 161 mm Length: 15 mm Material: steel Knives: WP Z2 V2 Hjdpfx Afexvcb Henefc

Condition: used, Number of boring spindles 5 St. Working width 170 mm Working height 120 mm Hodpfjxu H R Asx Afnsfc Length of the planing table 2.000 mm Feed motor 2,2 kW Feed speed 5-24 m/min.