Used Schuitemaker Rapide 160 for sale (8,586)

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Hnodpfjxl Elgox Afnsh

Condition: ready for operation (used), Year of construction: 1961, A Niehoff slide-free drawing machine is available. Processing diameter: 5mm-15mm, drawing speed range: 6m/min-24m/min, gearbox: manual gearbox, machine dimensions X/Y/Z: approx. 2600mm/2200mm/4000mm, weight: approx. 6500kg. The gearbox was completely overhauled in 2019 with new gears and new bearings. A new external lubricating oil pump was also installed in the same year. Documentation available. On-site inspection is possible. Hnsdpfx Afowq R N Roneh

Condition: ready for operation (used), Year of construction: 2011, A Jumag steam generator including a Weishaupt burner is available. 1) Jumag DG 360 rapid steam generator, year of manufacture: 2011, volume: 60l, test pressure: 12bar, max. operating pressure: 13bar, max. temperature: 220°C, max. firing capacity: 245kW. 2) Weishaupt WM-G10/1-A Monarch burner, year of manufacture: 2011, capacity range: 65kW-310kW, connection pressure range: 15mbar/500mbar, gas type: bio. The system was in operation for only 3 years. Documentation available. An on-site inspection is possible. Hnodpfx Aexd Au Aefnoh

Year of construction: 2018, condition: ready for operation (used), Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible. Hnedpfx Ajviv Azjfnsh

Year of construction: 1978, condition: ready for operation (used), A Dörries CNC vertical turning lathe is available. Faceplate diameter: 1600mm, turning diameter: 1800mm, turning height: 1500mm, max. travel: 1200mm, faceplate speed: 200rpm. Machine dimensions X/Y/Z: approx. 8400mm/4500mm/5300mm, weight: approx. 25000kg, control system: R&D. The machine’s electrical system and control were completely overhauled in 2010 by R&D Steuerungstechnik. Documentation available. An on-site inspection is possible. Hjdsxq Ex Dspfx Afnjnh

Condition: good (used), The machine is designed for approx. 160 kg of dough and kneads it with timers in 2 different gears. Hnjdpfevpagwjx Afneh

Condition: good (used), Year of construction: 2008, feed length X-axis: 575 mm, feed length Y-axis: 90 mm, feed length Z-axis: 300 mm, Order No. 3.2-115 1 used CNC Lathe GILDEMEISTER type CTV 160, built 2008 1 used CNC Lathe GILDEMEISTER type CTV 160, built 2008 Siemens 840D control 3-jaw chuck Chip conveyor Coolant device Siemens 840D control 3-jaw chuck Coolant device Chip conveyor Technische Daten / technical details: Drehdurchmesser / turning diameter 160 mm X / x 575 mm Z / z Y/y 300 +-90 mm mm Drehzahlbereich / spindle speed range 6000 UpM / rpm Hnsdeubvv Tepfx Afneh Weight of the machine ca. / weight ca. 6000 kg Technical data, accessories and description of the machine are not binding. Technical data, accessories and description of the machine are not binding.

Condition: good (used), 3-jaw chuck Multifix tool holder device tail stock Technische Daten / technical details: Hsdpfxjig H Hwo Afnjnh Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 190 mm, turning diameter: 330 mm, center width: 650 mm, 3-jaw chuck tool holder device tail stock Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Hnodpfx Afowtx A Denoh Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Year of construction: 2006, condition: good (used), CNC control Sinumerik 810D 12-fold revolver bar loading device Breuning Irco Simag 42.1R (max. bar diameter 42mm) chip conveyor tail stock Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 550 mm max. Drehdurchmesser / max. turning diameter 300 mm max. Drehlänge / max. turning lenght 300 mm X-Weg / X-travel 170 mm Z-Weg / Z-travel 335 mm max. Stangendurchlass / max. bar diameter 45 mm Drehzahl / spindle speed 6000 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X / rapid feed X 36 m/min Hnsdpfslfdazjx Afnoh Eilgang Z / rapid feed Z 36 m/min. Antriebsleistung / drive capacity 20 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-pressure cleaning device, high-pressure flushing device, high-pressure built-in flushing device on hot-dip galvanized and painted high-quality steel frames with forklift lugs suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no finishing time & jib, Karo, Leistikow, Müller, Rioned, Rockstrah, Rom, Rowo,... The following models are available: Whale 36/210 | 36l/min at 210bar | Engine: Honda GX630 14,7kW Whale 43/180 | 43l/min at 180bar | Engine: Honda GX630 14,7kW Whale 55/160 | 55l/min at 160bar | Engine: Honda GX690 17,7kW DIMENSIONS / WEIGHT: dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm empty weight without water tank : approx. 250 kg Dimensions and empty weight with 300 l water tank: approx. 1.160x1.000x1.030 mm and approx. 280 kg Dimensions and empty weight with 500 l water tank: approx. 1.260x1.000x1.030 mm and approx. 300 kg HIGH PRESSURE PUMP: Manufacturer: COMET Hjdjdqmttjpfx Afnenh Model: TW 13022S Premium MOTOR: Manufacturer: Honda Model: GX 690 Fuel: petrol Cooling: Air Cylinders: 2 Displacement: 688 cm³ Max power: 24 PS (17.7 kW) Max engine speed: 3,600 1-min. TRANSLATION: Gearbox CONTROL PANEL: ignition key Operating hours counter Electronic fuel gauge LED display for low pressure of lubricating oil Emergency stop button INSTALLED ALARM: Low-water protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: The device is equipped with a safety valve, a D [...]

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 6,000 rpm, spindle motor power: 11,100 W, overall weight: 3,500 kg, controller manufacturer: FANUC, controller model: 0i-T, number of axes: 2, This DAEWOO Puma 160 was manufactured in 2004. A robust horizontal turning machine featuring a Fanuc 0i-T control system, it supports a turning diameter up to 160 mm and a length up to 250 mm. With a spindle speed of up to 6000 rpm and a main motor power of 11.1 kW, it's ideal for precise operations. Machine weight ranges from 3,000 to 3,500 kg. Contact us for more information about this machine. Additional equipment • Included in the offer: A set of tools. Machine Benefits Hnedpfx Afoyar Eqonoh Technical Machine Benefits • Turning diameter: up to 160 mm • Turning length: up to 250 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, Eccentric Press - Single Column Manufacturer: ZTS Kosice Model: LEK 160 Year of manufacture: 1991 Capacity: 1600 kN = 160 tons Throat depth (vertical distance from ram axis to the front face of the frame in the working area): 355 mm Shut height (distance between table and ram surfaces in bottom dead center): 455 mm Adjustable stroke: 25 - 160 mm Working stroke: 5.3 mm Ram adjustment: 100 mm Hnjdpfxjygh Ihe Afnjh Max. strokes per minute: 50 SPM Usable strokes per minute: 32 SPM Table clamping surface: 1000 x 740 mm Table plate size: 980 x 710 mm Ram size: 710 x 425 mm Table plate thickness: 100 mm Table opening: D 290 x H 8 mm Ram clamping opening: d 50 HB x 85 mm Motor power: 11 kW Voltage: 380 / 220 V Frequency: 50 Hz Working air pressure: 0.6 Pa Overall dimensions (L x W x H): 1380 x 2400 x 3350 mm Weight: 13,000 kg

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Manufacturer: KOSICE Model: LE 160 C Year of manufacture: 1990 Machine No.: 2291458 Condition: Good / operational Table clamping surface: 1000 x 720 mm Weight: approx. 10,800 kg Width (including control cabinet): 1,500 mm Hsdpfx Ajyghx Tsfnjnh Throat depth: 355 mm Pressing force: 160 tons Stroke rate: 50 / min continuous operation Stroke rate: 30 / min single operation Motor power: 11 kW Ram adjustment: 0 – 100 mm Stroke adjustment: 20 – 120 mm Ram clamping surface: 750 x 380 mm Max. distance ram – table: 450 mm Pass-through hole in table: 480 x 300 mm Air clutch: 6 bar External dimensions: Depth: 2,360 mm Height: 2,850 mm Including: Press safety control Starkstrom Gummersbach Electric auxiliary brake Desch Additional table plate: 900 x 580 mm Two-hand control panel Foot switch Central lubrication Intermediate table Latest safety inspection (UVV): 2024

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 120 h, load capacity: 1,600 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 480 kg, total length: 538 mm, drive type: Elektro, construction width: 726 mm, Low-lift pallet truck Load centre: 600 Mast type: None Technical condition: very good Front tyre type: Polyurethane Front tyre condition: 100% Rear tyre type: Polyurethane Rear tyre condition: 100% Battery voltage: 26V Battery capacity: 150Ah Battery year: 2020 Description: Factory-refurbished used unit by Toyota, including new inspection and new certification in accordance with FEM (formerly UVV). Pulse control, CE certificate, Hnsdpfx Aoyauq Asfneh

Condition: ready for operation (used), Year of construction: 2006, operating hours: 58,670 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, displacement volume: 318 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22,4 Injection pressure 2336 bar Stroke volume 318 ccm Shot weight (PS) 289 gr. Injection rate 143 ccm/s Screw speed 265 1/min Plasticising rate max. 29,3 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,00 x 2,00 x 2,20 m Hedpfsydp Idox Afnsnh Total machine weight 6600 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 - 90 ° Additional Options: - 1 x Air valve - 2 x hydr. core pulls - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2006, operating hours: 68,590 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 50 mm Ls/D ratio 20 Injection pressure 1892 bar Stroke volume 393 ccm Shot weight (PS) 358 gr. Injection rate 177 ccm/s Screw speed 265 1/min Hsdpfx Afeydp D Esnonh Plasticising rate max. 36,2 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,00 x 2,20 m Total machine weight 6600 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0 - 90° Additional Options: - 1 x Air valve - 2 x core pull - Robot interface according to Euromap 67

Condition: ready for operation (used), Machine type: Spotting press Manufacturer: REIS Model: TUS 160 OK 100 Year of manufacture: 1985 Hnedpfx Ajyb Stqsfnsh Condition: used Control type: conventional Stock location: 27751 Delmenhorst Country of origin: Germany Delivery time: short-term Freight basis: EXW / ex works Price: Technical details: Press force: 100 t Table length: 2200 mm Table width: 1550 mm Installation height: 2200 mm Ram return force: 6,000 kg Table load: 10,000 kp Total power requirement: approx. 25-30 kW Machine weight: approx. 28 t Space requirement: approx. 2.95 × 7 × 7 m

Condition: good (used), Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder Hjdpfjb A Nv Sex Afnsnh -Type: SNGB-160 TN34547 -Quantity: 2 pieces available -Price: per piece -Weight: 3.3 kg/piece

Condition: ready for operation (used), Year of construction: 2023, overall weight: 272 kg, This STAUBLI TX2-160 LHE was manufactured in 2023. A robust robot arm, ideal for precise and efficient automation tasks. Contact us for more information about this machine. Additional equipment • Accessories – for Overpressure Unit • Robot is from research project. Approx. 500 hours Machine Benefits Technical Machine Benefits • Reach: 2010 mm • Robot controller // robot-controller cables • Cs9 controller • Handheld control device with mount Hjdpsyam E Eofx Afnsnh • Documentation on dvd • Connectors and accessories • Mode selector switch with cable • Maintenance unit – for overpressure unit • Kit connect ethernet • Kit connect i/o Extra Information Machine still under power

Condition: used, mileage: 46,036 km, power: 115 kW (156.36 HP), first registration: 05/2024, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 06/2026, color: white, emission class: euro6, loading space length: 4,500 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, soot filter, Used Vehicle * Vehicle No.: - 47 * Euro 6 green environmental badge * Daily panel van, Maxi long wheelbase with high roof * Loading length approx. 4.5m x 1.8m x 1.9m * Tow bar with 3,500 kg towing capacity * Digital tachograph * Automatic climate control * 6-speed manual transmission * Rear parking sensors * Multifunction steering wheel * Gross vehicle weight rating (GVWR) 3,500 kg * 3 seats * Partition wall * Cargo area floor and wall lining * Electric front windows * Central locking * Airbag * ABS * ASR (traction control) * German vehicle, 1st registered owner * Original mileage Hnsdpfjx Rk Ndox Afnjh ---- -> Please note that viewings are only possible by prior appointment. Thank you for your understanding. -> Sale is only to businesses or for export. The above data, photos, and equipment list are provided solely for the general identification of the vehicle and do not constitute a guaranteed specification under sales law! All details/accessory information are WITHOUT WARRANTY. Changes, prior sale, and errors expressly reserved! The equipment list does not form part of the contract and must be checked in detail by each interested party on site at the vehicle before concluding the purchase. Subsequent complaints will not be accepted.

Condition: used, mileage: 90,000 km, power: 115 kW (156.36 HP), first registration: 12/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 12/2026, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,500 mm, loading space width: 1,800 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, navigation system, soot filter, Used vehicle * Vehicle No.: 52 * Euro 6 green environmental badge Hnedpfxjw Ttave Afnjh * Daily panel van Maxi long version * Load length approx. 4.5m x 1.8m x 2.1m * Automatic climate control * 8-speed Hi-Matic automatic transmission * Navigation system * Reversing camera * Cruise control * Multifunction steering wheel * GVW 3,500 kg * 3 seats * Partition wall * Load compartment lining: floor and wall * Power windows * Central locking * Airbag * ABS * ASR (traction control) * German vehicle, first owner * Original mileage ---- -> Please note that viewings are only possible by prior appointment. Thank you for your understanding. -> Sale to trade or export only. The above information, photos, and equipment list serve solely for the general identification of the vehicle and do not constitute a guaranteed specification in the legal sense of purchase law! All details/equipment specifications are provided WITHOUT WARRANTY. Subject to changes, prior sale, and errors! The equipment list is not part of the contract and must be checked in detail by each prospective buyer onsite before purchase. Subsequent complaints will not be accepted.

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 32 mm, turning diameter: 320 mm, center height: 160 mm, turning length: 650 mm, three-jaw chuck diameter: 160 mm, For sale here is a lathe from Voest Alpine in good condition! See pictures Manufacturer: Voest Alpine Model: DA-160 Centre height: approx. 160 mm Centre width: approx. 650 mm Turning diameter over bed: approx. 320 mm Turning diameter over cross slide: approx. 190 mm Hnodpfxswq Ehbo Afnoh Spindle bore: approx. 32 mm Three-jaw chuck diameter: approx. 160 mm Tailstock holder: MK3 Accessories included: Four-jaw chuck Ø 160 mm, 6x steel holders, 4x pairs of turning jaws External dimensions of machine: approx. 150x90x180 cm (LxWxH) The machine can be inspected and tested at our premises. Loading option: with stapler or crane Shipping costs on request (by postcode) You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale ex location 42855 Remscheid, free loaded. Errors in technical data and prior sale reserved.

Condition: ready for operation (used), Allmatic-NC LC 160/200 Machine Vice Stage 1 = 15 kN Stage 2 = 30 kN Stage 3 = 45 kN Hnodpfx Afeyilc Ssnsh Stage 4 = 60 kN Pressure sensor is not included in the scope of delivery! You are welcome to come by for an inspection. We can also organize an affordable shipping service for you! You will receive a proper invoice. A net invoice can also be issued for foreign customers, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers as well. All specified company names and trademarks are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the item description are possible and reserved.

Condition: like new (used), Year of construction: 2024, For sale: Felder RL-160 clean air extraction unit with a maximum air volume flow of 3,200 m³/h. The extraction unit is currently in use as a demonstration model in our showroom and is therefore in as-new condition. Technical data: - Max. air volume flow: 3,200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Manual filter cleaning - H3 dust-tested Hjdpfx Afjyh Ai Honjnh - Year of manufacture: 2024 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117