Used Schroeder for sale (68)

Condition: good (used), Year of construction: 1991, Schröder Kombinator emulsify-kombinator, type: EMK 01/3500, building number: 119567, year of construction: 1991, dimensions: 2900 mm x 500 mm x 800 mm. Model: Crystallizer Capacity up to 2.000 kg/h depending on product Product Margarine of shortening Year 1991 Isdoun Tr Tspfx Ag Dsa Power 7,5 kW Pressure Up to 20 bar Weight ± 1500 kg

Condition: reconditioned (used), Bread roll press dough part - kneading machine Fortuna machine greetings 3 Bread roll press 30 - parts With knitting shut-off Dough weight from 960 - 2100 grams Weight of the dough pieces 32 - 70 gram Ijdpohh Dlrefx Ag Dsa Knife head electrically tiltable to the back for cleaning Partial head/knife newly machined second hand machine overhauled working plate and operating instructions incl.

Condition: new, 10 quick-change plates, each with 2 rolling stations (suitable for three-star rollers) Shaft diameter 50 Upper shaft adjustable Iedsur Ncvepfx Ag Dsa Lower shaft centrally adjustable Upper and lower shafts with axial adjustment and counters (We are also happy to offer profile rollers with a corresponding design)

Year of construction: 2020, condition: ready for operation (used), A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible. Ijdot R Tq Iepfx Ag Doa

Condition: good (used), You are bidding on: a branded folding machine (Abkantbank) from a very good and well-known manufacturer – Schröder Device features: - Schröder folding machine - Rail bends cleanly – test possible; barely used, from private owner - Angle indicator - Bending length slightly over 2 m - Sheet thickness 1.5 mm (steel); aluminium, zinc, etc. up to 2 mm - Standard rail – radius for aluminium, zinc is optionally available! - Foot clamping mechanism - Optional: backgauge, additional rails - Schröder guillotine shear - Working length 2 m - Sheet thickness 1.25 mm (steel); aluminium more - 500 mm backgauge Isdpfxswc Nz Ns Ag Dea - Extendable sheet support - Optional additional accessories and tools available, such as tube bars, tool holders, etc. - Suitable electric and manual guillotine shears available on request – please inquire for set price, I will configure accordingly. Important! Optionally, you can find and purchase many machines and accessories for sheet metal and steel processing, such as rails, backgauges – everything related to sheet metal and steel work: folding machines, guillotine shears, drilling machines, slip rollers, slitting and profiling machines, accessory parts (forming roll, beading rollers for gutter forming, backstop, etc.), as well as various hand tools and spare parts from many top manufacturers in the shop. I am always available for questions. You will receive an invoice pursuant to §25a German VAT Act (UStG); VAT is included in the amount. Free loading possible – weight approx. 950 kg and 650 kg. Inspection and testing are possible and encouraged after scheduling a phone appointment. Payment in cash upon collection. Benefit from our experience and expertise; we are happy to advise you at any time. Collection by the buyer (or a freight company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: Item number: Schröder folding machine & guillotine shear 250304

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Iedpfx Agjxn Dhle Doa Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, sheet thickness steel (max.): 3 mm, back gauge: 1,000 mm, back gauge travel distance Z-axis: 1,000 mm, cutting length (max.): 3,200 mm, Selling a Schröder guillotine shear Iodpfx Aovzh Tceg Dsa Model: MHSUV 3200/3.0mm with electric backstop up to 1000mm (see display) The guillotine shear has a sheet metal holding device for thin sheets to prevent ripples when cutting. The special thing about this guillotine shear is that the cutting material is placed at the front, which is rare with this size arrangement. Particularly advantageous for a smaller workshop. The control has a piece goods counter, etc. The knife cuts perfectly and the backstops work absolutely precisely. The guillotine shear is only being sold because we bought a 4-meter guillotine shear. Viewing and testing expressly desired! Sold without any guarantee or return! Price plus VAT

Condition: used, empty load weight: 5,600 kg, maximum load weight: 28,400 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 02/2006, next inspection (TÜV): 06/2024, loading space length: 12,050 mm, loading space width: 2,450 mm, loading space height: 1 mm, suspension: air, tire size: 215/75R17.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axles, BPW axles, air suspension, lifting + lowering, ABS (anti-lock braking system), lashing eyes, U-protection, supports, twin tires, stanchions Structure: 3-axle flatbed trailer with 8x 11t Ecco aluminum stanchions & 4x 9t Ecco aluminum stanchions 3x 8t BPW axles, drum brakes! Loading height approx. 900mm! The trailer has been given a new wooden floor and further work for approx. €8,000.00! Length of loading area below approx. 7600mm! Ijdpst Eb Tgofx Ag Dsa Length of loading area above approx. 4450mm! Width of loading area with stanchions approx. 2450! Width of loading area without stanchions approx. 2260mm! The stanchions can also be used as loading ramps! Stanchions available for an additional charge of €6,000.00 net! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: refurbished (used), SCHRÖDER DM-500 ID.NO. 2117 Schröder DM-500 brine mixer with mixer and pusher that goes up and down. Iedpfxsg R Stis Ag Dsa Dimensions 135 x 135 cm H 180 cm. Available 4x in stock.

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Iodpetphubefx Ag Dsa

Condition: used, empty load weight: 5,600 kg, maximum load weight: 28,400 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 02/2006, next inspection (TÜV): 06/2024, loading space length: 12,050 mm, loading space width: 2,450 mm, loading space height: 1 mm, suspension: air, tire size: 215/75R17.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axles, BPW axles, air suspension, lifting + lowering, ABS (anti-lock braking system), lashing eyes, U-protection, supports, twin tires, stanchions Structure: 3-axle flatbed trailer with 8x 11t Ecco aluminum stanchions & 4x 9t Ecco aluminum stanchions 3x 8t BPW axles, drum brakes! Isdpet Eb Tmsfx Ag Doa Loading height approx. 900mm! The trailer has been given a new wooden floor and further work for approx. €8,000.00! Length of loading area below approx. 7600mm! Length of loading area above approx. 4450mm! Width of loading area with stanchions approx. 2450! Width of loading area without stanchions approx. 2260mm! The stanchions can also be used as loading ramps! Stanchions available for an additional charge of €6,000.00 net! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Year of construction: 2010, condition: ready for operation (used), Working width: 2500mm, bending capacity: 3mm, connected load: 5kVA, weight: 3.5t. Iodskvpgfepfx Ag Dja

Condition: used, empty load weight: 5,600 kg, maximum load weight: 28,400 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 02/2006, next inspection (TÜV): 06/2024, loading space length: 12,050 mm, loading space width: 2,450 mm, loading space height: 1 mm, suspension: air, tire size: 215/75R17.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axles, BPW axles, air suspension, lifting + lowering, ABS (anti-lock braking system), lashing eyes, U-protection, supports, twin tires, stanchions Structure: 3-axle flatbed trailer with 8x 11t Ecco aluminum stanchions & 4x 9t Ecco aluminum stanchions 3x 8t BPW axles, drum brakes! Loading height approx. 900mm! The trailer has been given a new wooden floor and further work for approx. €8,000.00! Length of loading area below approx. 7600mm! Length of loading area above approx. 4450mm! Width of loading area with stanchions approx. 2450! Isdpfxjrvhl Uj Ag Dja Width of loading area without stanchions approx. 2260mm! The stanchions can also be used as loading ramps! Stanchions available for an additional charge of €6,000.00 net! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/1994, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 800 mm, total length: 2,540 mm, total width: 3,000 mm, suspension: air, tire size: 385 / 65 R 22,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, BPW axles, air suspension, 1st axle liftable, last axle positively steered, lifting+lowering, ABS (anti-lock braking system), storage box Iedpfx Asi Rqpqeg Doa last axle positively steered via wedge, intended for mounting roller crane ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: ready for operation (used), Year of construction: 2002, sheet width 3230 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.75 mm Isdjxaaq Hepfx Ag Dsa no. of strokes 34 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control POS 100 air pressure 6.0 bar engine output 6.8 kW weight of the machine ca. 3510 kg range L-W-H 4070 x 2070 x 1400 mm Current new price including accessories approx. 70.000 Euro From a maintenance workshop Very good condition (!!) Special price upon request Features: - Robust / motorized swing cut guillotine shear - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * With SCHRÖDER NC POS 100 control unit * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Coarse adjustment via pushbuttons * Limit value protection with limit switches - "Duo-Cut" drive with two dynamic, powerful gear motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel blade - 1x side stop with T-slot and digital mm scale - 2x extended sheet support arms - Selector switch for single and Continuous stroke - 1x freely movable foot switch - Rear safety device (side guards) - Original operating instructions Optional accessories included: - Pneumatically controlled sheet support device for thin sheet blanks * Sheet removal / sheet slide to the front (operator side)

Condition: excellent (used), Year of construction: 1995, Schroeder HS 2000/1.0 Manual Guillotine Shear Specifications: Manufacturer: Schröder Model: HS 2000/1.0 Ijdpfx Agowhf Ntj Dsa Year of Manufacture: 1995 Working Length: 2000 mm Cutting Thickness: 1.25 mm Collecting Tray Rear Paralleling Device via Handwheel Location: Arrives at Warehouse 54634 Bitburg - Available at Short Notice -

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. Isdpjxyln Rjfx Ag Doa range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), Year of construction: 2002, sheet width 3220 mm Iodoxr Rbajpfx Ag Dja plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed 120 Grad/sec back stop - adjustable 10.0 - 1.000 mm adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 voltage 400 V total power requirement 10.4 kW weight 5950 kg range L-W-H 4565 x 2950 x 2163 mm current list price ~ 150.000 Euro with excellent features (!!) Features: - CNC electromotive universal swing bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-resistant welded construction - Rotating upper beam / as an automatic tool changing system * With 2 tool stations (sharp and goosefoot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Control panel front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swiveling control panel, front right - Servo-inverter-controlled drives * For bending/upper jaw & electric backgauge - CNC electro-motorized lower jaw adjustment - CNC electro-motorized backgauge * Travel speed 300 mm/sec. * With rear sheet metal support surface - 1x freely movable double foot switch - Operating instructions Optional accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool gouge rail - 2x bending rails

Condition: ready for operation (used), Year of construction: 2005, sheet width 3220 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed 120 Grad/sec back stop - adjustable ~ 10.0 - 2.000 mm Ijdpfxsxnqwto Ag Dea adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 total power requirement 10.4 kW voltage 400 V weight 3750 kg range L-W-H 4565 x 2950 x 2163 mm current new price ~ €150,000 from a maintenance workshop with very good equipment (!!) Features: - CNC electro-motor-driven universal folding machine * ??High-precision mechanics with modern control technology * For single and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotating upper beam / as an automatic tool change system * With 2 tool stations (sharp and goat's foot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Touch panel at the front right (can also be operated with a PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Accurate bending simulation * Windows XP operating system - Servo-driven control Drives * for bending/upper beam and electric backgauge - CNC electric lower beam adjustment - CNC electric backgauge * Travel speed 300 mm/sec. * With rear sheet support surface (stainless steel sheets) - 1x freely movable double foot switch - Operating instructions (PDF) Special accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool goat's foot rails, H = 130 mm - 1x 10.0 mm bending rail - 1x 25.0 mm bending rail

Condition: good (used), Year of construction: 2002, sheet width 3220 mm plate thickness 3.0 mm ST thickness at "Niro-steel" 2.0 mm upper clamping bar adjustment 300 mm Iodpfx Aoxcp N Rog Dsa adjustment speed 100 mm/sec 80.0 mm Bending speed 120 °/sec work height max. 869 mm back stop - adjustable 1.0 - 1.500 mm compressed air 6.0 bar control POS 2000 total power requirement ~ 8.8 kW voltage 400 V weight 4380 kg range L-W-H 4575 x 2450 x 1737 mm New price including accessories approx. 110.000 Euro From a maintenance workshop In good condition (!!) - in checked conditions - machinevideo - ?v=8jPsMSxC6pU Equipment: - Motorized universal folding machine "SERVO POWER BEND" * High-precision mechanics with modern control technology * For single and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - SCHRÖDER CNC control model "POS 2000" * With touchscreen control panel * Color display * USB interface * Automatic cutting calculation * Material and tool library * Precise bending simulation * Windows XP operating system - Servo-converter-controlled drives * For bending beam/upper beam & electric backgauge - CNC electric-driven lower beam adjustment - CNC electric-driven backgauge * Travel speed 300 mm/sec. - With rear sheet support surface, including ball transfer units - 1x freely movable double foot switch - 2x front emergency stop buttons - Operating instructions (PDF) * Optional accessories included: - 1x split set of bending rails - bottom (installed) - 1x extra bending rail 25.0 mm - 1x extra bending rail 10.0 mm - 1x extra bending tool for the top - POINT - 1x extra split set of bending tools for the top - GOAT'S FOOT * Tool height 170 mm

Condition: good (used), Year of construction: 2003, sheet width 2520 mm plate thickness 2.50 mm ST thickness at "Niro-steel" 1.50 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm Bending speed 120 Grad/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 voltage 400 V total power requirement 7.2 kW weight 3430 kg range L-W-H 4120 x 2400 x 2090 mm Current new price ~ 100.000 euros From a maintenance workshop With very good equipment (!!) Equipment: - CNC electric motor-driven universal swivel bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotatable upper beam / as automatic tool change system * With 2x tool stations (sharp and goose foot bending rail) * Reduces set-up and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 Iodpfsxbh Euex Ag Doa * Control panel at front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swivel control, front right - Servo converter-controlled drives * for bending/upper beam & electric backgauge - CNC motorized lower beam adjustment - CNC electric motorized backgauge * Travel speed 300 mm/sec. - with rear sheet metal support surface, including ball rollers - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 2007, sheet width 3020 mm plate thickness 2.0 mm bending angle max. 135 ° stroke of upper beam 250 mm Adjustment folding beam 25.0 mm work height max. 935 mm control SCHRÖDER NC total power requirement 6.0 kW weight of the machine ca. 3350 kg. dimensions of the machine ca. 4250 x 2300 x 1900 mm - in checked conditions - machinevideo - ?v=kyDHkc9opN4 Isdpfx Asxacfysg Dsa Features: - Dynamic, powerful motorized folding machine - Used SCHRÖDER NC control unit with LCD display * Manual, setup, and automatic operation * Fast programming of individual parts * Pivoting control panel, right front - NC electro-motorized backgauge with rear sheet support surface - Manual lower beam adjustment - 1x freely movable double foot switch - 1x bending tool set - 2x emergency stop buttons at the front - Operating instructions (PDF)

Condition: used, Year of construction: 1997, sheet width 3230 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes 28 - 42 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control ELGO 87P engine output 6.8 kW weight of the machine ca. 3410 kg. range L-W-H 4070 x 2070 x 1400 mm from a maintenance workshop including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke - 1x freely movable foot switch - safety device at the rear - original operating instructions Ijdpfoxacd Nex Ag Dja Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving

Condition: used, Year of construction: 2003, sheet width 1020 mm plate thickness 4.0 mm distance between columns 1100 mm stroke of upper beam 250 mm Lower beam adjustment 50.0 back stop - adjustable max. 750 mm control POS 400 total power requirement 4.4 kW weight 1960 kg range L-W-H 2065 x 1500 x 1425 mm Equipment: - Robust electric-driven folding machine - With dynamic, powerful drive motors - SCHRÖDER NC control unit "POS 400" * Bending angle preselection * Control panel, right front - Manual backgauge, adjustable from the rear Ijdpfx Agjxab Sls Doa * Adjustment range up to max. 750 mm - Manual lower beam adjustment - 1x freely movable double foot switch - 1x set of bending tools - Emergency stop button at the front - Original operating instructions

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction Ijdpfx Agsxabc Rj Dea - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks