Used Side Loader for sale (23,363)

Condition: used, axle configuration: 3 axles, first registration: 08/2003, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22,5, wheelbase: 9,480 mm, Year of construction: 2003, Equipment: ABS, Axle configuration Tire size: 385/65R22.5 Axle brand: BPW Rear axle 1: Tire tread depth left: 25%; Tire tread depth right: 25% Rear axle 2: Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 3: Tire tread depth left: 40%; Tire tread depth right: 40% Knjdoz Iacpepfx Aamjc Weights Unladen weight: 12,190 kg Payload: 26,810 kg GVW: 39,000 kg Condition Damage: none Identification License plate: OH-11-HH

Condition: good (used), Year of construction: 1985, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm Knsdpfx Aoz Hwc Roamec -Weight: 227 kg

Condition: used, maximum load weight: 37,100 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2008, total length: 12,290 mm, total width: 2,550 mm, total height: 2,100 mm, Year of construction: 2008, Additional information: * Type | First axle: Continental R * Tire size | First axle: 445/45 R19.5 * Tire tread depth inner left | First axle: 30% * Tire tread depth inner right | First axle: 30% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Continental R * Type | Third axle: Continental R * Tire size | Second axle: 445/45 R19.5 * Tire size | Third axle: 445/45 R19.5 * Tire tread depth inner left | Second axle: 30% * Tire tread depth inner left | Third axle: 30% * Tire tread depth inner right | Second axle: 30% * Tire tread depth inner right | Third axle: 30% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lifting axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension Knedsz E Ubzspfx Aamec * Suspension | Third axle: Air suspension Additional features: * Central lubrication * Homepage * Lifting axle * SemCollection * Steering axle Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors. The stated prices exclude BPM and are only valid for export.

Condition: new, functionality: fully functional, mileage: 1 km, power: 55.16 kW (75.00 HP), fuel type: diesel, color: yellow, empty load weight: 5,500 kg, operation weight: 5,500 kg, maximum load weight: 2,500 kg, lifting power: 2,500 kg/m, lifting height: 4,500 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: GG2500T, Equipment: additional headlights, cabin, low noise, Telehandler GG2500TEL Telehandler The Gunter Grossmann GG2500TEL is a modern telehandler that combines a powerful engine with exceptional versatility. Powered by a Kunming Yunney Power Euro 5 engine delivering 75 HP, it meets strict emission standards and is designed for demanding tasks under various working conditions. Powerful Engine and Efficient Hydraulics Kodpfjygnvljx Aamsnc The 75 HP engine works in conjunction with a hydraulic system operating at 16 MPa with an oil flow rate of 90 L/min, ensuring fast, precise, and energy-efficient task execution. The hydraulic setup guarantees smooth boom movements and excellent load control. Lifting Capacity and Durability With an operating weight of 5,500 kg and a rated lifting capacity of 2,500 kg, the GG2500TEL offers stability and safety when handling heavy loads. It has a maximum lift height of 4.5 meters, enabling efficient material transport at significant heights. Versatility in Working Range Equipped with a 1.0 m³ bucket and telescopic boom, it can handle loads from 800 kg (with extended boom) up to 2,500 kg (with retracted boom), offering a broad range of operational flexibility for various applications. Mobility and Compact Dimensions With a top speed of 20 km/h, a wheelbase of 1,550 mm, and a track width of 2,550 mm, the machine delivers excellent stability and maneuverability. Its compact size — 6,270 mm long, 2,100 mm wide, and 2,670 mm high — facilitates easy transport and operation in confined areas. Machine weight: 5,500 kg Engine: Kunming Yunney Power Euro 5 Engine power: 75 HP Lifting height: 4,500 mm Rated lifting capacity: 2,500 kg Rated speed: 2,400 rpm Hydraulic pressure: 16 MPa Hydraulic oil flow: 90 l/min Standard tyres: 16/70-20 Bucket capacity (m³): 1.0 Max lifting with retracted boom: 2,500 kg Max lifting with extended boom: 800-1,000 kg Maximum speed: 20 km/h Wheelbase: 1,550 mm Track width: 2,550 mm Dumping height: 2,850 mm Bucket capacity at max lift height: 800–1,000 kg Length: 6,270 mm Width: 2,100 mm Height: 2,670 mm

Condition: new, mileage: 1 km, color: yellow, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: additional headlights, all wheel drive, cabin, Gunter Grossmann GG09 + KUBOTA EURO 5 The new Günter Grossmann GG09 Loader The Günter Grossmann GG09 loader (900 kg load capacity) is the brand-new machine from Günter Grossmann, a high-quality machine engineered for a European company. This loader delivers outstanding power and is capable of performing reliably under all working conditions. The loader is extremely user-friendly and comfortable to operate. The control panel is clearly laid out, intuitive, and straightforward. The cab is soundproofed, insulated, and equipped with heating. Additionally, the machine features a comfortable and elegantly glazed cabin, ensuring both safety and operator comfort even during long shifts. The loader is built with a highly durable and robust construction. It comes standard with a quick coupler, allowing for fast attachment changes without leaving the cab. Additional equipment available on request: Knjdpsvuk U Aefx Aamoc (Excl. VAT) Standard delivery includes: GG09 loader + bucket + quick coupler Model 900 kg Specifications Model: GG09 Load capacity: 900 kg Engine: Kubota Euro 5 (V1505) Rated engine power: 24.47 HP Number of cylinders: 4 Rated speed: 2400 rpm Operating weight: 2300 kg WORKING RANGE Bucket volume: 0.5 m3 Load capacity: 900 kg Lifting height: 2750 mm MAIN DIMENSIONS Overall length (bucket on ground): 4037 mm Overall height: 2264 mm Overall width: 1446 mm WORKING RANGE Bucket volume: 0.5 m3 Load capacity: 900 kg Lifting height: 2750 mm

Condition: used, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 01/2015, loading space length: 13,590 mm, loading space width: 2,500 mm, loading space height: 1,820 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Technical Overview: Chassis: 2 axles, steered, TRIDEC steering system (mechanical, without electronics) * Gross vehicle weight: 30 t (12 t fifth wheel load + 18 t axles) * Tyres: 4× Goodyear 385/65 R22.5 * External dimensions: 13,820 × 2,550 × 4,045 mm * Upper deck internal dimensions: 13.59 × 2.5 × 1.82 m * Lower deck internal dimensions: 9.94 × 2.5 × 1.82 m * Lower deck floor height from ground: 320 mm * Axle spacing: 1,400 mm --- Body & Materials: * Plywood side walls/front: 21/24 mm, white polyester-coated * 30 mm insulated polyester roof with rainwater management * Anti-slip aluminium floors (grey) * Stainless steel front and corner profiles * Hot-dip galvanised chassis to ZINQ standard --- Safety & Handling: * WABCO air brake system, drum brakes, ABS/EBS-E with ECAS * Indicator lights (ABS/EBS/ECAS) clearly visible * WABCO SmartBoard: Weight display, odometer, adjustable loading height Knsdpfoyb U Ikox Aamjc --- Comfort & Operation: * 3 large side flaps (battery, lift/SmartBoard, technical equipment) * Multi-deck lift Dhollandia, 2,500 kg capacity, LED platform, foldable railings/ramps * Lift controls: externally on the right, integrated in the guard rail --- Electrics & Lighting: * Full LED interior and exterior lighting, LED work lights/platform * 2× 230 Ah batteries, charged via tractor unit * Master switch located behind the side flap, linked with lift controls --- Finish & Advertising: * Exterior colour: RAL 9005 * Reflectors: 3M * Optional: advertising space available --- Key Advantages: * Replaces up to 3 standard trailers with 2 double decks * Customisable: axles, dimensions, cooling options selectable * Suitable for long-haul and distribution transport

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: FPZ effepizeta, side channel blower side channel compressor Kjdpfownmn Rex Aamenc -Type: SCL 70 SH -Drive shaft: Ø 35 x 90 mm -Bolt circle: Ø 160 x 10 mm -Drive motor: can be supplied at an additional cost -Dimensions total: 545/520/H565 mm -Weight: 37 kg

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulically adjustable loading ramps (width) * Air suspension * Extendable * Tare weight: 11,020 kg -----Internal vehicle number: 11010----Errors and prior sale excepted. Knedpfx Aajwta Alsmoc WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp – German, English – WhatsApp – German, English, Arabic.

Condition: new, empty load weight: 300 kg, maximum load weight: 1,700 kg, overall weight: 2,000 kg, loading space length: 3,010 mm, loading space width: 1,510 mm, loading space height: 300 mm, tire size: 155/80R13, Braked low-loader tandem from the manufacturer ANSSEMS model GTT2000 301x151. The Anssems box trailer with brake has aluminum drop sides, internal locks, external lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar as standard equipment. Knederx Spxspfx Aamsc We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, corrugated grid attachment, side wall attachment, rear support set, tool box, lashing straps and anti-theft device at a reasonable price.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 5,000 kg, empty load weight: 156 kg, total length: 1,300 mm, construction width: 1,300 mm, Sideshifter Kedorf Ilbjpfx Aamjnc Load centre: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: New equipment Technical condition: New Description: SIDESHIFTER high-performance model. Sideshift: +/- 100 mm with SMOOTHROLL – support roller guidance in the lower jaws to ensure smooth sideshift movement, even in dusty environments, and SOFTSTOP – automatic end position damping to protect the mast profiles. Fork carriage width: 1,300 mm Load capacity: 5,000 kg at 500 mm LSP Load centre distance: 82 mm Own load centre at 44 mm Weight: approx. 156 kg Paint finish: RAL 7021 (black grey)

Condition: used, mileage: 553,732 km, power: 353 kW (479.95 HP), first registration: 07/2011, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 13 m³, loading space length: 6,000 mm, loading space width: 2,380 mm, loading space height: 917 mm, Year of construction: 2011, Equipment: ABS, air conditioning, parking heater, 1. Vehicle Base* Wheelbase 1795 mm * Rear frame overhang 800 mm * Engine D2676LF07 ? 480 hp / 353 kW ? EURO 5 SCR ? 2300 Nm * Transmission ZF 16 S 252 OD * Fuel tank 400 l (right side) + 35 l AdBlue * Front axle VOG?09 / VP?09 driven Kedpoz Rh Tcsfx Aamjnc * Front springs Parabolic 9.5 t * Rear springs Trapezoidal 16 t * Tandem axle configuration * Instrument panel km/h Base-Line ----2. Cab & Interior* Cab M (2240 mm wide, 1880 mm long) * Seat covers, comfort quality * Driver's comfort seat, air-suspended, air-conditioned, lumbar support, heating * Passenger seat, static, longitudinal and backrest adjustable * Cab mounting, air-suspended * Armrests for driver's seat * Storage compartment + drawer in dashboard * Electric windows * Sun visor, front windshield * Exterior sun visor * Grab handles A- and B-pillar ----3. Climate control, comfort & electronics* Air conditioning AC R134A * Auxiliary heater Eberspächer D4S * MAN Tronic on-board computer * Radio MAN BasicLine 24V * CB radio antenna + car phone antenna * Central locking * 12V & 24V sockets in the cab * Reading lights, driver/passenger * Entry lighting * Headlight beam angle adjustment ----4. Drivetrain & PTOs* Front-wheel drive, switchable * Transfer case G172 * Front axle differential lock + warning buzzer * Rear axle differential lock * Axle ratio i = 4.33 * EDC engine control * PTO NH/1C without flange * Fine dust and pollen filter ----5. Brakes & Safety* MAN BrakeMatic * ABS * Drum brakes front & rear * Brake connection 2-line * Parking brake, pneumatic * Acoustic reversing warning (can be switched off) * Speed limiter 89 km/h * Cruise control * Work lights, roof left * Additional high and low beam headlights * Halogen double headlights H7 * Position and marker lights ----6. Hydraulics & Tipper equipment* MEILLER axial pump 296/54 * Tipper bridge operation in the cab * Controlled tipping lever brake (EVBec) * Hydraulic connection at the rear for 3-way tipper trailer * Mineral oil for tipping hydraulics ----7. Body: MEILLER tipper body D421* Tipper body 6000 × 2380 mm * Bridge floor VS120 ? 7 mm * Side boards M-JET VS100 ? 4 mm * Side boards, 900 mm * Bordmatic left * Rear gate, pivoting with automatic locking * Shear plate 350 mm * Corner posts, fixed * Deflector, front wall 500 mm * Steps, front wall ----8. Chassis, protection & accessories* Underrun protection at the rear, foldable * Steel bumper, three-part * Trailer coupling RINGFEDER 5050 A * Crossmember for trailer coupling * Front mud flaps * Plastic fenders MEILLER * Spray suppression ----9. Electrics & Control* Batteries 2× 175 Ah * Alternator 28V 80A * Trailer sockets 24V 7+7-pole + ABS socket * Display of operating data * Boost pressure indicator ----10. Tires & WheelsFront axles:* 2× 385/65 R22.5 Steering S+G TL 160K * 2× 385/65 R22.5 Steering S+G TL 160K Rear axles:* 4× 315/80 R22.5 HSC1 TL 156/150K * 4× 315/80 R22.5 HSC1 TL 156/150K ----* Technical total weight: * Tare weight: * Permissible trailer load: * Overall length: * Wheelbase: 1795++ mm ----Vehicle number: 11798 &----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We would be happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of it. Among other things, we can offer you the following services at an additional cost: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export

Condition: used, maximum load weight: 34,780 kg, overall weight: 48,000 kg, axle configuration: 2 axles, first registration: 05/2025, next inspection (TÜV): 05/2027, loading space length: 12,200 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 320 mm, Year of construction: 2025, Equipment: ABS, 2-axle low-bed/low-loader trailer with full equipment First registration 05/2025 German registration and from first owner Overall length 13,162 to 19,012 mm (telescopic, 5,850 mm, extendable in 500 mm increments) Saddle height 1,200 to 1,280 mm Length of low-bed platform in normal position 6,350 mm Length of low-bed platform when extended 12,200 mm Length of gooseneck 3,720 mm Length of rear axle frame 3,020 mm Loading height on rear axle frame only 900 mm LOADING HEIGHT LOW-BED platform approx. 300 mm (loaded) Total weight (technical) 48,000 kg Saddle load (technical) up to 24,000 kg Axle load (technical) 24,000 kg Unladen weight 13,220 kg Chassis: 3-layer paint finish RAL 7024 including complete hot-dip galvanizing Detachable gooseneck with external main frame GROENEVELD central lubrication system for front and additional system for rear All axles hydraulically steered, TRIDEC system SAF axles with drum brakes WABCO trailer EBS with anti-roll protection RSS Air suspension with lifting and lowering system with 190 mm total stroke Tires 9x 245/70 R 17.5 Continental ALCOA aluminum rims, Dura-Bright, high gloss Aluminum air tank 24-volt electric hydraulics Overwidth package 8 pairs of foldable loading platform extensions, 225 mm each 3 pairs of container locking adapters for accommodating a 40 ft or 20 ft container Side wall structure on the saddle platform Ramps for the low-bed platform Knodpfx Aaoz Iu Uyjmoc 5 pairs of swivel lashing eyes, 10,000 daN lashing force in the low-bed 4 pairs of stake pockets in the outer frame 3 pairs of swivel lashing eyes on the rear 1 pair of lashing eyes in the rear bumper, LC 6,000 daN RENTING is the new BUYING, with us, also available for rent or full-service leasing immediately -----

Condition: used, maximum load weight: 64,900 kg, overall weight: 94,100 kg, axle configuration: > 3 axles, first registration: 08/2021, Gooseneck, detachable * Loading platform: 3,750 mm x 2,480 mm * Maximum technical saddle load: 30,000 kg (without using the front axle) * Hydromechanical steering with multi-chamber hydraulic cylinder * Hydraulic lifting and lowering function * 2 support cylinders * Hydraulic differential lock * Operating elements for hydraulic functions on the left-hand side in the direction of travel, including a pressure gauge with a diagram for determining saddle load, as well as a pressure gauge for monitoring the pre-tension pressure in the steering system * Access ladder to the gooseneck * Hydraulic claw locking for the platform or axle * Multifunction quick coupler * Air gun for cleaning the multifunction quick coupler ---- Front 2-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,145 mm + 340 mm / - 260 mm * Additional lifting option for all axles in the front axle assembly Kodpfxoz Ivnuj Aamenc * Floor covering: sheet metal * Additional warning sign holders, mounted on the front axle assembly ----Braking system with TIM Drum brake all-wheel drive air brake system with diaphragm brake cylinders * Automatic load-dependent brake (ALB) (AGS) * Parking brake by means of spring-loaded cylinders * EBS / ABS (Electronic Braking System) manufactured by KNORR-BREMSE * Socket for EBS on the front end of the gooseneck * Vehicle stability control RSP (Roll Stability Program) ----Flatbed platform, single telescopic * Two external box-shaped outer/inner beams * Height of the outer beams: 300 mm * Carrier width of the outer beams: 730 mm + 120 mm edge strip * Front end with coupling claws * Without floor covering between the two longitudinal beams * (L x W) 7,500 mm x 2,750 mm, telescopable by 2,800 mm to a maximum of 10,300 mm * With a separating point * Loading height, loaded: approx. 450 mm, ground clearance: approx. 150 mm * Including a short, permanently welded-on front ramp * And 1 pair of aluminum ramp wedges, at the front ----Rear 4-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,100 mm + 385 mm / - 215 mm * Floor covering: sheet metal ----Combined excavator-tipping body * (Length x Width) 5,770 mm x 880 mm/1,538 mm * Splash guard with water-absorbing mats on all axles * Aluminum partition sheet in the excavator body, front and rear, plug-in ----Load securing Gooseneck * 4 pairs of threaded sockets M30 * 1 pair of lashing points LC 20000 daN * 2 pairs of lashing points LC 800 daN Front axle assembly * 3 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 1 pair of threaded sockets M36 on the side (16,000 daN) * 1 pair of lashing points LC 20000 daN Loading platform, flatbed * 1 pair of lashing points LC 20000 daN * 3 pairs of lashing points LC 10000 daN * 3 pairs of threaded sockets M 30 * 3 pairs of threaded sockets M30 on the inner beam Axle assembly * 2 pairs of lashing points LC 10000 daN * 2 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 3 pairs of rail pockets 100 x 50 mm (LC 2000 daN) * 1 pair of threaded sockets M36 in the excavator body (16,000 daN) * 4 pairs of el

Condition: used, Year of construction: 2016, operating hours: 11,448 h, Equipment: ABS, all wheel drive, Hyundai HL 970 XT - Central lubrication system - LED work lights - Rear-view camera - Joystick steering - Air-suspended driver's seat - Rear-view camera - Heated mirrors Errors and prior sale excepted. Internal vehicle number: 10672. WhatsApp support available! Knodpfx Aaoz Nu I Domoc If you have questions about the vehicle or need further information, feel free to contact us via WhatsApp.

Condition: new, Year of construction: 2023, machine/vehicle number: 15562, type of input current: three-phase, overall weight: 900 kg, input voltage: 400 V, operating pressure: 7 bar, input frequency: 50 Hz, Single-sided drilling and dowel insertion machine Omal Velox 1300, manufactured in 2023. Equipped with a glue gun sensor and a laser measuring device. Knodpsz Ngkdefx Aamsc

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2105025, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, input current: 72 A, Four-sided planer Leadermac Compact LMC-523C with 5 spindles, manufactured in 2021. Working width 15 - 230 mm, working thickness 10 - 150 mm, minimum piece length 800 mm (300 mm for sequential feed). Spindles: 3 x 7.5 HP and 2 x 10 HP, spindle speed 6,000 rpm, spindle diameter 40 mm. Feed motor 5 HP with inverter, feed speed 6 - 24 m/min. Fully enclosed machine with sound insulation, chrome-plated feed table, pneumatic pressure rollers with 3 adjustment positions, and a solid cast iron frame. Connection 380 V / 50 Hz, CE version. Options: infeed table 2.5 m (instead of 2 m), pneumatic side pressure roller on the left spindle, split pressure roller at the top, additional tables for multiple sawing on the 2nd bottom spindle, anti-kickback device, and Schneider Easyset touchscreen (1 x conventional and 2 x NC). Kedpfxoz Ngits Aamsnc

Condition: good (used), mileage: 625,836 km, power: 118 kW (160.44 HP), first registration: 01/2011, fuel type: diesel, tire size: 205/75R17,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 7,030 mm, total width: 2,600 mm, total height: 3,440 mm, loading space length: 3,580 mm, loading space width: 2,260 mm, loading space height: 2,340 mm, Year of construction: 2011, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, seat heater, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Halogen lamp - Short cab - Manual - Radio/cassette - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Payload: 2095 kg, Tare weight: 5395 kg, Gross vehicle weight: 7490 kg, Total tank capacity: 150 liters, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Engine power: 118 kW (158 Hp), Number of cylinders: 4, Displacement: 4462 cc, Fuel: Diesel, Euro: 5, Transmission type: Automatic, Transmission type: ZF, Gears: 6, Power steering, ABS, Starter battery, System length: 88 cm, System type: ,,,,, Central locking, Number of seats: 2, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Manufacturer of cooling unit: Konvekta, Model of cooling unit: .?, Cooling unit: Cooling compressor, Body insulation, Wall thickness: 90 mm, Type of cooling: Cooling and freezing, Day/night cooling: Day cooling, Additional evaporator, Spare wheel, Tread depth spare wheel: 11% = Additional Information = Transmission Transmission: ZF, 6 gears, Automatic Axle Configuration Tire size: 205/75R17.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 4 mm; Tire tread depth right: 4 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Weights Unladen weight: 5,395 kg Payload: 2,095 kg GVW: 7,490 kg Functional Loading area height: 101 cm Cooling unit: engine-driven Wall thickness: 90 mm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: BX-XT-09 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers Kjdpfxsyzx Ddj Aamsnc • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request through our website. Inquire directly about our European warranty package.

Condition: used, empty load weight: 3,100 kg, maximum load weight: 6,900 kg, overall weight: 10,000 kg, first registration: 09/2006, next inspection (TÜV): 10/2027, suspension: steel, color: red, Year of construction: 2006, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, * German trailer, second-hand Kjdpfez Sc R Hjx Aamonc * Vehicle ID number: WMM0000060049937 * New vehicle inspection / valid until 10/2027 Technical data: * Overall length 8300mm * Overall width 2550mm * Permissible total weight 9990 kg * Technically permissible total weight 11000 kg * Unladen weight 3100 kg * Payload 6890 kg * Length of loading area 6000mm * Width of loading area 2450mm * Loading height 900mm Delivery throughout Germany possible!!! Trade-in possible!!! Leasing and financing possible, even without a down payment. Errors, printing errors and prior sale excepted.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2201010, Four-sided planer Leadermac Compact LMC-530C with 5 spindles, year of manufacture 2022. Working width 15 - 300 mm, working thickness 10 - 150 mm, minimum piece length 800 mm (300 mm with sequential feed), infeed table 2500 mm. Spindles: 15 HP, 10 HP, 10 HP, 20 HP and 20 HP, diameter 50 mm, 6,000 rpm. Feed motor 7.5 HP, 6 - 24 m/min. Schneider 5.7-inch touchscreen EASYSET with NC control of axis 3 (left radial), axis 4 (top radial) and height adjustment of the pressure bar. Pneumatic left side pressure roller, two-part pressure shoe, extra table and anti-kickback device for multiple sawing. Knedpfxsz Ngiye Aamoc

Condition: used, Year of construction: 2020, operating hours: 2,200 h, Equipment: all wheel drive, KOMATSU WA 70M 8E0 Steering wheel control Single-lever control Quick coupler Pallet forks Knodpfx Aajz Shb Djmsc Bucket with teeth Tires: Dunlop SP T 9 405/70 R 18, approximately 30% tread remaining Original paint Lighting Road approval One owner

Condition: used, Year of construction: 2012, operating hours: 3,652 h, Equipment: ABS, all wheel drive, KRAMER ALL-WHEEL DRIVE 950 – DEUTZ ENGINE – HYDRAULIC QUICK COUPLER – PALLET FORK – 6,500 KG – ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * 3,652 OPERATING HOURS * 2012 YEAR OF MANUFACTURE Ksdpszzg Twjfx Aamjnc * DEUTZ ENGINE * 58 KW * PERMISSIBLE TOTAL WEIGHT: 6,500 KG * PALLET FORK * HYDRAULIC QUICK COUPLER * TIRE SIZE: 14.5-20 * GOOD TIRES EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATES, AND 17-21 DAYS AUSTRIA LICENSE PLATES EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to changes, errors and prior sale! You can find more vehicles on our website: Sales are exclusively subject to our general terms and conditions – see website. Important note – important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, maximum load weight: 6,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2013, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 850 mm, total length: 13,650 mm, total width: 2,550 mm, Equipment: ABS, German vehicle Trailing lift axle (lockable) BPW axles, Air suspension, Raise/lower function, Various lashing points, Loading area length: rear 9.15 m front 4.15 m Loading height: rear 0.85 m front 1.03 m 4 units available !!!!!Sale does not include ramps!!!!! Ksdpez Shr Aofx Aamonc If interested, please call Christian Bredemeier.

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. The following is an excerpt of the equipment. Complete equipment available upon request. Gooseneck: Gooseneck with angled front corners at approximately 45° and rear slope of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring approximately 30 mm thick Loading platform: Kjdpfx Asz Sh Htoamjnc Double-extendable design with rear slope of approximately 500 mm x 8°. 6 pairs of lashing rings that fold outwards (LC 5,000 daN) 4 pairs of lashing rings that fold outwards (LC 10,000 daN) 1 pair of lashing rings horizontally at the front of the loading platform (LC 10,000 daN) 1 intermediate table, approximately 250 mm Hardwood flooring approximately 48 mm thick, checkered steel plate over the axles Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles: BPW axles and suspension; all axles hydro-mechanically steered. Technical axle load: 12,000 kg each Air suspension with lifting and lowering valve Axle tool Tires: Tires 245/70 R 17.5, load index (146/146 F) Brand of our choice Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for an approximate lifting capacity of 24 tons (approximate test load of 50 tons) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: First-class and durable corrosion protection High-quality 2-component (2K) topcoat, single color in RAL 3002 carmine red Rear section metallic and painted in RAL 9010 (pure white) Steel structure: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations Lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connecting bar with 24N, 24S & 15-pole sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Including the following additional equipment: 2-inch kingpin Galvanized steel front wall, approximately 400 mm high Yellow-red air couplings on the galvanized front connecting bar A spare wheel holder in front of the front wall Electro-hydraulic unit Rear steering from front and rear, operable via cable remote control with pushbuttons, with single-axle steering control (without installation in the tractor unit) Mounting on the rear area of the gooseneck for aluminum ramp plates Mounting rail for aluminum ramp plates at the rear of the vehicle Galvanized folding supports under the slope of the loading platform Aluminum side walls and rear wall on the gooseneck, plug-in design, approximately 2,440 x 400 mm (L x H) The rear galvanized plug-in edges are removable (overall length approximately 2,560 mm) A galvanized toolbox, integrated into the angled gooseneck 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40' or a 45' container 8 pairs of pocket holders for plug-in edges approximately 100 x 50 mm in the outer frame of the loading platform Extensions galvanized, extendable by approximately 230 mm on each side Sliding mounting rails for aluminum ramp plates at the rear of the vehicle 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2 and removable protection around the pump 2 LED reversing lights mou

Condition: new, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel (approx. 750 mm x 10°) * 3 pairs of lashing rings (LC 5,000 daN) Knedpfxoyvnfgo Aamjc * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading platform with rear bevel (approx. 1,000 mm x 8°) * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hooking tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick; over the axles, diamond plate surface Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 235/75 R 17.5 3PMSF tyres, brand at our discretion Axles: * BPW axles, two rigid axles, two trailing steering axles, air-suspended, with drum brakes, lifting/lowering function * Steering axles with electromagnetically-activated reverse lock (via reverse gear or manually) * Axle tools Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit Steel structure: * Steel construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield 355 MPa) S690QL/S700MC (yield 690 MPa) Electrical system: * Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets (ISO standard: 24N - ISO 1185, 24S - ISO 3731, 15-pin - ISO 12098) Paintwork: * Premium and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-color topcoat RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the bulkhead (without spare wheel) * 2 inch kingpin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * Receptacle at the rear of the gooseneck for ALU loading ramps * Galvanized drop-down supports under the loading area bevel * Bracket for a revolving beacon at the rear of the trailer * Brackets left and right on the gooseneck and rear plate for warning signs including socket * TPMS tire pressure monitoring system compliant with ECE R 141 * Removable ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized insert posts are removable (body length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container locks in the loading platform for one 20' (30') or one 40' container * Sliding hook-in rails for ALU loading ramps at the rear of the vehicle * 6 pairs of pockets for plug-in posts, approx. 100 x 50 mm in the outer frame of the loading area * Galvanized extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control based on current axle load and load status * 2 LED reversing lights mounted on the rear plate * 2 pairs of ferry-

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516327000881, Year of construction: 2007, operating hours: 15,936 h, load capacity: 4,000 kg, lifting height: 4,910 mm, fuel type: electric, mast type: duplex, fork length: 1,200 mm, TECHNICAL DETAILS Lifting capacity: 4,000 kg Lifting height: 4,910 mm Free lift: 0 mm Fork length: 1,200 mm Minimum fork width: 440 mm Maximum fork width: 1,150 mm Number of wheels: 4 MACHINE DETAILS Mast type: Duplex Operating hours: 15,936 h Drive: Electric Battery voltage: 80 V Battery capacity: 930 Ah Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,250 x 3,180 mm Shipping weight: 6,777 kg EQUIPMENT Fork adjustment Side shift Full cabin Radio Ksdpfx Aozza Steamjnc Joystick Heater Work lights Documentation CE marking