Used Roofer Elevator for sale (712)

Condition: used, mileage: 264,166 km, power: 300 kW (407.89 HP), first registration: 09/2009, fuel type: diesel, empty load weight: 15,650 kg, maximum load weight: 10,350 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,300 mm, brakes: constant throttle, color: black, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 4,600 mm, loading space width: 2,380 mm, loading space height: 900 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, fog lights, low noise, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, steel body, integrated cab, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, air horn, Telligent gear shift, 16-speed manual transmission, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, differential lock, fog lights, rotating beacon, storage box, leaf suspension, Bordmatik on the left, trailer coupling with air, light, and hydraulics, low-noise G1, underrun protection, roof hatch, rear-mounted crane, emergency stop, grab control, elevated seat, 2-point hydraulic support, 1x hydraulic extension, green environmental badge. Fedpfox Avk Iex Alfjgf Wheelbase: 3300 mm. Body: Meiller two-way tipper body with Bordmatik (left) and rear crane Penz 10.83SH with elevated seat. 7.5t front axle, rear axle H7 13t, 300 ring gear, Telligent brake system with ABS and ASR, ABS can be deactivated, disc brakes with full protection at front and rear axles, rear axle stabilizer, steel bumper, PSM, prepared for toll recording, illuminated Mercedes star, distribution cockpit, refrigerator box, reinforced clutch, Telligent Shift II, Webasto Thermo Top 90 auxiliary hot water heater, jobsite filter, On-Board Diagnostics 2, protective plate under radiator and engine, increased engine cooling performance, gearbox oil cooling, MB 124-10c MPA power take-off with N/M speed. Load diagram: 4m – 2,600 kg, 6m – 1,800 kg, 8m – 1,300 kg! Grab available at extra cost! VIN: WDB9321611L441438! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to alterations, prior sale, and errors excepted.

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm + Elevating spiral screw “Heckmann” all stainless steel discharge height: ± 5.800 mm Fgsdjzg U Dzspfx Alfsf diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: ready for operation (used), Suitable for twist-off caps Suitable for screw caps Capacity: up to 30,000 caps per hour Magnetic elevator belt Fgsdpfx Aljy A Tk Ijfsf

Condition: new, Maximum tank capacity: 60 L Lifting and tilting function Battery life: 8 hours Battery: 2 x 12 Ah Charging current: 230 V Control panel: 24 V Motor power: 500 W + 140 W Net weight: 115 kg Stainless steel construction Mobile unit on casters User-friendly control panel Battery level display Automatic tank locking Tank can be tilted at any height Increased lifting height available upon request Adaptable to any type of tank Dimensions: 820 x 810 x 2200 mm Top width: 965 mm Usable height: 1550 mm Key advantages Mobile tank lifter suitable for professional use in catering and hospitality settings Lifting and tilting function to facilitate unloading Stainless steel construction for a clean and durable work environment Easy movement thanks to integrated casters Battery-powered operation without permanent connection Control screen indicating battery charge level Automatic tank locking in the arms Tank can be tilted at any required height depending on the application Higher lifting height available upon manufacturer's request Adaptable to any type or brand of tank according to configuration Detailed technical specifications Model: LIFTO 60 Type of equipment: Mobile tank lifter with tilting function Brand: Sinmag Europe Maximum tank capacity: 60 L Tilting: Yes Battery life: 8 hours Battery capacity: 2 x 12 Ah Charging current: 230 V Control panel: 24 V Motor power: 500 W + 140 W Net machine weight: 115 kg Total height: 2200 mm Width: 820 mm Depth: 810 mm Top width: 965 mm Usable height: 1550 mm Construction: Stainless steel Mobility: Mobile unit on casters Power supply during use: Batteries, without permanent electrical connection Fgodpfjzk Hf Eex Alfef Battery control: Control screen for battery charge level Manufacturer's warranty: 2 years

Condition: used, Year of construction: 2026, Overview This Ferrero AV 9/12/1VA automatic triblock, built in 2026, is designed for filling vegetable edible oil into Marasca-type glass bottles. The block combines a 9-clamp air rinsing station, a 12-valve high-vacuum filling station and an AROL EAGLE VA-IES single-head capping station for ROPP 31.5 x 24 mm aluminum screw caps in one compact AISI 304 stainless steel machine with a nominal output of 2,000 bottles/hour (750 ml). The machine is new and unused. Format tooling for four Marasca sizes (250 / 500 / 750 / 1,000 ml), nitrogen injection before capping, a 7-inch Siemens SIMATIC HMI touchscreen in English and remote diagnostics via Ethernet are included - ready for immediate use. Please note: an optional mechanical caps elevator is available on request; it is not included in the sale price. Technical data - Manufacturer: Ferrero (Italy) - Model: AV 9/12/1VA - Year of manufacture: 2026 - Machine type: rinser - filler - capper triblock for glass bottles Fgodpfszkkp Ijx Alfef - Product: vegetable edible oil, ambient filling temperature - Rinsing: 9-clamp air rinsing turret - Filling: 12-valve high-vacuum filling turret - Capping: AROL EAGLE VA-IES single head, ROPP 31.5 x 24 mm aluminum caps - Capacity: 2,000 bottles/hour nominal (750 ml) - Bottle formats: Marasca 250 / 500 / 750 / 1,000 ml (tooling included) - Bottle diameter range: 55 - 110 mm; height range: 180 - 350 mm - Control: 7-inch Siemens SIMATIC HMI touchscreen (English) - Electrical supply: 400 V three-phase, 50 Hz; 8 kW installed power - Compressed air: approx. 435 Nl/min at 6 bar - Construction: AISI 304 stainless steel; CE marking Equipment - Air rinsing station with AISI 304 grippers, EPDM pads and maintenance-free TWIST rotation - High-vacuum filling station in AISI 304 and food-grade materials, steam or chemical sterilizable - Polished AISI 304 product tank with level indicator, height adjustment and tool-free lid - AROL capping station with vibrating cap dispenser, cap level detector and missing-cap detection - Worm screws, star wheels and conveyors for Marasca formats - Nitrogen injection before capping (gas supply by the customer) - Photocells at inlet and outlet, remote diagnostics via Ethernet - Full AISI 304 safety enclosure with LEXAN inspection doors and safety microswitches Condition New - built in 2026. The machine can be viewed and tested in operation on request. Availability Immediately available. Location: Italy.

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences Fsdpjzl D Exjfx Alfsgf General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: used, Baumann NUP 20 FO stacking lift with lifting platform Top condition available at short notice Format: max 1,800 x 1,300 mm Load capacity: max 2,000 kg Fgsdpfx Alozkt Iyjfjf Lifting height: 1,000 mm Weight: 790 kg approx.

Condition: used, mileage: 157,091 km, power: 309 kW (420.12 HP), first registration: 05/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, color: white, gearing type: mechanical, emission class: euro6, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Technical Data: * Gross Vehicle Weight: 26,000 kg / 28,000 kg (with special permit) * 1st Front Axle: 9,000 kg * Tag Axle: 7,500 kg * 1st Rear Axle: 11,500 kg ----Technical Scope of Delivery: * Steering Arrangement: Left-hand drive * Wheelbase: 2600+1350 mm * Rear Frame Overhang: 1250 mm * Engine: D2676LF53 - 420 hp / 309 kW EURO6 SCR - 2100 Nm C-R OBD-C * Transmission: MAN ComfortShift * Gearbox: ZF 16 S 223 DD * Fuel Tank: Aluminum 290 l on the left and 24 l AdBlue * Front Axle: VOK-09, angled * Tag Axle: LOL-08, steered - liftable * Front Springs: Parabolic 9.5 t * Rear Springs: Air * Instrument Panel: km/h 'High-Line' * Steering Wheel: Adjustable in height and inclination * Braking System: MAN BrakeMatic (Electronic Braking System) * Rear Axle: Hypoid HY-1350 * Axle Ratio: i = 3.08 * Differential Lock: In rear axle * Wheels: Disc, 10-hole (various sizes on front, rear and tag axles) ----Equipment: * Cab: 'M', 2240 mm wide, 1880 mm long * Seat Covers: Comfort quality * Driver's Seat: Air-suspended with lumbar support, shoulder adjustment and heating * Passenger Seat: Static, adjustable in length, backrest and height * Front Flap: Can be unlocked from inside * Vehicle Keys: Two additional keys * Interior Door Panel: Fabric * Air Conditioning: AC R134A, CFC-free, with automatic temperature control * Tachograph: Digital, manufacturer CONTI Fsdpeyvx Apjfx Alfegf * Air Intake: Elevated with dry air filter * Exhaust: Side, right, with ground outlet * Driver's Seat: Air-suspended with armrests * Cab Mounts: Air-suspended * Windows: Tinted (windshield, door windows, side windows) * Mirrors: Heated and electrically adjustable * Central Locking: With remote control * Navigation System: MAN Media Truck Advanced 12 V with 7" color display and navigation SD card Europe * Hands-free System: "Comfort" for 2 mobile phones (MFL and Bluetooth® compatible) * Rear View Camera: Preparation for 1 camera (MAN CameraView) * Lighting System: LED daytime running lights, halogen double headlights H7, high and low beam headlights with cornering lights * Tires: * Front Axle: 2 x BS 385/65R22.5 R-ST001 TL 160 & K * Tag Axle: 2 x BS 385/65R22.5 R-ST001 TL 160 & K ----Colors: * Chassis: Graphite black RAL 9011 * Wheels: White aluminum RAL 9006 * Cab: Light grey RAL 7035 ----Additional Equipment: * Underrun Protection: Round at the rear, front * Trailer: Trailer coupling RINGFEDER 4040 G150 A for central axle trailer * Batteries: 12 V 175 Ah (2 pcs) * Cruise Control: Available * Speed Limiter: Electronic 89 km/h * Sound System: MAN Sound System * Video Function: Via USB/SD interface * Telematics: Telematics On-Board Module (TBM3/RIO ready) * Cab: Without sleeper, without mattress ----* Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/80R22.5 * Fuel tank: 290 l * AdBlue tank: 24 l * Technical gross vehicle weight: 28000 kg * Tare weight: 11450 kg * Permissible trailer load: 26470 kg * Overall length: 6850 mm * Wheelbase: 2600+1350 mm * Inspection Due: 01.2026 ----Vehicle Number: 11935----Errors and prior sale reserved----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicleTÜV/SP inspectionComplete export processingArrangement of financing

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 2x5 tiers Fgodpezf Akgefx Alfjf product height: ± 100 mm cooking time min/max : 4-40 min max. temperature: 200°C automatic elevator with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 turning to the left

Condition: used, mileage: 394,873 km, power: 355 kW (482.67 HP), first registration: 07/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 10,419 mm, total width: 2,550 mm, total height: 3,900 mm, loading space volume: 15 m³, loading space length: 6,450 mm, loading space width: 2,480 mm, loading space height: 950 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, DAF XF 480 FAN 6x2 Palfinger Crane VIN: G338269 -- The stated price does not include a trailer -- Chassis / Components: * Leaf / Air suspension * Liftable / Steerable axle * Wheelbase: 4,800 mm / 1,350 mm * Tires: 1st and 3rd axle: 385/65 R.22.5, 2nd axle: 315/80 R22.5 * Remaining tire tread: Front: ~30%, Middle: 20%, Rear: 50/60% * 1 x Aluminum tank * 1 x AD-Blue tank * 1 x Palfinger hydraulic tank * 2 x PVC storage boxes * Fixed trailer coupling * Duomat+2 hose Body: * Zikun body * Body dimensions: 6.45 m x 2.48 m x 0.95 m * Front wall: 1.80 m * Perforated outer frame * Side walls: 0.95 m with telescoping function * Crane: Palfinger PK 20.501 L TEC 3 * Load chart: max: 5,500 kg, 5.9 m = 3,200 kg, 8.4 m = 2,150 kg, 10.9 m = 1,640 kg * 3 x Extension * Rear supports * Elevated seat Cab / Driver's cab * XF cab, flat roof / long cab * 2 x Bunks * Roof hatch * Automatic climate control * Auxiliary heater * Navigation system Fodpfszqwzdex Alfogf * Hands-free system * CD radio * 2 x Rotating beacons * Lamp bar with 4 headlights Engine / Transmission * 355 kW / 480 hp // 12,902 cm³ // Euro 6d * ZF-TraXon / Automatic * ZF-Intarder * Differential lock Weights * Gross vehicle weight: 26,000 kg * Payload: 12,040 kg * Unladen weight: 13,960 kg Other * German vehicle * 1 previous owner * Valid until 01 / ----New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and a transfer of your purchased vehicles within Germany is also possible. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Due to our many years of experience in the areas of refurbishment and sales of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As we value customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organizing special transports We will gladly help you in organizing special transports. Day license plates / export license plates We will gladly help you obtain export license plates / short-term license plates. Handling customs formalities We will gladly help you with handling customs matters.

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. Fjdpfx Ajzlic Nslfsgf The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: excellent (used), functionality: fully functional, Tennant Type: T7+ ec-H2O™ Compact design with high maneuverability Item description: Clean hard floors comfortably, efficiently, and economically: with the battery-powered Tennant ride-on scrubber-dryer T7+. Thanks to its compact design, the ride-on machine is suitable for tight spaces and narrow aisles. The optional ec-H2O-NanoClean technology ensures reduced water and cleaning agent consumption. Compact design – ideal for aisles and elevators. Clear lines of sight and easy-to-use controls. Optimal water extraction – no cleaning agent residue. Optional ec-H2O-Clean technology for reduced cleaning agent consumption. Easy-to-clean, hygienic tanks. Low noise level of 67 dB(A). Automatic brake and parking brake. Available with various working widths. Includes battery, on-board charger, and brush. Technical details: Area of application: Indoor Operation: Battery Voltage: 24 V Battery type: Gel battery Battery capacity: 240 Ah/per unit Frequency: 50 - 60 Hz Travel speed: 6.4 km/h Direction of travel: Forward, Reverse Noise level in dB(A): 67 dB(A) Fjdpfx Alsziiu Hjfjgf Fresh/dirty water tank removable: No Tank volume fresh water: 110 l Tank volume dirty water: 110 l Theoretical area performance: 5120 m²/h Practical area performance: 5120 m²/h Working width: 800 mm Brush diameter: 400 mm Brush speed: 260 rpm Brush pressure: 36 - 73 kg Brush motor power: 450 W Brush-assisted drive: No Brush shut-off: Automatic, Yes Tire material: Rubber Number of wheels: 3 Wheels leave no marks: Yes Wheel width: 80 mm Wheel diameter: 250 mm Turning radius: 1840 mm Operator cockpit: Yes Squeegee blade material: Linatex Squeegee width: 1000 mm Vacuum motor power: 450 W Body color: Teal Frame color: Teal Height: 1270 mm Width: 740 mm Depth: 1270 mm Weight: 443 kg Version with ec-H2O™ Rim material: Polyamide Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, mileage: 394,873 km, power: 355 kW (482.67 HP), first registration: 07/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 10,419 mm, total width: 2,550 mm, total height: 3,900 mm, loading space volume: 15 m³, loading space length: 6,450 mm, loading space width: 2,480 mm, loading space height: 950 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, DAF XF 480 FAN 6x2 Palfinger Crane VIN: G338269 -- The stated price does not include a trailer -- Chassis / Components: * Leaf / Air suspension * Liftable / Steerable axle * Wheelbase: 4,800 mm / 1,350 mm * Tires: 1st and 3rd axle: 385/65 R.22.5, 2nd axle: 315/80 R22.5 * Remaining tire tread: Front: ~30%, Middle: 20%, Rear: 50/60% * 1 x Aluminum tank * 1 x AD-Blue tank * 1 x Palfinger hydraulic tank * 2 x PVC storage boxes * Fixed trailer coupling * Duomat+2 hose Body: * Zikun body * Body dimensions: 6.45 m x 2.48 m x 0.95 m * Front wall: 1.80 m * Perforated outer frame * Side walls: 0.95 m with telescoping function * Crane: Palfinger PK 20.501 L TEC 3 * Load chart: max: 5,500 kg, 5.9 m = 3,200 kg, 8.4 m = 2,150 kg, 10.9 m = 1,640 kg * 3 x Extension * Rear supports * Elevated seat Cab / Driver's cab * XF cab, flat roof / long cab * 2 x Bunks * Roof hatch * Automatic climate control * Auxiliary heater * Navigation system * Hands-free system * CD radio * 2 x Rotating beacons * Lamp bar with 4 headlights Engine / Transmission * 355 kW / 480 hp // 12,902 cm³ // Euro 6d * ZF-TraXon / Automatic * ZF-Intarder * Differential lock Weights * Gross vehicle weight: 26,000 kg * Payload: 12,040 kg * Unladen weight: 13,960 kg Other * German vehicle * 1 previous owner * Valid until 01 / ----New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and a transfer of your purchased vehicles within Germany is also possible. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Due to our many years of experience in the areas of refurbishment and sales of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As we value customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Fgsdpjzqhxyjfx Alfjf Loading of vehicles We will gladly help you with loading your purchased vehicles. Organizing special transports We will gladly help you in organizing special transports. Day license plates / export license plates We will gladly help you obtain export license plates / short-term license plates. Handling customs formalities We will gladly help you with handling customs matters.

Condition: excellent (used), power: 615 kW (836.17 HP), overall weight: 46,300 kg, tire size: 24.00R35, tire condition: 90 %, Year of construction: 2020, operating hours: 7,819 h, Equipment: air conditioning, CATERPILLAR 775G Sales and delivery date: 2021 Year of construction: 2020 Operating hours: 7.819 hrs ROPS Radio Fgodpfxozdi Txe Alfof Airco back drive camera body heating body elevation central lubrication Bridgestone tyres 24.00-R35 – approx. 90% good C27 engine with 615kW CE operation weight: 46.3 tons

Year of construction: 2014, condition: ready for operation (used), travel distance X-axis: 1,600 mm, total width: 1,250 mm, total height: 3,437 mm, spindle motor power: 5,500 W, product length (max.): 3,080 mm, spindle speed (max.): 1,600 rpm, number of axes: 3, This 3-axis M+A RB 63/20 W drilling machine was manufactured in 2014. It features a maximum drilling diameter of 63 mm in steel and 80 mm in cast iron, with a maximum reach from the column of 2000 mm. The machine includes a robust cube table measuring 800 x 630 x 500 mm. If you are looking to get high-quality drilling capabilities, consider the M+A RB 63/20 W machine we have for sale. Contact us for further details. Fedpfjzk Ivxsx Alfegf - Maximum drilling diameter in steel (600 MPa): 63 mm- Maximum drilling diameter in cast iron (250 MPa): 80 mm- Maximum reach from column: 2000 mm- Minimum reach from column: 450 mm- Column diameter: 450 mm- Minimum distance between spindle nose and baseplate: 400 mm- Maximum distance between spindle nose and baseplate: 1600 mm- Spindle inner taper: MT 5- Maximum spindle stroke: 400 mm- Vertical adjustment of drill head: 800 mm- Horizontal adjustment of drill head: 1550 mm- Baseplate length: 2900 mm- Baseplate width: 1250 mm- Baseplate height: 260 mm- Number of spindle speeds: 16 (hydraulically set)- Spindle speed range: 20 to 1600 rpm (20, 32, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 1000, 1600 rpm)- Number of spindle feeds: 16- Spindle feed sizes range: 0.04 to 3.2 mm/rev- Maximum permissible torque at spindle: 980 Nm- Main drive motor power: 5.5 kW (1500 rpm)- Arm elevating motor power: 2.2 kW (1500 rpm)- Clamping motor power: 0.75 kW (1500 rpm)- Coolant pump power: 90 W / 0.09 kW (3000 rpm, Flow rate: 25 l/min, Head: 4 m)- Machine total power: 8.45 kW- Operating voltage: 400 V / 50 Hz- Required connection current: 16 A- Maximum load capacity/weight: Approx. 7000 kg- Machine overall dimensions: 3080 x 1250 x 3290 mm (Max height up to 3437 mm)- Noise emission level: ≤ 85 dB (A)

Condition: used, mileage: 436,700 km, power: 331 kW (450.03 HP), first registration: 01/1989, fuel type: diesel, empty load weight: 18,150 kg, maximum load weight: 7,850 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,500 mm, brakes: retarder, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro1, suspension: steel, loading space volume: 2 m³, loading space length: 2,500 mm, loading space width: 2,490 mm, loading space height: 400 mm, Equipment: ABS, crane, differential lock, Vintage Scania R143 450 V8 6x4 semi-trailer tractor/flatbed truck with heavy-duty crane with German H-registration/MOT valid until June 2027. First registration: 1/1989 436,700 km with documentation Long cab with 2 beds Manual transmission Retarder Trailer coupling 6x4 drive Leaf spring suspension Tires 385/65 R22.5, tread depth approx. 70% Tires 12 R22.5, tread depth approx. 70% Wheelbase 3500mm Removable flatbed 2500mm x 2490mm x 400mm Unladen weight 18,150 kg Fedpeyt Sq Hofx Alfogf Crane Palfinger PK 45000 C Year of construction 1988 Control from elevated operator seat 4-point outriggers 5 total extensions 4 hydraulic extensions + 1 mechanical extension 2.10m / 15,000 kg 4.30m / 10,060 kg 6.00m / 7,030 kg 7.90m / 5,260 kg 10.00m / 4,110 kg 12.20m / 3,370 kg 14.70m / 2,670 kg (mechanical extension) Hook height approx. 18.50 meters The vehicle is in good condition. It was last used sporadically as an ADAC roadside assistance vehicle. German vehicle registration document with H-registration (vintage vehicle). MOT valid until June 2027. Export/net price: 59,900 Euros All information without guarantee, errors and omissions excepted.

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data - Capacity: 14.000 bph - Filling product: carbonated water and soft drinks  - OPP wrap-around label from a reel with hotmelt and glue labelling station - Packaging formats: shrink wrapping without tray - Pallet: Euro pallet (1.200 x 800 mm)  - condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Fgjdpfx Aeyb Tuiolfef Bottle dryer | ACI | 2015 Labelling machine | Krones Contiroll | 2004 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009

Condition: used, Year of construction: 2016, Overview  This cap feeding system consists of a vertical cap elevator, a centrifugal distributor, and a horizontal flat top air conveyor. The system was used for feeding 38 mm flat plastic caps in PET bottling applications. It has been dismantled, stored in a warehouse, and is immediately available. Technical data  - Formats: Flat 38 mm plastic caps - Dimensions: L 210 cm × W 75 cm × H 300 cm - Power supply: 0.2 kW - Application: PET bottles Scope of Delivery Fjdpfxew T S Raj Alfsgf - Vertical cap elevator | Marmoinox | AML-ZVE1 | 2016 - Centrifugal distributor | Sacmi | - | 1997 - Horizontal flat top air conveyor, 2 m | Sacmi | - | 1997

Condition: used, Year of construction: 2003, Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  - Capacity: 4.000 bph  - 4 cavities - Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  - space requirement approx. 22 m² (incl. preform feeding system) - Bottles - 1,0 l PET - 0,5 l PET - 0,33 l PET Scope of delivery  Fsdpfx Ajwizc Eelfsgf Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor.

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 Fgedpfx Aljwh U Avofef - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Condition: used, Year of construction: 2001, Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  - Capacity: 3.600 bph  - 3 cavities - Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  - space requirement approx. 9x5 m²  - weight: 4,5 t  - Operating hours: 19.935   - Bottles - Volume: 250 ml - 2500 ml   Fedpfjl Hxprjx Alfjgf - Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).

Condition: used, Year of construction: 2000, Overview Fgsdpfx Alsl Hxpnofof The KSB3000 blowing machine was manufactured in 2000 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  - Capacity: 3.600 bph  - 3 cavities - Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  - Space requirement approx. 9x5 m²  - Weight: 4,5 t  - Operating hours: 23.824   - Bottles - Volume: 250 ml - 2500 ml   - Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).

Condition: used, Year of construction: 2006, Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  - Output: up to 7,200 bph - 4 cavities - Dimensions: 4960 mm x 3900 mm x 3000 mm  - Weight: 15 t  - Operating hours: 44.736  - Bottles - Volume: 200 ml - 2000 ml   - Max. Diameter: 115 mm  - Max. Length: 350 mm - Preforms  - Length: 60 - 200 mm - Max. Support ring diameter: 35 mm  Fgodpfjl Hxpkjx Alfef Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)

Condition: new, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: diesel, overall weight: 550 kg, maximum load weight: 500 kg, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, Secure yours now: Special offer – discount on all tracked dumpers! The 500S tracked dumper stands for powerful material transport, precise unloading, and reliable technology. With its hydraulic lifting function up to 1,200 mm, it is the ideal solution for direct unloading into containers, trailers, or elevated loading areas – efficient, safe, and time-saving. Thanks to its compact dimensions, high payload, and robust construction, the 500S tracked dumper is perfectly suited for confined construction sites, uneven terrain, and professional continuous operation. Your advantages: Fgedpfxeyml D Hj Alfof ✅ Hydraulic lifting and tilting function 90° for comfortable unloading ✅ Lifting height up to 1,200 mm – ideal for containers and trailers ✅ Powerful Koop 173 diesel engine, 4.0 kW, EU Stage V ✅ High payload of 500 kg with compact external dimensions ✅ Optimal traction thanks to wide tracked chassis ✅ Stable, low-maintenance, and durable design ✅ Ideal for construction, landscaping, municipal services, and agriculture Technical data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Weight: 550 kg Payload: 500 kg Hopper volume: 200 dm³ Hopper dimensions: 1,050 × 730 × 730 mm Lifting and Tilting Function: Maximum lifting height: up to 1,200 mm Tilting height: 1,050 mm Tilting distance: 220 mm Tilting angle: 90° Operation: hydraulic Chassis: Chassis type: tracked chassis Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track width: 520 mm Performance: Travel speed: up to 4 km/h Climbing ability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions L × W × H: 1,570 × 880 × 1,450 mm Chassis width: 700 mm Application areas: The 500S tracked dumper impresses everywhere where reliability, maneuverability, and lifting performance are required: Construction and civil engineering Gardening and landscaping Municipal services Agriculture Material handling in confined spaces 🔥 CLEARANCE SALE: DISCOUNT ON ALL TRACKED DUMPERS The 500S tracked dumper is immediately available and ready for use. Ideal for those looking for a robust, powerful, and compact transport solution for professional use. Special price with discount: 3,100 € net plus VAT. Location: Rheda-Wiedenbrück Inquire now and secure your price advantage! ➡️ The offer is valid for a limited time only and while supplies last.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 7972040, PAPER STACKER LIFT POLAR Fgodpfxezmf Uwj Alfof