Used Rolling Scissors for sale (7,231)

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 3100 x 275 Hydraulic Side Roller Adjustment 3 Digital Displays Hydraulic Drop-End Hardened Rolls Cone Bending Device Separate Control Panel Roll Length: 3100 mm Top Roll Diameter: 275 mm Nledjxrduyjpfx Aa Eek Side Roll Diameter: 220 mm Total Motor Power: 16.5 kW Weight: 10,300 kg Dimensions (mm): 5900 x 1750 x 1860 (L x W x H) Bending Performance Data 12 mm at minimum inside diameter (5 x top roll) 10 mm at minimum inside diameter (1.5 x top roll) Pre-bending Performance Data 10 mm at minimum inside diameter (5 x top roll) 8 mm at minimum inside diameter (1.5 x top roll) All bending capacities are calculated on the basis of 250 N/mm² yield strength material (ST 37 – ST 42 structural steel). The images shown are for illustrative purposes only.

Condition: new, Year of construction: 2025, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, roller diameter: 95 mm, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop Nedpfxsxn Rrqo Aa Eslk - Documentation - 400V

Condition: ready for operation (used), functionality: fully functional, Technical Data – SENY D75B: Rolling Pressure: 220 kN Workpiece Diameter: min. 3 mm – max. 70 mm Maximum Pitch: 6 mm Maximum Groove Pitch: 2.25 mm Maximum Roll Width: 160 mm Roll Diameter: min. 133 mm – max. 170 mm Roller Shaft Rotational Speeds: 24 – 30 – 38 – 45 – 62 – 72 – 90 – 114 rpm Roll Holder Shaft Diameter: 54 mm standard – 69.85 mm special Distance Between Shafts: min. 135 mm – max. 230 mm Working Stroke: max. 15 min Feed Rate: 0.5 mm/s – 6 mm/s Rolling Time: 0.1 s – 100 s Pause Time: 0.1 s – 100 s Main Motor Power: 5.5 kW Electrical Consumption: 8.6 kW Reservoir Capacity: 130 liters Weight: approx. 2,100 kg. Additional rolls available: Nodpfxoxm Stge Aa Eslk M4.5 x 0.75 ISO. M6 ISO. M10 ISO.

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST shaft length 140 mm roll diameter 62.0 mm Nledpoxaciljfx Aa Ejk throat 100 mm total power requirement manuell kW weight of the machine ca. 50.0 kg dimensions of the machine ca. 560 x 220 x 500 mm Display machine - like new Never been used (!!) Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft

Condition: good (used), functionality: fully functional, Year of construction: 2011, Biko 3128 – Plate Rolling Machine (2011) High-quality 3-roll plate bending machine for professional metal fabrication. Well maintained and ready for work. Technical Specifications Model: Biko 3128 Year of manufacture: 2011 Nlodpfx Aajx Dx Hzj Esk Rolling type: 3-roll, initial pinch Max. plate width: 3100 mm Max. bending capacity: 28 mm (depending on material grade) Top roll diameter: To be confirmed Side roll diameter: To be confirmed Motor power: To be confirmed Control system: Hydraulic, with adjustable side rolls Cone bending capability: Yes Machine construction: Heavy-duty welded frame Safety: Emergency stop & foot pedal control Condition Machine is in very good working condition Regular service history Test run possible Included Foot pedal Hydraulic adjustments Dimensions & Weight (Confirm exact values with seller) Length: 5.0 m Width: 1.8 m Height: 1.6 m Weight: 12,000 kg

Condition: used, Rolling Machine Brand: JAMMES PROMECAM Type: HC 1310 Maximum thickness: 10 mm Maximum length: 3040 mm Rolling capacity: 1500 mm Upper roller diameter: 300 mm Nodpfswf Ndijx Aa Eelk Side roller diameter: 220 mm Working speed: 0 to 7 m/mm Hydraulic control 1 hp motor Hydraulic unit motor: 5.5 kW Weight: 7000 kg Dimensions: 5100 x 1000 x 1000 mm Type: 4-roller rolling machine

Condition: new, Ostas 4-Roll Plate Bending Machine 4R OHS 2570 x 275 Hydraulic Side Roll Positioning 3 Digital Displays Hydraulic Drop-End Hardened Rolls Cone Bending Device Separate Control Console Roll Length: 2570 mm Top Roll Diameter: 275 mm Side Rolls Diameter: 220 mm Total Motor Power: 16.5 kW Weight: 9500 kg Dimensions (mm): 5350 x 1750 x 1950 (L x W x H) Bending Performance Data 16 mm at minimum inside diameter (5 x top roll) 12 mm at minimum inside diameter (1.5 x top roll) Pre-bending Performance Data 12 mm at minimum inside diameter (5 x top roll) 10 mm at minimum inside diameter (1.5 x top roll) Nodpfsxrdn Hjx Aa Ejlk All bending capacities are based on 250 N/mm2 yield strength Material (ST 37 – ST 42 structural steel) The images shown are for illustration purposes only.

Condition: new, plate thickness 4 mm roll diameter 125 mm throat 200 mm total power requirement 2,2 kW weight of the machine ca. 0,48 t Nledpfod Iim Aox Aa Eek dimensions of the machine ca. 1,6 x 0,6 x 1,2 mm • 5 speeds • With foot control • With brake motor • With emergency stop • With hydraulic roller adjustment • With 4 roller sets

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14I/9064, Offer Number: M14I/9064 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW62 Constr. year: 1974 diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 55 mm output pieces/min: 300 Location: Germany Nlsdpfjxnytqex Aa Eek

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 2.5 mm ST shaft length 250 mm roll diameter 96.0 mm throat 160 mm roll speed 6.0 + 13.0 U/min. total power requirement 1.5 kW weight 350 kg range L-W-H 1400 x 550 x 1120 mm Display machine - like new Never been used (!!) Special price upon request Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements Nsdpfxsxachzj Aa Eslk - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame

Condition: new, Year of construction: 2025, – 4 rollers – Capacity: 1270 x 4.5 mm – Pre-bending capacity: 1270 x 3.5 mm – Hardened rollers Nlsdpfx Aexdvafoa Ejk – Top roller diameter: 130 mm – Bottom roller diameter: 110 mm – Side roller diameter: 110 mm – Digital display for left roller movement – Digital display for central bottom roller movement – Digital display for right roller movement – Steel construction ST-52 – Documentation – 400V

Condition: refurbished (used), PICOT rolling machine Machine under construction Type RPS 2006 G Useful length 2000mm Max thickness 6mm Max end diameter 4mm Roller diameter 160mm Mim radius 80mm Nsdovt Sqpepfx Aa Eslk

Condition: new, Ostas 4-Roller Plate Rolling Machine 4R OHS 2570 x 250 Hydraulic Side Roll Adjustment 3 Digital Readouts Hydraulic Drop-End Hardened Rolls Conical Bending Device Separate Control Panel Roll Length: 2570 mm Top Roll Diameter: 250 mm Side Roll Diameter: 200 mm Total Motor Power: 7.5+1.5 kW Nljdpoxrdcdsfx Aa Eok Weight: 6300 kg Dimensions (mm): 4550 x 1550 x 1470 (L x W x H) Bending Performance Data 10 mm at minimum inner diameter (5 x top roll) 8 mm at minimum inner diameter (1.5 x top roll) Pre-bending Performance Data 8 mm at minimum inner diameter (5 x top roll) 6 mm at minimum inner diameter (1.5 x top roll) All bending capacities are calculated based on 250 N/mm² yield strength Material: ST 37 – ST 42 structural steel The images shown are for illustration purposes only.

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg Nsdsfv H Edspfx Aa Eolk dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M14I/9063, Offer Number: M14I/9063 Nledpfxexnyrto Aa Esk Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: FL-10-80 Constr. year: 1985 diameter range: 10 mm shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 400 Location: Germany

Condition: new, plate thickness 1.20 mm throat 270 (140) mm distance between roll centers 60.0 mm total power requirement manuell kW weight of the machine ca. 46.0 kg dimensions of the machine ca. 600 x 250 x 500 mm Furnishing: - various replacement rollers - hand crank - front stop Nodpfx Aaoxabmcs Ejlk

Year of construction: 2013, condition: good (used), Scissors lifting table with driven roller conveyor - second-hand - Price (net) ex location: only 1.500.-€, dismantled and loaded! Manufacturer: Schwinghandl Year of construction: 2013 Type: roller conveyor / scissor lift Length of roller conveyor: unknown Width element approx. 75cm Nsdsfwr Uqopfx Aa Ejlk roll length: approx. 68cm roll width: approx. 5cm Element height: approx. 15cm lifting height: currently approx. 78,5cm Motor: SEW condition: good Available: immediately Location: Zwickau, later warehouse Frankenberg (Saxony)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller model: 4 axis with digital readout, number of rollers: 4, roller (top) diameter: 360 mm, side roll diameter: 320 mm, roller diameter: 400 mm, roller length: 3,050 mm, working width: 3,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 26 mm, overall weight: 17,400 kg, total length: 5,500 mm, total width: 2,010 mm, total height: 1,900 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4RH17/5NC capacity 3000 x20 mm 4roll plate bending machine NC Imcar year 2016 Capacity plate width 3000 mm Plate thickness 20 mm Prebend 16 mm Central rolls 360 mm Side rolls 320 mm Surface useful on rolls 3050 mm Power supply 380/50 electric 25 Hp on centralized hydraulic unit Nedpfxoxqyxls Aa Eelk Weight 17 Ton Dimension 5500x 2010 x H 1900 mm Configuration as shown on photo enclosed Hardened rolls very high surface resistance Conical bending attachment Digital readout NC programmable 4 axis Central support vertical motorized Roller table with hydraulic side arm Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells

Condition: new, plate thickness 1,25 mm throat 130 mm total power requirement 0,75 kW weight of the machine ca. 180 kg dimensions of the machine ca. 1,1 x 0,6 x 1,2 m Flanging machine is equipped with: - Emergency switch - Footswitch Nlodpfovn U Dnjx Aa Ejk - 8 pcs. Roll sets

Condition: used, Year of construction: 2022, plate thickness 4.0 mm throat 260 mm Nedpfx Aajxaazlo Ejlk distance between roll centers 132 mm stroke 55.0 OW mm tool adaptor Ø 35 mm, 12 mm Nut mm total power requirement 3.0 kW weight of the machine ca. 450 kg. range L-W-H 1600 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - hydraulic adjustment of the upper roller, with pressure gauge - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: repair required (used), functionality: not functional, Year of construction: 1977, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 435 mm, side roll diameter: 435 mm, roller diameter: 435 mm, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, overall weight: 35,000 kg, total length: 8,000 mm, total width: 2,500 mm, total height: 2,720 mm, power: 40 kW (54.38 HP), input voltage: 380 V, Equipment: centralized greasing system, emergency stop, swiveling upper roller, 3roll plate bending machine 2500x40 mm Sertom -Italy Nedsxqq Iqopfx Aa Ejlk Rollers length 2550 mm -Top roll 435 mm -Side rolls 435 mm Capacity rolling -plate width 2500 mm -plate thickness 40 mm -pre-bend 35 mm We sell as is Machine need hydraulic repair DIMENSION 8000X2500XH2720 MM WEIGHT 35 ton POWER INSTALLED 50 Hp

Condition: new, plate thickness 0,8 mm throat 180 mm roll diameter mm Njdpfjht R Hmex Aa Eelk weight of the machine ca. 22 Kg dimensions of the machine ca. 500 x 450 x 160 mm Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: new, plate thickness 2.5 mm Nlodpsxaaw Hefx Aa Esk throat 260 mm distance between roll centers 92.0 mm weight 295 kg range L-W-H 1200 x 700 x 1200 mm Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Shaft length 140 mm roll diameter 62.0 mm throat 100 mm roll speed 16.0 + 32.0 U/min engine output 0.75 kW weight 135 kg range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Nodpfxjxaaf Rs Aa Eslk Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame

Condition: used, Year of construction: 2021, plate thickness 1.25 mm throat 250 mm distance between roll centers 62.0 mm engine output 0.7 kW weight 170 kg range L-W-H 700 x 600 x 1300 mm Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 4x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment Njdpfx Ajxaaccea Eelk - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation