Used Screw Pressing Machine for sale (69,618)

Condition: used, Year of construction: 2016, functionality: unexamined, power: 4 kW (5.44 HP), type of cooling: air, Equipment: type plate available, Used Atlas Copco GA132VSD variable speed screw compressor. Synairgies reference: 21786. Year of manufacture: 2016. Nsdpfx Ajzlxxmekielh Maximum operating pressure indicated on the nameplate: 8.5 bar. One unit available in Montigny-en-Ostrevent. Photo of the machine and its nameplate attached. Sold as is. Price upon request.

Condition: used, Year of construction: 1981, National 2-3 Hot Former Nljdpfx Aowl Iw Uokijh induction heater, feeder, straightener

Condition: excellent (used), Year of construction: 2016, AIDA Press DSF-M2-6300(D1)-305-150 Servo drive Year of manufacture 2016 Press force 6,300 kN Stroke rate 1-50 (75) 1/min Stroke 350 mm Installation height 800 mm Ram adjustment 300 mm Table area 3,050 x 1,500 mm Nedpfe Afzplex Akielh Ram area 3,050 x 1,500 mm Coil strip feeding system Strip width 100-800 mm Strip thickness 0.6-6.0 mm Coil capacity 5,000 kg

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 48 mm, total length: 75 mm, metric thread diameter (min.): 2 mm, metric thread diameter (max.): 6 mm, Ingramatic RP 1 # 451 1984 Nljdey D Nghopfx Akish 230-600 pieces 2.5–6 mm Blank length: 4–75 mm Thread length: 48 mm Tool dimensions: 95/85x25x48 Power: 12 kW

Condition: like new (used), Refurbished stainless steel dosing screw, auger, filling machine, screw dosing Coarse and fine dosing Screw flights can be quickly disassembled for cleaning Nodpfswygbbsx Akijlh Motor power 1.1 kW and 0.75 kW See our other listings VMA

Condition: used, Year of construction: 1970, pressure 1 t Nljdpfsv Td Erex Akish Stroke 315 mm

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Nljdpfxozpxhio Akijh Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1968, Hilgeland ME2 VM trimming press for sale. Nledjur N Ewspfx Akioh

Condition: good (used), K-Tron dosing machine, dosing screw, weighing filler, dosing unit Type: T-35 Incl. scale with control system and display (functionality unknown) See our other advertisements VMA Wekerom Nsdpowyf Iaefx Akielh

Condition: excellent (used), Year of construction: 2013, Ref:11118 . 2013 Schmedt Präleg & Präform Casing-in & Pressing Machines. For casing-in a variety of thin to thick books into flexible or hard cases. Special features:- • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks Working in conjunction with:- 2008 Schmedt Präform 2100 Pressing & Joint Forming Machine. For pressing a variety of thin to thick hard cover books immediately after casing-in. Suitable for single or assorted books, pressing & burning in the joint in a single operation. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Specification, PraForm 2100 Book press with groove cutter. Nlodpszkgdzefx Akioh Maximum format: 420 x 520 x 100 mm Power supply: 230 V + compressed air.

Condition: used, Year of construction: 2018, functionality: fully functional, total length: 120 mm, total width: 800 mm, power: 15 kW (20.39 HP), pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser SK25T screw compressor SIGMA Control 2 compressor control system Equipped with ABT25 refrigerant dryer Operating pressure: 11 bar A suitable, used pressure vessel with a volume of 1000 liters is also available as an option. Nodpfs Afc Dkjx Akiolh

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Njdpfx Aez Snchjkiolh Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: reconditioned (used), functionality: fully functional, Drilling and pressing machine for all types of furniture fittings, rows of holes and Nljdpfx Akjumw Sboioh hole group drilling machine in system 32 Power connection 400V 0.75kW Spindle speed 2800 rpm Stop ruler 960 mm 2x swivel stop for drills with shaft diameter 10 mm Workpiece thickness max. 40 mm 1x 7-spindle drilling head for row of holes, pitch 32 mm with integrated pins Manual feed Base at an additional cost Olive drilling head €450.00 Mepla drilling head with pressing die €550.00 Hettich drilling head with pressing die €550.00

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS MANUFACTURER AND MODEL Manufacturer: REYER Machine type: Spindle press WORKING AREA Table dimensions: 650 × 550 mm Flywheel diameter: approx. 2,000 mm MACHINE DETAILS Nledpfe Adzh Esx Akijh DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 2,000 mm Height: 2,200 mm Weight: 700 kg

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg Nlsdjyzzh Espfx Akioh SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Njdpswbvmiofx Akiolh Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, Year of construction: 2019, machine/vehicle number: div., functionality: fully functional, 2x ROLLEX ironing presses, for pre-ironing (PRE-IRON); working width: 2.25 m, Washing machine / dryer set Washing machine Milnor; load capacity: 65 kg; year: 2004 + Dryer Kannegiesser; load capacity: 50 kg; year: 2005 Nlsdewpi Rkepfx Akioh + Dryer Passat; load capacity: 50 kg; year: 1984

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 84KB2, Progressive header SACMA SP.240 Fully functional, operational, ready to produce Available for any test Technical information: Number of dies: 3 Heading tonnage: 550 KN Maximum cutoff diam (500N/mm²): 10,5 mm. Max. cutoff length: 85 mm. Kickout stroke die max.: 65 mm. Kickout stroke punch max.: 20 mm. Speed pcs. per minute: 275 Power of main motor: 22,5 KW Diam. dies: 54 mm. Length dies: 90 mm. Diam. punches: 38 mm. Net weight: 10.600 kg. Gross weight: 12.300 kg. Condition: very good, operational Year: 1990 Ready for immediate delivery Machinery runs without any problems. Nlsdpfsy Nx Hbox Akijh Available c/o HBR srl - Calolziocorte (LC) Italy

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Nledpfx Aomck Ryekijh Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: excellent (used), Year of construction: 2019, operating hours: 2,092 h, functionality: fully functional, machine/vehicle number: IT J320209, overall weight: 447 kg, total length: 1,935 mm, total width: 655 mm, total height: 1,680 mm, volume flow: 270.122 m³/h, operating pressure: 13 bar, pressure (min.): 5 bar, pressure (max.): 13 bar, noise level: 64 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in excellent condition!!! The electronics have been completely replaced!!! Only 2029 operating hours. For sale due to downsizing of the machine park!!!!...Completely overhauled, including filter replacement. Nsdpfxoz Ah Uxe Akiolh

Year of construction: 2017, condition: used, Manufacturer : Transvis Type: Semi-automatic cap screwdriver Application: screwing / capping Year: 2017 Maximum product dimensions: Ø 54.5 x 82 mm Minimum product dimensions: Ø 45.5 x 68 mm Product weight: 90–150 g HMI control panel Asynchronous motor power: 0.18 kW Two-hand control Nodpfsy H Rfqex Akielh Torque control Overall dimensions: 650 x 1000 x 1800 Screw capper dimensions: 650 x 935 x 990 Weight : 100 kg Spare parts and formats available Power supply: 220V single-phase / 6 bar compressed air Technical documentation available Video available in running condition

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, Very well-maintained double-pressure press DM2 by Heuer Hammer. Immediately ready for use. Nljdpfx Ajxywkwokish

Condition: new, functionality: fully functional, NEW CT-400 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 5 tons/hour (8-10 m3/h) - Motor: 30 kW / 40 HP - 480V, 3-phase (440V compatible) - Screw speed: 20 RPM - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) Nljdps Adyk Sefx Akijh - Discharge cone: hydraulic or pneumatic adjustable back-pressure - Footprint: 177 x 39 x 79 in - Weight: 7,050 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: used, Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, overall weight: 105 kg, power: 3 kW (4.08 HP), pressure (max.): 10 bar, ambient temperature (max.): 40 °C, Equipment: documentation/manual, type plate available, Atlas Copco GX4P EP screw compressor Nljdpfxe Afc Nmo Akieh Operating pressure – 10 bar 2200 operating hours A suitable, used pressure vessel with a volume of 1000 liters is also available as an option.

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Year of build 1970 Serial number 5282 Electric connection 380V Dimension l 5500mm Dimension w 2200mm Njdpfxju Szuco Akislh Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm