Used Semiautomatic Gluer for sale (125)

Condition: new, 36/72 m/min 285 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: square 220 mm capacity 90 degrees: round 250 mm capacity 90 degrees: flat 280x220 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 140x100 mm capacity 45 degrees: round 230/200 mm capacity 45 degrees: square 200/170 mm capacity 45 degrees: flat 220x200/200x140 mm total power requirement 1,5/1,8 kW Weight 485 kg Overall size 1970x1150x1840 mm Semi-automatic function: Nkedpfx Agjyv Narjwow - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Upper position is saved automatically.

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm Nkodpfx Agsyv Iqvswew 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: CE marking, documentation/manual, Mep Bandsaw Model Shark 332-1 Type Sxi Evo Semiautomatic Maximum Vice Opening: 335 mm Blade Dimensions: 3650 x 27 x 0.9 mm Equipped with Electronic Scale Nsdpsyv Hl Eefx Agwjkw Used Machine Internal Code: Svr398

Condition: used, Year of construction: 1998, The Mueller Martini Prima Amrys from 1998 is a fully equipped and highly efficient saddlestitcher, featuring 7 feeders, a cover feeder, inserting machine, labelling section, and a card gluer. It includes the Automatic Make Ready System (AMRYS), a three-knife trimmer, a Mueller Martini 227 inserting machine with 4 stations, and other optional components as Inkjet unit, and Mosca RO-TR-500. It reaches a maximum mechanical speed of 13,000 cycles per hour and handling sizes from 90 x 105 mm to 320 x 480 mm. Format: 320 x 480 mm Equipment: Nksdpjwcqygefx Agwow Equipment Feeder Number of feeder: 7x 370 Cover feeder: 1x 1529 Card gluer: Yes Stitching unit Type: Prima Amrys 2x stitching heads AMRYS - Automatic Make Ready System Three knife trimmer Type: Mueller Martini 360 Delivery Type: Mueller Martini 310 CS-20 Serial number: 97.00900.05 Delivery direction: to the right Optional (available on request) Stacker InkJet System Wrapping unit Mailing & Sealing Machines Inserting Machine Type: Mueller Martini 227 Number of stations: 4x Technical Details Size min: 90 x 105 mm Size max: 320 x 480 mm Mechanical speed max: 13,000 cycles/h

Condition: excellent (used), Hydraulic with semiautomatic cycle Nkjdpfxoylbhxj Agwsw Internal grinding diameter 5-200 mm Grinding depth 250 mm Workpiece spindle head center height 180 mm Spindle bore 50 mm Table travel -600 mm Misc. accessories MARCELS MASCHINEN AG

Condition: used, This listing is for a Hamilton Microlab 500 Syringe System. The unit is in full working condition and is ready for immediate release. The Hamilton MICROLAB 500 is a versatile, semiautomatic, precision liquid processor. MICROLAB 500 function as either single- or dual-syringe diluter/dispensers. The MICROLAB 500 functions on the principal of liquid/liquid displacement. At the heart of each MICROLAB 500 system is a highly efficient, precision stepper motor drive that is combined with world-famous Hamilton GASTIGHT syringes. The result is a precise and accurate instrument that is very easy to set up and use Nkodpfjxxx Iuox Agwjw

Condition: like new (used), Make: IMC Type: 1 head automatic Model: 478 Capacity: Up to 3,600cph Direction: Left right Frame: Mild steel, paint-coated Dimensions: L x H x W = 1200 x 1300 x 2100mm Weight: 1000Kg Power-supply: 380V+N+E, 2Kw Tooling: 1 set for 153mm tin-can, Features: With Stainless steel infeed conveyor / infeed screw on Stainless steel support Make: Ocim Type: semiautomatic table model ROPP closing machine Model: Super Ermetica Capacity: up to 600 per hour depending on operator Frame: steel painted Dimensions: L x B x H = 1.000 x 700 x 1.700 mm Weight: 150 kg Power-supply: 380 Volt – 50 Hz – 0,37 KW Njdpfsh I Nr Rox Agwokw Tooling: 28,5 mm as-is or adjusted to customer needs

Condition: new, Year of construction: 2023, REF: MM5675 Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Electric supply - 220 V / 50 hz / 1 phase. Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Nkedjr I Ddkopfx Agwew Purchased brand new in 2023 but never used.

Condition: good (used), Schmedt PräLeg HHS 1805 Case in machine This machine is in very good condition. Manufactured by Schmedt, Germany. The machine suspends book blocks into pre-cut hardcovers. Two gluers with smooth glue thickness adjustment. The machine comes with full documentation and a CE certificate. Nodpfx Asynfxtegwekw Format: Block height: 80–340 mm Block width: 110–450 mm Block thickness: 2–80 mm Capacity: approximately 200–300 pcs/h Power supply: 230V + compressed air. Weight: 300 kg

Condition: ready for operation (used), Year of construction: 2008, Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible. Nkodow Na Hbspfx Agwsw

Condition: used, Year of construction: 1995, functionality: fully functional, total width: 900 mm, total length: 1,300 mm, shelf height: 900 mm, total height: 900 mm, load capacity: 1,000 kg, Automatic pallet racking system by Mannesmann Demag Fördertechnik AG Solomat 1010 from 1995 with upgraded Siemens Semiautomatic SIMATIC HMI control from 2024. Njdpfxoykz Dks Agwokw Travel speed: 115 m/min Lifting speed: 23 m/min Extension speed: 87/50 m/min

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Nedpfxeum Hufe Agwokw Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Year of construction: 2013, condition: ready for operation (used), A complete filling, sealing, inspection and labelling line is available, includes (1) Tray Destacker Carsoe, year of construction: 2013 (2) Volumetric Filler Lieder/Robot Food Technologies AWF 2, year of construction: 2015, with lifting and tilting device for loading, suitable for free-flowing, non-sticky and low-liquid-content products (3) Tray Sealer Multivac T700, year of construction: 2012, suitable for closing prefabricated trays, bowls and cups, evacuating, gassing and sealing (4) Covering Machine Buhmann Servolid 400, year of construction: 2012 (5) Labeller Multivac MR300/400, year of construction: 2012, with two integrated TTO printers Videojet, suitable for labelling trays from above and below (6) Metal Detector Mesutronic, with automatic rejection for bad packs (7) Tray Packer Somic 424DT, year of construction: 2013, output: 15 cartons/min (8) Hot-Melt Gluer Nordson, printer for printing trays from REA Jet in the outfeed of the machine, has been serviced regularly, including documentation and spare parts. Nsdpfx Asi Atnxjgwjkw

Condition: new, Year of construction: 2025, Semiautomatic multi-product filling station equipped with precision balance. The operator positions the empty bag under the bag-holder and the bagging machine fills it quickly and with maximum precision thanks to the automatic weighing system. The product is extracted from the hopper via a conveyor belt driven by a gear reducer. Wide mouth hopper for easy filling with mechanical shovel or other system. Side and rear couplings for forklift forks to facilitate transport.       Specification bagging machine with hopper ARK01: - Bagging capacity 3-4 tons / hour - Hopper capacity 2 m³ (heaped) - Overall dimensions L 210cm x L 260cm x H 225cm - Total weight is about 400 Kg - Precision weighing +/- 100 grams - Possibility to prepare bags from 1 to 50 kg * -Wiring for power line connection - Manual tilting gate to regulate the quantity in outflow - Vertical tilting scale support to adjust the height based on the bags used - Command hospital Nksdod Nqvnepfx Agwjw - 400V three-phase power supply - Instruction manual - Made in EU

Condition: used, EUROLINE EL 310 / Euro-Inline 310 E Lead Edger feeder N 2 top printing units Automatic slotter with pre set Nsdpfx Ajyhp Sqsgwokw Rotary Die cutter units Folder Gluer Boundle system 3100x 1250 (1650 with skip feed)

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Nedpfjyr Awbjx Agwokw Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: used, Year of construction: 2002, machine/vehicle number: BM5008, BM%==( Manual operation Hot-melt gluer for book spines Nkjdpsh S Drgefx Agwjw spine milling station for books H440xW280xT40mm

Condition: excellent (used), Year of construction: 2009, Perfect Binding Line, consisting of: Gathering Machine ZU 841.A - basic frame with 21 gathering stations - 19 standard feeders - 1 handfeeding station (covering 2 housing stations) - device for electrostatic fixation of three advertising medias - integrated jogging station - Aircenter - reject unit AS 841 to the right - transfer channel as connecting unit to the binder Perfectbinder KM 473 - 26 clamps - handfeeding - main milling station - equalized milling station - notching station Njdpfevg Ad Tjx Agwokw - micro-notching station - brushing station with roller brush - 2 Hotmelt spine gluing units - 1 Hotmelt side gluing unit - 3 premelters LH 375 - IR heating at curve - stream cover feeder SAL 411.A - scoring station for 4 scores - 2 pressing stations - gripper carriage delivery - laydown device Transport and Drying Line, incl. Ambaflex drying tower, incl. emergency delivery Three Knife Trimmer HD 153.P - copilot - right hand infeed - counter stacker - silicon spraying device - standard cutting cassettes 7 - 18 additionally available: Kolbus book block feeder with delivery belt Kolbus card gluer KK 841 PUR spine gluing unit with Nordson smelting unit Best for PUR cover 600L Kolbus destacker AE 360 Kolbus blocking unit VB 120 pallettizer Kolbus PL 770 or Kolbus PL 771

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, Equipment: type plate available, BENHIL 8380 Butter Packaging Machine (used) - Manufacturer: BENHIL - Model: 8380 - Machine type: Butter and Margarine Packaging Machine - Condition: good - Completely overhauled in 2019 - Capacity: up to 4,800 units/hour - Formats: 250 g and 125 g - Includes BENHIL 8538 Carton Packer Nkedpox R Dn Hsfx Agwow - Includes GIGANT Carton Sealer (automatic gluer) - Proven BENHIL quality - Ideal for industrial butter processing For sale is a used BENHIL 8380 butter packaging machine in good condition. The machine underwent a comprehensive overhaul in 2019 (list of replaced parts available upon request) and is maintained both technically and visually. The system achieves an output of up to 4,800 packs per hour and is designed for butter formats of 250 g and 125 g. The BENHIL 8380 is renowned for its high process reliability, precise portioning, and consistent packaging quality – even in continuous operation. Thanks to its robust construction, this machine is ideally suited for industrial use in dairies and butter processing plants. It offers proven technology, user-friendly operation, and a long service life. Further information, photos, and on-site inspection available upon request.

Condition: used, Göpfert Flexo-Folder-Gluer / Flexo-Printer-Slotter line, model EUROLINE EL 310 / Euro-Inline 310 E The machine is designed for the production of corrugated packaging and combines printing, creasing, slotting, folding, and gluing in a continuous inline process. It is highly suitable for medium to large production runs and offers a robust industrial construction with versatile automation features. Comprising: - Feeder - Flexo printing units (2 units) - Slotting unit (motorized/SLM) - Rotary die-cutter - Folding/gluing section - Pre-set function Nodpfjx Thxzox Agwskw - Strapping machine

Year of construction: 1979, condition: used, saw blade diameter 450/500 mm Nkodpfx Agoilfp Njwsw cutting diameter mm stroke mm total power requirement 3,6 kW weight of the machine ca. 1130 t dimensions of the machine ca. m - Circular saw - semiautomatic - hydraulic

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Year of manufacture: FKM 1997, overhauled 2020 Year of manufacture: Automatic packing machine 1985, overhauled 2020 Location: 41751 Viersen, North Rhine-Westphalia Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Nedpfornkwrex Agwokw Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Availability: Immediately We look forward to your inquiry. Your WS Quack + Fischer Team

Condition: good (used), functionality: fully functional, Complete plywood manufacturing line including: 1 BUERKLE compounding line year 1991 with BUERKLE roller gluer length 3400 mm + 1 OLM long-wire sender + 1 OLM cross-wire sender + 1 assembly table. 1 press loading basket with 10 positions. 1 BVH 10-stage press with thermal oil heating platens. - Platen size: 3700 x 1900 - Platen thickness: 40 mm - Opening between platens: 75mm - 1 central cylinder D700 mm, max. hydraulic pressure 315 Kg/cm². 1 press unloading basket with lateral evacuation pushers on lifting table. Nodpfx Aoul Uizegwjkw Line currently in operation, available second half of 2025.

Condition: new, functionality: fully functional, Practical – ready for immediate use without instruction. The devices are ready for operation after just 5 minutes of heat-up time. The integrated temperature controller allows stepless adjustment of the heat as needed – ensuring the optimal melting temperature for the adhesive thread. The pressure applied with the hand gluer is sufficient to firmly press the adhesive thread onto the veneer sheet. Nksdpfsxdxlkox Agwow Key advantages at a glance - only approx. 5 minutes heat-up time - precise, straight-line bonding - clean thread separation - maintenance-free Item no. 0132772

Condition: new, Year of construction: 2025, semiautomatic bag in box filling machine, with weighingframe, stainless-stell-buffer tank mounted on chassis filling capacity 900 l/h (with 10L bags) Nedpfx Ajygaxjgwskw