Used Shelving Cantilever For Wood for sale (11,156)

Condition: used, Included in the scope of delivery: 01x single-use pallet, used Material: wood Dimensions: 1,900 x 1,000 x 136 mm Forklift access: 4-way Design: 6 deck boards (75 mm wide) Board thickness: approx. 20 mm Base: 3 skids Weight per piece: approx. 18.24 kg Dcedpfxeyk Dmhj Aqvjp The stated price refers to the pick-up price (per unit), incl. VAT. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pick-up only. If transport or shipping beyond pick-up is required, additional costs will apply, which depend on delivery location and scope, and can be inquired about separately.

Condition: good (used), Technical Data for Shelf Racking: Racking System: Stow Type: Stowshelf Technical Data for Assembly: Number of rack rows: 01 pcs. Rack length: approx. 6,535 mm Number of levels incl. ground level: 05 pcs. Number of bays per rack row: 01 pcs. at 1,265 mm Scope of Delivery Includes: 06x Upright frames, used Material finish: Sendzimir galvanized Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment pitch: 25 mm Incl. base plates The uprights are pre-assembled 2,500 mm high 600 mm deep 25x Shelves, used Material finish: Sendzimir galvanized Dimensions: 1,265 x 600 x 30 mm 100x Shelf supports, used Material finish: Sendzimir galvanized For mounting the shelves 02x Cross braces, new Material finish: Sendzimir galvanized For stabilizing the shelf racking Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. Transport or shipment of this item beyond collection is subject to additional charges, which can be requested from us depending on the delivery location or scope of delivery. Dedpfx Aqsym Sybovjcp

Condition: excellent (used), Xerox / Fiery EX-P 6 controller for the Xerox Iridesse. Tested and in good working condition. All the equipment mentioned is not for sale/resale in Russia or any country subject to an EU embargo. Dodpfx Aqoxyv Nxsvjcp

Condition: good (used), Technical specifications for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical setup information: Number of shelving rows: 01 pc. Shelf length: 1,660 mm Number of bays per shelving row: 01 pc. Scope of delivery includes: 02x shelving uprights, used Material finish: Sendzimir galvanized Design: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31 x 60 x 0.88 mm Weight per piece: approx. 8.92 kg Incl. bracing and base plates (Rack uprights are pre-assembled) 2,490 mm high 600 mm deep 06x wire mesh shelves, used Material finish: Sendzimir galvanized For upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 590 mm Total height: approx. 30 mm Frame profile: approx. 25 x 25 mm Mesh size: approx. 68 x 50 mm Weight per piece: approx. 6.90 kg Note: Water-permeable (up to 70%), suitable for sprinkler systems and thus optimized fire protection. Air-permeable – allows good air circulation, suitable for example in deep-freeze warehouses. Light-transmitting – creates a bright working environment in the warehouse. 24x shelf supports, used Suitable for slotted uprights Dcedpoyzyt Hofx Aqvep Material finish: Sendzimir galvanized 01x diagonal bracing, used Model designation: KV31313 Weight per piece: approx. 0.405 kg Material finish: Sendzimir galvanized 01x load sign Indicating bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any required delivery or shipping of this item will incur additional costs, which can be requested individually depending on the place of delivery and scope of supply.

Condition: excellent (used), 4 kW motor 4 knives Table length: 254 cm Dcjdpfxoyy Stcs Aqvep Table width: 52 cm

Condition: new, Technical Data for the Shelf Panel: Shelving System: Meta Type: Clip Dcedpfx Asy H Hkpoqvsp Scope of delivery includes: 01x Shelf panel, used Shelf designation: MS150-III Material finish: Sendzimir galvanized Dimensions: 1,000 x 500 x 40 mm Weight: 3.41 kg/piece Maximum load per shelf: 150 kg, with evenly distributed load. 04x Shelf support brackets 40 mm, used, galvanized silver, suitable for steel shelves with 40 mm upturned edge Finish: Zn blue + therm 4h, galvanized Color: Silver Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested individually depending on the delivery location and scope of delivery.

Condition: good (used), Technical Data for Shelf Rack System: Racking System: SSI Schäfer Type: R 3000 Technical Data for Installation: Number of rack rows: 01 pc. Rack length: 4,920 mm Number of bays per rack row: 03 pcs. Scope of delivery includes: 04x shelf rack upright frames, used Material finish: sendzimir galvanized Version: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimension: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Including cross beam and base plates (upright frames are pre-assembled) 2,490 mm high 600 mm deep Dodpsy E S Htofx Aqvscp 18x shelves, used Material finish: sendzimir galvanized for frame depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / piece: approx. 8.12 kg Max. load per shelf 75 kg, with evenly distributed load. 72x shelf supports, used Suitable for plain uprights Material finish: sendzimir galvanized 01x cross brace, used Type designation: KV31313 Weight / piece: approx. 0.405 kg / pc. Material finish: sendzimir galvanized 01x load sign Including information on bay and shelf load, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Any additional shipping or transportation of this item is subject to extra costs, which can be provided upon request depending on the delivery location and/or scope of delivery.

Condition: used, axle configuration: 3 axles, first registration: 12/2003, color: other, Year of construction: 2003 Empty weight: 6.500 kg Axle 1: left 10 mm right 16 mm Axle 2: left 10 mm right 10 mm Dedpfx Aqex Elfijvscp Axle 3: left 10 mm right10 mm We have the possibility to stack trailers! 

Condition: excellent (used), Catalog number: 7672 TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for shredded wood: diameter 160mm - Rotor working width: 980mm - Main motor: 18.5kW - Number of knives: 24 pcs - Knife dimensions: 30x30mm - Screen: 20mm - Pressure plate Dcsdpfx Ajzxhfcoqvep - Electric auto-reversing - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approximately 2500kg ADVANTAGES - German-made - Auto-reversing - Pressure plate - Very good condition - Used wood chipper Net price: 85,900 PLN Net price: 19,977 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: used, Cryogenic gas tank semi-trailer CRYOBASE used for liquid oxygen, nitrogen and argon Dcodpfx Aeznb Nyjqvsp Capacity: 24 m³ Date of first registration: 29.09.2025 Pump, flow meter, vaporizer, vacuum insulation. New technical inspection (HU), vacuum and leak test. We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail

Condition: used, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 / Multifire – 99 kW biomass boiler Used Austrian boiler with KWB Comfort 3 controls, output modulation, lambda and negative-pressure control, automatic heat exchanger cleaning and ash extraction. Technical data: - Nominal heat output: 99 kW - Minimum output: 27.6 kW Dcsdpfozhh Iiex Aqvop - Fuel input: 113.9 kW - Water capacity: 167 litres - Maximum operating pressure: 3.5 bar - Maximum temperature: 90 degrees C - Weight: approximately 997 kg - Flue connection: 200 mm - Operating hours: 30374 h Data plate specifies 6 mm wood pellets. Wood chip operation depends on the installed extraction and conveying equipment. Exact equipment and scope of delivery by arrangement. Located in Mosonmagyaróvár, Hungary. Inspection by appointment. Transport, installation and commissioning by the buyer.

Condition: excellent (used), Year of construction: 2003, Wood chipper Manufacturer: Weima Type: WL 4 Year of manufacture: 2003 Operating hours: approx. 1,244 h Power: 18.5 kW Dcodpjz Ai N Refx Aqvjp Hopper: 600 x 800 mm Rotor diameter: 252 mm Screen diameter: 15 mm Number of knives: 14 Rotational speed: 90 rpm Weight: 1,300 kg

Condition: new, Siemens certificate 6AU1820-0AA44-0AB0 Technology Option MultiAxes Package for D445/D445-1/D445-2/D455-2. Unused, 100% functional, scope of delivery as per photos. Dcjdpfx Aqezzhruovsp

Condition: excellent (used), Plockmatic 350 Booklet Maker, Trimmer and Square Fold!! Off-line or Ricoh C7100 / C7200 Ricoh Pro 8100 / 8200 Dsdpfx Ajd Thb Ieqvjcp Ricoh C9100 / C9200

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 22 kW Dcodpfx Ajhwwpzoqvop ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x14 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 1446 x 1342 mm ✔ Dimensions L/W/H: 1,92/1,55/1,79 m ✔ Weight: 1750 kg 2 years warranty or 2000 working hours

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Dcodpfogw Sxzsx Aqvop Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We offer you 10 new locking pins for sale here. - including shipping throughout Germany - The scope of delivery includes: 10x locking pins, new Material color: fully galvanized Application: universally applicable Head diameter: 9.74 mm Pin diameter: 4.90 mm Weight: 0.007 kg / piece For securing the longitudinal beams against unintentional lifting Our services at a glance: (Prices on request) Dcedpogqa T Ijfx Aqvep Assembly, installation our general assembly conditions apply Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all rack systems Delivery with our own fleet (without unloading)

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 Dcsdpfxjiq U A Se Aqvsp ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) ✔ Filling opening: 939 x 567 mm ✔ Dimensions L/W/H: 1,88/1,12/1,67 m ✔ Weight: 1250 kg 2 years warranty or 2000 working hours

Condition: good (used), The scope of delivery includes: 02x Shelf uprights, used Material color: Sendzimir galvanized Upright profile: 85 x 75 x 2.00 mm Upright height: 1,455 / 1,300 mm Upright depth: 1,100 mm 04x Shelf crossbeams, used Material color: orange Beam profile: 120 x 50 mm Clear span: 2,700 mm 08x Locking pins, used Design: fully galvanized 03x Wire mesh grating, new Material color: Sendzimir galvanized Design: laid-on shelf grating, beveled on both sides Depth: (direction of supporting bar) approx. 1,125 mm for upright depth: approx. 1,100 mm Clear span: approx. 965 mm Width: approx. 885 mm Crossbeam support: approx. 65 mm Mesh size: approx. 95 x 45 mm Wire thickness: approx. 4.5 mm Maximum load capacity: up to 800 kg with evenly distributed load 03x Trapezoidal sheet metal, 2nd choice Exterior color: RAL 8012 reddish brown Interior color: similar grey-white Sheet length: 1,500 mm Sheet width: 1,075 mm Cover width: 1,035 mm Profile: 35 / 207 Dcjdpfedvgxisx Aqvop 01x Verge angle, new Length: 3,000 mm Material color: RAL 8012 reddish brown Size: 100 x 100 mm Thickness: 0.75 mm Design: 90° bent 25x Screws 5.5 x 40 mm A2 Max. drilling capacity: 13 mm with 16 mm sealing washer, drill tip and ETA-13/0183 approval 06x Screws, 4.8 x 20 mm galvanized, self-tapping for wooden substructure Technical data for the firewood storage: Total width: approx. 2,900 mm Total depth: approx. 1,515 mm Total height: approx. 1,535 mm Storage volume: approx. 3.15 m³ Information: The images are example images to illustrate the construction. The material color of the shown uprights and crossbeams may differ. General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 1,056 mm Number of bays / shelf row: 01 pcs. á 994 mm Number of levels: 11 pcs. The scope of delivery includes: 02x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are pre-assembled 2,278 mm high 300 mm deep 11x shelf, used Material color: sendzimir galvanized Dimensions: 994 x 300 x 30 mm Weight per unit: approx. 3.18 kg 60x open fronted storage boxes, second-hand Manufacturer: SSI Schäfer Type: LF 221 GZW Color: red Design: recessed grip in the front Material: Polypropylene External dimensions (WxDxH): approx. 150x 235 x 122 mm Internal dimensions (WxD): approx. 125 x 185 mm Usable height in stack: approx. 110 mm Stackable: yes Weight per unit: 0.220 kg 02x Side panel, used Designation: SWI 3422 Material color: sendzimir galvanized Dimensions: 2,275 x 175 mm 01x Cross brace, second-hand Designation: KV31013 Material color: sendzimir galvanized Djdour Idrjpfx Aqvecp Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Year of construction: 1996, CRYOLOR gas tank semi trailer for oxygen, nitrogen, argon cryogenic Dsdpfx Aqou Uni Sjvocp Year: 1996 We also have other tankers, tanks, vessels for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane We will be glad to answer your questions via Phone and E-mail

Condition: used, functionality: fully functional, Cantilever/sliding shelving system on rails, 4-row configuration 5 arms / 6 shelves with shelf dividers per row Floor rail guidance, movable via hand crank and therefore space-saving. Sturdy steel shelving for storing long materials/profiles. Dodpoz Iywgjfx Aqvjcp Dimensions per shelf unit: W 120 cm x H 240 cm x D 570 cm, length of floor rail: 700 cm Sold as a complete set only. (*Sale excludes profiles) Location: Nuremberg/Krottenbach Inspection appointment: by arrangement VAT: shown separately

Condition: used, functionality: fully functional, Solid Wood Press for Sale! Dodpfx Aqsz Azqtovscp Manufacturer: Societa Italiana Macchine Idrauliche, Milan (Italy) • 5 hydraulic cylinders at the top • 4 hydraulic cylinders at the bottom • Working area: approx. 2.5 x 1.3 m • Mechanical/hydraulic control (no automation) • Good visual condition; well-maintained. FULLY FUNCTIONAL ✅

Condition: used, first registration: 03/2017, color: other, 89002 Auxerre Cedex, Jean Mermoz Avenue 24 - 28 Dcedpfx Aqez Ix Tgovep Fruehauf Company = Further information = Number of owners: 1 Damage: none Weight: 6660 kg = Further information = Year of manufacture: 2017 Unladen weight: 6,660 kg Payload: 31,340 kg GVW (Gross Vehicle Weight): 38,000 kg Damage: none

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, This vertical machining center, including the "Clamex unit," is for sale and has only a few operating hours. The machine is being sold because we have switched to a nesting machine. In 2021, the machine was upgraded with a more powerful vacuum pump (16.3 m³). The machine also includes various vacuum clamping devices; we purchased several larger plates in addition to the standard equipment. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. clearance) Material thickness: Z = 8 to 70 mm Max. contour milling dimension in the X-direction without clamping: X = 1500 mm Max. contour milling dimension in the Y-direction: Y = 985 mm ./. milling cutter radius Max. drilling dimension horizontally in the X-direction: H = 1168 mm Z-axis travel: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling head 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, continuously adjustable with collet chuck with HSK shank, ceramic ball bearings (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic Max. Ø tool: Ø 110 mm Maximum tool weight: > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position aggregate magazine, swiveling in X and Y direction, only for special bevel gear 7869 with HSK holder Vertical spindles can be individually activated Arrangement in L-shape, 5 in X and 4(5) in Y direction Dedpoz In Ugsfx Aqvocp 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: Alternating clockwise/counterclockwise n(max.) 1000 - 4400 min-1, continuously adjustable Holder: M 10 thread - interference fit 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Holder: M 10 thread, interference fit 11 mm Total drill length max. 63 mm from the mounting end without tool, without holder Sawing unit Integrated sawing unit for sawing/grooving in X direction n(max.) 1000 - 5650 min-1, continuously adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4.0 mm 4-axis "CLAMEX" tool set - Includes original tool set consisting of 2 pcs. P-system grooving cutter, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling mandrel for P-system grooving cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling mandrel for P-system grooving cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P L= 57.5 / shank 10x27 / left 1 pc. Adapter for drill with shank d= 10 mm (left) 1 pc. Collet DIN 6388 form B, double slit, size 25 Clamping diameter 20, for HSK-F 63 holders Drilling unit: Drill Ø5, 6, 8 mm 35mm pot band 20mm countersink Drill horizontally + vertically: 8mm Milling cutters: 8mm Dia NL32mm 16mm Dia NL43mm 16mm Dia NL9mm 20mm insert NL55mm