Used Sanding for sale (1,888)

Condition: good (used), Casadei Beta wide belt sanding machine Podjz Smm Sopfx Akierc - Sanding width: 110 cm - One 11 kW motor drives 2 sanding units - First unit: calibrating unit with rubber-coated roller; second unit: sanding shoe, adjustable from the control panel - Digital display of the sanding height - 2 feed speeds

Condition: good (used), Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, We are offering this used Costa Delta TRI-T-T 1350 wide belt sanding machine, manufactured in 2009. The machine has only 2500 operating hours and is in good condition. Further details can be found in the data sheet. Prjdpezx Tgrefx Akijc If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Pjdpjudxchsfx Akiorc Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS Pjdpfxsxqggce Akijrc 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 2019, Manufacturer: MHG, Type: SMG 160, Year of manufacture: 2019, Serial number: 9264, including stationary dust extraction unit, manufacturer: Eferest, Type 100 l, Serial number: 18-673-1-4, 12 bar, Year of manufacture: 2018, dust collector, Model 1703-2.2, air flow rate 1,800 m³, 2.2 kW, stainless steel container, 3 wheels, mobile, capacity approx. 100 l +++ ATTENTION: This item is part of an online auction! +++ Prjdpfx Akoz Tqy Rsisc

Condition: like new (used), Working width: 300 mm Mechanical oscillation Grinding with a shoe-shaped grinding pad only Two-stage feed speed Weight: approximately 450 kg Star-delta motor starter Podpsxp I Dmofx Akisrc Safety switch 380 V

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Total power 14 kW First calibrating unit with steel roller Second combination unit with rubber roller Working width 950 mm Two carpet feed speeds Electric table height adjustment Predpfezx T Rdex Akisc Shoe with adjustable activation time Oscillation with photocells CE marking Year of manufacture 2007

Condition: like new (used), working width: 1100 mm unit with steel roller 2nd unit rubber with pad motor power: 11 kW oscillation via photocells 2 conveyor feed speeds pad automatically triggered with adjustment units switched on from the control panel Psdjzyaazjpfx Akierc material thickness sensor year of manufacture: 2002

Condition: excellent (used), working width 1100 mm calibrating unit with metal roller calibrating unit with rubber roller combination unit with rubber roller and pad activation of machine functions from the control panel pneumatic oscillation pneumatic belt tensioning motor power: 9KW and 9KW, total power 18.5 KW two feed speeds for the conveyor Podpfx Aozyafwjkiorc material thickness gauge two feed speeds for sanding belts emergency stop switch

Condition: excellent (used), functionality: fully functional, Working width: 1100 mm Two feed speeds 1 unit with rubber roller 2nd unit with segmented pad Total power: 15 kW Pneumatic oscillation Adjustable pad pressure Podpfezxp N Njx Akijrc

Condition: excellent (used), functionality: fully functional, working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Prsdjzz Nmmspfx Akijc

Condition: used, JOHANNSEN Type T 95 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Predpezryw Dofx Akiec Technical data: - Grinding length: approx. 2,780 mm - Grinding width: approx. 950 mm - Motor: 6 kW

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 840, Of course, again in the same style: NS LMD2500 wide belt sanding machine – year of manufacture 2009 For sale: NS LMD2500 wide belt sanding machine, year of manufacture 2009. Professional industrial wide belt sanding machine from NS Máquinas, suitable for sanding and finishing metal workpieces. A reliable machine for leveling, grinding, and finishing surfaces, among other applications. Predpfx Akoz H Rckeijc The machine was used in our production process and is being offered for sale due to the cessation of our business activities. Machine specifications: - Brand: NS - Type: LMD2500 - Year of manufacture: 2009 - Wide belt sanding machine - Suitable for metalworking - For grinding, sanding, and surface finishing - Robust industrial design - Includes: [optional accessories / extraction system / sanding belts] The LMD2500 is suitable for manually and precisely finishing larger metal parts and offers a great deal of flexibility for various workpieces and finishes due to its long sanding belt. The machine is currently still installed and can be inspected in working order by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical information are available upon request. If you have more machines, please send them along with the brand, type, and year of manufacture. This will allow me to maintain exactly the same advertisement structure for all TOWA machines.

Condition: excellent (used), Catalog number: 7810 TECHNICAL DATA max. width of the workpiece 630 mm max. height of the workpiece 110 mm 2 units: 1) ribbed rubber roller for calibrating 2) ribbed rubber roller for calibrating + shoe + metal roller *from above: metal sliding feed roller unit metal sliding roller unit sliding roller, metal *from below: 2 metal sliding rollers conveyor belt 2 metal sliding rollers pneumatic belt oscillation 2 types of feed speed motor 2 x 7.5 kW electric table lifting working pressure 6-8 bar diameter of the dust extraction nozzle 2 x 160 mm overall dimensions L/W/H 1650x1060x1970 mm weight 972 kg – Polish production – 2 units Psdpjzxhihsfx Akisrc – unpainted – very good condition – used grinder Net price: 25,900 PLN Net price: 6,020 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, The Volpato LS 1N is a universal machine designed for sanding edges, profiles, and shaped components made of wood as well as other materials. It combines user-friendly operation with high versatility – it can be equipped with a sanding belt, sanding disc, or milling unit. The robust construction and high-quality Italian workmanship ensure long service life and reliable performance even under demanding conditions. The machine features chain feed with stepless speed control from 4 to 20 m/min, pneumatic belt tensioning, and an oscillation system for even abrasive utilization. Precise adjustment of the pressure shoe allows for both fine contour sanding and precise calibration. Technical Data Sanding Belt Belt size: 2450 × 80 mm Unit tilt: 0–135° Belt speed: 7–14 m/s (2 speeds) Motor: 1.5 kW Oscillation: 0–20 mm Extraction port: Ø 100 mm Net weight: approx. 100 kg Sanding Disc Max. diameter: 220 mm Max. width: 90 mm Unit tilt: 0–180° Rotational speed: 900 rpm Motor: 1.5 kW Extraction port: Ø 100 mm Net weight: approx. 90 kg Milling Unit (optional) Cutter diameter: 140–160 mm Pjdpfxsxlquts Akisrc Unit tilt: 0–90° Rotational speed: 0–6000 rpm (with inverter) Motor: 4 kW Spindle diameter: 35 mm Extraction port: Ø 100 mm Net weight: approx. 90 kg Feed System Type: Chain drive with rubber inserts Feed speed: 4–20 m/min (infinitely variable) Dimensions and Weight (LS 1N model) Length: 2450 mm Height: 1400 mm Depth: 1900 mm

Condition: used, Technical data: - Grit size: 180 - Width: 1,250 mm Podpfx Akszry Dkjisrc

Condition: good (used), Year of construction: 2017, Deburring/grinding machine from Costa Type MD4 VC 1150 Belt width 1150 mm Vacuum table For grinding and minimal edge rounding Predpfx Ako Aayf Uoiec Equipped with an AL-KO dust extraction system (excluding filters)

Condition: used, total width: 1,800 mm, total height: 2,320 mm, total length: 1,700 mm, Year of manufacture: 1999 Colour: White Empty weight: 2.500 kg - Year: 1999 - CE marking present: Yes - Serial number: 99125681 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Top - - Type of unit: Contact roller - - Sanding belt length [mm]: 1890 - - Sanding belt width [mm]: 1110 - - Roller diameter [mm]: 175 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: Pedpfszr Hx Uox Akijrc - - Position: Top - - Type of unit: Contact roller - - Sanding belt length [mm]: 1890 - - Sanding belt width [mm]: 1110 - - Roller diameter [mm]: 1750 - - Roller material: Rubber - - Motor power [kW]: 18.5 - Max. working width [mm]: 1100 - Min. working height [mm]: 30 - Max. working height [mm]: 183 - Infeed table length [mm]: 400 - Outfeed table length [mm]: 250 - Feed motor [kW]: 0.75 - Voltage [V]: 380 - Current consumption [A]: 36 - Fuse [A]: 63 - Transport dimensions: 1700mm x 1800mm x 2320mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 007614, Max. machining width: 1300 mm Working Table: adjustable Vacuum feed belt: yes Prsdpfxex A Tatj Akiec No. Operating units: 3 Nr

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding shoe and finish sanding for coated surfaces. Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Edge banding machine with a combination unit and electronic articulated pressure beam, with edge segments that can be switched on and off. Segment width of the pressure beam: 35 mm. Contact roller can be pneumatically adjusted, low wear due to a ribbed steel roller. Grain size compensation. Drive motor 7.5 kW with automatic motor brake, infinitely variable belt speed controlled by a frequency inverter from 2 - 18 m/s. Belt feed can be infinitely adjusted via a frequency inverter from 2.5 - 13 m/min. Psdpfx Akozqvmreierc Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900 mm by adjusting the upper part of the machine, allowing it to be integrated into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm. Workpiece height approx. 3 to 150 mm. Common sanding belt dimensions 1360 x 1900 mm. 3 rubber-coated pressure rollers. Infeed roller table and fold-down outlet table. Preparation for vacuum blower. The belt is perforated, and connectors for an optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm, and 2 x 100 mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure beam engagement points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the connection cable shown in the picture. Original paint, only touched up in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller".

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Holp Rototop RT121 / MS08 Sandwich / Year of manufacture: 2024 / In stock & immediately available Price: €11,990.00 net / €14,268.10 gross - Suitable for excavators from 7 to 12 tons - Own weight approx.: 104 kg - Max. breaking / ripping force: 80 kN - Rotation, hydraulic swivel: 25 – 45 liters - Revolutions / min: 5 – RPM We have many other Holp products in our warehouse that are immediately available! Mr. Herden (phone number available upon request) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! Internal ID: 120859 Prodpfxsznrtce Akijc = Further information = Year of manufacture: 2024 Intended use: Construction Please contact Marius Herden for further information.

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Podpfxs Aflwye Akijrc

Condition: excellent (used), CATALOGUE NUMBER: 6929 TECHNICAL DATA - Length of workpiece: 2800 mm - Width of workpiece: 950 mm - Main motor: 5.5 kW - Fan motor: 2.2 kW - Width of abrasive belt: 160 mm - Diameter of dust extraction nozzle: 185 mm - Rotation: clockwise/counterclockwise - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight: approximately 1000 kg ADVANTAGES – Unpainted – Made in Germany Pjdpfx Ao Af Itgekiorc – Complete documentation (DTR) – Used sander, very good condition Net price: 8900 PLN Net price: 2070 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (price may be subject to change in case of significant exchange rate fluctuations)

Year of construction: 1996, condition: used, Max. working width: 1100mm, voltage/frequency: 400V/50Hz, current: 74A. Inspection by appointment possible. Prsdpfjz A An Dox Akioc

Condition: new, Year of construction: 2026, Extec C12 HD / Extec C12 / Sandvik QJ341 – crushing jaws made of 18%Mn2%Cr and 22%Mn, fixed and moving jaw, complete set of J470HDE / J471HDE jaws. Complete set of crushing jaws for Extec C12 HD, Extec C12, and Sandvik QJ341 crushers, made of 18%Mn2%Cr manganese steel. Prjdpfs Agtulex Akijc Fixed jaw: J470HDE / J4700000 – 18%Mn2%Cr Moving jaw: J471HDE / J4710000 – 18%Mn2%Cr A version with 22% manganese content is also available – in stock! Available for immediate delivery – shipped from Poland! Jaws available as a set or individually. Catalog numbers: J470HDE, J4700000, J471HDE, J4710000 Sales and delivery terms: Prices are quoted EXW – Putz Recycling warehouse, Poland (Incoterms® 2020). We also offer the option of purchasing on DAP terms – with delivery to the specified location worldwide. Transportation costs are quoted individually. Other spare parts: We also offer wedges, pins, side liners (cheek plates), and other spare parts. Guaranteed casting quality! As one of the few, we offer castings with a chemical composition confirmed by spectrometric analysis and a QUALITY CERTIFICATE. Don't risk buying cheaper, lower-quality castings! Reduced manganese or chromium content can reduce the lifespan of the jaws by up to half. Wide range of spare parts for crushers and screeners! We have the widest range of spare parts for crushers and screeners in Poland – for both stationary and mobile machines. We offer parts for machines from brands such as: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubblemaster, Sandvik, SBM, Tesab, and many others. Information regarding the origin of the parts: The offered parts are high-quality aftermarket replacements and are not original parts from the machine manufacturer (OEM). The names of manufacturers, machine models, and catalog numbers have been used solely for the purpose of identifying the intended use and compatibility of the offered products.