Used Rotary Grinding Machine for sale (65,780)

Condition: ready for operation (used), Contact Belt Grinder LÖSER KS 360 for grinding pipes / round material - Abrasive belt length: 2500 mm - Abrasive belt width: 5 - 75 mm - Material grinding length: endless - Grinding range / diameter: 3 - 70 mm Pgodoywy Ddjpfx Acvoi - Belt speed: 7.5 - 34 m/s - Contact wheel diameter: 100 - 225 mm - Motor power: 1.6 / 2.6 kW Dimensions (LxWxH): 1.2 x 0.6 x 1.8 meters / Weight: 350 kg Subject to errors and omissions.

Condition: excellent (used), Jones & Shipman 624 Dominator CNC Surface Grinder Pgsdpfxju D H Uho Acvji Under power and working. Can be shown demonstrating at our premises in Burscough Fanuc Series 210i-M CNC Control Table Length 600mm x 200mm width Wheel diameter 250mm Wheel width 25mm Max wheel speed 3200rpm Spindle power 5.6kw

Condition: excellent (used), Grinding diameter capacity ~80 mm (Type 2H) Type 2HA variant ~120 mm Maximum in-feed grinding length ~200 mm Maximum through-feed grinding length ~300 mm (with normal guides) Grinding wheel diameter 400 mm Grinding wheel width 200 mm Grinding wheel bore 203.2 mm (8") Driving wheel diameter 254 mm Driving wheel width 200 mm Driving wheel bore Pgjdpfx Aexrvgzecvoi 127 mm Main drive motor 11 – 22 kW Driving wheel motor ~1.1 kW Driving wheel speed ~10 – 200 rpm (continuously variable) Machine weight ~3,000 kg Footprint / Dimensions ~2,400 × 1,550 mm Voltage 380 V / 50 Hz / 3-phase Extras & Features Hydraulic dressing and trueing devices for both grinding wheel and driving wheel Variable speed drive on the regulating/driving wheel Base flange, support bridge, shims, and additional accessories included in many units The “2HA” variant extends capacity to 120 mm diameter parts. We have two of these machines available.

Year of construction: 1988, condition: used, Eubama S5 Rotary Transfer Machine Serial Number 5531 Pgodpfxsdg Da Is Acvji Year 1988 Pristine Condition Not been used for 15 years

Year of construction: 2009, condition: good (used), GRUNWALD HITTPAC AKH-059/2 Item: GRUNWALD Hittpac AKH-059/2 Grunwald-Cup Filling Machine diverse, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Podsl D T D Tjpfx Acvogi Year of production: 2009 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Stainless steel control panel, hanging on the machine with servo controller (make: Elau) and touchscreen operator panel. Machine has polycarbonate glass safety guards. Documentation (instruction, parts manual and electric scheme) in German available CEE machine, incl. complete documentation

Condition: ready for operation (used), functionality: fully functional, grinding length: 2,100 mm, grinding spindle motor power: 7,500 W, overall weight: 3,000 kg, REFORM straight knife grinder Swivelling magnetic table length 2100 mm Overhauled, in perfect working condition Pgjdpfx Aceywfi Eevoi Grinding wheel support Front and rear knife stops Coolant pump, central lubrication through the spindle 7.5 kW spindle motor Automatic mechanical infeed

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Lizzini IG-FL in like-new condition: - Year of manufacture: 2019 - Siemens control - 2 external grinding wheels - 1 internal grinding spindle Psdpfx Acjyubc Uevogi - C-axis - controlled B-axis Suitable for non-cylindrical (Capto) grinding Distance between centers: 1000 mm Center height: 200 mm

Condition: used, Year of construction: 1980, workpiece length 2700 mm swing dia. 630 mm clamping length 2700 mm stroke position adjustment 40-130 mm grinding wheel diameter 1000 mm weight of the machine ca. 18,5 t dimensions of the machine ca. 9x4 m cyclic control CNC / Simatic S7-300 steady rest hydraulic pre-positioning manual fine tuning (Vertical u. Horizontal) Pgjdpfx Aceyukdzsvsi grinding wheel flanges rough turning fixture Radial- and side turning fixtures manual Radius turning fixture filtering system Polo inclined bed filter SB-A0.4 manufactured in 2012 grinding wheels storage system for 8 grinding wheels diverse machine tools steady rest jaws diverse irrigation nozzle (workpiece cooling) washer cover with edge lavage Indexierledges for quick workpiece slide position lifting device for grinding wheels manipulation diverse spare parts sliding cover left and right diving plate and clampinserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2009, internal diameter max. 600 mm grinding depth max. 800 mm grinding length max. 600 mm control Siemens 840 D grinding diameter - internal max. 600 mm grinding diameter - cylindrical max. 800 mm workpiece length - max. 380 mm external grinding length max. 600 mm travel - x1 axis 150 mm travel - z1 axis 1100 mm travel - x2 axis 470 mm travel - z2 axis 800 mm workpiece spindle 8,5 kW turning speed range - stepless 1-795 U/min Equipment / Accessories: Workpiece spindle unit (U/B1/L adjustment): - Travel (U-axis): 300 mm - Swivel angle (B1 axis): -0,5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Set-up speed (jogging): 10 rpm - Spindle head size A 8 according to DIN 55026 - Through-hole 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (overhung clamping) max. 800 mm - Workpiece length (clamped between centers) max. 800 mm - Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): - Travel (Z1 axis): 1100 mm - Travel (X1 axis): 150 mm - Swivel angle (B2 axis): 270° - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Drive power of the internal grinding spindles (infinitely variable) Belt-driven grinding spindles: 7.5 kW - Grinding block mounting hole (diameter): 100 mm / 125 mm - Mounting length of sanding block: 220 mm - Sanding diameter: max. 600 mm - Sanding depth: max. 800 mm External and surface sanding device (Z2/X2): - Travel (Z2 axis): 800 mm Pgsdpfewp S Tnsx Acvoi - Travel distance (X2 axis): 470 mm - Swivel angle (B2 axis): 270° - Drive power of the external grinding spindles: 7.5 kW - Grinding block mounting hole: Ø 140 mm - Sanding diameter: max. 800 mm - Sanding length max. 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm

Condition: used, Year of construction: 2016, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks Pjdsw I Uv Ujpfx Acvsgi ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: good (used), Year of construction: 1987, We offer you: Jig Grinding Machine Manufacturer: HAUSER Model: S3-DR Year of manufacture: 1987 Technical specifications: Travel: - X-axis: 400 mm - Y-axis: 250 mm - Z-axis: 300 mm Accessories, depicted tools and clamping devices are included in delivery only if specified in the additional information. Subject to changes and errors in technical data and information, as well as prior sale! Pgedpfx Acjxw Sx Rsvsi

Condition: defective spare-parts repository (used), We offer you: Cylindrical grinding machine Manufacturer: Karstens For spare parts The main spindle grinding head is missing Accessories, illustrated tools, and clamping devices are only included if stated in the additional information. Pgjdpfx Acoxxxrtsvji Subject to changes and errors in technical data and details, as well as prior sale!

Condition: used, Year of construction: 2001, grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control Siemens 840D passage width 1300 mm electro-magnetic table 4200 x 1300 mm grinding height 550 mm grinding motor 306 kW grinding motor turning speeds up to 370 U/min grinding motor feed, infinitely variable 0,5-35 m/min coolant flow rate 2000 l/min weight of the machine ca. 50 t dimensions of the machine ca. 11,21 x 5,25 x 3,85 m Equipment / Accessories: - segment head - diameter 1400 mm - for segment dimensions 120/106 x 41 x 250 mm Psdpfethumusx Acvogi - number of segments: 1 set = 26 pieces - grinding motor adjustment - in steps: 0,002 - 1 mm - continuous: up to 5 mm/min stepless

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Technical details: Clamping table surface: 300 x 700 mm Electro-magnetic chuck: 300 x 600 mm Maximum travel: 640 mm x 320 mm Max. distance spindle center / table: 520 mm Max. workpiece weight*: 200 kg Grinding wheel: 300 x 30 x 75 mm Table speed, hydraulic: 2 - 18 m/min Automatic cross feed: 0.5 – 10 mm/stroke Rapid traverse, cross: 990 mm/min Graduation on handwheel: 0.02 mm Automatic vertical feed: 0.01 / 0.1 mm Rapid traverse, vertical: 360 mm/min Graduation on handwheel: 0.01 mm Grinding spindle motor: 4.0 kW Spindle speed: 1,440 rpm Hydraulic pump motor: 1.5 kW Length x width x height: 2,000 x 1,650 x 1,850 mm Weight approx.: 1,400 kg Surface Grinding Machine Bernardo FSM 3060 AHD 2-axis digital readout ES-12 H with LCD display Control with touch operation Electronic handwheel Grinding wheel Wheel flange LED work light Pgjdpfx Aoyut A Tscvei Electro-magnetic chuck Balancing stand Balancing arbor Protective covers Demagnetizing unit Coolant system Diamond dresser Machine mounts Central lubrication Operating tools

Year of construction: 1999, condition: ready for operation (used), Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible. Pedoywy Rqjpfx Acvogi

Condition: repair required (used), TSCHUDIN HTG400 sold as a parts donor. Mechanically, the machine is in good condition; electrically, it must be checked and repaired. The drive motors are functional. The same applies to the internal cylindrical grinding machine TRIPET AR 200 with internal grinding attachment and face grinding attachment. Pedpfx Ajyt E Irjcvsgi Both machines are being offered for parts.

Condition: good (used), Year of construction: 1999, functionality: fully functional, grinding belt width: 100 mm, grinding belt length: 950 mm, Equipment: CE marking, We are offering here a belt sanding machine from delNegro Elektromaschinen und Apparatebau. This is an AS 90 model with a 100 mm sanding width. Contact us for a quote. Pgodpoywarhofx Acvei

Condition: excellent (used), functionality: fully functional, Grindable diameter from 2 to 40 mm. Smallest and largest point angle: 40 – 180°. For right- and left-cutting tools, 1-12 cutting edges. Suitable for sharpening twist drills, step drills, and taps. Accessories and an operating manual are included. Pgodpfsyuta Ssx Acvoi

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding length: 900 mm, TECHNICAL DETAILS Maximum grinding length: 900 mm Distance between centers: 600 mm Height of centers (standard): 125 mm Height of centers with raised headstock and tailstock blocks: 175 - 250 mm Maximum swing diameter with riser blocks: 350 - 500 mm Table swivel / each side: 10° Table reversal dwell time: 0 - 5 s Diameter / width / bore: 250 x 13 x 76 mm Grinding wheel spindle speeds: 360 rpm Cross movement of grinding wheel head: 285 mm Rapid infeed and retraction of wheel head: 40 mm Intermittent feed per table reversal: 0.001 - 0.03 mm Micro-adjustment of feed, 1 division on dial: 0.001 mm Continuously variable working speeds (normal / special): 20 - 400 / 10 - 400 rpm Pgsdpfxsytf Tbo Acvoi MACHINE DETAILS Control type: Conventional

Condition: used, Jung F 50 Surface Grinding Machine Condition: Used Technical Data Podpfx Acsyuy Euovogi Grinding Length: 500 mm Grinding Width: 200 mm Grinding Height to Spindle Center: 285 mm Table Size: 700 x 200 mm Spindle Speed: approx. 3000 rpm Grinding Wheel: 225 x 20 x 51 mm Feed: manual via handwheel Rapid Traverse Wheel Dressing Device Dimensions (L / W / H): approx. 1850 mm / 1300 mm / 1750 mm Weight: approx. 1400 kg

Condition: good (used), Year of construction: 1994, Grinding length max. 650 mm Pjdpsvz A Stefx Acvegi Grinding width 390 (max. 450) mm Distance from spindle center to table 600 mm max. Workpiece weight 350 kg Grinding area 650 x 390 mm Travel paths: X-axis 840 mm Y-axis 500 mm Z-axis 410 mm Total power requirement 15 kVA Machine weight approx. 3.0 t Space requirement approx. 4.0 x 3.0 x 2.5 m

Condition: good (used), - All rubber rollers new or as good as new - Belt length 3000 mm Pgodeulvipspfx Acvoi - Year of manufacture - Price On request

Condition: good (used), Year of construction: 1994, completely overhauled in 1994 Table length: 450 mm Table width: 180 mm Execution: Hydraulic Maximum distance between table and spindle center: 400 mm Longitudinal travel (X-axis): 550 mm Cross travel (Y-axis): 200 mm Automatic vertical feed Grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Pedow R Tl Hepfx Acvegi Grinding wheel speeds: from 2800 rpm Digital display Weight: 1,000 kg

Condition: used, 1 cylindrical grinding machine Podoyf Dn Uopfx Acvegi Manufacturer: Tschudin Model: HTG 400 Year of manufacture: 1967 Centre distance: 400 mm Centre height: 100 mm Taper: MK4 Spindle speed: Max. table travel: 420 mm Table swivel at 15° Grinding wheel: Ø 300 mm Insertable tailstock MK3

Condition: excellent (used), Year of construction: 2001, 1 CNC cylindrical grinding machine Make: Buderus Model: CNC-335-I-A Year of manufacture: 2001 CNC control: Siemens 840C Largest external machining range: 150 mm Largest swing diameter above table: 310 mm Table strokes X-axis: 1050 mm Pgsdewcrnfepfx Acvji Z-axis: 300 mm Workpiece speeds NC programmable: 0 - 3000 rpm Infeed speed continuously adjustable: 0.01 - 10 mm/min Infeed stroke dependent: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Machine weight approx.: 7.5 tons